xref: /freebsd/sys/contrib/device-tree/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a) 
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
4 */
5
6/dts-v1/;
7
8#include "sm6125.dtsi"
9#include "pm6125.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/gpio-keys.h>
12#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
13
14/ {
15	/* required for bootloader to select correct board */
16	qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
17	qcom,board-id = <34 0>;
18
19	model = "Sony Xperia 10 II";
20	compatible = "sony,pdx201", "qcom,sm6125";
21	chassis-type = "handset";
22
23	aliases {
24		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
25		mmc1 = &sdhc_2; /* SDC2 SD card slot */
26	};
27
28	chosen {
29		#address-cells = <2>;
30		#size-cells = <2>;
31		ranges;
32
33		framebuffer0: framebuffer@5c000000 {
34			compatible = "simple-framebuffer";
35			reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
36			width = <1080>;
37			height = <2520>;
38			stride = <(1080 * 4)>;
39			format = "a8r8g8b8";
40		};
41	};
42
43	extcon_usb: extcon-usb {
44		compatible = "linux,extcon-usb-gpio";
45		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
46	};
47
48	gpio-keys {
49		compatible = "gpio-keys";
50
51		pinctrl-0 = <&vol_down_n>;
52		pinctrl-names = "default";
53
54		key-volume-down {
55			label = "Volume Down";
56			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
57			linux,code = <KEY_VOLUMEDOWN>;
58			debounce-interval = <15>;
59			linux,can-disable;
60			wakeup-source;
61		};
62	};
63
64	reserved-memory {
65		#address-cells = <2>;
66		#size-cells = <2>;
67		debug_mem: memory@ffb00000 {
68			reg = <0x0 0xffb00000 0x0 0xc0000>;
69			no-map;
70		};
71
72		last_log_mem: memory@ffbc0000 {
73			reg = <0x0 0xffbc0000 0x0 0x80000>;
74			no-map;
75		};
76
77		pstore_mem: ramoops@ffc00000 {
78			compatible = "ramoops";
79			reg = <0x0 0xffc40000 0x0 0xc0000>;
80			record-size = <0x1000>;
81			console-size = <0x40000>;
82			pmsg-size = <0x20000>;
83		};
84
85		cmdline_mem: memory@ffd00000 {
86			reg = <0x0 0xffd40000 0x0 0x1000>;
87			no-map;
88		};
89	};
90
91	thermal-zones {
92		rf-pa0-thermal {
93			polling-delay-passive = <0>;
94			polling-delay = <0>;
95			thermal-sensors = <&pm6125_adc_tm 0>;
96
97			trips {
98				active-config0 {
99					temperature = <125000>;
100					hysteresis = <1000>;
101					type = "critical";
102				};
103			};
104		};
105
106		quiet-thermal {
107			polling-delay-passive = <0>;
108			polling-delay = <5000>;
109			thermal-sensors = <&pm6125_adc_tm 1>;
110
111			trips {
112				active-config0 {
113					temperature = <125000>;
114					hysteresis = <1000>;
115					type = "critical";
116				};
117			};
118		};
119
120		xo-thermal {
121			polling-delay-passive = <0>;
122			polling-delay = <0>;
123			thermal-sensors = <&pm6125_adc_tm 2>;
124
125			trips {
126				active-config0 {
127					temperature = <125000>;
128					hysteresis = <1000>;
129					type = "critical";
130				};
131			};
132		};
133
134		rf-pa1-thermal {
135			polling-delay-passive = <0>;
136			polling-delay = <0>;
137			thermal-sensors = <&pm6125_adc_tm 3>;
138
139			trips {
140				active-config0 {
141					temperature = <125000>;
142					hysteresis = <1000>;
143					type = "critical";
144				};
145			};
146		};
147	};
148};
149
150&gpi_dma0 {
151	status = "okay";
152};
153
154&hsusb_phy1 {
155	vdd-supply = <&pm6125_l7>;
156	vdda-pll-supply = <&pm6125_l10>;
157	vdda-phy-dpdm-supply = <&pm6125_l15>;
158	status = "okay";
159};
160
161&i2c1 {
162	clock-frequency = <400000>;
163	status = "okay";
164
165	/* NXP PN553 NFC @ 28 */
166};
167
168&i2c2 {
169	clock-frequency = <400000>;
170	status = "okay";
171
172	/* Samsung touchscreen @ 48 */
173};
174
175&i2c3 {
176	clock-frequency = <1000000>;
177	status = "okay";
178
179	/* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
180};
181
182&mdss {
183	status = "okay";
184};
185
186&mdss_dsi0 {
187	vdda-supply = <&pm6125_l18>;
188	status = "okay";
189
190	panel@0 {
191		compatible = "samsung,sofef01-m-ams597ut01";
192		reg = <0>;
193
194		reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
195
196		vddio-supply = <&pm6125_l12>;
197
198		pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>;
199		pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>;
200		pinctrl-names = "default", "sleep";
201
202		port {
203			panel_in: endpoint {
204				remote-endpoint = <&mdss_dsi0_out>;
205			};
206		};
207	};
208};
209
210&mdss_dsi0_out {
211	remote-endpoint = <&panel_in>;
212	data-lanes = <0 1 2 3>;
213};
214
215&mdss_dsi0_phy {
216	status = "okay";
217};
218
219&pm6125_adc {
220	pinctrl-names = "default";
221	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
222
223	channel@4d {
224		reg = <ADC5_AMUX_THM1_100K_PU>;
225		qcom,ratiometric;
226		qcom,hw-settle-time = <200>;
227		qcom,pre-scaling = <1 1>;
228		label = "rf_pa0_therm";
229	};
230
231	channel@4e {
232		reg = <ADC5_AMUX_THM2_100K_PU>;
233		qcom,ratiometric;
234		qcom,hw-settle-time = <200>;
235		qcom,pre-scaling = <1 1>;
236		label = "quiet_therm";
237	};
238
239	channel@52 {
240		reg = <ADC5_GPIO1_100K_PU>;
241		qcom,ratiometric;
242		qcom,hw-settle-time = <200>;
243		qcom,pre-scaling = <1 1>;
244		label = "camera_flash_therm";
245	};
246
247	channel@54 {
248		reg = <ADC5_GPIO3_100K_PU>;
249		qcom,ratiometric;
250		qcom,hw-settle-time = <200>;
251		qcom,pre-scaling = <1 1>;
252		label = "emmc_ufs_therm";
253	};
254
255	channel@55 {
256		reg = <ADC5_GPIO4_100K_PU>;
257		qcom,ratiometric;
258		qcom,hw-settle-time = <200>;
259		qcom,pre-scaling = <1 1>;
260		label = "rf_pa1_therm";
261	};
262};
263
264&pm6125_adc_tm {
265	status = "okay";
266
267	rf-pa0-therm@0 {
268		reg = <0>;
269		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
270		qcom,ratiometric;
271		qcom,hw-settle-time-us = <200>;
272	};
273
274	quiet-therm@1 {
275		reg = <1>;
276		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
277		qcom,ratiometric;
278		qcom,hw-settle-time-us = <200>;
279	};
280
281	xo-therm@2 {
282		reg = <2>;
283		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
284		qcom,ratiometric;
285		qcom,hw-settle-time-us = <200>;
286	};
287
288	rf-pa1-therm@3 {
289		reg = <3>;
290		io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
291		qcom,ratiometric;
292		qcom,hw-settle-time-us = <200>;
293	};
294};
295
296&pm6125_gpios {
297	camera_flash_therm: camera-flash-therm-state {
298		pins = "gpio3";
299		function = PMIC_GPIO_FUNC_NORMAL;
300		bias-high-impedance;
301	};
302
303	emmc_ufs_therm: emmc-ufs-therm-state {
304		pins = "gpio6";
305		function = PMIC_GPIO_FUNC_NORMAL;
306		bias-high-impedance;
307	};
308
309	rf_pa1_therm: rf-pa1-therm-state {
310		pins = "gpio7";
311		function = PMIC_GPIO_FUNC_NORMAL;
312		bias-high-impedance;
313	};
314};
315
316&pon_pwrkey {
317	status = "okay";
318};
319
320&pon_resin {
321	status = "okay";
322	linux,code = <KEY_VOLUMEUP>;
323};
324
325&rpm_requests {
326	regulators-0 {
327		compatible = "qcom,rpm-pm6125-regulators";
328
329		vdd_l2_l3_l4-supply = <&pm6125_l7>;
330		vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>;
331
332		/*
333		 * S3/S4 is VDD_CX
334		 * S5 is VDD_MX/WCSS_MX
335		 */
336
337		pm6125_s6: s6 {
338			regulator-min-microvolt = <936000>;
339			regulator-max-microvolt = <1422000>;
340		};
341
342		pm6125_l1: l1 {
343			regulator-min-microvolt = <1200000>;
344			regulator-max-microvolt = <1256000>;
345		};
346
347		pm6125_l2: l2 {
348			regulator-min-microvolt = <1000000>;
349			regulator-max-microvolt = <1056000>;
350		};
351
352		pm6125_l3: l3 {
353			regulator-min-microvolt = <1000000>;
354			regulator-max-microvolt = <1064000>;
355		};
356
357		pm6125_l4: l4 {
358			regulator-min-microvolt = <872000>;
359			regulator-max-microvolt = <976000>;
360		};
361
362		pm6125_l5: l5 {
363			regulator-min-microvolt = <1648000>;
364			regulator-max-microvolt = <2950000>;
365			regulator-allow-set-load;
366		};
367
368		pm6125_l6: l6 {
369			regulator-min-microvolt = <576000>;
370			regulator-max-microvolt = <656000>;
371		};
372
373		pm6125_l7: l7 {
374			regulator-min-microvolt = <872000>;
375			regulator-max-microvolt = <976000>;
376		};
377
378		pm6125_l8: l8 {
379			regulator-min-microvolt = <400000>;
380			regulator-max-microvolt = <728000>;
381		};
382
383		pm6125_l9: l9 {
384			regulator-min-microvolt = <1800000>;
385			regulator-max-microvolt = <1896000>;
386		};
387
388		pm6125_l10: l10 {
389			regulator-min-microvolt = <1800000>;
390			regulator-max-microvolt = <1896000>;
391		};
392
393		pm6125_l11: l11 {
394			regulator-min-microvolt = <1800000>;
395			regulator-max-microvolt = <1800000>;
396			regulator-allow-set-load;
397		};
398
399		pm6125_l12: l12 {
400			regulator-min-microvolt = <1800000>;
401			regulator-max-microvolt = <1996000>;
402		};
403
404		pm6125_l13: l13 {
405			regulator-min-microvolt = <1800000>;
406			regulator-max-microvolt = <1832000>;
407		};
408
409		pm6125_l14: l14 {
410			regulator-min-microvolt = <1800000>;
411			regulator-max-microvolt = <1904000>;
412		};
413
414		pm6125_l15: l15 {
415			regulator-min-microvolt = <3104000>;
416			regulator-max-microvolt = <3232000>;
417		};
418
419		pm6125_l16: l16 {
420			regulator-min-microvolt = <1800000>;
421			regulator-max-microvolt = <1904000>;
422		};
423
424		pm6125_l17: l17 {
425			regulator-min-microvolt = <1248000>;
426			regulator-max-microvolt = <1304000>;
427		};
428
429		pm6125_l18: l18 {
430			regulator-min-microvolt = <1200000>;
431			regulator-max-microvolt = <1264000>;
432		};
433
434		pm6125_l19: l19 {
435			regulator-min-microvolt = <1648000>;
436			regulator-max-microvolt = <2952000>;
437		};
438
439		pm6125_l20: l20 {
440			regulator-min-microvolt = <1648000>;
441			regulator-max-microvolt = <2952000>;
442		};
443
444		pm6125_l21: l21 {
445			regulator-min-microvolt = <2600000>;
446			regulator-max-microvolt = <2856000>;
447		};
448
449		pm6125_l22: l22 {
450			regulator-min-microvolt = <2944000>;
451			regulator-max-microvolt = <2950000>;
452			regulator-allow-set-load;
453		};
454
455		pm6125_l23: l23 {
456			regulator-min-microvolt = <3000000>;
457			regulator-max-microvolt = <3400000>;
458		};
459
460		pm6125_l24: l24 {
461			regulator-min-microvolt = <2944000>;
462			regulator-max-microvolt = <2950000>;
463			regulator-allow-set-load;
464		};
465	};
466};
467
468&qupv3_id_0 {
469	status = "okay";
470};
471
472&sdc2_off_state {
473	sd-cd-pins {
474		pins = "gpio98";
475		function = "gpio";
476		drive-strength = <2>;
477		bias-disable;
478	};
479};
480
481&sdc2_on_state {
482	sd-cd-pins {
483		pins = "gpio98";
484		function = "gpio";
485		drive-strength = <2>;
486		bias-pull-up;
487	};
488};
489
490&sdhc_1 {
491	vmmc-supply = <&pm6125_l24>;
492	vqmmc-supply = <&pm6125_l11>;
493	status = "okay";
494};
495
496&sdhc_2 {
497	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
498	vmmc-supply = <&pm6125_l22>;
499	vqmmc-supply = <&pm6125_l5>;
500	no-sdio;
501	no-mmc;
502	status = "okay";
503};
504
505&tlmm {
506	gpio-reserved-ranges = <22 2>, <28 6>;
507
508	vol_down_n: vol-down-n-state {
509		pins = "gpio47";
510		function = "gpio";
511		drive-strength = <2>;
512		bias-disable;
513	};
514
515	mdss_te_active_sleep: mdss-te-active-sleep-state {
516		pins = "gpio89";
517		function = "mdp_vsync";
518		drive-strength = <2>;
519		bias-pull-down;
520	};
521
522	mdss_dsi_active: mdss-dsi-active-state {
523		pins = "gpio90";
524		function = "gpio";
525		drive-strength = <8>;
526		bias-disable;
527	};
528
529	mdss_dsi_sleep: mdss-dsi-sleep-state {
530		pins = "gpio90";
531		function = "gpio";
532		drive-strength = <2>;
533		bias-pull-down;
534	};
535
536};
537
538&usb3 {
539	status = "okay";
540};
541
542&usb3_dwc3 {
543	extcon = <&extcon_usb>;
544};
545