1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt> 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/input/gpio-keys.h> 11#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 12#include "sm6125.dtsi" 13#include "pm6125.dtsi" 14 15/ { 16 model = "Xiaomi Mi A3"; 17 compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; 18 chassis-type = "handset"; 19 20 /* required for bootloader to select correct board */ 21 qcom,msm-id = <394 0>; /* sm6125 v1 */ 22 qcom,board-id = <11 0>; 23 24 chosen { 25 #address-cells = <2>; 26 #size-cells = <2>; 27 ranges; 28 29 framebuffer0: framebuffer@5c000000 { 30 compatible = "simple-framebuffer"; 31 reg = <0 0x5c000000 0 (1560 * 720 * 4)>; 32 width = <720>; 33 height = <1560>; 34 stride = <(720 * 4)>; 35 format = "a8r8g8b8"; 36 }; 37 }; 38 39 reserved-memory { 40 debug_mem: debug@ffb00000 { 41 reg = <0x0 0xffb00000 0x0 0xc0000>; 42 no-map; 43 }; 44 45 last_log_mem: lastlog@ffbc0000 { 46 reg = <0x0 0xffbc0000 0x0 0x80000>; 47 no-map; 48 }; 49 50 pstore_mem: ramoops@ffc00000 { 51 compatible = "ramoops"; 52 reg = <0x0 0xffc40000 0x0 0xc0000>; 53 record-size = <0x1000>; 54 console-size = <0x40000>; 55 msg-size = <0x20000 0x20000>; 56 }; 57 58 cmdline_mem: memory@ffd00000 { 59 reg = <0x0 0xffd40000 0x0 0x1000>; 60 no-map; 61 }; 62 }; 63 64 extcon_usb: usb-id { 65 compatible = "linux,extcon-usb-gpio"; 66 id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; 67 }; 68 69 gpio-keys { 70 compatible = "gpio-keys"; 71 72 pinctrl-0 = <&vol_up_n>; 73 pinctrl-names = "default"; 74 75 key-volume-up { 76 label = "Volume Up"; 77 gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; 78 linux,code = <KEY_VOLUMEUP>; 79 debounce-interval = <15>; 80 linux,can-disable; 81 wakeup-source; 82 }; 83 }; 84 85 thermal-zones { 86 rf-pa0-thermal { 87 polling-delay-passive = <0>; 88 polling-delay = <0>; 89 thermal-sensors = <&pm6125_adc_tm 0>; 90 91 trips { 92 active-config0 { 93 temperature = <125000>; 94 hysteresis = <1000>; 95 type = "critical"; 96 }; 97 }; 98 }; 99 100 quiet-thermal { 101 polling-delay-passive = <0>; 102 polling-delay = <5000>; 103 thermal-sensors = <&pm6125_adc_tm 1>; 104 105 trips { 106 active-config0 { 107 temperature = <125000>; 108 hysteresis = <1000>; 109 type = "critical"; 110 }; 111 }; 112 }; 113 114 xo-thermal { 115 polling-delay-passive = <0>; 116 polling-delay = <0>; 117 thermal-sensors = <&pm6125_adc_tm 2>; 118 119 trips { 120 active-config0 { 121 temperature = <125000>; 122 hysteresis = <1000>; 123 type = "critical"; 124 }; 125 }; 126 }; 127 }; 128}; 129 130&hsusb_phy1 { 131 vdd-supply = <&vreg_l7a>; 132 vdda-pll-supply = <&vreg_l10a>; 133 vdda-phy-dpdm-supply = <&vreg_l15a>; 134 status = "okay"; 135}; 136 137&pm6125_adc { 138 pinctrl-names = "default"; 139 pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; 140 141 adc-chan@4d { 142 reg = <ADC5_AMUX_THM1_100K_PU>; 143 qcom,ratiometric; 144 qcom,hw-settle-time = <200>; 145 qcom,pre-scaling = <1 1>; 146 label = "rf_pa0_therm"; 147 }; 148 149 adc-chan@4e { 150 reg = <ADC5_AMUX_THM2_100K_PU>; 151 qcom,ratiometric; 152 qcom,hw-settle-time = <200>; 153 qcom,pre-scaling = <1 1>; 154 label = "quiet_therm"; 155 }; 156 157 adc-chan@52 { 158 reg = <ADC5_GPIO1_100K_PU>; 159 qcom,ratiometric; 160 qcom,hw-settle-time = <200>; 161 qcom,pre-scaling = <1 1>; 162 label = "camera_flash_therm"; 163 }; 164 165 adc-chan@54 { 166 reg = <ADC5_GPIO3_100K_PU>; 167 qcom,ratiometric; 168 qcom,hw-settle-time = <200>; 169 qcom,pre-scaling = <1 1>; 170 label = "emmc_ufs_therm"; 171 }; 172}; 173 174&pm6125_adc_tm { 175 status = "okay"; 176 177 rf-pa0-therm@0 { 178 reg = <0>; 179 io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; 180 qcom,ratiometric; 181 qcom,hw-settle-time-us = <200>; 182 }; 183 184 quiet-therm@1 { 185 reg = <1>; 186 io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; 187 qcom,ratiometric; 188 qcom,hw-settle-time-us = <200>; 189 }; 190 191 xo-therm@2 { 192 reg = <2>; 193 io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; 194 qcom,ratiometric; 195 qcom,hw-settle-time-us = <200>; 196 }; 197}; 198 199&pm6125_gpios { 200 camera_flash_therm: camera-flash-therm-state { 201 pins = "gpio3"; 202 function = PMIC_GPIO_FUNC_NORMAL; 203 bias-high-impedance; 204 }; 205 206 emmc_ufs_therm: emmc-ufs-therm-state { 207 pins = "gpio6"; 208 function = PMIC_GPIO_FUNC_NORMAL; 209 bias-high-impedance; 210 }; 211 212 vol_up_n: vol-up-n-state { 213 pins = "gpio5"; 214 function = PMIC_GPIO_FUNC_NORMAL; 215 input-enable; 216 bias-pull-up; 217 }; 218}; 219 220&pon_pwrkey { 221 status = "okay"; 222}; 223 224&pon_resin { 225 linux,code = <KEY_VOLUMEDOWN>; 226 status = "okay"; 227}; 228 229&rpm_requests { 230 regulators-0 { 231 compatible = "qcom,rpm-pm6125-regulators"; 232 233 vreg_s6a: s6 { 234 regulator-min-microvolt = <936000>; 235 regulator-max-microvolt = <1422000>; 236 }; 237 238 vreg_l1a: l1 { 239 regulator-min-microvolt = <1200000>; 240 regulator-max-microvolt = <1256000>; 241 }; 242 243 vreg_l2a: l2 { 244 regulator-min-microvolt = <1000000>; 245 regulator-max-microvolt = <1056000>; 246 }; 247 248 vreg_l3a: l3 { 249 regulator-min-microvolt = <1000000>; 250 regulator-max-microvolt = <1064000>; 251 }; 252 253 vreg_l4a: l4 { 254 regulator-min-microvolt = <872000>; 255 regulator-max-microvolt = <976000>; 256 regulator-allow-set-load; 257 }; 258 259 vreg_l5a: l5 { 260 regulator-min-microvolt = <1648000>; 261 regulator-max-microvolt = <2950000>; 262 regulator-allow-set-load; 263 }; 264 265 vreg_l6a: l6 { 266 regulator-min-microvolt = <576000>; 267 regulator-max-microvolt = <656000>; 268 }; 269 270 vreg_l7a: l7 { 271 regulator-min-microvolt = <872000>; 272 regulator-max-microvolt = <976000>; 273 }; 274 275 vreg_l8a: l8 { 276 regulator-min-microvolt = <400000>; 277 regulator-max-microvolt = <728000>; 278 }; 279 280 vreg_l9a: l9 { 281 regulator-min-microvolt = <1800000>; 282 regulator-max-microvolt = <1896000>; 283 }; 284 285 vreg_l10a: l10 { 286 regulator-min-microvolt = <1800000>; 287 regulator-max-microvolt = <1896000>; 288 regulator-allow-set-load; 289 }; 290 291 vreg_l11a: l11 { 292 regulator-min-microvolt = <1800000>; 293 regulator-max-microvolt = <1952000>; 294 regulator-allow-set-load; 295 }; 296 297 vreg_l12a: l12 { 298 regulator-min-microvolt = <1800000>; 299 regulator-max-microvolt = <1996000>; 300 }; 301 302 vreg_l13a: l13 { 303 regulator-min-microvolt = <1800000>; 304 regulator-max-microvolt = <1832000>; 305 }; 306 307 vreg_l14a: l14 { 308 regulator-min-microvolt = <1800000>; 309 regulator-max-microvolt = <1904000>; 310 }; 311 312 vreg_l15a: l15 { 313 regulator-min-microvolt = <3104000>; 314 regulator-max-microvolt = <3232000>; 315 }; 316 317 vreg_l16a: l16 { 318 regulator-min-microvolt = <1800000>; 319 regulator-max-microvolt = <1904000>; 320 }; 321 322 vreg_l17a: l17 { 323 regulator-min-microvolt = <1248000>; 324 regulator-max-microvolt = <1304000>; 325 }; 326 327 vreg_l18a: l18 { 328 regulator-min-microvolt = <1200000>; 329 regulator-max-microvolt = <1264000>; 330 regulator-allow-set-load; 331 }; 332 333 vreg_l19a: l19 { 334 regulator-min-microvolt = <1648000>; 335 regulator-max-microvolt = <2952000>; 336 }; 337 338 vreg_l20a: l20 { 339 regulator-min-microvolt = <1648000>; 340 regulator-max-microvolt = <2952000>; 341 }; 342 343 vreg_l21a: l21 { 344 regulator-min-microvolt = <2600000>; 345 regulator-max-microvolt = <2856000>; 346 }; 347 348 vreg_l22a: l22 { 349 regulator-min-microvolt = <2944000>; 350 regulator-max-microvolt = <2950000>; 351 regulator-allow-set-load; 352 }; 353 354 vreg_l23a: l23 { 355 regulator-min-microvolt = <3000000>; 356 regulator-max-microvolt = <3400000>; 357 }; 358 359 vreg_l24a: l24 { 360 regulator-min-microvolt = <2944000>; 361 regulator-max-microvolt = <2950000>; 362 regulator-allow-set-load; 363 }; 364 }; 365}; 366 367&sdc2_off_state { 368 sd-cd-pins { 369 pins = "gpio98"; 370 function = "gpio"; 371 drive-strength = <2>; 372 bias-disable; 373 }; 374}; 375 376&sdc2_on_state { 377 sd-cd-pins { 378 pins = "gpio98"; 379 function = "gpio"; 380 drive-strength = <2>; 381 bias-pull-up; 382 }; 383}; 384 385&sdhc_2 { 386 cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; 387 vmmc-supply = <&vreg_l22a>; 388 vqmmc-supply = <&vreg_l5a>; 389 no-sdio; 390 no-mmc; 391 status = "okay"; 392}; 393 394&tlmm { 395 gpio-reserved-ranges = <22 2>, <28 6>; 396}; 397 398&ufs_mem_hc { 399 vcc-supply = <&vreg_l24a>; 400 vccq2-supply = <&vreg_l11a>; 401 vcc-max-microamp = <600000>; 402 vccq2-max-microamp = <600000>; 403 status = "okay"; 404}; 405 406&ufs_mem_phy { 407 vdda-phy-supply = <&vreg_l4a>; 408 vdda-pll-supply = <&vreg_l10a>; 409 vdda-phy-max-microamp = <51400>; 410 vdda-pll-max-microamp = <14200>; 411 vddp-ref-clk-supply = <&vreg_l18a>; 412 status = "okay"; 413}; 414 415&usb3 { 416 status = "okay"; 417}; 418 419&usb3_dwc3 { 420 extcon = <&extcon_usb>; 421}; 422