1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and 4 * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts 5 * 6 * Copyright (C) 2020 Renesas Electronics Corp. 7 */ 8 9#include <dt-bindings/gpio/gpio.h> 10#include "hihope-common.dtsi" 11 12/ { 13 audio_clkout: audio-clkout { 14 /* 15 * This is same as <&rcar_sound 0> 16 * but needed to avoid cs2000/rcar_sound probe dead-lock 17 */ 18 compatible = "fixed-clock"; 19 #clock-cells = <0>; 20 clock-frequency = <12288000>; 21 }; 22 23 wlan_en_reg: regulator-wlan_en { 24 compatible = "regulator-fixed"; 25 regulator-name = "wlan-en-regulator"; 26 regulator-min-microvolt = <1800000>; 27 regulator-max-microvolt = <1800000>; 28 startup-delay-us = <70000>; 29 30 gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; 31 enable-active-high; 32 }; 33 34 x1801_clk: x1801-clock { 35 compatible = "fixed-clock"; 36 #clock-cells = <0>; 37 clock-frequency = <24576000>; 38 }; 39}; 40 41&hscif0 { 42 bluetooth { 43 compatible = "ti,wl1837-st"; 44 enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; 45 }; 46}; 47 48&i2c2 { 49 pinctrl-0 = <&i2c2_pins>; 50 pinctrl-names = "default"; 51 status = "okay"; 52 53 cs2000: clk_multiplier@4f { 54 #clock-cells = <0>; 55 compatible = "cirrus,cs2000-cp"; 56 reg = <0x4f>; 57 clocks = <&audio_clkout>, <&x1801_clk>; 58 clock-names = "clk_in", "ref_clk"; 59 60 assigned-clocks = <&cs2000>; 61 assigned-clock-rates = <24576000>; /* 1/1 divide */ 62 }; 63}; 64 65&pfc { 66 i2c2_pins: i2c2 { 67 groups = "i2c2_a"; 68 function = "i2c2"; 69 }; 70 71 sound_clk_pins: sound_clk { 72 groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a"; 73 function = "audio_clk"; 74 }; 75 76 sound_pins: sound { 77 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; 78 function = "ssi"; 79 }; 80}; 81 82&rcar_sound { 83 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; 84 pinctrl-names = "default"; 85 status = "okay"; 86 87 /* Single DAI */ 88 #sound-dai-cells = <0>; 89 90 /* audio_clkout0/1/2/3 */ 91 #clock-cells = <1>; 92 clock-frequency = <12288000 11289600>; 93 94 /* 95 * Update <audio_clk_b> to <cs2000> 96 * Switch SW2404 should be at position 1 so that clock from 97 * CS2000 is connected to AUDIO_CLKB_A 98 */ 99 clocks = <&cpg CPG_MOD 1005>, 100 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, 101 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, 102 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, 103 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, 104 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, 105 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, 106 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, 107 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, 108 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, 109 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, 110 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, 111 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, 112 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, 113 <&audio_clk_a>, <&cs2000>, 114 <&audio_clk_c>, 115 <&cpg CPG_CORE CPG_AUDIO_CLK_I>; 116 117 rsnd_port: port { 118 rsnd_endpoint: endpoint { 119 remote-endpoint = <&dw_hdmi0_snd_in>; 120 121 dai-format = "i2s"; 122 bitclock-master = <&rsnd_endpoint>; 123 frame-master = <&rsnd_endpoint>; 124 125 playback = <&ssi2>; 126 }; 127 }; 128}; 129