1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Google Gru-Chromebook shared properties 4 * 5 * Copyright 2018 Google, Inc 6 */ 7 8#include "rk3399-gru.dtsi" 9 10/ { 11 pp900_ap: pp900-ap { 12 compatible = "regulator-fixed"; 13 regulator-name = "pp900_ap"; 14 15 /* EC turns on w/ pp900_ap_en; always on for AP */ 16 regulator-always-on; 17 regulator-boot-on; 18 regulator-min-microvolt = <900000>; 19 regulator-max-microvolt = <900000>; 20 21 vin-supply = <&ppvar_sys>; 22 }; 23 24 /* EC turns on w/ pp900_usb_en */ 25 pp900_usb: pp900-ap { 26 }; 27 28 /* EC turns on w/ pp900_pcie_en */ 29 pp900_pcie: pp900-ap { 30 }; 31 32 pp3000: pp3000 { 33 compatible = "regulator-fixed"; 34 regulator-name = "pp3000"; 35 pinctrl-names = "default"; 36 pinctrl-0 = <&pp3000_en>; 37 38 enable-active-high; 39 gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; 40 41 regulator-always-on; 42 regulator-boot-on; 43 regulator-min-microvolt = <3000000>; 44 regulator-max-microvolt = <3000000>; 45 46 vin-supply = <&ppvar_sys>; 47 }; 48 49 ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { 50 compatible = "pwm-regulator"; 51 regulator-name = "ppvar_centerlogic_pwm"; 52 53 pwms = <&pwm3 0 3337 0>; 54 pwm-supply = <&ppvar_sys>; 55 pwm-dutycycle-range = <100 0>; 56 pwm-dutycycle-unit = <100>; 57 58 /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ 59 regulator-always-on; 60 regulator-boot-on; 61 regulator-min-microvolt = <799434>; 62 regulator-max-microvolt = <1049925>; 63 }; 64 65 ppvar_centerlogic: ppvar-centerlogic { 66 compatible = "vctrl-regulator"; 67 regulator-name = "ppvar_centerlogic"; 68 69 regulator-min-microvolt = <799434>; 70 regulator-max-microvolt = <1049925>; 71 72 ctrl-supply = <&ppvar_centerlogic_pwm>; 73 ctrl-voltage-range = <799434 1049925>; 74 75 regulator-settling-time-up-us = <378>; 76 min-slew-down-rate = <225>; 77 ovp-threshold-percent = <16>; 78 }; 79 80 /* Schematics call this PPVAR even though it's fixed */ 81 ppvar_logic: ppvar-logic { 82 compatible = "regulator-fixed"; 83 regulator-name = "ppvar_logic"; 84 85 /* EC turns on w/ ppvar_logic_en; always on for AP */ 86 regulator-always-on; 87 regulator-boot-on; 88 regulator-min-microvolt = <900000>; 89 regulator-max-microvolt = <900000>; 90 91 vin-supply = <&ppvar_sys>; 92 }; 93 94 pp1800_audio: pp1800-audio { 95 compatible = "regulator-fixed"; 96 regulator-name = "pp1800_audio"; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pp1800_audio_en>; 99 100 enable-active-high; 101 gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; 102 103 regulator-always-on; 104 regulator-boot-on; 105 106 vin-supply = <&pp1800>; 107 }; 108 109 /* gpio is shared with pp3300_wifi_bt */ 110 pp1800_pcie: pp1800-pcie { 111 compatible = "regulator-fixed"; 112 regulator-name = "pp1800_pcie"; 113 pinctrl-names = "default"; 114 pinctrl-0 = <&wlan_module_pd_l>; 115 116 enable-active-high; 117 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; 118 119 /* 120 * Need to wait 1ms + ramp-up time before we can power on WiFi. 121 * This has been approximated as 8ms total. 122 */ 123 regulator-enable-ramp-delay = <8000>; 124 125 vin-supply = <&pp1800>; 126 }; 127 128 /* Always on; plain and simple */ 129 pp3000_ap: pp3000_emmc: pp3000 { 130 }; 131 132 pp1500_ap_io: pp1500-ap-io { 133 compatible = "regulator-fixed"; 134 regulator-name = "pp1500_ap_io"; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pp1500_en>; 137 138 enable-active-high; 139 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; 140 141 regulator-always-on; 142 regulator-boot-on; 143 regulator-min-microvolt = <1500000>; 144 regulator-max-microvolt = <1500000>; 145 146 vin-supply = <&pp1800>; 147 }; 148 149 pp3300_disp: pp3300-disp { 150 compatible = "regulator-fixed"; 151 regulator-name = "pp3300_disp"; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&pp3300_disp_en>; 154 155 enable-active-high; 156 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; 157 158 startup-delay-us = <2000>; 159 vin-supply = <&pp3300>; 160 }; 161 162 /* EC turns on w/ pp3300_usb_en_l */ 163 pp3300_usb: pp3300 { 164 }; 165 166 /* gpio is shared with pp1800_pcie and pinctrl is set there */ 167 pp3300_wifi_bt: pp3300-wifi-bt { 168 compatible = "regulator-fixed"; 169 regulator-name = "pp3300_wifi_bt"; 170 171 enable-active-high; 172 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; 173 174 vin-supply = <&pp3300>; 175 }; 176 177 /* 178 * This is a bit of a hack. The WiFi module should be reset at least 179 * 1ms after its regulators have ramped up (max rampup time is ~7ms). 180 * With some stretching of the imagination, we can call the 1.8V 181 * regulator a supply. 182 */ 183 wlan_pd_n: wlan-pd-n { 184 compatible = "regulator-fixed"; 185 regulator-name = "wlan_pd_n"; 186 pinctrl-names = "default"; 187 pinctrl-0 = <&wlan_module_reset_l>; 188 189 enable-active-high; 190 gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; 191 192 vin-supply = <&pp1800_pcie>; 193 }; 194 195 backlight: backlight { 196 compatible = "pwm-backlight"; 197 enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; 198 power-supply = <&pp3300_disp>; 199 pinctrl-names = "default"; 200 pinctrl-0 = <&bl_en>; 201 }; 202 203 gpio_keys: gpio-keys { 204 compatible = "gpio-keys"; 205 pinctrl-names = "default"; 206 pinctrl-0 = <&bt_host_wake_l>; 207 208 wake_on_bt: key-wake-on-bt { 209 label = "Wake-on-Bluetooth"; 210 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; 211 linux,code = <KEY_WAKEUP>; 212 wakeup-source; 213 }; 214 }; 215}; 216 217&ppvar_bigcpu { 218 min-slew-down-rate = <225>; 219 ovp-threshold-percent = <16>; 220}; 221 222&ppvar_litcpu { 223 min-slew-down-rate = <225>; 224 ovp-threshold-percent = <16>; 225}; 226 227&ppvar_gpu { 228 min-slew-down-rate = <225>; 229 ovp-threshold-percent = <16>; 230}; 231 232&cdn_dp { 233 extcon = <&usbc_extcon0>, <&usbc_extcon1>; 234}; 235 236&dmc { 237 center-supply = <&ppvar_centerlogic>; 238 rockchip,pd-idle-dis-freq-hz = <800000000>; 239 rockchip,sr-idle-dis-freq-hz = <800000000>; 240 rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>; 241}; 242 243&edp { 244 status = "okay"; 245 246 /* 247 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only 248 * set this here, because rk3399-gru.dtsi ensures we can generate this 249 * off GPLL=600MHz, whereas some other RK3399 boards may not. 250 */ 251 assigned-clocks = <&cru PCLK_EDP>; 252 assigned-clock-rates = <24000000>; 253 254 ports { 255 edp_out: port@1 { 256 reg = <1>; 257 #address-cells = <1>; 258 #size-cells = <0>; 259 260 edp_out_panel: endpoint@0 { 261 reg = <0>; 262 remote-endpoint = <&panel_in_edp>; 263 }; 264 }; 265 }; 266}; 267 268&gpio0 { 269 gpio-line-names = /* GPIO0 A 0-7 */ 270 "AP_RTC_CLK_IN", 271 "EC_AP_INT_L", 272 "PP1800_AUDIO_EN", 273 "BT_HOST_WAKE_L", 274 "WLAN_MODULE_PD_L", 275 "H1_INT_OD_L", 276 "CENTERLOGIC_DVS_PWM", 277 "", 278 279 /* GPIO0 B 0-4 */ 280 "WIFI_HOST_WAKE_L", 281 "PMUIO2_33_18_L", 282 "PP1500_EN", 283 "AP_EC_WARM_RESET_REQ", 284 "PP3000_EN"; 285}; 286 287&gpio1 { 288 gpio-line-names = /* GPIO1 A 0-7 */ 289 "", 290 "", 291 "SPK_PA_EN", 292 "", 293 "TRACKPAD_INT_L", 294 "AP_EC_S3_S0_L", 295 "AP_EC_OVERTEMP", 296 "AP_SPI_FLASH_MISO", 297 298 /* GPIO1 B 0-7 */ 299 "AP_SPI_FLASH_MOSI_R", 300 "AP_SPI_FLASH_CLK_R", 301 "AP_SPI_FLASH_CS_L_R", 302 "WLAN_MODULE_RESET_L", 303 "WIFI_DISABLE_L", 304 "MIC_INT", 305 "", 306 "AP_I2C_DVS_SDA", 307 308 /* GPIO1 C 0-7 */ 309 "AP_I2C_DVS_SCL", 310 "AP_BL_EN", 311 /* 312 * AP_FLASH_WP is crossystem ABI. Schematics call it 313 * AP_FW_WP or CPU1_FW_WP, depending on the variant. 314 */ 315 "AP_FLASH_WP", 316 "LITCPU_DVS_PWM", 317 "AP_I2C_AUDIO_SDA", 318 "AP_I2C_AUDIO_SCL", 319 "", 320 "HEADSET_INT_L"; 321}; 322 323&gpio2 { 324 gpio-line-names = /* GPIO2 A 0-7 */ 325 "", 326 "", 327 "SD_IO_PWR_EN", 328 "", 329 "", 330 "", 331 "", 332 "", 333 334 /* GPIO2 B 0-7 */ 335 "", 336 "", 337 "", 338 "", 339 "", 340 "", 341 "", 342 "", 343 344 /* GPIO2 C 0-7 */ 345 "", 346 "", 347 "", 348 "", 349 "AP_SPI_EC_MISO", 350 "AP_SPI_EC_MOSI", 351 "AP_SPI_EC_CLK", 352 "AP_SPI_EC_CS_L", 353 354 /* GPIO2 D 0-4 */ 355 "BT_DEV_WAKE_L", 356 "", 357 "WIFI_PCIE_CLKREQ_L", 358 "WIFI_PERST_L", 359 "SD_PWR_3000_1800_L"; 360}; 361 362&gpio3 { 363 gpio-line-names = /* GPIO3 A 0-7 */ 364 "", 365 "", 366 "", 367 "", 368 "AP_SPI_TPM_MISO", 369 "AP_SPI_TPM_MOSI_R", 370 "AP_SPI_TPM_CLK_R", 371 "AP_SPI_TPM_CS_L_R", 372 373 /* GPIO3 B 0-7 */ 374 "EC_IN_RW", 375 "", 376 "AP_I2C_TP_SDA", 377 "AP_I2C_TP_SCL", 378 "AP_I2C_TP_PU_EN", 379 "TOUCH_INT_L", 380 "", 381 "", 382 383 /* GPIO3 C 0-7 */ 384 "", 385 "", 386 "", 387 "", 388 "", 389 "", 390 "", 391 "", 392 393 /* GPIO3 D 0-7 */ 394 "I2S0_SCLK", 395 "I2S0_LRCK_RX", 396 "I2S0_LRCK_TX", 397 "I2S0_SDI_0", 398 "I2S0_SDI_1", 399 "", 400 "I2S0_SDO_1", 401 "I2S0_SDO_0"; 402}; 403 404&gpio4 { 405 gpio-line-names = /* GPIO4 A 0-7 */ 406 "I2S_MCLK", 407 "AP_I2C_MIC_SDA", 408 "AP_I2C_MIC_SCL", 409 "", 410 "", 411 "", 412 "", 413 "", 414 415 /* GPIO4 B 0-7 */ 416 "", 417 "", 418 "", 419 "", 420 "", 421 "", 422 "", 423 "", 424 425 /* GPIO4 C 0-7 */ 426 "AP_I2C_TS_SDA", 427 "AP_I2C_TS_SCL", 428 "GPU_DVS_PWM", 429 "UART_DBG_TX_AP_RX", 430 "UART_AP_TX_DBG_RX", 431 "", 432 "BIGCPU_DVS_PWM", 433 "EDP_HPD_3V0", 434 435 /* GPIO4 D 0-5 */ 436 "SD_CARD_DET_L", 437 "USB_DP_HPD", 438 "TOUCH_RESET_L", 439 "PP3300_DISP_EN", 440 "", 441 "SD_SLOT_PWR_EN"; 442}; 443 444ap_i2c_mic: &i2c1 { 445 status = "okay"; 446 447 clock-frequency = <400000>; 448 449 /* These are relatively safe rise/fall times */ 450 i2c-scl-falling-time-ns = <50>; 451 i2c-scl-rising-time-ns = <300>; 452 453 headsetcodec: rt5514@57 { 454 compatible = "realtek,rt5514"; 455 reg = <0x57>; 456 realtek,dmic-init-delay-ms = <20>; 457 }; 458}; 459 460ap_i2c_tp: &i2c5 { 461 status = "okay"; 462 463 clock-frequency = <400000>; 464 465 /* These are relatively safe rise/fall times */ 466 i2c-scl-falling-time-ns = <50>; 467 i2c-scl-rising-time-ns = <300>; 468 469 /* 470 * Note strange pullup enable. Apparently this avoids leakage but 471 * still allows us to get nice 4.7K pullups for high speed i2c 472 * transfers. Basically we want the pullup on whenever the ap is 473 * alive, so the "en" pin just gets set to output high. 474 */ 475 pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; 476}; 477 478&cros_ec { 479 cros_ec_pwm: pwm { 480 compatible = "google,cros-ec-pwm"; 481 #pwm-cells = <1>; 482 }; 483 484 usbc_extcon1: extcon1 { 485 compatible = "google,extcon-usbc-cros-ec"; 486 google,usb-port-id = <1>; 487 }; 488}; 489 490&sound { 491 rockchip,codec = <&max98357a &headsetcodec 492 &codec &wacky_spi_audio &cdn_dp>; 493}; 494 495&spi2 { 496 wacky_spi_audio: spi2@0 { 497 compatible = "realtek,rt5514"; 498 reg = <0>; 499 interrupt-parent = <&gpio1>; 500 interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; 501 pinctrl-names = "default"; 502 pinctrl-0 = <&mic_int>; 503 /* May run faster once verified. */ 504 spi-max-frequency = <10000000>; 505 wakeup-source; 506 }; 507}; 508 509&pci_rootport { 510 mvl_wifi: wifi@0,0 { 511 compatible = "pci1b4b,2b42"; 512 reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 513 0x83010000 0x0 0x00100000 0x0 0x00100000>; 514 interrupt-parent = <&gpio0>; 515 interrupts = <8 IRQ_TYPE_LEVEL_LOW>; 516 pinctrl-names = "default"; 517 pinctrl-0 = <&wlan_host_wake_l>; 518 wakeup-source; 519 }; 520}; 521 522&tcphy1 { 523 status = "okay"; 524 extcon = <&usbc_extcon1>; 525}; 526 527&u2phy1 { 528 status = "okay"; 529}; 530 531&usb_host0_ehci { 532 status = "okay"; 533}; 534 535&usb_host1_ehci { 536 status = "okay"; 537}; 538 539&usb_host1_ohci { 540 status = "okay"; 541}; 542 543&usbdrd3_1 { 544 status = "okay"; 545 extcon = <&usbc_extcon1>; 546}; 547 548&usbdrd_dwc3_1 { 549 status = "okay"; 550 dr_mode = "host"; 551}; 552 553&pinctrl { 554 discrete-regulators { 555 pp1500_en: pp1500-en { 556 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO 557 &pcfg_pull_none>; 558 }; 559 560 pp1800_audio_en: pp1800-audio-en { 561 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO 562 &pcfg_pull_down>; 563 }; 564 565 pp3000_en: pp3000-en { 566 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO 567 &pcfg_pull_none>; 568 }; 569 570 pp3300_disp_en: pp3300-disp-en { 571 rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO 572 &pcfg_pull_none>; 573 }; 574 575 wlan_module_pd_l: wlan-module-pd-l { 576 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO 577 &pcfg_pull_down>; 578 }; 579 }; 580}; 581 582&wifi { 583 wifi_perst_l: wifi-perst-l { 584 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 585 }; 586 587 wlan_host_wake_l: wlan-host-wake-l { 588 /* Kevin has an external pull up, but Bob does not */ 589 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; 590 }; 591}; 592