1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and 4 * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts 5 * 6 * Copyright (C) 2019 Renesas Electronics Corp. 7 */ 8 9#include <dt-bindings/gpio/gpio.h> 10 11/ { 12 aliases { 13 serial0 = &scif2; 14 serial1 = &hscif0; 15 mmc0 = &sdhi3; 16 mmc1 = &sdhi0; 17 mmc2 = &sdhi2; 18 }; 19 20 chosen { 21 bootargs = "ignore_loglevel"; 22 stdout-path = "serial0:115200n8"; 23 }; 24 25 hdmi0-out { 26 compatible = "hdmi-connector"; 27 type = "a"; 28 29 port { 30 hdmi0_con: endpoint { 31 remote-endpoint = <&rcar_dw_hdmi0_out>; 32 }; 33 }; 34 }; 35 36 leds { 37 compatible = "gpio-leds"; 38 39 led1 { 40 gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; 41 }; 42 43 led2 { 44 gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; 45 }; 46 47 led3 { 48 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; 49 }; 50 51 led4 { 52 gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; 53 }; 54 }; 55 56 reg_1p8v: regulator0 { 57 compatible = "regulator-fixed"; 58 regulator-name = "fixed-1.8V"; 59 regulator-min-microvolt = <1800000>; 60 regulator-max-microvolt = <1800000>; 61 regulator-boot-on; 62 regulator-always-on; 63 }; 64 65 reg_3p3v: regulator1 { 66 compatible = "regulator-fixed"; 67 regulator-name = "fixed-3.3V"; 68 regulator-min-microvolt = <3300000>; 69 regulator-max-microvolt = <3300000>; 70 regulator-boot-on; 71 regulator-always-on; 72 }; 73 74 sound_card: sound { 75 compatible = "audio-graph-card"; 76 77 label = "rcar-sound"; 78 79 dais = <&rsnd_port>; 80 }; 81 82 vbus0_usb2: regulator-vbus0-usb2 { 83 compatible = "regulator-fixed"; 84 85 regulator-name = "USB20_VBUS0"; 86 regulator-min-microvolt = <5000000>; 87 regulator-max-microvolt = <5000000>; 88 89 gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; 90 enable-active-high; 91 }; 92 93 vccq_sdhi0: regulator-vccq-sdhi0 { 94 compatible = "regulator-gpio"; 95 96 regulator-name = "SDHI0 VccQ"; 97 regulator-min-microvolt = <1800000>; 98 regulator-max-microvolt = <3300000>; 99 100 gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; 101 gpios-states = <1>; 102 states = <3300000 1>, <1800000 0>; 103 }; 104 105 x302_clk: x302-clock { 106 compatible = "fixed-clock"; 107 #clock-cells = <0>; 108 clock-frequency = <33000000>; 109 }; 110 111 x304_clk: x304-clock { 112 compatible = "fixed-clock"; 113 #clock-cells = <0>; 114 clock-frequency = <25000000>; 115 }; 116}; 117 118&audio_clk_a { 119 clock-frequency = <22579200>; 120}; 121 122&du { 123 status = "okay"; 124}; 125 126&ehci0 { 127 status = "okay"; 128}; 129 130&ehci1 { 131 status = "okay"; 132}; 133 134&extal_clk { 135 clock-frequency = <16666666>; 136}; 137 138&extalr_clk { 139 clock-frequency = <32768>; 140}; 141 142&gpio6 { 143 usb1-reset { 144 gpio-hog; 145 gpios = <10 GPIO_ACTIVE_LOW>; 146 output-low; 147 line-name = "usb1-reset"; 148 }; 149}; 150 151&hdmi0 { 152 status = "okay"; 153 154 ports { 155 port@1 { 156 reg = <1>; 157 rcar_dw_hdmi0_out: endpoint { 158 remote-endpoint = <&hdmi0_con>; 159 }; 160 }; 161 port@2 { 162 reg = <2>; 163 dw_hdmi0_snd_in: endpoint { 164 remote-endpoint = <&rsnd_endpoint>; 165 }; 166 }; 167 }; 168}; 169 170&hscif0 { 171 pinctrl-0 = <&hscif0_pins>; 172 pinctrl-names = "default"; 173 174 uart-has-rtscts; 175 status = "okay"; 176}; 177 178&hsusb { 179 dr_mode = "otg"; 180 status = "okay"; 181}; 182 183&i2c4 { 184 clock-frequency = <400000>; 185 status = "okay"; 186 187 versaclock5: clock-generator@6a { 188 compatible = "idt,5p49v5923"; 189 reg = <0x6a>; 190 #clock-cells = <1>; 191 clocks = <&x304_clk>; 192 clock-names = "xin"; 193 }; 194}; 195 196&ohci0 { 197 status = "okay"; 198}; 199 200&ohci1 { 201 status = "okay"; 202}; 203 204&pcie_bus_clk { 205 clock-frequency = <100000000>; 206}; 207 208&pfc { 209 pinctrl-0 = <&scif_clk_pins>; 210 pinctrl-names = "default"; 211 212 hscif0_pins: hscif0 { 213 groups = "hscif0_data", "hscif0_ctrl"; 214 function = "hscif0"; 215 }; 216 217 scif2_pins: scif2 { 218 groups = "scif2_data_a"; 219 function = "scif2"; 220 }; 221 222 scif_clk_pins: scif_clk { 223 groups = "scif_clk_a"; 224 function = "scif_clk"; 225 }; 226 227 sdhi0_pins: sd0 { 228 groups = "sdhi0_data4", "sdhi0_ctrl"; 229 function = "sdhi0"; 230 power-source = <3300>; 231 }; 232 233 sdhi0_pins_uhs: sd0_uhs { 234 groups = "sdhi0_data4", "sdhi0_ctrl"; 235 function = "sdhi0"; 236 power-source = <1800>; 237 }; 238 239 sdhi2_pins: sd2 { 240 groups = "sdhi2_data4", "sdhi2_ctrl"; 241 function = "sdhi2"; 242 power-source = <1800>; 243 }; 244 245 sdhi3_pins: sd3 { 246 groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; 247 function = "sdhi3"; 248 power-source = <1800>; 249 }; 250 251 usb0_pins: usb0 { 252 groups = "usb0"; 253 function = "usb0"; 254 }; 255 256 usb1_pins: usb1 { 257 mux { 258 groups = "usb1"; 259 function = "usb1"; 260 }; 261 262 ovc { 263 pins = "GP_6_27"; 264 bias-pull-up; 265 }; 266 }; 267 268 usb30_pins: usb30 { 269 groups = "usb30"; 270 function = "usb30"; 271 }; 272}; 273 274&rwdt { 275 timeout-sec = <60>; 276 status = "okay"; 277}; 278 279&scif2 { 280 pinctrl-0 = <&scif2_pins>; 281 pinctrl-names = "default"; 282 283 status = "okay"; 284}; 285 286&scif_clk { 287 clock-frequency = <14745600>; 288}; 289 290&sdhi0 { 291 pinctrl-0 = <&sdhi0_pins>; 292 pinctrl-1 = <&sdhi0_pins_uhs>; 293 pinctrl-names = "default", "state_uhs"; 294 295 vmmc-supply = <®_3p3v>; 296 vqmmc-supply = <&vccq_sdhi0>; 297 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; 298 bus-width = <4>; 299 sd-uhs-sdr50; 300 sd-uhs-sdr104; 301 status = "okay"; 302}; 303 304&sdhi2 { 305 status = "okay"; 306 pinctrl-0 = <&sdhi2_pins>; 307 pinctrl-names = "default"; 308 309 vmmc-supply = <&wlan_en_reg>; 310 bus-width = <4>; 311 non-removable; 312 cap-power-off-card; 313 keep-power-in-suspend; 314 315 #address-cells = <1>; 316 #size-cells = <0>; 317 wlcore: wlcore@2 { 318 compatible = "ti,wl1837"; 319 reg = <2>; 320 interrupt-parent = <&gpio2>; 321 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; 322 }; 323}; 324 325&sdhi3 { 326 pinctrl-0 = <&sdhi3_pins>; 327 pinctrl-1 = <&sdhi3_pins>; 328 pinctrl-names = "default", "state_uhs"; 329 330 vmmc-supply = <®_3p3v>; 331 vqmmc-supply = <®_1p8v>; 332 bus-width = <8>; 333 mmc-hs200-1_8v; 334 no-sd; 335 no-sdio; 336 non-removable; 337 fixed-emmc-driver-type = <1>; 338 status = "okay"; 339}; 340 341&usb_extal_clk { 342 clock-frequency = <50000000>; 343}; 344 345&usb2_phy0 { 346 pinctrl-0 = <&usb0_pins>; 347 pinctrl-names = "default"; 348 349 vbus-supply = <&vbus0_usb2>; 350 status = "okay"; 351}; 352 353&usb2_phy1 { 354 pinctrl-0 = <&usb1_pins>; 355 pinctrl-names = "default"; 356 357 status = "okay"; 358}; 359 360&usb3_peri0 { 361 phys = <&usb3_phy0>; 362 phy-names = "usb"; 363 364 companion = <&xhci0>; 365 366 status = "okay"; 367}; 368 369&usb3_phy0 { 370 status = "okay"; 371}; 372 373&usb3s0_clk { 374 clock-frequency = <100000000>; 375}; 376 377&xhci0 { 378 pinctrl-0 = <&usb30_pins>; 379 pinctrl-names = "default"; 380 381 status = "okay"; 382}; 383