xref: /freebsd/sys/contrib/device-tree/src/arm64/socionext/uniphier-ld11.dtsi (revision 43a5ec4eb41567cc92586503212743d89686d78f)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier LD11 SoC
4//
5// Copyright (C) 2016 Socionext Inc.
6//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/gpio/uniphier-gpio.h>
10
11/ {
12	compatible = "socionext,uniphier-ld11";
13	#address-cells = <2>;
14	#size-cells = <2>;
15	interrupt-parent = <&gic>;
16
17	cpus {
18		#address-cells = <2>;
19		#size-cells = <0>;
20
21		cpu-map {
22			cluster0 {
23				core0 {
24					cpu = <&cpu0>;
25				};
26				core1 {
27					cpu = <&cpu1>;
28				};
29			};
30		};
31
32		cpu0: cpu@0 {
33			device_type = "cpu";
34			compatible = "arm,cortex-a53";
35			reg = <0 0x000>;
36			clocks = <&sys_clk 33>;
37			enable-method = "psci";
38			operating-points-v2 = <&cluster0_opp>;
39		};
40
41		cpu1: cpu@1 {
42			device_type = "cpu";
43			compatible = "arm,cortex-a53";
44			reg = <0 0x001>;
45			clocks = <&sys_clk 33>;
46			enable-method = "psci";
47			operating-points-v2 = <&cluster0_opp>;
48		};
49	};
50
51	cluster0_opp: opp-table {
52		compatible = "operating-points-v2";
53		opp-shared;
54
55		opp-245000000 {
56			opp-hz = /bits/ 64 <245000000>;
57			clock-latency-ns = <300>;
58		};
59		opp-250000000 {
60			opp-hz = /bits/ 64 <250000000>;
61			clock-latency-ns = <300>;
62		};
63		opp-490000000 {
64			opp-hz = /bits/ 64 <490000000>;
65			clock-latency-ns = <300>;
66		};
67		opp-500000000 {
68			opp-hz = /bits/ 64 <500000000>;
69			clock-latency-ns = <300>;
70		};
71		opp-653334000 {
72			opp-hz = /bits/ 64 <653334000>;
73			clock-latency-ns = <300>;
74		};
75		opp-666667000 {
76			opp-hz = /bits/ 64 <666667000>;
77			clock-latency-ns = <300>;
78		};
79		opp-980000000 {
80			opp-hz = /bits/ 64 <980000000>;
81			clock-latency-ns = <300>;
82		};
83	};
84
85	psci {
86		compatible = "arm,psci-1.0";
87		method = "smc";
88	};
89
90	clocks {
91		refclk: ref {
92			compatible = "fixed-clock";
93			#clock-cells = <0>;
94			clock-frequency = <25000000>;
95		};
96	};
97
98	emmc_pwrseq: emmc-pwrseq {
99		compatible = "mmc-pwrseq-emmc";
100		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
101	};
102
103	timer {
104		compatible = "arm,armv8-timer";
105		interrupts = <1 13 4>,
106			     <1 14 4>,
107			     <1 11 4>,
108			     <1 10 4>;
109	};
110
111	reserved-memory {
112		#address-cells = <2>;
113		#size-cells = <2>;
114		ranges;
115
116		secure-memory@81000000 {
117			reg = <0x0 0x81000000 0x0 0x01000000>;
118			no-map;
119		};
120	};
121
122	soc@0 {
123		compatible = "simple-bus";
124		#address-cells = <1>;
125		#size-cells = <1>;
126		ranges = <0 0 0 0xffffffff>;
127
128		spi0: spi@54006000 {
129			compatible = "socionext,uniphier-scssi";
130			status = "disabled";
131			reg = <0x54006000 0x100>;
132			#address-cells = <1>;
133			#size-cells = <0>;
134			interrupts = <0 39 4>;
135			pinctrl-names = "default";
136			pinctrl-0 = <&pinctrl_spi0>;
137			clocks = <&peri_clk 11>;
138			resets = <&peri_rst 11>;
139		};
140
141		spi1: spi@54006100 {
142			compatible = "socionext,uniphier-scssi";
143			status = "disabled";
144			reg = <0x54006100 0x100>;
145			#address-cells = <1>;
146			#size-cells = <0>;
147			interrupts = <0 216 4>;
148			pinctrl-names = "default";
149			pinctrl-0 = <&pinctrl_spi1>;
150			clocks = <&peri_clk 12>;
151			resets = <&peri_rst 12>;
152		};
153
154		serial0: serial@54006800 {
155			compatible = "socionext,uniphier-uart";
156			status = "disabled";
157			reg = <0x54006800 0x40>;
158			interrupts = <0 33 4>;
159			pinctrl-names = "default";
160			pinctrl-0 = <&pinctrl_uart0>;
161			clocks = <&peri_clk 0>;
162			resets = <&peri_rst 0>;
163		};
164
165		serial1: serial@54006900 {
166			compatible = "socionext,uniphier-uart";
167			status = "disabled";
168			reg = <0x54006900 0x40>;
169			interrupts = <0 35 4>;
170			pinctrl-names = "default";
171			pinctrl-0 = <&pinctrl_uart1>;
172			clocks = <&peri_clk 1>;
173			resets = <&peri_rst 1>;
174		};
175
176		serial2: serial@54006a00 {
177			compatible = "socionext,uniphier-uart";
178			status = "disabled";
179			reg = <0x54006a00 0x40>;
180			interrupts = <0 37 4>;
181			pinctrl-names = "default";
182			pinctrl-0 = <&pinctrl_uart2>;
183			clocks = <&peri_clk 2>;
184			resets = <&peri_rst 2>;
185		};
186
187		serial3: serial@54006b00 {
188			compatible = "socionext,uniphier-uart";
189			status = "disabled";
190			reg = <0x54006b00 0x40>;
191			interrupts = <0 177 4>;
192			pinctrl-names = "default";
193			pinctrl-0 = <&pinctrl_uart3>;
194			clocks = <&peri_clk 3>;
195			resets = <&peri_rst 3>;
196		};
197
198		gpio: gpio@55000000 {
199			compatible = "socionext,uniphier-gpio";
200			reg = <0x55000000 0x200>;
201			interrupt-parent = <&aidet>;
202			interrupt-controller;
203			#interrupt-cells = <2>;
204			gpio-controller;
205			#gpio-cells = <2>;
206			gpio-ranges = <&pinctrl 0 0 0>,
207				      <&pinctrl 43 0 0>,
208				      <&pinctrl 51 0 0>,
209				      <&pinctrl 96 0 0>,
210				      <&pinctrl 160 0 0>,
211				      <&pinctrl 184 0 0>;
212			gpio-ranges-group-names = "gpio_range0",
213						  "gpio_range1",
214						  "gpio_range2",
215						  "gpio_range3",
216						  "gpio_range4",
217						  "gpio_range5";
218			ngpios = <200>;
219			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
220						     <21 217 3>;
221		};
222
223		audio@56000000 {
224			compatible = "socionext,uniphier-ld11-aio";
225			reg = <0x56000000 0x80000>;
226			interrupts = <0 144 4>;
227			pinctrl-names = "default";
228			pinctrl-0 = <&pinctrl_aout1>,
229				    <&pinctrl_aoutiec1>;
230			clock-names = "aio";
231			clocks = <&sys_clk 40>;
232			reset-names = "aio";
233			resets = <&sys_rst 40>;
234			#sound-dai-cells = <1>;
235			socionext,syscon = <&soc_glue>;
236
237			i2s_port0: port@0 {
238				i2s_hdmi: endpoint {
239				};
240			};
241
242			i2s_port1: port@1 {
243				i2s_pcmin2: endpoint {
244				};
245			};
246
247			i2s_port2: port@2 {
248				i2s_line: endpoint {
249					dai-format = "i2s";
250					remote-endpoint = <&evea_line>;
251				};
252			};
253
254			i2s_port3: port@3 {
255				i2s_hpcmout1: endpoint {
256				};
257			};
258
259			i2s_port4: port@4 {
260				i2s_hp: endpoint {
261					dai-format = "i2s";
262					remote-endpoint = <&evea_hp>;
263				};
264			};
265
266			spdif_port0: port@5 {
267				spdif_hiecout1: endpoint {
268				};
269			};
270
271			src_port0: port@6 {
272				i2s_epcmout2: endpoint {
273				};
274			};
275
276			src_port1: port@7 {
277				i2s_epcmout3: endpoint {
278				};
279			};
280
281			comp_spdif_port0: port@8 {
282				comp_spdif_hiecout1: endpoint {
283				};
284			};
285		};
286
287		codec@57900000 {
288			compatible = "socionext,uniphier-evea";
289			reg = <0x57900000 0x1000>;
290			clock-names = "evea", "exiv";
291			clocks = <&sys_clk 41>, <&sys_clk 42>;
292			reset-names = "evea", "exiv", "adamv";
293			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
294			#sound-dai-cells = <1>;
295
296			port@0 {
297				evea_line: endpoint {
298					remote-endpoint = <&i2s_line>;
299				};
300			};
301
302			port@1 {
303				evea_hp: endpoint {
304					remote-endpoint = <&i2s_hp>;
305				};
306			};
307		};
308
309		adamv@57920000 {
310			compatible = "socionext,uniphier-ld11-adamv",
311				     "simple-mfd", "syscon";
312			reg = <0x57920000 0x1000>;
313
314			adamv_rst: reset {
315				compatible = "socionext,uniphier-ld11-adamv-reset";
316				#reset-cells = <1>;
317			};
318		};
319
320		i2c0: i2c@58780000 {
321			compatible = "socionext,uniphier-fi2c";
322			status = "disabled";
323			reg = <0x58780000 0x80>;
324			#address-cells = <1>;
325			#size-cells = <0>;
326			interrupts = <0 41 4>;
327			pinctrl-names = "default";
328			pinctrl-0 = <&pinctrl_i2c0>;
329			clocks = <&peri_clk 4>;
330			resets = <&peri_rst 4>;
331			clock-frequency = <100000>;
332		};
333
334		i2c1: i2c@58781000 {
335			compatible = "socionext,uniphier-fi2c";
336			status = "disabled";
337			reg = <0x58781000 0x80>;
338			#address-cells = <1>;
339			#size-cells = <0>;
340			interrupts = <0 42 4>;
341			pinctrl-names = "default";
342			pinctrl-0 = <&pinctrl_i2c1>;
343			clocks = <&peri_clk 5>;
344			resets = <&peri_rst 5>;
345			clock-frequency = <100000>;
346		};
347
348		i2c2: i2c@58782000 {
349			compatible = "socionext,uniphier-fi2c";
350			reg = <0x58782000 0x80>;
351			#address-cells = <1>;
352			#size-cells = <0>;
353			interrupts = <0 43 4>;
354			clocks = <&peri_clk 6>;
355			resets = <&peri_rst 6>;
356			clock-frequency = <400000>;
357		};
358
359		i2c3: i2c@58783000 {
360			compatible = "socionext,uniphier-fi2c";
361			status = "disabled";
362			reg = <0x58783000 0x80>;
363			#address-cells = <1>;
364			#size-cells = <0>;
365			interrupts = <0 44 4>;
366			pinctrl-names = "default";
367			pinctrl-0 = <&pinctrl_i2c3>;
368			clocks = <&peri_clk 7>;
369			resets = <&peri_rst 7>;
370			clock-frequency = <100000>;
371		};
372
373		i2c4: i2c@58784000 {
374			compatible = "socionext,uniphier-fi2c";
375			status = "disabled";
376			reg = <0x58784000 0x80>;
377			#address-cells = <1>;
378			#size-cells = <0>;
379			interrupts = <0 45 4>;
380			pinctrl-names = "default";
381			pinctrl-0 = <&pinctrl_i2c4>;
382			clocks = <&peri_clk 8>;
383			resets = <&peri_rst 8>;
384			clock-frequency = <100000>;
385		};
386
387		i2c5: i2c@58785000 {
388			compatible = "socionext,uniphier-fi2c";
389			reg = <0x58785000 0x80>;
390			#address-cells = <1>;
391			#size-cells = <0>;
392			interrupts = <0 25 4>;
393			clocks = <&peri_clk 9>;
394			resets = <&peri_rst 9>;
395			clock-frequency = <400000>;
396		};
397
398		system_bus: system-bus@58c00000 {
399			compatible = "socionext,uniphier-system-bus";
400			status = "disabled";
401			reg = <0x58c00000 0x400>;
402			#address-cells = <2>;
403			#size-cells = <1>;
404			pinctrl-names = "default";
405			pinctrl-0 = <&pinctrl_system_bus>;
406		};
407
408		smpctrl@59801000 {
409			compatible = "socionext,uniphier-smpctrl";
410			reg = <0x59801000 0x400>;
411		};
412
413		sdctrl@59810000 {
414			compatible = "socionext,uniphier-ld11-sdctrl",
415				     "simple-mfd", "syscon";
416			reg = <0x59810000 0x400>;
417
418			sd_rst: reset {
419				compatible = "socionext,uniphier-ld11-sd-reset";
420				#reset-cells = <1>;
421			};
422		};
423
424		perictrl@59820000 {
425			compatible = "socionext,uniphier-ld11-perictrl",
426				     "simple-mfd", "syscon";
427			reg = <0x59820000 0x200>;
428
429			peri_clk: clock {
430				compatible = "socionext,uniphier-ld11-peri-clock";
431				#clock-cells = <1>;
432			};
433
434			peri_rst: reset {
435				compatible = "socionext,uniphier-ld11-peri-reset";
436				#reset-cells = <1>;
437			};
438		};
439
440		emmc: mmc@5a000000 {
441			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
442			reg = <0x5a000000 0x400>;
443			interrupts = <0 78 4>;
444			pinctrl-names = "default";
445			pinctrl-0 = <&pinctrl_emmc>;
446			clocks = <&sys_clk 4>;
447			resets = <&sys_rst 4>;
448			bus-width = <8>;
449			mmc-ddr-1_8v;
450			mmc-hs200-1_8v;
451			mmc-pwrseq = <&emmc_pwrseq>;
452			cdns,phy-input-delay-legacy = <9>;
453			cdns,phy-input-delay-mmc-highspeed = <2>;
454			cdns,phy-input-delay-mmc-ddr = <3>;
455			cdns,phy-dll-delay-sdclk = <21>;
456			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
457		};
458
459		usb0: usb@5a800100 {
460			compatible = "socionext,uniphier-ehci", "generic-ehci";
461			status = "disabled";
462			reg = <0x5a800100 0x100>;
463			interrupts = <0 243 4>;
464			pinctrl-names = "default";
465			pinctrl-0 = <&pinctrl_usb0>;
466			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
467				 <&mio_clk 12>;
468			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
469				 <&mio_rst 12>;
470			phy-names = "usb";
471			phys = <&usb_phy0>;
472			has-transaction-translator;
473		};
474
475		usb1: usb@5a810100 {
476			compatible = "socionext,uniphier-ehci", "generic-ehci";
477			status = "disabled";
478			reg = <0x5a810100 0x100>;
479			interrupts = <0 244 4>;
480			pinctrl-names = "default";
481			pinctrl-0 = <&pinctrl_usb1>;
482			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
483				 <&mio_clk 13>;
484			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
485				 <&mio_rst 13>;
486			phy-names = "usb";
487			phys = <&usb_phy1>;
488			has-transaction-translator;
489		};
490
491		usb2: usb@5a820100 {
492			compatible = "socionext,uniphier-ehci", "generic-ehci";
493			status = "disabled";
494			reg = <0x5a820100 0x100>;
495			interrupts = <0 245 4>;
496			pinctrl-names = "default";
497			pinctrl-0 = <&pinctrl_usb2>;
498			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
499				 <&mio_clk 14>;
500			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
501				 <&mio_rst 14>;
502			phy-names = "usb";
503			phys = <&usb_phy2>;
504			has-transaction-translator;
505		};
506
507		mioctrl@5b3e0000 {
508			compatible = "socionext,uniphier-ld11-mioctrl",
509				     "simple-mfd", "syscon";
510			reg = <0x5b3e0000 0x800>;
511
512			mio_clk: clock {
513				compatible = "socionext,uniphier-ld11-mio-clock";
514				#clock-cells = <1>;
515			};
516
517			mio_rst: reset {
518				compatible = "socionext,uniphier-ld11-mio-reset";
519				#reset-cells = <1>;
520				resets = <&sys_rst 7>;
521			};
522		};
523
524		soc_glue: soc-glue@5f800000 {
525			compatible = "socionext,uniphier-ld11-soc-glue",
526				     "simple-mfd", "syscon";
527			reg = <0x5f800000 0x2000>;
528
529			pinctrl: pinctrl {
530				compatible = "socionext,uniphier-ld11-pinctrl";
531			};
532
533			usb-phy {
534				compatible = "socionext,uniphier-ld11-usb2-phy";
535				#address-cells = <1>;
536				#size-cells = <0>;
537
538				usb_phy0: phy@0 {
539					reg = <0>;
540					#phy-cells = <0>;
541				};
542
543				usb_phy1: phy@1 {
544					reg = <1>;
545					#phy-cells = <0>;
546				};
547
548				usb_phy2: phy@2 {
549					reg = <2>;
550					#phy-cells = <0>;
551				};
552			};
553		};
554
555		soc-glue@5f900000 {
556			compatible = "socionext,uniphier-ld11-soc-glue-debug",
557				     "simple-mfd";
558			#address-cells = <1>;
559			#size-cells = <1>;
560			ranges = <0 0x5f900000 0x2000>;
561
562			efuse@100 {
563				compatible = "socionext,uniphier-efuse";
564				reg = <0x100 0x28>;
565			};
566
567			efuse@200 {
568				compatible = "socionext,uniphier-efuse";
569				reg = <0x200 0x68>;
570			};
571		};
572
573		xdmac: dma-controller@5fc10000 {
574			compatible = "socionext,uniphier-xdmac";
575			reg = <0x5fc10000 0x5300>;
576			interrupts = <0 188 4>;
577			dma-channels = <16>;
578			#dma-cells = <2>;
579		};
580
581		aidet: interrupt-controller@5fc20000 {
582			compatible = "socionext,uniphier-ld11-aidet";
583			reg = <0x5fc20000 0x200>;
584			interrupt-controller;
585			#interrupt-cells = <2>;
586		};
587
588		gic: interrupt-controller@5fe00000 {
589			compatible = "arm,gic-v3";
590			reg = <0x5fe00000 0x10000>,	/* GICD */
591			      <0x5fe40000 0x80000>;	/* GICR */
592			interrupt-controller;
593			#interrupt-cells = <3>;
594			interrupts = <1 9 4>;
595		};
596
597		sysctrl@61840000 {
598			compatible = "socionext,uniphier-ld11-sysctrl",
599				     "simple-mfd", "syscon";
600			reg = <0x61840000 0x10000>;
601
602			sys_clk: clock {
603				compatible = "socionext,uniphier-ld11-clock";
604				#clock-cells = <1>;
605			};
606
607			sys_rst: reset {
608				compatible = "socionext,uniphier-ld11-reset";
609				#reset-cells = <1>;
610			};
611
612			watchdog {
613				compatible = "socionext,uniphier-wdt";
614			};
615		};
616
617		eth: ethernet@65000000 {
618			compatible = "socionext,uniphier-ld11-ave4";
619			status = "disabled";
620			reg = <0x65000000 0x8500>;
621			interrupts = <0 66 4>;
622			clock-names = "ether";
623			clocks = <&sys_clk 6>;
624			reset-names = "ether";
625			resets = <&sys_rst 6>;
626			phy-mode = "internal";
627			local-mac-address = [00 00 00 00 00 00];
628			socionext,syscon-phy-mode = <&soc_glue 0>;
629
630			mdio: mdio {
631				#address-cells = <1>;
632				#size-cells = <0>;
633			};
634		};
635
636		nand: nand-controller@68000000 {
637			compatible = "socionext,uniphier-denali-nand-v5b";
638			status = "disabled";
639			reg-names = "nand_data", "denali_reg";
640			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
641			#address-cells = <1>;
642			#size-cells = <0>;
643			interrupts = <0 65 4>;
644			pinctrl-names = "default";
645			pinctrl-0 = <&pinctrl_nand>;
646			clock-names = "nand", "nand_x", "ecc";
647			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
648			reset-names = "nand", "reg";
649			resets = <&sys_rst 2>, <&sys_rst 2>;
650		};
651	};
652};
653
654#include "uniphier-pinctrl.dtsi"
655
656&pinctrl_aoutiec1 {
657	drive-strength = <4>;	/* default: 4mA */
658
659	ao1arc {
660		pins = "AO1ARC";
661		drive-strength = <8>;	/* 8mA */
662	};
663};
664