xref: /freebsd/sys/contrib/device-tree/src/arm64/renesas/beacon-renesom-som.dtsi (revision c66ec88fed842fbaad62c30d510644ceb7bd2d71) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2020, Compass Electronics Group, LLC
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7
8/ {
9	memory@48000000 {
10		device_type = "memory";
11		/* first 128MB is reserved for secure area. */
12		reg = <0x0 0x48000000 0x0 0x78000000>;
13	};
14
15	memory@600000000 {
16		device_type = "memory";
17		reg = <0x6 0x00000000 0x0 0x80000000>;
18	};
19
20	osc_32k: osc_32k {
21		compatible = "fixed-clock";
22		#clock-cells = <0>;
23		clock-frequency = <32768>;
24		clock-output-names = "osc_32k";
25	};
26
27	reg_1p8v: regulator0 {
28		compatible = "regulator-fixed";
29		regulator-name = "fixed-1.8V";
30		regulator-min-microvolt = <1800000>;
31		regulator-max-microvolt = <1800000>;
32		regulator-boot-on;
33		regulator-always-on;
34	};
35
36	reg_3p3v: regulator1 {
37		compatible = "regulator-fixed";
38		regulator-name = "fixed-3.3V";
39		regulator-min-microvolt = <3300000>;
40		regulator-max-microvolt = <3300000>;
41		regulator-boot-on;
42		regulator-always-on;
43	};
44
45	wlan_pwrseq: wlan_pwrseq {
46		compatible = "mmc-pwrseq-simple";
47		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
48		clocks = <&osc_32k>;
49		clock-names = "ext_clock";
50		post-power-on-delay-ms = <80>;
51	};
52};
53
54&avb {
55	pinctrl-0 = <&avb_pins>;
56	pinctrl-names = "default";
57	phy-handle = <&phy0>;
58	phy-mode = "rgmii-id";
59	status = "okay";
60
61	phy0: ethernet-phy@0 {
62		reg = <0>;
63		interrupt-parent = <&gpio2>;
64		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
65		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
66	};
67};
68
69&extal_clk {
70	clock-frequency = <16666666>;
71};
72
73&extalr_clk {
74	clock-frequency = <32768>;
75};
76
77&gpio6 {
78	usb_hub_reset {
79		gpio-hog;
80		gpios = <10 GPIO_ACTIVE_HIGH>;
81		output-high;
82		line-name = "usb-hub-reset";
83	};
84};
85
86&hscif0 {
87	pinctrl-0 = <&hscif0_pins>;
88	pinctrl-names = "default";
89	uart-has-rtscts;
90	status = "okay";
91	max-speed = <4000000>;
92
93	bluetooth {
94		compatible = "brcm,bcm43438-bt";
95		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
96		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
97		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
98		clocks = <&osc_32k>;
99		clock-names = "extclk";
100	};
101};
102
103&hscif2 {
104	status = "okay";
105	pinctrl-0 = <&hscif2_pins>;
106	pinctrl-names = "default";
107};
108
109&i2c4 {
110	status = "okay";
111	clock-frequency = <400000>;
112
113	pca9654: gpio@20 {
114		compatible = "onnn,pca9654";
115		reg = <0x20>;
116		gpio-controller;
117		#gpio-cells = <2>;
118		gpio-line-names =
119			"i2c4_20_0",
120			"wl_reg_on",
121			"bt_reg_on",
122			"i2c4_20_3",
123			"i2c4_20_4",
124			"bt_dev_wake",
125			"i2c4_20_6",
126			"i2c4_20_7";
127	};
128
129	pca9654_lte: gpio@21 {
130		compatible = "onnn,pca9654";
131		reg = <0x21>;
132		interrupt-parent = <&gpio5>;
133		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
134		interrupt-controller;
135		#interrupt-cells = <2>;
136		gpio-controller;
137		#gpio-cells = <2>;
138		gpio-line-names =
139			"i2c4_21_0",
140			"zoe_pwr_on",
141			"zoe_extint",
142			"zoe_reset_n",
143			"sara_reset",
144			"i2c4_21_5",
145			"sara_pwr_off",
146			"sara_networking_status";
147	};
148
149	eeprom@50 {
150		compatible = "microchip,at24c64", "atmel,24c64";
151		pagesize = <32>;
152		read-only;	/* Manufacturing EEPROM programmed at factory */
153		reg = <0x50>;
154	};
155
156	rtc@51 {
157		compatible = "nxp,pcf85263";
158		reg = <0x51>;
159	};
160
161	versaclock5: versaclock_som@6a {
162		compatible = "idt,5p49v6965";
163		reg = <0x6a>;
164		#clock-cells = <1>;
165		clocks = <&x304_clk>;
166		clock-names = "xin";
167		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
168		assigned-clocks = <&versaclock5 1>,
169				   <&versaclock5 2>,
170				   <&versaclock5 3>,
171				   <&versaclock5 4>;
172		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
173	};
174};
175
176&pfc {
177	pinctrl-0 = <&scif_clk_pins>;
178	pinctrl-names = "default";
179
180	avb_pins: avb {
181		mux {
182			groups = "avb_link", "avb_mdio", "avb_mii";
183			function = "avb";
184		};
185
186		pins_mdio {
187			groups = "avb_mdio";
188			drive-strength = <24>;
189		};
190
191		pins_mii_tx {
192			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
193			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
194			drive-strength = <12>;
195		};
196	};
197
198	scif2_pins: scif2 {
199		groups = "scif2_data_a";
200		function = "scif2";
201	};
202
203	hscif0_pins: hscif0 {
204		groups = "hscif0_data", "hscif0_ctrl";
205		function = "hscif0";
206	};
207
208	hscif1_pins: hscif1 {
209		groups = "hscif1_data_a", "hscif1_ctrl_a";
210		function = "hscif1";
211	};
212
213	hscif2_pins: hscif2 {
214		groups = "hscif2_data_a";
215		function = "hscif2";
216	};
217
218	scif0_pins: scif0 {
219		groups = "scif0_data";
220		function = "scif0";
221	};
222
223	scif5_pins: scif5 {
224		groups = "scif5_data_a";
225		function = "scif5";
226	};
227
228	scif_clk_pins: scif_clk {
229		groups = "scif_clk_a";
230		function = "scif_clk";
231	};
232
233	i2c0_pins: i2c0 {
234		groups = "i2c0";
235		function = "i2c0";
236	};
237
238	sdhi2_pins: sd2 {
239		groups = "sdhi2_data4", "sdhi2_ctrl";
240		function = "sdhi2";
241		power-source = <1800>;
242	};
243
244	sdhi3_pins: sd3 {
245		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
246		function = "sdhi3";
247		power-source = <1800>;
248	};
249};
250
251&scif_clk {
252	clock-frequency = <14745600>;
253};
254
255&scif2 {
256	pinctrl-0 = <&scif2_pins>;
257	pinctrl-names = "default";
258	status = "okay";
259};
260
261&sdhi2 {
262	pinctrl-names = "default";
263	pinctrl-0 = <&sdhi2_pins>;
264	bus-width = <4>;
265	vmmc-supply = <&reg_3p3v>;
266	vqmmc-supply = <&reg_1p8v>;
267	non-removable;
268	cap-power-off-card;
269	pm-ignore-notify;
270	keep-power-in-suspend;
271	mmc-pwrseq = <&wlan_pwrseq>;
272	status = "okay";
273	#address-cells = <1>;
274	#size-cells = <0>;
275
276	brcmf: bcrmf@1 {
277		reg = <1>;
278		compatible = "brcm,bcm4329-fmac";
279		interrupt-parent = <&gpio1>;
280		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
281		interrupt-names = "host-wake";
282	};
283};
284
285&sdhi3 {
286	pinctrl-0 = <&sdhi3_pins>;
287	pinctrl-1 = <&sdhi3_pins>;
288	pinctrl-names = "default", "state_uhs";
289	vmmc-supply = <&reg_3p3v>;
290	vqmmc-supply = <&reg_1p8v>;
291	bus-width = <8>;
292	mmc-hs200-1_8v;
293	non-removable;
294	fixed-emmc-driver-type = <1>;
295	status = "okay";
296};
297
298&usb_extal_clk {
299	clock-frequency = <50000000>;
300};
301
302&usb3s0_clk {
303	clock-frequency = <100000000>;
304};
305
306&vspb {
307	status = "okay";
308};
309
310&vspi0 {
311	status = "okay";
312};
313