1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. 4 */ 5 6/dts-v1/; 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/pwm/pwm.h> 9#include "rk3399.dtsi" 10#include "rk3399-opp.dtsi" 11 12/ { 13 model = "Firefly-RK3399 Board"; 14 compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; 15 16 chosen { 17 stdout-path = "serial2:1500000n8"; 18 }; 19 20 backlight: backlight { 21 compatible = "pwm-backlight"; 22 enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; 23 pwms = <&pwm0 0 25000 0>; 24 brightness-levels = < 25 0 1 2 3 4 5 6 7 26 8 9 10 11 12 13 14 15 27 16 17 18 19 20 21 22 23 28 24 25 26 27 28 29 30 31 29 32 33 34 35 36 37 38 39 30 40 41 42 43 44 45 46 47 31 48 49 50 51 52 53 54 55 32 56 57 58 59 60 61 62 63 33 64 65 66 67 68 69 70 71 34 72 73 74 75 76 77 78 79 35 80 81 82 83 84 85 86 87 36 88 89 90 91 92 93 94 95 37 96 97 98 99 100 101 102 103 38 104 105 106 107 108 109 110 111 39 112 113 114 115 116 117 118 119 40 120 121 122 123 124 125 126 127 41 128 129 130 131 132 133 134 135 42 136 137 138 139 140 141 142 143 43 144 145 146 147 148 149 150 151 44 152 153 154 155 156 157 158 159 45 160 161 162 163 164 165 166 167 46 168 169 170 171 172 173 174 175 47 176 177 178 179 180 181 182 183 48 184 185 186 187 188 189 190 191 49 192 193 194 195 196 197 198 199 50 200 201 202 203 204 205 206 207 51 208 209 210 211 212 213 214 215 52 216 217 218 219 220 221 222 223 53 224 225 226 227 228 229 230 231 54 232 233 234 235 236 237 238 239 55 240 241 242 243 244 245 246 247 56 248 249 250 251 252 253 254 255>; 57 default-brightness-level = <200>; 58 }; 59 60 clkin_gmac: external-gmac-clock { 61 compatible = "fixed-clock"; 62 clock-frequency = <125000000>; 63 clock-output-names = "clkin_gmac"; 64 #clock-cells = <0>; 65 }; 66 67 dc_12v: dc-12v { 68 compatible = "regulator-fixed"; 69 regulator-name = "dc_12v"; 70 regulator-always-on; 71 regulator-boot-on; 72 regulator-min-microvolt = <12000000>; 73 regulator-max-microvolt = <12000000>; 74 }; 75 76 gpio-keys { 77 compatible = "gpio-keys"; 78 autorepeat; 79 pinctrl-names = "default"; 80 pinctrl-0 = <&pwrbtn>; 81 82 power { 83 debounce-interval = <100>; 84 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 85 label = "GPIO Key Power"; 86 linux,code = <KEY_POWER>; 87 wakeup-source; 88 }; 89 }; 90 91 leds { 92 compatible = "gpio-leds"; 93 pinctrl-names = "default"; 94 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; 95 96 work_led: led-0 { 97 label = "work"; 98 default-state = "on"; 99 gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; 100 }; 101 102 diy_led: led-1 { 103 label = "diy"; 104 default-state = "off"; 105 gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; 106 }; 107 }; 108 109 rt5640-sound { 110 compatible = "simple-audio-card"; 111 simple-audio-card,name = "rockchip,rt5640-codec"; 112 simple-audio-card,format = "i2s"; 113 simple-audio-card,mclk-fs = <256>; 114 simple-audio-card,widgets = 115 "Microphone", "Mic Jack", 116 "Headphone", "Headphone Jack"; 117 simple-audio-card,routing = 118 "Mic Jack", "MICBIAS1", 119 "IN1P", "Mic Jack", 120 "Headphone Jack", "HPOL", 121 "Headphone Jack", "HPOR"; 122 123 simple-audio-card,cpu { 124 sound-dai = <&i2s1>; 125 }; 126 127 simple-audio-card,codec { 128 sound-dai = <&rt5640>; 129 }; 130 }; 131 132 sdio_pwrseq: sdio-pwrseq { 133 compatible = "mmc-pwrseq-simple"; 134 clocks = <&rk808 1>; 135 clock-names = "ext_clock"; 136 pinctrl-names = "default"; 137 pinctrl-0 = <&wifi_enable_h>; 138 139 /* 140 * On the module itself this is one of these (depending 141 * on the actual card populated): 142 * - SDIO_RESET_L_WL_REG_ON 143 * - PDN (power down when low) 144 */ 145 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; 146 }; 147 148 /* switched by pmic_sleep */ 149 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { 150 compatible = "regulator-fixed"; 151 regulator-name = "vcc1v8_s3"; 152 regulator-always-on; 153 regulator-boot-on; 154 regulator-min-microvolt = <1800000>; 155 regulator-max-microvolt = <1800000>; 156 vin-supply = <&vcc_1v8>; 157 }; 158 159 vcc3v3_pcie: vcc3v3-pcie-regulator { 160 compatible = "regulator-fixed"; 161 enable-active-high; 162 gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; 163 pinctrl-names = "default"; 164 pinctrl-0 = <&pcie_pwr_en>; 165 regulator-name = "vcc3v3_pcie"; 166 regulator-always-on; 167 regulator-boot-on; 168 vin-supply = <&dc_12v>; 169 }; 170 171 vcc3v3_sys: vcc3v3-sys { 172 compatible = "regulator-fixed"; 173 regulator-name = "vcc3v3_sys"; 174 regulator-always-on; 175 regulator-boot-on; 176 regulator-min-microvolt = <3300000>; 177 regulator-max-microvolt = <3300000>; 178 vin-supply = <&vcc_sys>; 179 }; 180 181 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ 182 vcc5v0_host: vcc5v0-host-regulator { 183 compatible = "regulator-fixed"; 184 enable-active-high; 185 gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; 186 pinctrl-names = "default"; 187 pinctrl-0 = <&vcc5v0_host_en>; 188 regulator-name = "vcc5v0_host"; 189 regulator-always-on; 190 vin-supply = <&vcc_sys>; 191 }; 192 193 vcc_sys: vcc-sys { 194 compatible = "regulator-fixed"; 195 regulator-name = "vcc_sys"; 196 regulator-always-on; 197 regulator-boot-on; 198 regulator-min-microvolt = <5000000>; 199 regulator-max-microvolt = <5000000>; 200 vin-supply = <&dc_12v>; 201 }; 202 203 vdd_log: vdd-log { 204 compatible = "pwm-regulator"; 205 pwms = <&pwm2 0 25000 1>; 206 regulator-name = "vdd_log"; 207 regulator-always-on; 208 regulator-boot-on; 209 regulator-min-microvolt = <430000>; 210 regulator-max-microvolt = <1400000>; 211 vin-supply = <&vcc_sys>; 212 }; 213}; 214 215&cpu_l0 { 216 cpu-supply = <&vdd_cpu_l>; 217}; 218 219&cpu_l1 { 220 cpu-supply = <&vdd_cpu_l>; 221}; 222 223&cpu_l2 { 224 cpu-supply = <&vdd_cpu_l>; 225}; 226 227&cpu_l3 { 228 cpu-supply = <&vdd_cpu_l>; 229}; 230 231&cpu_b0 { 232 cpu-supply = <&vdd_cpu_b>; 233}; 234 235&cpu_b1 { 236 cpu-supply = <&vdd_cpu_b>; 237}; 238 239&emmc_phy { 240 status = "okay"; 241}; 242 243&gmac { 244 assigned-clocks = <&cru SCLK_RMII_SRC>; 245 assigned-clock-parents = <&clkin_gmac>; 246 clock_in_out = "input"; 247 phy-supply = <&vcc_lan>; 248 phy-mode = "rgmii"; 249 pinctrl-names = "default"; 250 pinctrl-0 = <&rgmii_pins>; 251 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 252 snps,reset-active-low; 253 snps,reset-delays-us = <0 10000 50000>; 254 tx_delay = <0x28>; 255 rx_delay = <0x11>; 256 status = "okay"; 257}; 258 259&hdmi { 260 ddc-i2c-bus = <&i2c3>; 261 pinctrl-names = "default"; 262 pinctrl-0 = <&hdmi_cec>; 263 status = "okay"; 264}; 265 266&i2c0 { 267 clock-frequency = <400000>; 268 i2c-scl-rising-time-ns = <168>; 269 i2c-scl-falling-time-ns = <4>; 270 status = "okay"; 271 272 rk808: pmic@1b { 273 compatible = "rockchip,rk808"; 274 reg = <0x1b>; 275 interrupt-parent = <&gpio1>; 276 interrupts = <21 IRQ_TYPE_LEVEL_LOW>; 277 #clock-cells = <1>; 278 clock-output-names = "xin32k", "rk808-clkout2"; 279 pinctrl-names = "default"; 280 pinctrl-0 = <&pmic_int_l>; 281 rockchip,system-power-controller; 282 wakeup-source; 283 284 vcc1-supply = <&vcc_sys>; 285 vcc2-supply = <&vcc_sys>; 286 vcc3-supply = <&vcc_sys>; 287 vcc4-supply = <&vcc_sys>; 288 vcc6-supply = <&vcc_sys>; 289 vcc7-supply = <&vcc_sys>; 290 vcc8-supply = <&vcc3v3_sys>; 291 vcc9-supply = <&vcc_sys>; 292 vcc10-supply = <&vcc_sys>; 293 vcc11-supply = <&vcc_sys>; 294 vcc12-supply = <&vcc3v3_sys>; 295 vddio-supply = <&vcc1v8_pmu>; 296 297 regulators { 298 vdd_center: DCDC_REG1 { 299 regulator-name = "vdd_center"; 300 regulator-always-on; 301 regulator-boot-on; 302 regulator-min-microvolt = <750000>; 303 regulator-max-microvolt = <1350000>; 304 regulator-ramp-delay = <6001>; 305 regulator-state-mem { 306 regulator-off-in-suspend; 307 }; 308 }; 309 310 vdd_cpu_l: DCDC_REG2 { 311 regulator-name = "vdd_cpu_l"; 312 regulator-always-on; 313 regulator-boot-on; 314 regulator-min-microvolt = <750000>; 315 regulator-max-microvolt = <1350000>; 316 regulator-ramp-delay = <6001>; 317 regulator-state-mem { 318 regulator-off-in-suspend; 319 }; 320 }; 321 322 vcc_ddr: DCDC_REG3 { 323 regulator-name = "vcc_ddr"; 324 regulator-always-on; 325 regulator-boot-on; 326 regulator-state-mem { 327 regulator-on-in-suspend; 328 }; 329 }; 330 331 vcc_1v8: DCDC_REG4 { 332 regulator-name = "vcc_1v8"; 333 regulator-always-on; 334 regulator-boot-on; 335 regulator-min-microvolt = <1800000>; 336 regulator-max-microvolt = <1800000>; 337 regulator-state-mem { 338 regulator-on-in-suspend; 339 regulator-suspend-microvolt = <1800000>; 340 }; 341 }; 342 343 vcc1v8_dvp: LDO_REG1 { 344 regulator-name = "vcc1v8_dvp"; 345 regulator-always-on; 346 regulator-boot-on; 347 regulator-min-microvolt = <1800000>; 348 regulator-max-microvolt = <1800000>; 349 regulator-state-mem { 350 regulator-off-in-suspend; 351 }; 352 }; 353 354 vcc2v8_dvp: LDO_REG2 { 355 regulator-name = "vcc2v8_dvp"; 356 regulator-always-on; 357 regulator-boot-on; 358 regulator-min-microvolt = <2800000>; 359 regulator-max-microvolt = <2800000>; 360 regulator-state-mem { 361 regulator-off-in-suspend; 362 }; 363 }; 364 365 vcc1v8_pmu: LDO_REG3 { 366 regulator-name = "vcc1v8_pmu"; 367 regulator-always-on; 368 regulator-boot-on; 369 regulator-min-microvolt = <1800000>; 370 regulator-max-microvolt = <1800000>; 371 regulator-state-mem { 372 regulator-on-in-suspend; 373 regulator-suspend-microvolt = <1800000>; 374 }; 375 }; 376 377 vcc_sdio: LDO_REG4 { 378 regulator-name = "vcc_sdio"; 379 regulator-always-on; 380 regulator-boot-on; 381 regulator-min-microvolt = <1800000>; 382 regulator-max-microvolt = <3000000>; 383 regulator-state-mem { 384 regulator-on-in-suspend; 385 regulator-suspend-microvolt = <3000000>; 386 }; 387 }; 388 389 vcca3v0_codec: LDO_REG5 { 390 regulator-name = "vcca3v0_codec"; 391 regulator-always-on; 392 regulator-boot-on; 393 regulator-min-microvolt = <3000000>; 394 regulator-max-microvolt = <3000000>; 395 regulator-state-mem { 396 regulator-off-in-suspend; 397 }; 398 }; 399 400 vcc_1v5: LDO_REG6 { 401 regulator-name = "vcc_1v5"; 402 regulator-always-on; 403 regulator-boot-on; 404 regulator-min-microvolt = <1500000>; 405 regulator-max-microvolt = <1500000>; 406 regulator-state-mem { 407 regulator-on-in-suspend; 408 regulator-suspend-microvolt = <1500000>; 409 }; 410 }; 411 412 vcca1v8_codec: LDO_REG7 { 413 regulator-name = "vcca1v8_codec"; 414 regulator-always-on; 415 regulator-boot-on; 416 regulator-min-microvolt = <1800000>; 417 regulator-max-microvolt = <1800000>; 418 regulator-state-mem { 419 regulator-off-in-suspend; 420 }; 421 }; 422 423 vcc_3v0: LDO_REG8 { 424 regulator-name = "vcc_3v0"; 425 regulator-always-on; 426 regulator-boot-on; 427 regulator-min-microvolt = <3000000>; 428 regulator-max-microvolt = <3000000>; 429 regulator-state-mem { 430 regulator-on-in-suspend; 431 regulator-suspend-microvolt = <3000000>; 432 }; 433 }; 434 435 vcc3v3_s3: vcc_lan: SWITCH_REG1 { 436 regulator-name = "vcc3v3_s3"; 437 regulator-always-on; 438 regulator-boot-on; 439 regulator-state-mem { 440 regulator-off-in-suspend; 441 }; 442 }; 443 444 vcc3v3_s0: SWITCH_REG2 { 445 regulator-name = "vcc3v3_s0"; 446 regulator-always-on; 447 regulator-boot-on; 448 regulator-state-mem { 449 regulator-off-in-suspend; 450 }; 451 }; 452 }; 453 }; 454 455 vdd_cpu_b: regulator@40 { 456 compatible = "silergy,syr827"; 457 reg = <0x40>; 458 fcs,suspend-voltage-selector = <0>; 459 regulator-name = "vdd_cpu_b"; 460 regulator-min-microvolt = <712500>; 461 regulator-max-microvolt = <1500000>; 462 regulator-ramp-delay = <1000>; 463 regulator-always-on; 464 regulator-boot-on; 465 vin-supply = <&vcc_sys>; 466 467 regulator-state-mem { 468 regulator-off-in-suspend; 469 }; 470 }; 471 472 vdd_gpu: regulator@41 { 473 compatible = "silergy,syr828"; 474 reg = <0x41>; 475 fcs,suspend-voltage-selector = <1>; 476 regulator-name = "vdd_gpu"; 477 regulator-min-microvolt = <712500>; 478 regulator-max-microvolt = <1500000>; 479 regulator-ramp-delay = <1000>; 480 regulator-always-on; 481 regulator-boot-on; 482 vin-supply = <&vcc_sys>; 483 484 regulator-state-mem { 485 regulator-off-in-suspend; 486 }; 487 }; 488}; 489 490&i2c1 { 491 i2c-scl-rising-time-ns = <300>; 492 i2c-scl-falling-time-ns = <15>; 493 status = "okay"; 494 495 rt5640: rt5640@1c { 496 compatible = "realtek,rt5640"; 497 reg = <0x1c>; 498 clocks = <&cru SCLK_I2S_8CH_OUT>; 499 clock-names = "mclk"; 500 realtek,in1-differential; 501 #sound-dai-cells = <0>; 502 pinctrl-names = "default"; 503 pinctrl-0 = <&rt5640_hpcon>; 504 }; 505}; 506 507&i2c3 { 508 i2c-scl-rising-time-ns = <450>; 509 i2c-scl-falling-time-ns = <15>; 510 status = "okay"; 511}; 512 513&i2c4 { 514 i2c-scl-rising-time-ns = <600>; 515 i2c-scl-falling-time-ns = <20>; 516 status = "okay"; 517 518 accelerometer@68 { 519 compatible = "invensense,mpu6500"; 520 reg = <0x68>; 521 interrupt-parent = <&gpio1>; 522 interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; 523 }; 524}; 525 526&i2s0 { 527 rockchip,playback-channels = <8>; 528 rockchip,capture-channels = <8>; 529 status = "okay"; 530}; 531 532&i2s1 { 533 rockchip,playback-channels = <2>; 534 rockchip,capture-channels = <2>; 535 status = "okay"; 536}; 537 538&i2s2 { 539 status = "okay"; 540}; 541 542&io_domains { 543 status = "okay"; 544 545 bt656-supply = <&vcc1v8_dvp>; 546 audio-supply = <&vcca1v8_codec>; 547 sdmmc-supply = <&vcc_sdio>; 548 gpio1830-supply = <&vcc_3v0>; 549}; 550 551&pcie_phy { 552 status = "okay"; 553}; 554 555&pcie0 { 556 ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; 557 num-lanes = <4>; 558 pinctrl-names = "default"; 559 pinctrl-0 = <&pcie_clkreqn_cpm>; 560 status = "okay"; 561}; 562 563&pmu_io_domains { 564 pmu1830-supply = <&vcc_3v0>; 565 status = "okay"; 566}; 567 568&pinctrl { 569 buttons { 570 pwrbtn: pwrbtn { 571 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; 572 }; 573 }; 574 575 lcd-panel { 576 lcd_panel_reset: lcd-panel-reset { 577 rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; 578 }; 579 }; 580 581 pcie { 582 pcie_pwr_en: pcie-pwr-en { 583 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; 584 }; 585 586 pcie_3g_drv: pcie-3g-drv { 587 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; 588 }; 589 }; 590 591 pmic { 592 vsel1_pin: vsel1-pin { 593 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; 594 }; 595 596 vsel2_pin: vsel2-pin { 597 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; 598 }; 599 }; 600 601 sdio-pwrseq { 602 wifi_enable_h: wifi-enable-h { 603 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 604 }; 605 }; 606 607 rt5640 { 608 rt5640_hpcon: rt5640-hpcon { 609 rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; 610 }; 611 }; 612 613 pmic { 614 pmic_int_l: pmic-int-l { 615 rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; 616 }; 617 }; 618 619 usb2 { 620 vcc5v0_host_en: vcc5v0-host-en { 621 rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; 622 }; 623 }; 624 625 wifi { 626 wifi_host_wake_l: wifi-host-wake-l { 627 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; 628 }; 629 }; 630 631 leds { 632 work_led_pin: work-led-pin { 633 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 634 }; 635 636 diy_led_pin: diy-led-pin { 637 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; 638 }; 639 }; 640}; 641 642&pwm0 { 643 status = "okay"; 644}; 645 646&pwm2 { 647 status = "okay"; 648}; 649 650&saradc { 651 vref-supply = <&vcca1v8_s3>; 652 status = "okay"; 653}; 654 655&sdio0 { 656 /* WiFi & BT combo module Ampak AP6356S */ 657 bus-width = <4>; 658 cap-sdio-irq; 659 cap-sd-highspeed; 660 keep-power-in-suspend; 661 mmc-pwrseq = <&sdio_pwrseq>; 662 non-removable; 663 pinctrl-names = "default"; 664 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; 665 sd-uhs-sdr104; 666 667 /* Power supply */ 668 vqmmc-supply = &vcc1v8_s3; /* IO line */ 669 vmmc-supply = &vcc_sdio; /* card's power */ 670 671 #address-cells = <1>; 672 #size-cells = <0>; 673 status = "okay"; 674 675 brcmf: wifi@1 { 676 reg = <1>; 677 compatible = "brcm,bcm4329-fmac"; 678 interrupt-parent = <&gpio0>; 679 interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; 680 interrupt-names = "host-wake"; 681 brcm,drive-strength = <5>; 682 pinctrl-names = "default"; 683 pinctrl-0 = <&wifi_host_wake_l>; 684 }; 685}; 686 687&sdmmc { 688 bus-width = <4>; 689 cap-mmc-highspeed; 690 cap-sd-highspeed; 691 cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; 692 disable-wp; 693 max-frequency = <150000000>; 694 pinctrl-names = "default"; 695 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; 696 status = "okay"; 697}; 698 699&sdhci { 700 bus-width = <8>; 701 mmc-hs400-1_8v; 702 mmc-hs400-enhanced-strobe; 703 non-removable; 704 status = "okay"; 705}; 706 707&tcphy0 { 708 status = "okay"; 709}; 710 711&tcphy1 { 712 status = "okay"; 713}; 714 715&tsadc { 716 /* tshut mode 0:CRU 1:GPIO */ 717 rockchip,hw-tshut-mode = <1>; 718 /* tshut polarity 0:LOW 1:HIGH */ 719 rockchip,hw-tshut-polarity = <1>; 720 status = "okay"; 721}; 722 723&u2phy0 { 724 status = "okay"; 725 726 u2phy0_otg: otg-port { 727 status = "okay"; 728 }; 729 730 u2phy0_host: host-port { 731 phy-supply = <&vcc5v0_host>; 732 status = "okay"; 733 }; 734}; 735 736&u2phy1 { 737 status = "okay"; 738 739 u2phy1_otg: otg-port { 740 status = "okay"; 741 }; 742 743 u2phy1_host: host-port { 744 phy-supply = <&vcc5v0_host>; 745 status = "okay"; 746 }; 747}; 748 749&uart0 { 750 pinctrl-names = "default"; 751 pinctrl-0 = <&uart0_xfer &uart0_cts>; 752 status = "okay"; 753}; 754 755&uart2 { 756 status = "okay"; 757}; 758 759&usb_host0_ehci { 760 status = "okay"; 761}; 762 763&usb_host0_ohci { 764 status = "okay"; 765}; 766 767&usb_host1_ehci { 768 status = "okay"; 769}; 770 771&usb_host1_ohci { 772 status = "okay"; 773}; 774 775&usbdrd3_0 { 776 status = "okay"; 777}; 778 779&usbdrd_dwc3_0 { 780 status = "okay"; 781 dr_mode = "otg"; 782}; 783 784&usbdrd3_1 { 785 status = "okay"; 786}; 787 788&usbdrd_dwc3_1 { 789 status = "okay"; 790 dr_mode = "host"; 791}; 792 793&vopb { 794 status = "okay"; 795}; 796 797&vopb_mmu { 798 status = "okay"; 799}; 800 801&vopl { 802 status = "okay"; 803}; 804 805&vopl_mmu { 806 status = "okay"; 807}; 808