1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3/dts-v1/; 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/pinctrl/rockchip.h> 7#include <dt-bindings/soc/rockchip,vop2.h> 8#include "rk3566.dtsi" 9 10/ { 11 model = "Pine64 RK3566 Quartz64-A Board"; 12 compatible = "pine64,quartz64-a", "rockchip,rk3566"; 13 14 aliases { 15 ethernet0 = &gmac1; 16 mmc0 = &sdmmc0; 17 mmc1 = &sdhci; 18 }; 19 20 chosen: chosen { 21 stdout-path = "serial2:1500000n8"; 22 }; 23 24 gmac1_clkin: external-gmac1-clock { 25 compatible = "fixed-clock"; 26 clock-frequency = <125000000>; 27 clock-output-names = "gmac1_clkin"; 28 #clock-cells = <0>; 29 }; 30 31 fan: gpio_fan { 32 compatible = "gpio-fan"; 33 gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; 34 gpio-fan,speed-map = 35 < 0 0>, 36 <4500 1>; 37 pinctrl-names = "default"; 38 pinctrl-0 = <&fan_en_h>; 39 #cooling-cells = <2>; 40 }; 41 42 hdmi-con { 43 compatible = "hdmi-connector"; 44 type = "a"; 45 46 port { 47 hdmi_con_in: endpoint { 48 remote-endpoint = <&hdmi_out_con>; 49 }; 50 }; 51 }; 52 53 leds { 54 compatible = "gpio-leds"; 55 56 led-work { 57 label = "work-led"; 58 default-state = "off"; 59 gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; 60 pinctrl-names = "default"; 61 pinctrl-0 = <&work_led_enable_h>; 62 retain-state-suspended; 63 }; 64 65 led-diy { 66 label = "diy-led"; 67 default-state = "on"; 68 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; 69 linux,default-trigger = "heartbeat"; 70 pinctrl-names = "default"; 71 pinctrl-0 = <&diy_led_enable_h>; 72 retain-state-suspended; 73 }; 74 }; 75 76 rk817-sound { 77 compatible = "simple-audio-card"; 78 simple-audio-card,format = "i2s"; 79 simple-audio-card,name = "Analog RK817"; 80 simple-audio-card,mclk-fs = <256>; 81 82 simple-audio-card,cpu { 83 sound-dai = <&i2s1_8ch>; 84 }; 85 86 simple-audio-card,codec { 87 sound-dai = <&rk817>; 88 }; 89 }; 90 91 sdio_pwrseq: sdio-pwrseq { 92 compatible = "mmc-pwrseq-simple"; 93 clocks = <&rk817 1>; 94 clock-names = "ext_clock"; 95 pinctrl-names = "default"; 96 pinctrl-0 = <&wifi_enable_h>; 97 post-power-on-delay-ms = <100>; 98 power-off-delay-us = <5000000>; 99 reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; 100 }; 101 102 spdif_dit: spdif-dit { 103 compatible = "linux,spdif-dit"; 104 #sound-dai-cells = <0>; 105 }; 106 107 spdif_sound: spdif-sound { 108 compatible = "simple-audio-card"; 109 simple-audio-card,name = "SPDIF"; 110 111 simple-audio-card,cpu { 112 sound-dai = <&spdif>; 113 }; 114 115 simple-audio-card,codec { 116 sound-dai = <&spdif_dit>; 117 }; 118 }; 119 120 vcc12v_dcin: vcc12v_dcin { 121 compatible = "regulator-fixed"; 122 regulator-name = "vcc12v_dcin"; 123 regulator-always-on; 124 regulator-boot-on; 125 regulator-min-microvolt = <12000000>; 126 regulator-max-microvolt = <12000000>; 127 }; 128 129 /* vbus feeds the rk817 usb input. 130 * With no battery attached, also feeds vcc_bat+ 131 * via ON/OFF_BAT jumper 132 */ 133 vbus: vbus { 134 compatible = "regulator-fixed"; 135 regulator-name = "vbus"; 136 regulator-always-on; 137 regulator-boot-on; 138 regulator-min-microvolt = <5000000>; 139 regulator-max-microvolt = <5000000>; 140 vin-supply = <&vcc12v_dcin>; 141 }; 142 143 vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { 144 compatible = "regulator-fixed"; 145 enable-active-high; 146 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; 147 pinctrl-names = "default"; 148 pinctrl-0 = <&pcie_enable_h>; 149 regulator-name = "vcc3v3_pcie_p"; 150 regulator-min-microvolt = <3300000>; 151 regulator-max-microvolt = <3300000>; 152 vin-supply = <&vcc_3v3>; 153 }; 154 155 vcc5v0_usb: vcc5v0_usb { 156 compatible = "regulator-fixed"; 157 regulator-name = "vcc5v0_usb"; 158 regulator-always-on; 159 regulator-boot-on; 160 regulator-min-microvolt = <5000000>; 161 regulator-max-microvolt = <5000000>; 162 vin-supply = <&vcc12v_dcin>; 163 }; 164 165 /* all four ports are controlled by one gpio 166 * the host ports are sourced from vcc5v0_usb 167 * the otg port is sourced from vcc5v0_midu 168 */ 169 vcc5v0_usb20_host: vcc5v0_usb20_host { 170 compatible = "regulator-fixed"; 171 enable-active-high; 172 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; 173 pinctrl-names = "default"; 174 pinctrl-0 = <&vcc5v0_usb20_host_en>; 175 regulator-name = "vcc5v0_usb20_host"; 176 regulator-min-microvolt = <5000000>; 177 regulator-max-microvolt = <5000000>; 178 vin-supply = <&vcc5v0_usb>; 179 }; 180 181 vcc5v0_usb20_otg: vcc5v0_usb20_otg { 182 compatible = "regulator-fixed"; 183 enable-active-high; 184 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; 185 regulator-name = "vcc5v0_usb20_otg"; 186 regulator-min-microvolt = <5000000>; 187 regulator-max-microvolt = <5000000>; 188 vin-supply = <&dcdc_boost>; 189 }; 190 191 vcc3v3_sd: vcc3v3_sd { 192 compatible = "regulator-fixed"; 193 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 194 pinctrl-names = "default"; 195 pinctrl-0 = <&vcc_sd_h>; 196 regulator-boot-on; 197 regulator-name = "vcc3v3_sd"; 198 regulator-min-microvolt = <3300000>; 199 regulator-max-microvolt = <3300000>; 200 vin-supply = <&vcc_3v3>; 201 }; 202 203 /* sourced from vbus and vcc_bat+ via rk817 sw5 */ 204 vcc_sys: vcc_sys { 205 compatible = "regulator-fixed"; 206 regulator-name = "vcc_sys"; 207 regulator-always-on; 208 regulator-boot-on; 209 regulator-min-microvolt = <4400000>; 210 regulator-max-microvolt = <4400000>; 211 vin-supply = <&vbus>; 212 }; 213 214 /* sourced from vcc_sys, sdio module operates internally at 3.3v */ 215 vcc_wl: vcc_wl { 216 compatible = "regulator-fixed"; 217 regulator-name = "vcc_wl"; 218 regulator-always-on; 219 regulator-boot-on; 220 regulator-min-microvolt = <3300000>; 221 regulator-max-microvolt = <3300000>; 222 vin-supply = <&vcc_sys>; 223 }; 224}; 225 226&combphy1 { 227 status = "okay"; 228}; 229 230&combphy2 { 231 status = "okay"; 232}; 233 234&cpu0 { 235 cpu-supply = <&vdd_cpu>; 236}; 237 238&cpu1 { 239 cpu-supply = <&vdd_cpu>; 240}; 241 242&cpu2 { 243 cpu-supply = <&vdd_cpu>; 244}; 245 246&cpu3 { 247 cpu-supply = <&vdd_cpu>; 248}; 249 250&cpu_thermal { 251 trips { 252 cpu_hot: cpu_hot { 253 temperature = <55000>; 254 hysteresis = <2000>; 255 type = "active"; 256 }; 257 }; 258 259 cooling-maps { 260 map1 { 261 trip = <&cpu_hot>; 262 cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 263 }; 264 }; 265}; 266 267&gmac1 { 268 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; 269 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; 270 clock_in_out = "input"; 271 phy-supply = <&vcc_3v3>; 272 phy-mode = "rgmii"; 273 pinctrl-names = "default"; 274 pinctrl-0 = <&gmac1m0_miim 275 &gmac1m0_tx_bus2 276 &gmac1m0_rx_bus2 277 &gmac1m0_rgmii_clk 278 &gmac1m0_clkinout 279 &gmac1m0_rgmii_bus>; 280 snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; 281 snps,reset-active-low; 282 /* Reset time is 20ms, 100ms for rtl8211f */ 283 snps,reset-delays-us = <0 20000 100000>; 284 tx_delay = <0x30>; 285 rx_delay = <0x10>; 286 phy-handle = <&rgmii_phy1>; 287 status = "okay"; 288}; 289 290&gpu { 291 mali-supply = <&vdd_gpu>; 292 status = "okay"; 293}; 294 295&hdmi { 296 avdd-0v9-supply = <&vdda_0v9>; 297 avdd-1v8-supply = <&vcc_1v8>; 298 status = "okay"; 299}; 300 301&hdmi_in { 302 hdmi_in_vp0: endpoint { 303 remote-endpoint = <&vp0_out_hdmi>; 304 }; 305}; 306 307&hdmi_out { 308 hdmi_out_con: endpoint { 309 remote-endpoint = <&hdmi_con_in>; 310 }; 311}; 312 313&hdmi_sound { 314 status = "okay"; 315}; 316 317&i2c0 { 318 status = "okay"; 319 320 vdd_cpu: regulator@1c { 321 compatible = "tcs,tcs4525"; 322 reg = <0x1c>; 323 fcs,suspend-voltage-selector = <1>; 324 regulator-name = "vdd_cpu"; 325 regulator-min-microvolt = <800000>; 326 regulator-max-microvolt = <1150000>; 327 regulator-ramp-delay = <2300>; 328 regulator-always-on; 329 regulator-boot-on; 330 vin-supply = <&vcc_sys>; 331 332 regulator-state-mem { 333 regulator-off-in-suspend; 334 }; 335 }; 336 337 rk817: pmic@20 { 338 compatible = "rockchip,rk817"; 339 reg = <0x20>; 340 interrupt-parent = <&gpio0>; 341 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; 342 assigned-clocks = <&cru I2S1_MCLKOUT_TX>; 343 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; 344 clock-names = "mclk"; 345 clocks = <&cru I2S1_MCLKOUT_TX>; 346 clock-output-names = "rk808-clkout1", "rk808-clkout2"; 347 #clock-cells = <1>; 348 pinctrl-names = "default"; 349 pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; 350 rockchip,system-power-controller; 351 #sound-dai-cells = <0>; 352 wakeup-source; 353 354 vcc1-supply = <&vcc_sys>; 355 vcc2-supply = <&vcc_sys>; 356 vcc3-supply = <&vcc_sys>; 357 vcc4-supply = <&vcc_sys>; 358 vcc5-supply = <&vcc_sys>; 359 vcc6-supply = <&vcc_sys>; 360 vcc7-supply = <&vcc_sys>; 361 vcc8-supply = <&vcc_sys>; 362 vcc9-supply = <&dcdc_boost>; 363 364 regulators { 365 vdd_logic: DCDC_REG1 { 366 regulator-always-on; 367 regulator-boot-on; 368 regulator-min-microvolt = <500000>; 369 regulator-max-microvolt = <1350000>; 370 regulator-ramp-delay = <6001>; 371 regulator-initial-mode = <0x2>; 372 regulator-name = "vdd_logic"; 373 regulator-state-mem { 374 regulator-on-in-suspend; 375 regulator-suspend-microvolt = <900000>; 376 }; 377 }; 378 379 vdd_gpu: DCDC_REG2 { 380 regulator-always-on; 381 regulator-boot-on; 382 regulator-min-microvolt = <500000>; 383 regulator-max-microvolt = <1350000>; 384 regulator-ramp-delay = <6001>; 385 regulator-initial-mode = <0x2>; 386 regulator-name = "vdd_gpu"; 387 regulator-state-mem { 388 regulator-off-in-suspend; 389 }; 390 }; 391 392 vcc_ddr: DCDC_REG3 { 393 regulator-always-on; 394 regulator-boot-on; 395 regulator-initial-mode = <0x2>; 396 regulator-name = "vcc_ddr"; 397 regulator-state-mem { 398 regulator-on-in-suspend; 399 }; 400 }; 401 402 vcc_3v3: DCDC_REG4 { 403 regulator-always-on; 404 regulator-boot-on; 405 regulator-min-microvolt = <3300000>; 406 regulator-max-microvolt = <3300000>; 407 regulator-initial-mode = <0x2>; 408 regulator-name = "vcc_3v3"; 409 regulator-state-mem { 410 regulator-off-in-suspend; 411 }; 412 }; 413 414 vcca1v8_pmu: LDO_REG1 { 415 regulator-always-on; 416 regulator-boot-on; 417 regulator-min-microvolt = <1800000>; 418 regulator-max-microvolt = <1800000>; 419 regulator-name = "vcca1v8_pmu"; 420 regulator-state-mem { 421 regulator-on-in-suspend; 422 regulator-suspend-microvolt = <1800000>; 423 }; 424 }; 425 426 vdda_0v9: LDO_REG2 { 427 regulator-always-on; 428 regulator-boot-on; 429 regulator-min-microvolt = <900000>; 430 regulator-max-microvolt = <900000>; 431 regulator-name = "vdda_0v9"; 432 regulator-state-mem { 433 regulator-off-in-suspend; 434 }; 435 }; 436 437 vdda0v9_pmu: LDO_REG3 { 438 regulator-always-on; 439 regulator-boot-on; 440 regulator-min-microvolt = <900000>; 441 regulator-max-microvolt = <900000>; 442 regulator-name = "vdda0v9_pmu"; 443 regulator-state-mem { 444 regulator-on-in-suspend; 445 regulator-suspend-microvolt = <900000>; 446 }; 447 }; 448 449 vccio_acodec: LDO_REG4 { 450 regulator-always-on; 451 regulator-boot-on; 452 regulator-min-microvolt = <3300000>; 453 regulator-max-microvolt = <3300000>; 454 regulator-name = "vccio_acodec"; 455 regulator-state-mem { 456 regulator-off-in-suspend; 457 }; 458 }; 459 460 vccio_sd: LDO_REG5 { 461 regulator-always-on; 462 regulator-boot-on; 463 regulator-min-microvolt = <1800000>; 464 regulator-max-microvolt = <3300000>; 465 regulator-name = "vccio_sd"; 466 regulator-state-mem { 467 regulator-off-in-suspend; 468 }; 469 }; 470 471 vcc3v3_pmu: LDO_REG6 { 472 regulator-always-on; 473 regulator-boot-on; 474 regulator-min-microvolt = <3300000>; 475 regulator-max-microvolt = <3300000>; 476 regulator-name = "vcc3v3_pmu"; 477 regulator-state-mem { 478 regulator-on-in-suspend; 479 regulator-suspend-microvolt = <3300000>; 480 }; 481 }; 482 483 vcc_1v8: LDO_REG7 { 484 regulator-always-on; 485 regulator-boot-on; 486 regulator-min-microvolt = <1800000>; 487 regulator-max-microvolt = <1800000>; 488 regulator-name = "vcc_1v8"; 489 regulator-state-mem { 490 regulator-off-in-suspend; 491 }; 492 }; 493 494 vcc1v8_dvp: LDO_REG8 { 495 regulator-always-on; 496 regulator-boot-on; 497 regulator-min-microvolt = <1800000>; 498 regulator-max-microvolt = <1800000>; 499 regulator-name = "vcc1v8_dvp"; 500 regulator-state-mem { 501 regulator-off-in-suspend; 502 }; 503 }; 504 505 vcc2v8_dvp: LDO_REG9 { 506 regulator-always-on; 507 regulator-boot-on; 508 regulator-min-microvolt = <2800000>; 509 regulator-max-microvolt = <2800000>; 510 regulator-name = "vcc2v8_dvp"; 511 regulator-state-mem { 512 regulator-off-in-suspend; 513 }; 514 }; 515 516 dcdc_boost: BOOST { 517 regulator-always-on; 518 regulator-boot-on; 519 regulator-min-microvolt = <5000000>; 520 regulator-max-microvolt = <5000000>; 521 regulator-name = "boost"; 522 regulator-state-mem { 523 regulator-off-in-suspend; 524 }; 525 }; 526 527 otg_switch: OTG_SWITCH { 528 regulator-name = "otg_switch"; 529 regulator-state-mem { 530 regulator-off-in-suspend; 531 }; 532 }; 533 }; 534 }; 535}; 536 537/* i2c3 is exposed on con40 538 * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 539 * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 540 */ 541&i2c3 { 542 status = "okay"; 543}; 544 545&i2s0_8ch { 546 status = "okay"; 547}; 548 549&i2s1_8ch { 550 pinctrl-names = "default"; 551 pinctrl-0 = <&i2s1m0_sclktx 552 &i2s1m0_lrcktx 553 &i2s1m0_sdi0 554 &i2s1m0_sdo0>; 555 rockchip,trcm-sync-tx-only; 556 status = "okay"; 557}; 558 559&mdio1 { 560 rgmii_phy1: ethernet-phy@0 { 561 compatible = "ethernet-phy-ieee802.3-c22"; 562 reg = <0>; 563 }; 564}; 565 566&pcie2x1 { 567 pinctrl-names = "default"; 568 pinctrl-0 = <&pcie_reset_h>; 569 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; 570 vpcie3v3-supply = <&vcc3v3_pcie_p>; 571 status = "okay"; 572}; 573 574&pinctrl { 575 bt { 576 bt_enable_h: bt-enable-h { 577 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; 578 }; 579 580 bt_host_wake_l: bt-host-wake-l { 581 rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; 582 }; 583 584 bt_wake_l: bt-wake-l { 585 rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; 586 }; 587 }; 588 589 fan { 590 fan_en_h: fan-en-h { 591 rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; 592 }; 593 }; 594 595 leds { 596 work_led_enable_h: work-led-enable-h { 597 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 598 }; 599 600 diy_led_enable_h: diy-led-enable-h { 601 rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 602 }; 603 }; 604 605 pcie { 606 pcie_enable_h: pcie-enable-h { 607 rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; 608 }; 609 610 pcie_reset_h: pcie-reset-h { 611 rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 612 }; 613 }; 614 615 pmic { 616 pmic_int_l: pmic-int-l { 617 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 618 }; 619 }; 620 621 usb2 { 622 vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { 623 rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; 624 }; 625 }; 626 627 sdio-pwrseq { 628 wifi_enable_h: wifi-enable-h { 629 rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; 630 }; 631 }; 632 633 vcc_sd { 634 vcc_sd_h: vcc-sd-h { 635 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; 636 }; 637 }; 638}; 639 640&pmu_io_domains { 641 pmuio1-supply = <&vcc3v3_pmu>; 642 pmuio2-supply = <&vcc3v3_pmu>; 643 vccio1-supply = <&vccio_acodec>; 644 vccio2-supply = <&vcc_1v8>; 645 vccio3-supply = <&vccio_sd>; 646 vccio4-supply = <&vcc_1v8>; 647 vccio5-supply = <&vcc_3v3>; 648 vccio6-supply = <&vcc1v8_dvp>; 649 vccio7-supply = <&vcc_3v3>; 650 status = "okay"; 651}; 652 653&sdhci { 654 bus-width = <8>; 655 mmc-hs200-1_8v; 656 non-removable; 657 vmmc-supply = <&vcc_3v3>; 658 vqmmc-supply = <&vcc_1v8>; 659 status = "okay"; 660}; 661 662&sdmmc0 { 663 bus-width = <4>; 664 cap-sd-highspeed; 665 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; 666 disable-wp; 667 pinctrl-names = "default"; 668 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; 669 sd-uhs-sdr104; 670 vmmc-supply = <&vcc3v3_sd>; 671 vqmmc-supply = <&vccio_sd>; 672 status = "okay"; 673}; 674 675&sdmmc1 { 676 bus-width = <4>; 677 cap-sd-highspeed; 678 cap-sdio-irq; 679 keep-power-in-suspend; 680 mmc-pwrseq = <&sdio_pwrseq>; 681 non-removable; 682 pinctrl-names = "default"; 683 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; 684 sd-uhs-sdr104; 685 vmmc-supply = <&vcc_wl>; 686 vqmmc-supply = <&vcc_1v8>; 687 status = "okay"; 688}; 689 690&sfc { 691 pinctrl-0 = <&fspi_pins>; 692 pinctrl-names = "default"; 693 #address-cells = <1>; 694 #size-cells = <0>; 695 status = "disabled"; 696 697 flash@0 { 698 compatible = "jedec,spi-nor"; 699 reg = <0>; 700 spi-max-frequency = <24000000>; 701 spi-rx-bus-width = <4>; 702 spi-tx-bus-width = <1>; 703 }; 704}; 705 706/* spdif is exposed on con40 pin 18 */ 707&spdif { 708 status = "okay"; 709}; 710 711/* spi1 is exposed on con40 712 * pin 11 - spi1_mosi_m1 713 * pin 13 - spi1_miso_m1 714 * pin 15 - spi1_clk_m1 715 * pin 17 - spi1_cs0_m1 716 */ 717&spi1 { 718 pinctrl-names = "default"; 719 pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; 720}; 721 722&tsadc { 723 /* tshut mode 0:CRU 1:GPIO */ 724 rockchip,hw-tshut-mode = <1>; 725 /* tshut polarity 0:LOW 1:HIGH */ 726 rockchip,hw-tshut-polarity = <0>; 727 status = "okay"; 728}; 729 730/* uart0 is exposed on con40 731 * pin 12 - uart0_tx 732 * pin 14 - uart0_rx 733 */ 734&uart0 { 735 pinctrl-names = "default"; 736 pinctrl-0 = <&uart0_xfer>; 737 status = "okay"; 738}; 739 740&uart1 { 741 pinctrl-names = "default"; 742 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; 743 status = "okay"; 744 uart-has-rtscts; 745 746 bluetooth { 747 compatible = "brcm,bcm43438-bt"; 748 clocks = <&rk817 1>; 749 clock-names = "lpo"; 750 host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; 751 device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; 752 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; 753 pinctrl-names = "default"; 754 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; 755 vbat-supply = <&vcc_sys>; 756 vddio-supply = <&vcca1v8_pmu>; 757 max-speed = <3000000>; 758 }; 759}; 760 761/* uart2 is exposed on con40 762 * pin 8 - uart2_tx_m0_debug 763 * pin 10 - uart2_rx_m0_debug 764 */ 765&uart2 { 766 status = "okay"; 767}; 768 769&usb_host0_ehci { 770 status = "okay"; 771}; 772 773&usb_host0_ohci { 774 status = "okay"; 775}; 776 777&usb_host1_ehci { 778 status = "okay"; 779}; 780 781&usb_host1_ohci { 782 status = "okay"; 783}; 784 785&usb_host0_xhci { 786 dr_mode = "host"; 787 status = "okay"; 788}; 789 790/* usb3 controller is muxed with sata1 */ 791&usb_host1_xhci { 792 status = "okay"; 793}; 794 795&usb2phy0 { 796 status = "okay"; 797}; 798 799&usb2phy0_host { 800 phy-supply = <&vcc5v0_usb20_host>; 801 status = "okay"; 802}; 803 804&usb2phy0_otg { 805 phy-supply = <&vcc5v0_usb20_otg>; 806 status = "okay"; 807}; 808 809&usb2phy1 { 810 status = "okay"; 811}; 812 813&usb2phy1_host { 814 phy-supply = <&vcc5v0_usb20_host>; 815 status = "okay"; 816}; 817 818&usb2phy1_otg { 819 phy-supply = <&vcc5v0_usb20_host>; 820 status = "okay"; 821}; 822 823&vop { 824 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; 825 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; 826 status = "okay"; 827}; 828 829&vop_mmu { 830 status = "okay"; 831}; 832 833&vp0 { 834 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { 835 reg = <ROCKCHIP_VOP2_EP_HDMI0>; 836 remote-endpoint = <&hdmi_in_vp0>; 837 }; 838}; 839