1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> 10#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> 11#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> 12#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> 13#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> 14#include "sm8450.dtsi" 15#include "pm8350.dtsi" 16#include "pm8350b.dtsi" 17#include "pm8350c.dtsi" 18#include "pm8450.dtsi" 19#include "pmk8350.dtsi" 20#include "pmr735a.dtsi" 21 22/ { 23 model = "Qualcomm Technologies, Inc. SM8450 HDK"; 24 compatible = "qcom,sm8450-hdk", "qcom,sm8450"; 25 chassis-type = "embedded"; 26 27 aliases { 28 serial0 = &uart7; 29 }; 30 31 wcd938x: audio-codec { 32 compatible = "qcom,wcd9385-codec"; 33 34 pinctrl-names = "default"; 35 pinctrl-0 = <&wcd_default>; 36 37 qcom,micbias1-microvolt = <1800000>; 38 qcom,micbias2-microvolt = <1800000>; 39 qcom,micbias3-microvolt = <1800000>; 40 qcom,micbias4-microvolt = <1800000>; 41 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 42 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 43 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 44 qcom,rx-device = <&wcd_rx>; 45 qcom,tx-device = <&wcd_tx>; 46 47 reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; 48 49 vdd-buck-supply = <&vreg_s10b_1p8>; 50 vdd-rxtx-supply = <&vreg_s10b_1p8>; 51 vdd-io-supply = <&vreg_s10b_1p8>; 52 vdd-mic-bias-supply = <&vreg_bob>; 53 54 #sound-dai-cells = <1>; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 hdmi-out { 62 compatible = "hdmi-connector"; 63 type = "a"; 64 65 port { 66 hdmi_connector_out: endpoint { 67 remote-endpoint = <<9611_out>; 68 }; 69 }; 70 }; 71 72 lt9611_1v2: lt9611-vdd12-regulator { 73 compatible = "regulator-fixed"; 74 regulator-name = "LT9611_1V2"; 75 76 vin-supply = <&vph_pwr>; 77 regulator-min-microvolt = <1200000>; 78 regulator-max-microvolt = <1200000>; 79 gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; 80 enable-active-high; 81 }; 82 83 lt9611_3v3: lt9611-3v3-regulator { 84 compatible = "regulator-fixed"; 85 regulator-name = "LT9611_3V3"; 86 87 vin-supply = <&vreg_bob>; 88 gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>; 89 regulator-min-microvolt = <3300000>; 90 regulator-max-microvolt = <3300000>; 91 enable-active-high; 92 }; 93 94 pmic-glink { 95 compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 99 connector@0 { 100 compatible = "usb-c-connector"; 101 reg = <0>; 102 power-role = "dual"; 103 data-role = "dual"; 104 105 ports { 106 #address-cells = <1>; 107 #size-cells = <0>; 108 109 port@0 { 110 reg = <0>; 111 112 pmic_glink_hs_in: endpoint { 113 remote-endpoint = <&usb_1_dwc3_hs>; 114 }; 115 }; 116 117 port@1 { 118 reg = <1>; 119 120 pmic_glink_ss_in: endpoint { 121 remote-endpoint = <&usb_1_qmpphy_out>; 122 }; 123 }; 124 125 port@2 { 126 reg = <2>; 127 128 pmic_glink_sbu: endpoint { 129 remote-endpoint = <&fsa4480_sbu_mux>; 130 }; 131 }; 132 133 }; 134 }; 135 }; 136 137 thermal-zones { 138 camera-thermal { 139 polling-delay-passive = <250>; 140 polling-delay = <0>; 141 thermal-sensors = <&pmk8350_adc_tm 2>; 142 143 trips { 144 active-config0 { 145 temperature = <75000>; 146 hysteresis = <4000>; 147 type = "passive"; 148 }; 149 }; 150 }; 151 152 rear-tof-thermal { 153 polling-delay-passive = <250>; 154 polling-delay = <0>; 155 thermal-sensors = <&pmk8350_adc_tm 5>; 156 157 trips { 158 active-config0 { 159 temperature = <75000>; 160 hysteresis = <4000>; 161 type = "passive"; 162 }; 163 }; 164 }; 165 166 skin-msm-thermal { 167 polling-delay-passive = <250>; 168 polling-delay = <0>; 169 thermal-sensors = <&pmk8350_adc_tm 1>; 170 171 trips { 172 active-config0 { 173 temperature = <75000>; 174 hysteresis = <4000>; 175 type = "passive"; 176 }; 177 }; 178 }; 179 180 therm1-thermal { 181 polling-delay-passive = <250>; 182 polling-delay = <0>; 183 thermal-sensors = <&pmk8350_adc_tm 3>; 184 185 trips { 186 active-config0 { 187 temperature = <75000>; 188 hysteresis = <4000>; 189 type = "passive"; 190 }; 191 }; 192 }; 193 194 therm2-thermal { 195 polling-delay-passive = <250>; 196 polling-delay = <0>; 197 thermal-sensors = <&pmk8350_adc_tm 6>; 198 199 trips { 200 active-config0 { 201 temperature = <75000>; 202 hysteresis = <4000>; 203 type = "passive"; 204 }; 205 }; 206 }; 207 208 usb-conn-thermal { 209 polling-delay-passive = <250>; 210 polling-delay = <0>; 211 thermal-sensors = <&pmk8350_adc_tm 7>; 212 213 trips { 214 active-config0 { 215 temperature = <75000>; 216 hysteresis = <4000>; 217 type = "passive"; 218 }; 219 }; 220 }; 221 222 wide-rfc-thermal { 223 polling-delay-passive = <250>; 224 polling-delay = <0>; 225 thermal-sensors = <&pmk8350_adc_tm 4>; 226 227 trips { 228 active-config0 { 229 temperature = <75000>; 230 hysteresis = <4000>; 231 type = "passive"; 232 }; 233 }; 234 }; 235 236 xo-thermal { 237 polling-delay-passive = <0>; 238 polling-delay = <0>; 239 thermal-sensors = <&pmk8350_adc_tm 0>; 240 241 trips { 242 active-config0 { 243 temperature = <50000>; 244 hysteresis = <4000>; 245 type = "passive"; 246 }; 247 }; 248 }; 249 }; 250 251 vph_pwr: vph-pwr-regulator { 252 compatible = "regulator-fixed"; 253 regulator-name = "vph_pwr"; 254 regulator-min-microvolt = <3700000>; 255 regulator-max-microvolt = <3700000>; 256 257 regulator-always-on; 258 regulator-boot-on; 259 }; 260}; 261 262&apps_rsc { 263 regulators-0 { 264 compatible = "qcom,pm8350-rpmh-regulators"; 265 qcom,pmic-id = "b"; 266 267 vdd-s1-supply = <&vph_pwr>; 268 vdd-s2-supply = <&vph_pwr>; 269 vdd-s3-supply = <&vph_pwr>; 270 vdd-s4-supply = <&vph_pwr>; 271 vdd-s5-supply = <&vph_pwr>; 272 vdd-s6-supply = <&vph_pwr>; 273 vdd-s7-supply = <&vph_pwr>; 274 vdd-s8-supply = <&vph_pwr>; 275 vdd-s9-supply = <&vph_pwr>; 276 vdd-s10-supply = <&vph_pwr>; 277 vdd-s11-supply = <&vph_pwr>; 278 vdd-s12-supply = <&vph_pwr>; 279 280 vdd-l1-l4-supply = <&vreg_s11b_0p95>; 281 vdd-l2-l7-supply = <&vreg_bob>; 282 vdd-l3-l5-supply = <&vreg_bob>; 283 vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; 284 vdd-l8-supply = <&vreg_s2h_0p95>; 285 286 vreg_s10b_1p8: smps10 { 287 regulator-name = "vreg_s10b_1p8"; 288 regulator-min-microvolt = <1800000>; 289 regulator-max-microvolt = <1800000>; 290 }; 291 292 vreg_s11b_0p95: smps11 { 293 regulator-name = "vreg_s11b_0p95"; 294 regulator-min-microvolt = <966000>; 295 regulator-max-microvolt = <1104000>; 296 }; 297 298 vreg_s12b_1p25: smps12 { 299 regulator-name = "vreg_s12b_1p25"; 300 regulator-min-microvolt = <1350000>; 301 regulator-max-microvolt = <1400000>; 302 }; 303 304 vreg_l1b_0p91: ldo1 { 305 regulator-name = "vreg_l1b_0p91"; 306 regulator-min-microvolt = <912000>; 307 regulator-max-microvolt = <920000>; 308 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 309 }; 310 311 vreg_l2b_3p07: ldo2 { 312 regulator-name = "vreg_l2b_3p07"; 313 regulator-min-microvolt = <3072000>; 314 regulator-max-microvolt = <3072000>; 315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 316 }; 317 318 vreg_l3b_0p9: ldo3 { 319 regulator-name = "vreg_l3b_0p9"; 320 regulator-min-microvolt = <904000>; 321 regulator-max-microvolt = <904000>; 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 323 }; 324 325 vreg_l5b_0p88: ldo5 { 326 regulator-name = "vreg_l5b_0p88"; 327 regulator-min-microvolt = <880000>; 328 regulator-max-microvolt = <888000>; 329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 330 }; 331 332 vreg_l6b_1p2: ldo6 { 333 regulator-name = "vreg_l6b_1p2"; 334 regulator-min-microvolt = <1200000>; 335 regulator-max-microvolt = <1200000>; 336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 337 }; 338 339 vreg_l7b_2p5: ldo7 { 340 regulator-name = "vreg_l7b_2p5"; 341 regulator-min-microvolt = <2504000>; 342 regulator-max-microvolt = <2504000>; 343 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 344 }; 345 346 vreg_l9b_1p2: ldo9 { 347 regulator-name = "vreg_l9b_1p2"; 348 regulator-min-microvolt = <1200000>; 349 regulator-max-microvolt = <1200000>; 350 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 351 }; 352 }; 353 354 regulators-1 { 355 compatible = "qcom,pm8350c-rpmh-regulators"; 356 qcom,pmic-id = "c"; 357 358 vdd-s1-supply = <&vph_pwr>; 359 vdd-s2-supply = <&vph_pwr>; 360 vdd-s3-supply = <&vph_pwr>; 361 vdd-s4-supply = <&vph_pwr>; 362 vdd-s5-supply = <&vph_pwr>; 363 vdd-s6-supply = <&vph_pwr>; 364 vdd-s7-supply = <&vph_pwr>; 365 vdd-s8-supply = <&vph_pwr>; 366 vdd-s9-supply = <&vph_pwr>; 367 vdd-s10-supply = <&vph_pwr>; 368 369 vdd-l1-l12-supply = <&vreg_bob>; 370 vdd-l2-l8-supply = <&vreg_bob>; 371 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; 372 vdd-l6-l9-l11-supply = <&vreg_bob>; 373 vdd-l10-supply = <&vreg_s12b_1p25>; 374 375 vdd-bob-supply = <&vph_pwr>; 376 377 vreg_s1c_1p86: smps1 { 378 regulator-name = "vreg_s1c_1p86"; 379 regulator-min-microvolt = <1800000>; 380 regulator-max-microvolt = <2024000>; 381 }; 382 383 vreg_s10c_1p05: smps10 { 384 regulator-name = "vreg_s10c_1p05"; 385 regulator-min-microvolt = <1000000>; 386 regulator-max-microvolt = <1100000>; 387 }; 388 389 vreg_bob: bob { 390 regulator-name = "vreg_bob"; 391 regulator-min-microvolt = <3008000>; 392 regulator-max-microvolt = <3960000>; 393 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 394 }; 395 396 vreg_l1c_1p8: ldo1 { 397 regulator-name = "vreg_l1c_1p8"; 398 regulator-min-microvolt = <1800000>; 399 regulator-max-microvolt = <1800000>; 400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 401 }; 402 403 vreg_l3c_3p0: ldo3 { 404 regulator-name = "vreg_l3c_3p0"; 405 regulator-min-microvolt = <3296000>; 406 regulator-max-microvolt = <3304000>; 407 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 408 }; 409 410 vreg_l4c_1p8: ldo4 { 411 regulator-name = "vreg_l4c_1p8"; 412 regulator-min-microvolt = <1704000>; 413 regulator-max-microvolt = <3000000>; 414 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 415 }; 416 417 vreg_l5c_1p8: ldo5 { 418 regulator-name = "vreg_l5c_1p8"; 419 regulator-min-microvolt = <1704000>; 420 regulator-max-microvolt = <3000000>; 421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 422 }; 423 424 vreg_l6c_1p8: ldo6 { 425 regulator-name = "vreg_l6c_1p8"; 426 regulator-min-microvolt = <1800000>; 427 regulator-max-microvolt = <3008000>; 428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 429 }; 430 431 vreg_l7c_3p0: ldo7 { 432 regulator-name = "vreg_l7c_3p0"; 433 regulator-min-microvolt = <3008000>; 434 regulator-max-microvolt = <3008000>; 435 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 436 }; 437 438 vreg_l8c_1p8: ldo8 { 439 regulator-name = "vreg_l8c_1p8"; 440 regulator-min-microvolt = <1800000>; 441 regulator-max-microvolt = <1800000>; 442 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 443 }; 444 445 vreg_l9c_2p96: ldo9 { 446 regulator-name = "vreg_l9c_2p96"; 447 regulator-min-microvolt = <2960000>; 448 regulator-max-microvolt = <3008000>; 449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 450 }; 451 452 vreg_l12c_1p8: ldo12 { 453 regulator-name = "vreg_l12c_1p8"; 454 regulator-min-microvolt = <1800000>; 455 regulator-max-microvolt = <1968000>; 456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 457 }; 458 459 vreg_l13c_3p0: ldo13 { 460 regulator-name = "vreg_l13c_3p0"; 461 regulator-min-microvolt = <3000000>; 462 regulator-max-microvolt = <3000000>; 463 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 464 }; 465 }; 466 467 regulators-2 { 468 compatible = "qcom,pm8450-rpmh-regulators"; 469 qcom,pmic-id = "h"; 470 471 vdd-s1-supply = <&vph_pwr>; 472 vdd-s2-supply = <&vph_pwr>; 473 vdd-s3-supply = <&vph_pwr>; 474 vdd-s4-supply = <&vph_pwr>; 475 vdd-s5-supply = <&vph_pwr>; 476 vdd-s6-supply = <&vph_pwr>; 477 478 vdd-l2-supply = <&vreg_bob>; 479 vdd-l3-supply = <&vreg_bob>; 480 vdd-l4-supply = <&vreg_bob>; 481 482 vreg_s2h_0p95: smps2 { 483 regulator-name = "vreg_s2h_0p95"; 484 regulator-min-microvolt = <848000>; 485 regulator-max-microvolt = <1104000>; 486 }; 487 488 vreg_s3h_0p5: smps3 { 489 regulator-name = "vreg_s3h_0p5"; 490 regulator-min-microvolt = <500000>; 491 regulator-max-microvolt = <500000>; 492 }; 493 494 vreg_l2h_0p91: ldo2 { 495 regulator-name = "vreg_l2h_0p91"; 496 regulator-min-microvolt = <880000>; 497 regulator-max-microvolt = <912000>; 498 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 499 }; 500 501 vreg_l3h_0p91: ldo3 { 502 regulator-name = "vreg_l3h_0p91"; 503 regulator-min-microvolt = <912000>; 504 regulator-max-microvolt = <912000>; 505 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 506 }; 507 }; 508 509 regulators-3 { 510 compatible = "qcom,pmr735a-rpmh-regulators"; 511 qcom,pmic-id = "e"; 512 513 vdd-s1-supply = <&vph_pwr>; 514 vdd-s2-supply = <&vph_pwr>; 515 vdd-s3-supply = <&vph_pwr>; 516 517 vdd-l1-l2-supply = <&vreg_s2e_0p85>; 518 vdd-l3-supply = <&vreg_s1e_1p25>; 519 vdd-l4-supply = <&vreg_s1c_1p86>; 520 vdd-l5-l6-supply = <&vreg_s1c_1p86>; 521 vdd-l7-bob-supply = <&vreg_bob>; 522 523 vreg_s1e_1p25: smps1 { 524 regulator-name = "vreg_s1e_1p25"; 525 regulator-min-microvolt = <1200000>; 526 regulator-max-microvolt = <1296000>; 527 }; 528 529 vreg_s2e_0p85: smps2 { 530 regulator-name = "vreg_s2e_0p85"; 531 regulator-min-microvolt = <500000>; 532 regulator-max-microvolt = <1040000>; 533 }; 534 535 vreg_l1e_0p8: ldo1 { 536 regulator-name = "vreg_l1e_0p8"; 537 regulator-min-microvolt = <800000>; 538 regulator-max-microvolt = <800000>; 539 }; 540 541 vreg_l2e_0p8: ldo2 { 542 regulator-name = "vreg_l2e_0p8"; 543 regulator-min-microvolt = <800000>; 544 regulator-max-microvolt = <800000>; 545 }; 546 547 vreg_l3e_1p2: ldo3 { 548 regulator-name = "vreg_l3e_1p2"; 549 regulator-min-microvolt = <1200000>; 550 regulator-max-microvolt = <1200000>; 551 }; 552 553 vreg_l4e_1p7: ldo4 { 554 regulator-name = "vreg_l4e_1p7"; 555 regulator-min-microvolt = <1776000>; 556 regulator-max-microvolt = <1776000>; 557 }; 558 559 vreg_l5e_0p88: ldo5 { 560 regulator-name = "vreg_l5e_0p88"; 561 regulator-min-microvolt = <880000>; 562 regulator-max-microvolt = <880000>; 563 }; 564 565 vreg_l6e_1p2: ldo6 { 566 regulator-name = "vreg_l6e_1p2"; 567 regulator-min-microvolt = <1200000>; 568 regulator-max-microvolt = <1200000>; 569 }; 570 571 vreg_l7e_2p8: ldo7 { 572 regulator-name = "vreg_l7e_2p8"; 573 regulator-min-microvolt = <2800000>; 574 regulator-max-microvolt = <2800000>; 575 }; 576 }; 577}; 578 579&dispcc { 580 status = "okay"; 581}; 582 583&i2c9 { 584 clock-frequency = <400000>; 585 status = "okay"; 586 587 lt9611_codec: hdmi-bridge@2b { 588 compatible = "lontium,lt9611uxc"; 589 reg = <0x2b>; 590 591 interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>; 592 593 reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; 594 595 vdd-supply = <<9611_1v2>; 596 vcc-supply = <<9611_3v3>; 597 598 pinctrl-names = "default"; 599 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; 600 601 ports { 602 #address-cells = <1>; 603 #size-cells = <0>; 604 605 port@0 { 606 reg = <0>; 607 608 lt9611_a: endpoint { 609 remote-endpoint = <&mdss_dsi0_out>; 610 }; 611 }; 612 613 port@2 { 614 reg = <2>; 615 616 lt9611_out: endpoint { 617 remote-endpoint = <&hdmi_connector_out>; 618 }; 619 }; 620 }; 621 }; 622}; 623 624&i2c5 { 625 clock-frequency = <100000>; 626 627 status = "okay"; 628 629 typec-mux@42 { 630 compatible = "fcs,fsa4480"; 631 reg = <0x42>; 632 633 interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; 634 635 vcc-supply = <&vreg_bob>; 636 mode-switch; 637 orientation-switch; 638 639 port { 640 fsa4480_sbu_mux: endpoint { 641 remote-endpoint = <&pmic_glink_sbu>; 642 }; 643 }; 644 }; 645}; 646 647&mdss { 648 status = "okay"; 649}; 650 651&mdss_dsi0 { 652 vdda-supply = <&vreg_l6b_1p2>; 653 status = "okay"; 654}; 655 656&mdss_dsi0_out { 657 remote-endpoint = <<9611_a>; 658 data-lanes = <0 1 2 3>; 659}; 660 661&mdss_dsi0_phy { 662 vdds-supply = <&vreg_l5b_0p88>; 663 status = "okay"; 664}; 665 666&mdss_dp0 { 667 status = "okay"; 668 669 ports { 670 port@1 { 671 reg = <1>; 672 673 mdss_dp0_out: endpoint { 674 data-lanes = <0 1>; 675 remote-endpoint = <&usb_1_qmpphy_dp_in>; 676 }; 677 }; 678 }; 679}; 680 681&pcie0 { 682 status = "okay"; 683 max-link-speed = <2>; 684}; 685 686&pcie0_phy { 687 status = "okay"; 688 vdda-phy-supply = <&vreg_l5b_0p88>; 689 vdda-pll-supply = <&vreg_l6b_1p2>; 690}; 691 692&pcie1 { 693 status = "okay"; 694}; 695 696&pcie1_phy { 697 status = "okay"; 698 vdda-phy-supply = <&vreg_l2h_0p91>; 699 vdda-pll-supply = <&vreg_l6b_1p2>; 700}; 701 702&pm8350_temp_alarm { 703 io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP(1)>; 704 io-channel-names = "thermal"; 705}; 706 707&pm8350b_temp_alarm { 708 io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>; 709 io-channel-names = "thermal"; 710}; 711 712&pmr735a_temp_alarm { 713 io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>; 714 io-channel-names = "thermal"; 715}; 716 717&pmk8350_adc_tm { 718 status = "okay"; 719 720 xo-therm@0 { 721 reg = <0>; 722 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; 723 qcom,ratiometric; 724 qcom,hw-settle-time-us = <200>; 725 }; 726 727 skin-msm-therm@1 { 728 reg = <1>; 729 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 730 qcom,ratiometric; 731 qcom,hw-settle-time-us = <200>; 732 }; 733 734 camera-therm@2 { 735 reg = <2>; 736 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 737 qcom,ratiometric; 738 qcom,hw-settle-time-us = <200>; 739 }; 740 741 therm1-therm@3 { 742 reg = <3>; 743 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 744 qcom,ratiometric; 745 qcom,hw-settle-time-us = <200>; 746 }; 747 748 wide-rfc-therm@4 { 749 reg = <4>; 750 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 751 qcom,ratiometric; 752 qcom,hw-settle-time-us = <200>; 753 }; 754 755 rear-tof-therm@5 { 756 reg = <5>; 757 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 758 qcom,ratiometric; 759 qcom,hw-settle-time-us = <200>; 760 }; 761 762 therm2-therm@6 { 763 reg = <6>; 764 io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>; 765 qcom,ratiometric; 766 qcom,hw-settle-time-us = <200>; 767 }; 768 769 usb-conn-therm@7 { 770 reg = <7>; 771 io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM5_100K_PU>; 772 qcom,ratiometric; 773 qcom,hw-settle-time-us = <200>; 774 }; 775}; 776 777&pmk8350_vadc { 778 status = "okay"; 779 780 channel@3 { 781 reg = <PMK8350_ADC7_DIE_TEMP>; 782 label = "pmk8350_die_temp"; 783 }; 784 785 channel@44 { 786 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; 787 qcom,hw-settle-time = <200>; 788 qcom,ratiometric; 789 label = "pmk8350_xo_therm"; 790 }; 791 792 channel@103 { 793 reg = <PM8350_ADC7_DIE_TEMP(1)>; 794 label = "pm8350_die_temp"; 795 }; 796 797 channel@144 { 798 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 799 qcom,hw-settle-time = <200>; 800 qcom,ratiometric; 801 label = "skin_msm_temp"; 802 }; 803 804 channel@145 { 805 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 806 qcom,hw-settle-time = <200>; 807 qcom,ratiometric; 808 label = "camera_temp"; 809 }; 810 811 channel@146 { 812 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 813 qcom,hw-settle-time = <200>; 814 qcom,ratiometric; 815 label = "therm1_temp"; 816 }; 817 818 channel@147 { 819 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 820 qcom,hw-settle-time = <200>; 821 qcom,ratiometric; 822 label = "wide_rfc_temp"; 823 }; 824 825 channel@148 { 826 reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 827 qcom,hw-settle-time = <200>; 828 qcom,ratiometric; 829 label = "rear_tof_temp"; 830 }; 831 832 channel@14c { 833 reg = <PM8350_ADC7_GPIO3_100K_PU(1)>; 834 qcom,hw-settle-time = <200>; 835 qcom,ratiometric; 836 label = "therm2_temp"; 837 }; 838 839 channel@303 { 840 reg = <PM8350B_ADC7_DIE_TEMP>; 841 label = "pm8350b_die_temp"; 842 }; 843 844 channel@348 { 845 reg = <PM8350B_ADC7_AMUX_THM5_100K_PU>; 846 qcom,hw-settle-time = <200>; 847 qcom,ratiometric; 848 label = "usb_conn_temp"; 849 }; 850 851 channel@403 { 852 reg = <PMR735A_ADC7_DIE_TEMP>; 853 label = "pmr735a_die_temp"; 854 }; 855 856 channel@44a { 857 reg = <PMR735A_ADC7_GPIO1_100K_PU>; 858 qcom,hw-settle-time = <200>; 859 qcom,ratiometric; 860 label = "qtm_w_temp"; 861 }; 862 863 channel@44b { 864 reg = <PMR735A_ADC7_GPIO2_100K_PU>; 865 qcom,hw-settle-time = <200>; 866 qcom,ratiometric; 867 label = "qtm_n_temp"; 868 }; 869}; 870 871&remoteproc_adsp { 872 status = "okay"; 873 firmware-name = "qcom/sm8450/adsp.mbn"; 874}; 875 876&remoteproc_cdsp { 877 status = "okay"; 878 firmware-name = "qcom/sm8450/cdsp.mbn"; 879}; 880 881&remoteproc_mpss { 882 status = "okay"; 883 firmware-name = "qcom/sm8450/modem.mbn"; 884}; 885 886&remoteproc_slpi { 887 status = "okay"; 888 firmware-name = "qcom/sm8450/slpi.mbn"; 889}; 890 891&qupv3_id_0 { 892 status = "okay"; 893}; 894 895&qupv3_id_1 { 896 status = "okay"; 897}; 898 899&sdhc_2 { 900 cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; 901 pinctrl-names = "default", "sleep"; 902 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; 903 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; 904 vmmc-supply = <&vreg_l9c_2p96>; 905 vqmmc-supply = <&vreg_l6c_1p8>; 906 no-sdio; 907 no-mmc; 908 status = "okay"; 909}; 910 911&sound { 912 compatible = "qcom,sm8450-sndcard"; 913 model = "SM8450-HDK"; 914 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 915 "SpkrRight IN", "WSA_SPK2 OUT", 916 "IN1_HPHL", "HPHL_OUT", 917 "IN2_HPHR", "HPHR_OUT", 918 "AMIC2", "MIC BIAS2", 919 "VA DMIC0", "MIC BIAS1", 920 "VA DMIC1", "MIC BIAS1", 921 "VA DMIC2", "MIC BIAS3", 922 "TX DMIC0", "MIC BIAS1", 923 "TX DMIC1", "MIC BIAS2", 924 "TX DMIC2", "MIC BIAS3", 925 "TX SWR_ADC1", "ADC2_OUTPUT"; 926 927 wcd-playback-dai-link { 928 link-name = "WCD Playback"; 929 930 cpu { 931 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 932 }; 933 934 codec { 935 sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; 936 }; 937 938 platform { 939 sound-dai = <&q6apm>; 940 }; 941 }; 942 943 wcd-capture-dai-link { 944 link-name = "WCD Capture"; 945 946 cpu { 947 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 948 }; 949 950 codec { 951 sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; 952 }; 953 954 platform { 955 sound-dai = <&q6apm>; 956 }; 957 }; 958 959 wsa-dai-link { 960 link-name = "WSA Playback"; 961 962 cpu { 963 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 964 }; 965 966 codec { 967 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; 968 }; 969 970 platform { 971 sound-dai = <&q6apm>; 972 }; 973 }; 974 975 va-dai-link { 976 link-name = "VA Capture"; 977 978 cpu { 979 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 980 }; 981 982 codec { 983 sound-dai = <&vamacro 0>; 984 }; 985 986 platform { 987 sound-dai = <&q6apm>; 988 }; 989 }; 990}; 991 992&swr0 { 993 status = "okay"; 994 995 left_spkr: speaker@0,1 { 996 compatible = "sdw10217020200"; 997 reg = <0 1>; 998 pinctrl-names = "default"; 999 pinctrl-0 = <&spkr_1_sd_n_active>; 1000 powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; 1001 #sound-dai-cells = <0>; 1002 sound-name-prefix = "SpkrLeft"; 1003 #thermal-sensor-cells = <0>; 1004 vdd-supply = <&vreg_s10b_1p8>; 1005 }; 1006 1007 right_spkr: speaker@0,2 { 1008 compatible = "sdw10217020200"; 1009 reg = <0 2>; 1010 pinctrl-names = "default"; 1011 pinctrl-0 = <&spkr_2_sd_n_active>; 1012 powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; 1013 #sound-dai-cells = <0>; 1014 sound-name-prefix = "SpkrRight"; 1015 #thermal-sensor-cells = <0>; 1016 vdd-supply = <&vreg_s10b_1p8>; 1017 }; 1018}; 1019 1020&swr1 { 1021 status = "okay"; 1022 1023 wcd_rx: codec@0,4 { 1024 compatible = "sdw20217010d00"; 1025 reg = <0 4>; 1026 qcom,rx-port-mapping = <1 2 3 4 5>; 1027 }; 1028}; 1029 1030&swr2 { 1031 status = "okay"; 1032 1033 wcd_tx: codec@0,3 { 1034 compatible = "sdw20217010d00"; 1035 reg = <0 3>; 1036 qcom,tx-port-mapping = <1 1 2 3>; 1037 }; 1038}; 1039 1040&tlmm { 1041 gpio-reserved-ranges = <28 4>, <36 4>; 1042 1043 lt9611_irq_pin: lt9611-irq-state { 1044 pins = "gpio44"; 1045 function = "gpio"; 1046 bias-disable; 1047 }; 1048 1049 lt9611_rst_pin: lt9611-rst-state { 1050 pins = "gpio107"; 1051 function = "gpio"; 1052 output-high; 1053 }; 1054 1055 sdc2_card_det_n: sd-card-det-n-state { 1056 pins = "gpio92"; 1057 function = "gpio"; 1058 drive-strength = <2>; 1059 bias-pull-up; 1060 }; 1061}; 1062 1063&uart7 { 1064 status = "okay"; 1065}; 1066 1067&ufs_mem_hc { 1068 status = "okay"; 1069 1070 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1071 1072 vcc-supply = <&vreg_l7b_2p5>; 1073 vcc-max-microamp = <1100000>; 1074 vccq-supply = <&vreg_l9b_1p2>; 1075 vccq-max-microamp = <1200000>; 1076}; 1077 1078&ufs_mem_phy { 1079 status = "okay"; 1080 1081 vdda-phy-supply = <&vreg_l5b_0p88>; 1082 vdda-pll-supply = <&vreg_l6b_1p2>; 1083}; 1084 1085&usb_1 { 1086 status = "okay"; 1087}; 1088 1089&usb_1_dwc3 { 1090 dr_mode = "otg"; 1091 usb-role-switch; 1092}; 1093 1094&usb_1_dwc3_hs { 1095 remote-endpoint = <&pmic_glink_hs_in>; 1096}; 1097 1098&usb_1_dwc3_ss { 1099 remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; 1100}; 1101 1102&usb_1_hsphy { 1103 status = "okay"; 1104 1105 vdda-pll-supply = <&vreg_l5b_0p88>; 1106 vdda18-supply = <&vreg_l1c_1p8>; 1107 vdda33-supply = <&vreg_l2b_3p07>; 1108}; 1109 1110&usb_1_qmpphy { 1111 status = "okay"; 1112 1113 vdda-phy-supply = <&vreg_l6b_1p2>; 1114 vdda-pll-supply = <&vreg_l1b_0p91>; 1115 1116 orientation-switch; 1117}; 1118 1119&usb_1_qmpphy_dp_in { 1120 remote-endpoint = <&mdss_dp0_out>; 1121}; 1122 1123&usb_1_qmpphy_out { 1124 remote-endpoint = <&pmic_glink_ss_in>; 1125}; 1126 1127&usb_1_qmpphy_usb_ss_in { 1128 remote-endpoint = <&usb_1_dwc3_ss>; 1129}; 1130 1131&vamacro { 1132 pinctrl-0 = <&dmic01_default>, <&dmic02_default>; 1133 pinctrl-names = "default"; 1134 vdd-micb-supply = <&vreg_s10b_1p8>; 1135 qcom,dmic-sample-rate = <600000>; 1136 1137 status = "okay"; 1138}; 1139 1140&tlmm { 1141 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 1142 pins = "gpio1"; 1143 function = "gpio"; 1144 drive-strength = <16>; 1145 bias-disable; 1146 output-low; 1147 }; 1148 1149 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 1150 pins = "gpio89"; 1151 function = "gpio"; 1152 drive-strength = <16>; 1153 bias-disable; 1154 output-low; 1155 }; 1156 1157 wcd_default: wcd-reset-n-active-state { 1158 pins = "gpio43"; 1159 function = "gpio"; 1160 drive-strength = <16>; 1161 bias-disable; 1162 output-low; 1163 }; 1164}; 1165