xref: /freebsd/sys/contrib/device-tree/src/arm64/st/stm32mp231.dtsi (revision 8ccc0d235c226d84112561d453c49904398d085c)

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
/*
 * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
 */
#include <dt-bindings/clock/st,stm32mp25-rcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/regulator/st,stm32mp25-regulator.h>
#include <dt-bindings/reset/st,stm32mp25-rcc.h>

/ {
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			compatible = "arm,cortex-a35";
			reg = <0>;
			device_type = "cpu";
			enable-method = "psci";
			power-domains = <&cpu0_pd>;
			power-domain-names = "psci";
		};
	};

	arm-pmu {
		compatible = "arm,cortex-a35-pmu";
		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>;
		interrupt-parent = <&intc>;
	};

	arm_wdt: watchdog {
		compatible = "arm,smc-wdt";
		arm,smc-id = <0xb200005a>;
		status = "disabled";
	};

	clk_dsi_txbyte: clock-0 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <0>;
	};

	clk_rcbsec: clk-64000000 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <64000000>;
	};

	firmware {
		optee: optee {
			compatible = "linaro,optee-tz";
			method = "smc";
			interrupt-parent = <&intc>;
			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
		};

		scmi {
			compatible = "linaro,scmi-optee";
			#address-cells = <1>;
			#size-cells = <0>;
			linaro,optee-channel-id = <0>;

			scmi_clk: protocol@14 {
				reg = <0x14>;
				#clock-cells = <1>;
			};

			scmi_reset: protocol@16 {
				reg = <0x16>;
				#reset-cells = <1>;
			};

			scmi_voltd: protocol@17 {
				reg = <0x17>;

				scmi_regu: regulators {
					#address-cells = <1>;
					#size-cells = <0>;

					scmi_vddio1: regulator@0 {
						reg = <VOLTD_SCMI_VDDIO1>;
						regulator-name = "vddio1";
					};
					scmi_vddio2: regulator@1 {
						reg = <VOLTD_SCMI_VDDIO2>;
						regulator-name = "vddio2";
					};
					scmi_vddio3: regulator@2 {
						reg = <VOLTD_SCMI_VDDIO3>;
						regulator-name = "vddio3";
					};
					scmi_vddio4: regulator@3 {
						reg = <VOLTD_SCMI_VDDIO4>;
						regulator-name = "vddio4";
					};
					scmi_vdd33ucpd: regulator@5 {
						reg = <VOLTD_SCMI_UCPD>;
						regulator-name = "vdd33ucpd";
					};
					scmi_vdda18adc: regulator@7 {
						reg = <VOLTD_SCMI_ADC>;
						regulator-name = "vdda18adc";
					};
				};
			};
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";

		cpu0_pd: power-domain-cpu0 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
		};

		cluster_pd: power-domain-cluster {
			#power-domain-cells = <0>;
			power-domains = <&ret_pd>;
		};

		ret_pd: power-domain-retention {
			#power-domain-cells = <0>;
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupt-parent = <&intc>;
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
		always-on;
	};

	soc@0 {
		compatible = "simple-bus";
		ranges = <0x0 0x0 0x0 0x80000000>;
		interrupt-parent = <&intc>;
		#address-cells = <1>;
		#size-cells = <1>;

		hpdma: dma-controller@40400000 {
			compatible = "st,stm32mp25-dma3";
			reg = <0x40400000 0x1000>;
			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&scmi_clk CK_SCMI_HPDMA1>;
			#dma-cells = <3>;
		};

		hpdma2: dma-controller@40410000 {
			compatible = "st,stm32mp25-dma3";
			reg = <0x40410000 0x1000>;
			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&scmi_clk CK_SCMI_HPDMA2>;
			#dma-cells = <3>;
		};

		hpdma3: dma-controller@40420000 {
			compatible = "st,stm32mp25-dma3";
			reg = <0x40420000 0x1000>;
			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&scmi_clk CK_SCMI_HPDMA3>;
			#dma-cells = <3>;
		};

		rifsc: bus@42080000 {
			compatible = "st,stm32mp25-rifsc", "simple-bus";
			reg = <0x42080000 0x1000>;
			ranges;
			#address-cells = <1>;
			#size-cells = <1>;
			#access-controller-cells = <1>;

			i2s2: audio-controller@400b0000 {
				compatible = "st,stm32mp25-i2s";
				reg = <0x400b0000 0x400>;
				#sound-dai-cells = <0>;
				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_BUS_SPI2>, <&rcc CK_KER_SPI2>;
				clock-names = "pclk", "i2sclk";
				resets = <&rcc SPI2_R>;
				dmas = <&hpdma 51 0x43 0x12>,
				       <&hpdma 52 0x43 0x21>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 23>;
				status = "disabled";
			};

			spi2: spi@400b0000 {
				compatible = "st,stm32mp25-spi";
				reg = <0x400b0000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SPI2>;
				resets = <&rcc SPI2_R>;
				dmas = <&hpdma 51 0x20 0x3012>,
				       <&hpdma 52 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 23>;
				status = "disabled";
			};

			i2s3: audio-controller@400c0000 {
				compatible = "st,stm32mp25-i2s";
				reg = <0x400c0000 0x400>;
				#sound-dai-cells = <0>;
				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_BUS_SPI3>, <&rcc CK_KER_SPI3>;
				clock-names = "pclk", "i2sclk";
				resets = <&rcc SPI3_R>;
				dmas = <&hpdma 53 0x43 0x12>,
				       <&hpdma 54 0x43 0x21>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 24>;
				status = "disabled";
			};

			spi3: spi@400c0000 {
				compatible = "st,stm32mp25-spi";
				reg = <0x400c0000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SPI3>;
				resets = <&rcc SPI3_R>;
				dmas = <&hpdma 53 0x20 0x3012>,
				       <&hpdma 54 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 24>;
				status = "disabled";
			};

			spdifrx: audio-controller@400d0000 {
				compatible = "st,stm32h7-spdifrx";
				reg = <0x400d0000 0x400>;
				#sound-dai-cells = <0>;
				clocks = <&rcc CK_KER_SPDIFRX>;
				clock-names = "kclk";
				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
				dmas = <&hpdma 71 0x43 0x212>,
				       <&hpdma 72 0x43 0x212>;
				dma-names = "rx", "rx-ctrl";
				access-controllers = <&rifsc 30>;
				status = "disabled";
			};

			usart2: serial@400e0000 {
				compatible = "st,stm32h7-uart";
				reg = <0x400e0000 0x400>;
				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_USART2>;
				dmas = <&hpdma 11 0x20 0x10012>,
				       <&hpdma 12 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 32>;
				status = "disabled";
			};

			usart3: serial@400f0000 {
				compatible = "st,stm32h7-uart";
				reg = <0x400f0000 0x400>;
				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_USART3>;
				dmas = <&hpdma 13 0x20 0x10012>,
				       <&hpdma 14 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 33>;
				status = "disabled";
			};

			uart4: serial@40100000 {
				compatible = "st,stm32h7-uart";
				reg = <0x40100000 0x400>;
				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_UART4>;
				dmas = <&hpdma 15 0x20 0x10012>,
				       <&hpdma 16 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 34>;
				status = "disabled";
			};

			uart5: serial@40110000 {
				compatible = "st,stm32h7-uart";
				reg = <0x40110000 0x400>;
				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_UART5>;
				dmas = <&hpdma 17 0x20 0x10012>,
				       <&hpdma 18 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 35>;
				status = "disabled";
			};

			i2c1: i2c@40120000 {
				compatible = "st,stm32mp25-i2c";
				reg = <0x40120000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupt-names = "event";
				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_I2C1>;
				resets = <&rcc I2C1_R>;
				dmas = <&hpdma 27 0x20 0x3012>,
				       <&hpdma 28 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 41>;
				status = "disabled";
			};

			i2c2: i2c@40130000 {
				compatible = "st,stm32mp25-i2c";
				reg = <0x40130000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupt-names = "event";
				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_I2C2>;
				resets = <&rcc I2C2_R>;
				dmas = <&hpdma 30 0x20 0x3012>,
				       <&hpdma 31 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 42>;
				status = "disabled";
			};

			i2c7: i2c@40180000 {
				compatible = "st,stm32mp25-i2c";
				reg = <0x40180000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupt-names = "event";
				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_I2C7>;
				resets = <&rcc I2C7_R>;
				dmas = <&hpdma 45 0x20 0x3012>,
				       <&hpdma 46 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 47>;
				status = "disabled";
			};

			usart6: serial@40220000 {
				compatible = "st,stm32h7-uart";
				reg = <0x40220000 0x400>;
				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_USART6>;
				dmas = <&hpdma 19 0x20 0x10012>,
				       <&hpdma 20 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 36>;
				status = "disabled";
			};

			i2s1: audio-controller@40230000 {
				compatible = "st,stm32mp25-i2s";
				reg = <0x40230000 0x400>;
				#sound-dai-cells = <0>;
				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_BUS_SPI1>, <&rcc CK_KER_SPI1>;
				clock-names = "pclk", "i2sclk";
				resets = <&rcc SPI1_R>;
				dmas = <&hpdma 49 0x43 0x12>,
				       <&hpdma 50 0x43 0x21>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 22>;
				status = "disabled";
			};

			spi1: spi@40230000 {
				compatible = "st,stm32mp25-spi";
				reg = <0x40230000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SPI1>;
				resets = <&rcc SPI1_R>;
				dmas = <&hpdma 49 0x20 0x3012>,
				       <&hpdma 50 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 22>;
				status = "disabled";
			};

			spi4: spi@40240000 {
				compatible = "st,stm32mp25-spi";
				reg = <0x40240000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SPI4>;
				resets = <&rcc SPI4_R>;
				dmas = <&hpdma 55 0x20 0x3012>,
				       <&hpdma 56 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 25>;
				status = "disabled";
			};

			spi5: spi@40280000 {
				compatible = "st,stm32mp25-spi";
				reg = <0x40280000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SPI5>;
				resets = <&rcc SPI5_R>;
				dmas = <&hpdma 57 0x20 0x3012>,
				       <&hpdma 58 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 26>;
				status = "disabled";
			};

			sai1: sai@40290000 {
				compatible = "st,stm32mp25-sai";
				reg = <0x40290000 0x4>, <0x4029a3f0 0x10>;
				ranges = <0 0x40290000 0x400>;
				#address-cells = <1>;
				#size-cells = <1>;
				clocks = <&rcc CK_BUS_SAI1>;
				clock-names = "pclk";
				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
				resets = <&rcc SAI1_R>;
				access-controllers = <&rifsc 49>;
				status = "disabled";

				sai1a: audio-controller@40290004 {
					compatible = "st,stm32-sai-sub-a";
					reg = <0x4 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI1>;
					clock-names = "sai_ck";
					dmas = <&hpdma 73 0x43 0x21>;
					status = "disabled";
				};

				sai1b: audio-controller@40290024 {
					compatible = "st,stm32-sai-sub-b";
					reg = <0x24 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI1>;
					clock-names = "sai_ck";
					dmas = <&hpdma 74 0x43 0x12>;
					status = "disabled";
				};
			};

			sai2: sai@402a0000 {
				compatible = "st,stm32mp25-sai";
				reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>;
				ranges = <0 0x402a0000 0x400>;
				#address-cells = <1>;
				#size-cells = <1>;
				clocks = <&rcc CK_BUS_SAI2>;
				clock-names = "pclk";
				interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
				resets = <&rcc SAI2_R>;
				access-controllers = <&rifsc 50>;
				status = "disabled";

				sai2a: audio-controller@402a0004 {
					compatible = "st,stm32-sai-sub-a";
					reg = <0x4 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI2>;
					clock-names = "sai_ck";
					dmas = <&hpdma 75 0x43 0x21>;
					status = "disabled";
				};

				sai2b: audio-controller@402a0024 {
					compatible = "st,stm32-sai-sub-b";
					reg = <0x24 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI2>;
					clock-names = "sai_ck";
					dmas = <&hpdma 76 0x43 0x12>;
					status = "disabled";
				};
			};

			sai3: sai@402b0000 {
				compatible = "st,stm32mp25-sai";
				reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>;
				ranges = <0 0x402b0000 0x400>;
				#address-cells = <1>;
				#size-cells = <1>;
				clocks = <&rcc CK_BUS_SAI3>;
				clock-names = "pclk";
				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
				resets = <&rcc SAI3_R>;
				access-controllers = <&rifsc 51>;
				status = "disabled";

				sai3a: audio-controller@402b0004 {
					compatible = "st,stm32-sai-sub-a";
					reg = <0x4 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI3>;
					clock-names = "sai_ck";
					dmas = <&hpdma 77 0x43 0x21>;
					status = "disabled";
				};

				sai3b: audio-controller@502b0024 {
					compatible = "st,stm32-sai-sub-b";
					reg = <0x24 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI3>;
					clock-names = "sai_ck";
					dmas = <&hpdma 78 0x43 0x12>;
					status = "disabled";
				};
			};

			usart1: serial@40330000 {
				compatible = "st,stm32h7-uart";
				reg = <0x40330000 0x400>;
				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_USART1>;
				dmas = <&hpdma 9 0x20 0x10012>,
				       <&hpdma 10 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 31>;
				status = "disabled";
			};

			sai4: sai@40340000 {
				compatible = "st,stm32mp25-sai";
				reg = <0x40340000 0x4>, <0x4034a3f0 0x10>;
				ranges = <0 0x40340000 0x400>;
				#address-cells = <1>;
				#size-cells = <1>;
				clocks = <&rcc CK_BUS_SAI4>;
				clock-names = "pclk";
				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
				resets = <&rcc SAI4_R>;
				access-controllers = <&rifsc 52>;
				status = "disabled";

				sai4a: audio-controller@40340004 {
					compatible = "st,stm32-sai-sub-a";
					reg = <0x4 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI4>;
					clock-names = "sai_ck";
					dmas = <&hpdma 79 0x63 0x21>;
					status = "disabled";
				};

				sai4b: audio-controller@40340024 {
					compatible = "st,stm32-sai-sub-b";
					reg = <0x24 0x20>;
					#sound-dai-cells = <0>;
					clocks = <&rcc CK_KER_SAI4>;
					clock-names = "sai_ck";
					dmas = <&hpdma 80 0x43 0x12>;
					status = "disabled";
				};
			};

			uart7: serial@40370000 {
				compatible = "st,stm32h7-uart";
				reg = <0x40370000 0x400>;
				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_UART7>;
				dmas = <&hpdma 21 0x20 0x10012>,
				       <&hpdma 22 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 37>;
				status = "disabled";
			};

			rng: rng@42020000 {
				compatible = "st,stm32mp25-rng";
				reg = <0x42020000 0x400>;
				clocks = <&clk_rcbsec>, <&rcc CK_BUS_RNG>;
				clock-names = "core", "bus";
				resets = <&rcc RNG_R>;
				access-controllers = <&rifsc 92>;
				status = "disabled";
			};

			spi8: spi@46020000 {
				compatible = "st,stm32mp25-spi";
				reg = <0x46020000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SPI8>;
				resets = <&rcc SPI8_R>;
				dmas = <&hpdma 171 0x20 0x3012>,
				       <&hpdma 172 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 29>;
				status = "disabled";
			};

			i2c8: i2c@46040000 {
				compatible = "st,stm32mp25-i2c";
				reg = <0x46040000 0x400>;
				#address-cells = <1>;
				#size-cells = <0>;
				interrupt-names = "event";
				interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_I2C8>;
				resets = <&rcc I2C8_R>;
				dmas = <&hpdma 168 0x20 0x3012>,
				       <&hpdma 169 0x20 0x3021>;
				dma-names = "rx", "tx";
				access-controllers = <&rifsc 48>;
				status = "disabled";
			};

			csi: csi@48020000 {
				compatible = "st,stm32mp25-csi";
				reg = <0x48020000 0x2000>;
				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
				resets = <&rcc CSI_R>;
				clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>,
					 <&rcc CK_KER_CSIPHY>;
				clock-names = "pclk", "txesc", "csi2phy";
				access-controllers = <&rifsc 86>;
				status = "disabled";
			};

			dcmipp: dcmipp@48030000 {
				compatible = "st,stm32mp25-dcmipp";
				reg = <0x48030000 0x1000>;
				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
				resets = <&rcc DCMIPP_R>;
				clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
				clock-names = "kclk", "mclk";
				access-controllers = <&rifsc 87>;
				status = "disabled";
			};

			sdmmc1: mmc@48220000 {
				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
				reg = <0x48220000 0x400>, <0x44230400 0x8>;
				arm,primecell-periphid = <0x00353180>;
				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&rcc CK_KER_SDMMC1 >;
				clock-names = "apb_pclk";
				resets = <&rcc SDMMC1_R>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
				max-frequency = <120000000>;
				access-controllers = <&rifsc 76>;
				status = "disabled";
			};

			ethernet1: ethernet@482c0000 {
				compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20";
				reg = <0x482c0000 0x4000>;
				reg-names = "stmmaceth";
				interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names = "macirq";
				clock-names = "stmmaceth",
					      "mac-clk-tx",
					      "mac-clk-rx",
					      "ptp_ref",
					      "ethstp",
					      "eth-ck";
				clocks = <&rcc CK_ETH1_MAC>,
					 <&rcc CK_ETH1_TX>,
					 <&rcc CK_ETH1_RX>,
					 <&rcc CK_KER_ETH1PTP>,
					 <&rcc CK_ETH1_STP>,
					 <&rcc CK_KER_ETH1>;
				snps,axi-config = <&stmmac_axi_config_1>;
				snps,mixed-burst;
				snps,mtl-rx-config = <&mtl_rx_setup_1>;
				snps,mtl-tx-config = <&mtl_tx_setup_1>;
				snps,pbl = <2>;
				snps,tso;
				st,syscon = <&syscfg 0x3000>;
				access-controllers = <&rifsc 60>;
				status = "disabled";

				mtl_rx_setup_1: rx-queues-config {
					snps,rx-queues-to-use = <2>;
					queue0 {};
					queue1 {};
				};

				mtl_tx_setup_1: tx-queues-config {
					snps,tx-queues-to-use = <4>;
					queue0 {};
					queue1 {};
					queue2 {};
					queue3 {};
				};

				stmmac_axi_config_1: stmmac-axi-config {
					snps,blen = <0 0 0 0 16 8 4>;
					snps,rd_osr_lmt = <0x7>;
					snps,wr_osr_lmt = <0x7>;
				};
			};
		};

		bsec: efuse@44000000 {
			compatible = "st,stm32mp25-bsec";
			reg = <0x44000000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;

			part_number_otp@24 {
				reg = <0x24 0x4>;
			};

			package_otp@1e8 {
				reg = <0x1e8 0x1>;
				bits = <0 3>;
			};
		};

		rcc: clock-controller@44200000 {
			compatible = "st,stm32mp25-rcc";
			reg = <0x44200000 0x10000>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			clocks = <&scmi_clk CK_SCMI_HSE>,
				<&scmi_clk CK_SCMI_HSI>,
				<&scmi_clk CK_SCMI_MSI>,
				<&scmi_clk CK_SCMI_LSE>,
				<&scmi_clk CK_SCMI_LSI>,
				<&scmi_clk CK_SCMI_HSE_DIV2>,
				<&scmi_clk CK_SCMI_ICN_HS_MCU>,
				<&scmi_clk CK_SCMI_ICN_LS_MCU>,
				<&scmi_clk CK_SCMI_ICN_SDMMC>,
				<&scmi_clk CK_SCMI_ICN_DDR>,
				<&scmi_clk CK_SCMI_ICN_DISPLAY>,
				<&scmi_clk CK_SCMI_ICN_HSL>,
				<&scmi_clk CK_SCMI_ICN_NIC>,
				<&scmi_clk CK_SCMI_ICN_VID>,
				<&scmi_clk CK_SCMI_FLEXGEN_07>,
				<&scmi_clk CK_SCMI_FLEXGEN_08>,
				<&scmi_clk CK_SCMI_FLEXGEN_09>,
				<&scmi_clk CK_SCMI_FLEXGEN_10>,
				<&scmi_clk CK_SCMI_FLEXGEN_11>,
				<&scmi_clk CK_SCMI_FLEXGEN_12>,
				<&scmi_clk CK_SCMI_FLEXGEN_13>,
				<&scmi_clk CK_SCMI_FLEXGEN_14>,
				<&scmi_clk CK_SCMI_FLEXGEN_15>,
				<&scmi_clk CK_SCMI_FLEXGEN_16>,
				<&scmi_clk CK_SCMI_FLEXGEN_17>,
				<&scmi_clk CK_SCMI_FLEXGEN_18>,
				<&scmi_clk CK_SCMI_FLEXGEN_19>,
				<&scmi_clk CK_SCMI_FLEXGEN_20>,
				<&scmi_clk CK_SCMI_FLEXGEN_21>,
				<&scmi_clk CK_SCMI_FLEXGEN_22>,
				<&scmi_clk CK_SCMI_FLEXGEN_23>,
				<&scmi_clk CK_SCMI_FLEXGEN_24>,
				<&scmi_clk CK_SCMI_FLEXGEN_25>,
				<&scmi_clk CK_SCMI_FLEXGEN_26>,
				<&scmi_clk CK_SCMI_FLEXGEN_27>,
				<&scmi_clk CK_SCMI_FLEXGEN_28>,
				<&scmi_clk CK_SCMI_FLEXGEN_29>,
				<&scmi_clk CK_SCMI_FLEXGEN_30>,
				<&scmi_clk CK_SCMI_FLEXGEN_31>,
				<&scmi_clk CK_SCMI_FLEXGEN_32>,
				<&scmi_clk CK_SCMI_FLEXGEN_33>,
				<&scmi_clk CK_SCMI_FLEXGEN_34>,
				<&scmi_clk CK_SCMI_FLEXGEN_35>,
				<&scmi_clk CK_SCMI_FLEXGEN_36>,
				<&scmi_clk CK_SCMI_FLEXGEN_37>,
				<&scmi_clk CK_SCMI_FLEXGEN_38>,
				<&scmi_clk CK_SCMI_FLEXGEN_39>,
				<&scmi_clk CK_SCMI_FLEXGEN_40>,
				<&scmi_clk CK_SCMI_FLEXGEN_41>,
				<&scmi_clk CK_SCMI_FLEXGEN_42>,
				<&scmi_clk CK_SCMI_FLEXGEN_43>,
				<&scmi_clk CK_SCMI_FLEXGEN_44>,
				<&scmi_clk CK_SCMI_FLEXGEN_45>,
				<&scmi_clk CK_SCMI_FLEXGEN_46>,
				<&scmi_clk CK_SCMI_FLEXGEN_47>,
				<&scmi_clk CK_SCMI_FLEXGEN_48>,
				<&scmi_clk CK_SCMI_FLEXGEN_49>,
				<&scmi_clk CK_SCMI_FLEXGEN_50>,
				<&scmi_clk CK_SCMI_FLEXGEN_51>,
				<&scmi_clk CK_SCMI_FLEXGEN_52>,
				<&scmi_clk CK_SCMI_FLEXGEN_53>,
				<&scmi_clk CK_SCMI_FLEXGEN_54>,
				<&scmi_clk CK_SCMI_FLEXGEN_55>,
				<&scmi_clk CK_SCMI_FLEXGEN_56>,
				<&scmi_clk CK_SCMI_FLEXGEN_57>,
				<&scmi_clk CK_SCMI_FLEXGEN_58>,
				<&scmi_clk CK_SCMI_FLEXGEN_59>,
				<&scmi_clk CK_SCMI_FLEXGEN_60>,
				<&scmi_clk CK_SCMI_FLEXGEN_61>,
				<&scmi_clk CK_SCMI_FLEXGEN_62>,
				<&scmi_clk CK_SCMI_FLEXGEN_63>,
				<&scmi_clk CK_SCMI_ICN_APB1>,
				<&scmi_clk CK_SCMI_ICN_APB2>,
				<&scmi_clk CK_SCMI_ICN_APB3>,
				<&scmi_clk CK_SCMI_ICN_APB4>,
				<&scmi_clk CK_SCMI_ICN_APBDBG>,
				<&scmi_clk CK_SCMI_TIMG1>,
				<&scmi_clk CK_SCMI_TIMG2>,
				<&scmi_clk CK_SCMI_PLL3>,
				<&clk_dsi_txbyte>;
				access-controllers = <&rifsc 156>;
		};

		exti1: interrupt-controller@44220000 {
			compatible = "st,stm32mp1-exti", "syscon";
			reg = <0x44220000 0x400>;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts-extended =
				<&intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
				<&intc GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
				<&intc GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
				<0>,						/* EXTI_20 */
				<&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
				<&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_40 */
				<&intc GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,
				<&intc GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
				<0>,						/* EXTI_60 */
				<&intc GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_70 */
				<0>,
				<&intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
				<0>,						/* EXTI_80 */
				<0>,
				<0>,
				<&intc GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
		};

		syscfg: syscon@44230000 {
			compatible = "st,stm32mp23-syscfg", "syscon";
			reg = <0x44230000 0x10000>;
		};

		pinctrl: pinctrl@44240000 {
			compatible = "st,stm32mp257-pinctrl";
			ranges = <0 0x44240000 0xa0400>;
			#address-cells = <1>;
			#size-cells = <1>;
			interrupt-parent = <&exti1>;
			st,syscfg = <&exti1 0x60 0xff>;
			pins-are-numbered;

			gpioa: gpio@44240000 {
				reg = <0x0 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOA>;
				st,bank-name = "GPIOA";
				status = "disabled";
			};

			gpiob: gpio@44250000 {
				reg = <0x10000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOB>;
				st,bank-name = "GPIOB";
				status = "disabled";
			};

			gpioc: gpio@44260000 {
				reg = <0x20000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOC>;
				st,bank-name = "GPIOC";
				status = "disabled";
			};

			gpiod: gpio@44270000 {
				reg = <0x30000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOD>;
				st,bank-name = "GPIOD";
				status = "disabled";
			};

			gpioe: gpio@44280000 {
				reg = <0x40000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOE>;
				st,bank-name = "GPIOE";
				status = "disabled";
			};

			gpiof: gpio@44290000 {
				reg = <0x50000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOF>;
				st,bank-name = "GPIOF";
				status = "disabled";
			};

			gpiog: gpio@442a0000 {
				reg = <0x60000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOG>;
				st,bank-name = "GPIOG";
				status = "disabled";
			};

			gpioh: gpio@442b0000 {
				reg = <0x70000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOH>;
				st,bank-name = "GPIOH";
				status = "disabled";
			};

			gpioi: gpio@442c0000 {
				reg = <0x80000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOI>;
				st,bank-name = "GPIOI";
				status = "disabled";
			};

			gpioj: gpio@442d0000 {
				reg = <0x90000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOJ>;
				st,bank-name = "GPIOJ";
				status = "disabled";
			};

			gpiok: gpio@442e0000 {
				reg = <0xa0000 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOK>;
				st,bank-name = "GPIOK";
				status = "disabled";
			};
		};

		rtc: rtc@46000000 {
			compatible = "st,stm32mp25-rtc";
			reg = <0x46000000 0x400>;
			clocks = <&scmi_clk CK_SCMI_RTC>,
				 <&scmi_clk CK_SCMI_RTCCK>;
			clock-names = "pclk", "rtc_ck";
			interrupts-extended = <&exti2 17 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		pinctrl_z: pinctrl@46200000 {
			compatible = "st,stm32mp257-z-pinctrl";
			ranges = <0 0x46200000 0x400>;
			#address-cells = <1>;
			#size-cells = <1>;
			interrupt-parent = <&exti1>;
			st,syscfg = <&exti1 0x60 0xff>;
			pins-are-numbered;

			gpioz: gpio@46200000 {
				reg = <0 0x400>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				clocks = <&scmi_clk CK_SCMI_GPIOZ>;
				st,bank-name = "GPIOZ";
				st,bank-ioport = <11>;
				status = "disabled";
			};

		};

		exti2: interrupt-controller@46230000 {
			compatible = "st,stm32mp1-exti", "syscon";
			reg = <0x46230000 0x400>;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts-extended =
				<&intc GIC_SPI 17  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
				<&intc GIC_SPI 18  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 19  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 20  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 21  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 22  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 23  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 24  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 25  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 26  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 27  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
				<&intc GIC_SPI 28  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 29  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 30  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 31  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 32  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 12  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 13  IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<0>,						/* EXTI_20 */
				<&intc GIC_SPI 14  IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 15  IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<&intc GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
				<&intc GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<&intc GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_40 */
				<0>,
				<0>,
				<&intc GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 11  IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<&intc GIC_SPI 5   IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 4   IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 2   IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,
				<0>,						/* EXTI_60 */
				<&intc GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<&intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
				<&intc GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
				<0>,
				<0>,
				<&intc GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;	/* EXTI_70 */
		};

		intc: interrupt-controller@4ac10000 {
			compatible = "arm,gic-400";
			reg = <0x4ac10000 0x1000>,
			      <0x4ac20000 0x20000>,
			      <0x4ac40000 0x20000>,
			      <0x4ac60000 0x20000>;
			#interrupt-cells = <3>;
			interrupt-controller;
		};
	};
};