1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3/dts-v1/; 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/input/linux-event-codes.h> 7#include <dt-bindings/leds/common.h> 8#include <dt-bindings/pinctrl/rockchip.h> 9#include <dt-bindings/soc/rockchip,vop2.h> 10#include "rk3566.dtsi" 11 12/ { 13 chosen: chosen { 14 stdout-path = "serial2:1500000n8"; 15 }; 16 17 adc-joystick { 18 compatible = "adc-joystick"; 19 io-channels = <&adc_mux 0>, 20 <&adc_mux 1>, 21 <&adc_mux 2>, 22 <&adc_mux 3>; 23 pinctrl-0 = <&joy_mux_en>; 24 pinctrl-names = "default"; 25 poll-interval = <60>; 26 #address-cells = <1>; 27 #size-cells = <0>; 28 29 axis@0 { 30 reg = <0>; 31 abs-flat = <32>; 32 abs-fuzz = <32>; 33 abs-range = <1023 15>; 34 linux,code = <ABS_X>; 35 }; 36 37 axis@1 { 38 reg = <1>; 39 abs-flat = <32>; 40 abs-fuzz = <32>; 41 abs-range = <15 1023>; 42 linux,code = <ABS_RX>; 43 }; 44 45 axis@2 { 46 reg = <2>; 47 abs-flat = <32>; 48 abs-fuzz = <32>; 49 abs-range = <15 1023>; 50 linux,code = <ABS_Y>; 51 }; 52 53 axis@3 { 54 reg = <3>; 55 abs-flat = <32>; 56 abs-fuzz = <32>; 57 abs-range = <1023 15>; 58 linux,code = <ABS_RY>; 59 }; 60 }; 61 62 adc_keys: adc-keys { 63 compatible = "adc-keys"; 64 io-channels = <&saradc 0>; 65 io-channel-names = "buttons"; 66 keyup-threshold-microvolt = <1800000>; 67 poll-interval = <60>; 68 69 /* 70 * Button is mapped to F key in BSP kernel, but 71 * according to input guidelines it should be mode. 72 */ 73 button-mode { 74 label = "MODE"; 75 linux,code = <BTN_MODE>; 76 press-threshold-microvolt = <1750>; 77 }; 78 }; 79 80 adc_mux: adc-mux { 81 compatible = "io-channel-mux"; 82 channels = "left_x", "right_x", "left_y", "right_y"; 83 #io-channel-cells = <1>; 84 io-channels = <&saradc 3>; 85 io-channel-names = "parent"; 86 mux-controls = <&gpio_mux>; 87 settle-time-us = <100>; 88 }; 89 90 gpio_keys_control: gpio-keys-control { 91 compatible = "gpio-keys"; 92 pinctrl-0 = <&btn_pins_ctrl>; 93 pinctrl-names = "default"; 94 95 button-b { 96 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; 97 label = "SOUTH"; 98 linux,code = <BTN_SOUTH>; 99 }; 100 101 button-down { 102 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; 103 label = "DPAD-DOWN"; 104 linux,code = <BTN_DPAD_DOWN>; 105 }; 106 107 button-l1 { 108 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; 109 label = "TL"; 110 linux,code = <BTN_TL>; 111 }; 112 113 button-l2 { 114 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; 115 label = "TL2"; 116 linux,code = <BTN_TL2>; 117 }; 118 119 button-select { 120 gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; 121 label = "SELECT"; 122 linux,code = <BTN_SELECT>; 123 }; 124 125 button-start { 126 gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; 127 label = "START"; 128 linux,code = <BTN_START>; 129 }; 130 131 button-thumbl { 132 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; 133 label = "THUMBL"; 134 linux,code = <BTN_THUMBL>; 135 }; 136 137 button-thumbr { 138 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; 139 label = "THUMBR"; 140 linux,code = <BTN_THUMBR>; 141 }; 142 143 button-up { 144 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; 145 label = "DPAD-UP"; 146 linux,code = <BTN_DPAD_UP>; 147 }; 148 149 button-x { 150 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; 151 label = "NORTH"; 152 linux,code = <BTN_NORTH>; 153 }; 154 }; 155 156 gpio_keys_vol: gpio-keys-vol { 157 compatible = "gpio-keys"; 158 autorepeat; 159 pinctrl-0 = <&btn_pins_vol>; 160 pinctrl-names = "default"; 161 162 button-vol-down { 163 gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; 164 label = "VOLUMEDOWN"; 165 linux,code = <KEY_VOLUMEDOWN>; 166 }; 167 168 button-vol-up { 169 gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; 170 label = "VOLUMEUP"; 171 linux,code = <KEY_VOLUMEUP>; 172 }; 173 }; 174 175 gpio_mux: mux-controller { 176 compatible = "gpio-mux"; 177 mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, 178 <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; 179 #mux-control-cells = <0>; 180 }; 181 182 hdmi-con { 183 compatible = "hdmi-connector"; 184 ddc-i2c-bus = <&i2c5>; 185 type = "c"; 186 187 port { 188 hdmi_con_in: endpoint { 189 remote-endpoint = <&hdmi_out_con>; 190 }; 191 }; 192 }; 193 194 leds: gpio-leds { 195 compatible = "gpio-leds"; 196 pinctrl-0 = <&led_pins>; 197 pinctrl-names = "default"; 198 199 green_led: led-0 { 200 color = <LED_COLOR_ID_GREEN>; 201 default-state = "on"; 202 function = LED_FUNCTION_POWER; 203 gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; 204 }; 205 206 amber_led: led-1 { 207 color = <LED_COLOR_ID_AMBER>; 208 function = LED_FUNCTION_CHARGING; 209 gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; 210 retain-state-suspended; 211 }; 212 213 red_led: led-2 { 214 color = <LED_COLOR_ID_RED>; 215 default-state = "off"; 216 function = LED_FUNCTION_STATUS; 217 gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; 218 }; 219 }; 220 221 sdio_pwrseq: sdio-pwrseq { 222 compatible = "mmc-pwrseq-simple"; 223 clocks = <&rk817 1>; 224 clock-names = "ext_clock"; 225 pinctrl-0 = <&wifi_enable_h>; 226 pinctrl-names = "default"; 227 post-power-on-delay-ms = <200>; 228 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; 229 }; 230 231 vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { 232 compatible = "regulator-fixed"; 233 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; 234 enable-active-high; 235 pinctrl-0 = <&vcc_lcd_h>; 236 pinctrl-names = "default"; 237 regulator-boot-on; 238 regulator-min-microvolt = <3300000>; 239 regulator-max-microvolt = <3300000>; 240 regulator-name = "vcc3v3_lcd0_n"; 241 vin-supply = <&vcc_3v3>; 242 regulator-state-mem { 243 regulator-off-in-suspend; 244 }; 245 }; 246 247 vcc_sys: regulator-vcc-sys { 248 compatible = "regulator-fixed"; 249 regulator-always-on; 250 regulator-boot-on; 251 regulator-min-microvolt = <3800000>; 252 regulator-max-microvolt = <3800000>; 253 regulator-name = "vcc_sys"; 254 }; 255 256 vcc_wifi: regulator-vcc-wifi { 257 compatible = "regulator-fixed"; 258 enable-active-high; 259 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; 260 pinctrl-0 = <&vcc_wifi_h>; 261 pinctrl-names = "default"; 262 regulator-always-on; 263 regulator-boot-on; 264 regulator-min-microvolt = <3300000>; 265 regulator-max-microvolt = <3300000>; 266 regulator-name = "vcc_wifi"; 267 }; 268 269 vibrator: pwm-vibrator { 270 compatible = "pwm-vibrator"; 271 pwm-names = "enable"; 272 pwms = <&pwm5 0 1000000000 0>; 273 }; 274}; 275 276&combphy1 { 277 status = "okay"; 278}; 279 280&cpu0 { 281 cpu-supply = <&vdd_cpu>; 282}; 283 284&cpu1 { 285 cpu-supply = <&vdd_cpu>; 286}; 287 288&cpu2 { 289 cpu-supply = <&vdd_cpu>; 290}; 291 292&cpu3 { 293 cpu-supply = <&vdd_cpu>; 294}; 295 296&gpu { 297 mali-supply = <&vdd_gpu>; 298 status = "okay"; 299}; 300 301&hdmi { 302 ddc-i2c-bus = <&i2c5>; 303 pinctrl-0 = <&hdmitxm0_cec>; 304 pinctrl-names = "default"; 305 status = "okay"; 306}; 307 308&hdmi_in { 309 hdmi_in_vp0: endpoint { 310 remote-endpoint = <&vp0_out_hdmi>; 311 }; 312}; 313 314&hdmi_out { 315 hdmi_out_con: endpoint { 316 remote-endpoint = <&hdmi_con_in>; 317 }; 318}; 319 320&hdmi_sound { 321 status = "okay"; 322}; 323 324&i2c0 { 325 status = "okay"; 326 327 rk817: pmic@20 { 328 compatible = "rockchip,rk817"; 329 reg = <0x20>; 330 interrupt-parent = <&gpio0>; 331 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; 332 clock-output-names = "rk808-clkout1", "rk808-clkout2"; 333 clock-names = "mclk"; 334 clocks = <&cru I2S1_MCLKOUT_TX>; 335 assigned-clocks = <&cru I2S1_MCLKOUT_TX>; 336 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; 337 #clock-cells = <1>; 338 #sound-dai-cells = <0>; 339 pinctrl-names = "default"; 340 pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; 341 wakeup-source; 342 343 vcc1-supply = <&vcc_sys>; 344 vcc2-supply = <&vcc_sys>; 345 vcc3-supply = <&vcc_sys>; 346 vcc4-supply = <&vcc_sys>; 347 vcc5-supply = <&vcc_sys>; 348 vcc6-supply = <&vcc_sys>; 349 vcc7-supply = <&vcc_sys>; 350 vcc8-supply = <&vcc_sys>; 351 vcc9-supply = <&dcdc_boost>; 352 353 regulators { 354 vdd_logic: DCDC_REG1 { 355 regulator-always-on; 356 regulator-boot-on; 357 regulator-min-microvolt = <500000>; 358 regulator-max-microvolt = <1350000>; 359 regulator-init-microvolt = <900000>; 360 regulator-ramp-delay = <6001>; 361 regulator-initial-mode = <0x2>; 362 regulator-name = "vdd_logic"; 363 regulator-state-mem { 364 regulator-off-in-suspend; 365 regulator-suspend-microvolt = <900000>; 366 }; 367 }; 368 369 vdd_gpu: DCDC_REG2 { 370 regulator-always-on; 371 regulator-boot-on; 372 regulator-min-microvolt = <500000>; 373 regulator-max-microvolt = <1350000>; 374 regulator-init-microvolt = <900000>; 375 regulator-ramp-delay = <6001>; 376 regulator-initial-mode = <0x2>; 377 regulator-name = "vdd_gpu"; 378 regulator-state-mem { 379 regulator-off-in-suspend; 380 }; 381 }; 382 383 vcc_ddr: DCDC_REG3 { 384 regulator-always-on; 385 regulator-boot-on; 386 regulator-initial-mode = <0x2>; 387 regulator-name = "vcc_ddr"; 388 regulator-state-mem { 389 regulator-on-in-suspend; 390 }; 391 }; 392 393 vcc_3v3: DCDC_REG4 { 394 regulator-always-on; 395 regulator-boot-on; 396 regulator-min-microvolt = <3300000>; 397 regulator-max-microvolt = <3300000>; 398 regulator-initial-mode = <0x2>; 399 regulator-name = "vcc_3v3"; 400 regulator-state-mem { 401 regulator-on-in-suspend; 402 regulator-suspend-microvolt = <3300000>; 403 }; 404 }; 405 406 vcca1v8_pmu: LDO_REG1 { 407 regulator-always-on; 408 regulator-boot-on; 409 regulator-min-microvolt = <1800000>; 410 regulator-max-microvolt = <1800000>; 411 regulator-name = "vcca1v8_pmu"; 412 regulator-state-mem { 413 regulator-on-in-suspend; 414 regulator-suspend-microvolt = <1800000>; 415 }; 416 }; 417 418 vdda_0v9: LDO_REG2 { 419 regulator-always-on; 420 regulator-boot-on; 421 regulator-min-microvolt = <900000>; 422 regulator-max-microvolt = <900000>; 423 regulator-name = "vdda_0v9"; 424 regulator-state-mem { 425 regulator-off-in-suspend; 426 }; 427 }; 428 429 vdda0v9_pmu: LDO_REG3 { 430 regulator-always-on; 431 regulator-boot-on; 432 regulator-min-microvolt = <900000>; 433 regulator-max-microvolt = <900000>; 434 regulator-name = "vdda0v9_pmu"; 435 regulator-state-mem { 436 regulator-on-in-suspend; 437 regulator-suspend-microvolt = <900000>; 438 }; 439 }; 440 441 vccio_acodec: LDO_REG4 { 442 regulator-always-on; 443 regulator-boot-on; 444 regulator-min-microvolt = <3300000>; 445 regulator-max-microvolt = <3300000>; 446 regulator-name = "vccio_acodec"; 447 regulator-state-mem { 448 regulator-off-in-suspend; 449 }; 450 }; 451 452 vccio_sd: LDO_REG5 { 453 regulator-always-on; 454 regulator-boot-on; 455 regulator-min-microvolt = <1800000>; 456 regulator-max-microvolt = <3300000>; 457 regulator-name = "vccio_sd"; 458 regulator-state-mem { 459 regulator-off-in-suspend; 460 }; 461 }; 462 463 vcc3v3_pmu: LDO_REG6 { 464 regulator-always-on; 465 regulator-boot-on; 466 regulator-min-microvolt = <3300000>; 467 regulator-max-microvolt = <3300000>; 468 regulator-name = "vcc3v3_pmu"; 469 regulator-state-mem { 470 regulator-on-in-suspend; 471 regulator-suspend-microvolt = <3300000>; 472 }; 473 }; 474 475 vcc_1v8: LDO_REG7 { 476 regulator-always-on; 477 regulator-boot-on; 478 regulator-min-microvolt = <1800000>; 479 regulator-max-microvolt = <1800000>; 480 regulator-name = "vcc_1v8"; 481 regulator-state-mem { 482 regulator-off-in-suspend; 483 }; 484 }; 485 486 vcc1v8_dvp: LDO_REG8 { 487 regulator-always-on; 488 regulator-boot-on; 489 regulator-min-microvolt = <1800000>; 490 regulator-max-microvolt = <3300000>; 491 regulator-name = "vcc1v8_dvp"; 492 regulator-state-mem { 493 regulator-off-in-suspend; 494 }; 495 }; 496 497 vcc2v8_dvp: LDO_REG9 { 498 regulator-always-on; 499 regulator-boot-on; 500 regulator-min-microvolt = <2800000>; 501 regulator-max-microvolt = <2800000>; 502 regulator-name = "vcc2v8_dvp"; 503 regulator-state-mem { 504 regulator-off-in-suspend; 505 }; 506 }; 507 508 dcdc_boost: BOOST { 509 regulator-always-on; 510 regulator-boot-on; 511 regulator-min-microvolt = <4700000>; 512 regulator-max-microvolt = <5400000>; 513 regulator-name = "boost"; 514 regulator-state-mem { 515 regulator-off-in-suspend; 516 }; 517 }; 518 519 otg_switch: OTG_SWITCH { 520 regulator-name = "otg_switch"; 521 regulator-state-mem { 522 regulator-off-in-suspend; 523 }; 524 }; 525 }; 526 }; 527 528 vdd_cpu: regulator@40 { 529 compatible = "fcs,fan53555"; 530 reg = <0x40>; 531 fcs,suspend-voltage-selector = <1>; 532 regulator-always-on; 533 regulator-boot-on; 534 regulator-min-microvolt = <712500>; 535 regulator-max-microvolt = <1390000>; 536 regulator-init-microvolt = <900000>; 537 regulator-name = "vdd_cpu"; 538 regulator-ramp-delay = <2300>; 539 vin-supply = <&vcc_sys>; 540 regulator-state-mem { 541 regulator-off-in-suspend; 542 }; 543 }; 544}; 545 546&i2c1 { 547 /* Unknown/unused device at 0x3c */ 548 status = "disabled"; 549}; 550 551&i2c5 { 552 pinctrl-0 = <&i2c5m1_xfer>; 553 pinctrl-names = "default"; 554 status = "okay"; 555}; 556 557&i2s0_8ch { 558 status = "okay"; 559}; 560 561&i2s1_8ch { 562 pinctrl-0 = <&i2s1m0_sclktx 563 &i2s1m0_lrcktx 564 &i2s1m0_sdi0 565 &i2s1m0_sdo0>; 566 pinctrl-names = "default"; 567 rockchip,trcm-sync-tx-only; 568 status = "okay"; 569}; 570 571&pinctrl { 572 gpio-btns { 573 btn_pins_ctrl: btn-pins-ctrl { 574 rockchip,pins = 575 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, 576 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, 577 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, 578 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, 579 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, 580 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, 581 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, 582 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, 583 <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, 584 <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, 585 <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, 586 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, 587 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, 588 <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, 589 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, 590 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; 591 }; 592 593 btn_pins_vol: btn-pins-vol { 594 rockchip,pins = 595 <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, 596 <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; 597 }; 598 }; 599 600 gpio-led { 601 led_pins: led-pins { 602 rockchip,pins = 603 <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>, 604 <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>, 605 <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; 606 }; 607 }; 608 609 joy-mux { 610 joy_mux_en: joy-mux-en { 611 rockchip,pins = 612 <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; 613 }; 614 }; 615 616 pmic { 617 pmic_int_l: pmic-int-l { 618 rockchip,pins = 619 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 620 }; 621 }; 622 623 sdio-pwrseq { 624 wifi_enable_h: wifi-enable-h { 625 rockchip,pins = 626 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; 627 }; 628 }; 629 630 vcc3v3-lcd { 631 vcc_lcd_h: vcc-lcd-h { 632 rockchip,pins = 633 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; 634 }; 635 }; 636 637 vcc-wifi { 638 vcc_wifi_h: vcc-wifi-h { 639 rockchip,pins = 640 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; 641 }; 642 }; 643}; 644 645&pmu_io_domains { 646 status = "okay"; 647 pmuio1-supply = <&vcc3v3_pmu>; 648 pmuio2-supply = <&vcc3v3_pmu>; 649 vccio1-supply = <&vccio_acodec>; 650 vccio3-supply = <&vccio_sd>; 651 vccio4-supply = <&vcc_1v8>; 652 vccio5-supply = <&vcc_3v3>; 653 vccio6-supply = <&vcc1v8_dvp>; 654 vccio7-supply = <&vcc_3v3>; 655}; 656 657&pwm5 { 658 status = "okay"; 659}; 660 661&saradc { 662 vref-supply = <&vcc_1v8>; 663 status = "okay"; 664}; 665 666&sdmmc0 { 667 bus-width = <4>; 668 cap-sd-highspeed; 669 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; 670 disable-wp; 671 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; 672 pinctrl-names = "default"; 673 sd-uhs-sdr104; 674 vmmc-supply = <&vcc_3v3>; 675 vqmmc-supply = <&vccio_sd>; 676 status = "okay"; 677}; 678 679&sdmmc1 { 680 bus-width = <4>; 681 cap-sd-highspeed; 682 cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; 683 disable-wp; 684 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; 685 pinctrl-names = "default"; 686 sd-uhs-sdr104; 687 vmmc-supply = <&vcc_3v3>; 688 vqmmc-supply = <&vcc1v8_dvp>; 689 status = "okay"; 690}; 691 692&sdmmc2 { 693 bus-width = <4>; 694 cap-sd-highspeed; 695 cap-sdio-irq; 696 keep-power-in-suspend; 697 mmc-pwrseq = <&sdio_pwrseq>; 698 non-removable; 699 pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; 700 pinctrl-names = "default"; 701 vmmc-supply = <&vcc_wifi>; 702 vqmmc-supply = <&vcca1v8_pmu>; 703 status = "okay"; 704}; 705 706&tsadc { 707 rockchip,hw-tshut-mode = <1>; 708 rockchip,hw-tshut-polarity = <0>; 709 status = "okay"; 710}; 711 712&uart1 { 713 pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; 714 pinctrl-names = "default"; 715 uart-has-rtscts; 716 status = "okay"; 717 718 bluetooth { 719 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8822cs-bt"; 720 device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; 721 enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; 722 host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; 723 }; 724}; 725 726&uart2 { 727 status = "okay"; 728}; 729 730/* 731 * Lack the schematics to verify, but port works as a peripheral 732 * (and not a host or OTG port). 733 */ 734&usb_host0_xhci { 735 dr_mode = "peripheral"; 736 phys = <&usb2phy0_otg>; 737 phy-names = "usb2-phy"; 738 status = "okay"; 739}; 740 741&usb_host1_ehci { 742 status = "okay"; 743}; 744 745&usb_host1_ohci { 746 status = "okay"; 747}; 748 749&usb_host1_xhci { 750 phy-names = "usb2-phy", "usb3-phy"; 751 phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; 752 status = "okay"; 753}; 754 755&usb2phy0 { 756 status = "okay"; 757}; 758 759&usb2phy0_otg { 760 status = "okay"; 761}; 762 763&usb2phy1 { 764 status = "okay"; 765}; 766 767&usb2phy1_host { 768 status = "okay"; 769}; 770 771&vop { 772 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; 773 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; 774 status = "okay"; 775}; 776 777&vop_mmu { 778 status = "okay"; 779}; 780 781&vp0 { 782 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { 783 reg = <ROCKCHIP_VOP2_EP_HDMI0>; 784 remote-endpoint = <&hdmi_in_vp0>; 785 }; 786}; 787