1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> 4 * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> 5 */ 6 7/dts-v1/; 8#include "rk3399-rock-pi-4.dtsi" 9#include "rk3399-t-opp.dtsi" 10 11/ { 12 model = "Radxa ROCK 4SE"; 13 compatible = "radxa,rock-4se", "rockchip,rk3399"; 14 15 aliases { 16 mmc2 = &sdio0; 17 }; 18}; 19 20&pinctrl { 21 usb2 { 22 vcc5v0_host_en: vcc5v0-host-en { 23 rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; 24 }; 25 }; 26}; 27 28&sdio0 { 29 status = "okay"; 30 31 brcmf: wifi@1 { 32 compatible = "brcm,bcm4329-fmac"; 33 reg = <1>; 34 interrupt-parent = <&gpio0>; 35 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; 36 interrupt-names = "host-wake"; 37 pinctrl-names = "default"; 38 pinctrl-0 = <&wifi_host_wake_l>; 39 }; 40}; 41 42&uart0 { 43 status = "okay"; 44 45 bluetooth { 46 compatible = "brcm,bcm4345c5"; 47 clocks = <&rk808 1>; 48 clock-names = "lpo"; 49 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; 50 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; 51 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; 52 max-speed = <1500000>; 53 pinctrl-names = "default"; 54 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; 55 vbat-supply = <&vcc3v3_sys>; 56 vddio-supply = <&vcc_1v8>; 57 }; 58}; 59 60&vcc5v0_host { 61 enable-active-high; 62 gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; 63 pinctrl-names = "default"; 64 pinctrl-0 = <&vcc5v0_host_en>; 65}; 66