xref: /freebsd/sys/contrib/device-tree/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts (revision cfd6422a5217410fbd66f7a7a8a64d9d85e61229)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Lenovo Yoga C630
4 *
5 * Copyright (c) 2019, Linaro Ltd.
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12#include <dt-bindings/sound/qcom,q6afe.h>
13#include <dt-bindings/sound/qcom,q6asm.h>
14#include "sdm845.dtsi"
15#include "pm8998.dtsi"
16
17/ {
18	model = "Lenovo Yoga C630";
19	compatible = "lenovo,yoga-c630", "qcom,sdm845";
20
21	aliases {
22		hsuart0 = &uart6;
23	};
24};
25
26&adsp_pas {
27	firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
28	status = "okay";
29};
30
31&apps_rsc {
32	pm8998-rpmh-regulators {
33		compatible = "qcom,pm8998-rpmh-regulators";
34		qcom,pmic-id = "a";
35
36		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
37		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
38
39		vreg_s2a_1p125: smps2 {
40		};
41
42		vreg_s3a_1p35: smps3 {
43			regulator-min-microvolt = <1352000>;
44			regulator-max-microvolt = <1352000>;
45			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
46		};
47
48		vreg_s4a_1p8: smps4 {
49			regulator-min-microvolt = <1800000>;
50			regulator-max-microvolt = <1800000>;
51			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
52		};
53
54		vreg_s5a_2p04: smps5 {
55			regulator-min-microvolt = <2040000>;
56			regulator-max-microvolt = <2040000>;
57			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
58		};
59
60		vreg_s7a_1p025: smps7 {
61		};
62
63		vdd_qusb_hs0:
64		vdda_hp_pcie_core:
65		vdda_mipi_csi0_0p9:
66		vdda_mipi_csi1_0p9:
67		vdda_mipi_csi2_0p9:
68		vdda_mipi_dsi0_pll:
69		vdda_mipi_dsi1_pll:
70		vdda_qlink_lv:
71		vdda_qlink_lv_ck:
72		vdda_qrefs_0p875:
73		vdda_pcie_core:
74		vdda_pll_cc_ebi01:
75		vdda_pll_cc_ebi23:
76		vdda_sp_sensor:
77		vdda_ufs1_core:
78		vdda_ufs2_core:
79		vdda_usb1_ss_core:
80		vdda_usb2_ss_core:
81		vreg_l1a_0p875: ldo1 {
82			regulator-min-microvolt = <880000>;
83			regulator-max-microvolt = <880000>;
84			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
85		};
86
87		vddpx_10:
88		vreg_l2a_1p2: ldo2 {
89			regulator-min-microvolt = <1200000>;
90			regulator-max-microvolt = <1200000>;
91			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
92			regulator-always-on;
93		};
94
95		vreg_l3a_1p0: ldo3 {
96		};
97
98		vdd_wcss_cx:
99		vdd_wcss_mx:
100		vdda_wcss_pll:
101		vreg_l5a_0p8: ldo5 {
102			regulator-min-microvolt = <800000>;
103			regulator-max-microvolt = <800000>;
104			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
105		};
106
107		vddpx_13:
108		vreg_l6a_1p8: ldo6 {
109			regulator-min-microvolt = <1800000>;
110			regulator-max-microvolt = <1800000>;
111			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
112		};
113
114		vreg_l7a_1p8: ldo7 {
115			regulator-min-microvolt = <1800000>;
116			regulator-max-microvolt = <1800000>;
117			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
118		};
119
120		vreg_l8a_1p2: ldo8 {
121		};
122
123		vreg_l9a_1p8: ldo9 {
124		};
125
126		vreg_l10a_1p8: ldo10 {
127		};
128
129		vreg_l11a_1p0: ldo11 {
130		};
131
132		vdd_qfprom:
133		vdd_qfprom_sp:
134		vdda_apc1_cs_1p8:
135		vdda_gfx_cs_1p8:
136		vdda_qrefs_1p8:
137		vdda_qusb_hs0_1p8:
138		vddpx_11:
139		vreg_l12a_1p8: ldo12 {
140			regulator-min-microvolt = <1800000>;
141			regulator-max-microvolt = <1800000>;
142			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
143		};
144
145		vddpx_2:
146		vreg_l13a_2p95: ldo13 {
147		};
148
149		vreg_l14a_1p88: ldo14 {
150			regulator-min-microvolt = <1880000>;
151			regulator-max-microvolt = <1880000>;
152			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
153			regulator-always-on;
154		};
155
156		vreg_l15a_1p8: ldo15 {
157		};
158
159		vreg_l16a_2p7: ldo16 {
160		};
161
162		vreg_l17a_1p3: ldo17 {
163			regulator-min-microvolt = <1304000>;
164			regulator-max-microvolt = <1304000>;
165			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
166		};
167
168		vreg_l18a_2p7: ldo18 {
169		};
170
171		vreg_l19a_3p0: ldo19 {
172			regulator-min-microvolt = <3100000>;
173			regulator-max-microvolt = <3108000>;
174			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
175		};
176
177		vreg_l20a_2p95: ldo20 {
178			regulator-min-microvolt = <2960000>;
179			regulator-max-microvolt = <2960000>;
180			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
181		};
182
183		vreg_l21a_2p95: ldo21 {
184		};
185
186		vreg_l22a_2p85: ldo22 {
187		};
188
189		vreg_l23a_3p3: ldo23 {
190		};
191
192		vdda_qusb_hs0_3p1:
193		vreg_l24a_3p075: ldo24 {
194			regulator-min-microvolt = <3075000>;
195			regulator-max-microvolt = <3083000>;
196			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
197		};
198
199		vreg_l25a_3p3: ldo25 {
200			regulator-min-microvolt = <3104000>;
201			regulator-max-microvolt = <3112000>;
202			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203		};
204
205		vdda_hp_pcie_1p2:
206		vdda_hv_ebi0:
207		vdda_hv_ebi1:
208		vdda_hv_ebi2:
209		vdda_hv_ebi3:
210		vdda_mipi_csi_1p25:
211		vdda_mipi_dsi0_1p2:
212		vdda_mipi_dsi1_1p2:
213		vdda_pcie_1p2:
214		vdda_ufs1_1p2:
215		vdda_ufs2_1p2:
216		vdda_usb1_ss_1p2:
217		vdda_usb2_ss_1p2:
218		vreg_l26a_1p2: ldo26 {
219			regulator-min-microvolt = <1200000>;
220			regulator-max-microvolt = <1208000>;
221			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222		};
223
224		vreg_l28a_3p0: ldo28 {
225		};
226
227		vreg_lvs1a_1p8: lvs1 {
228		};
229
230		vreg_lvs2a_1p8: lvs2 {
231		};
232	};
233};
234
235&apps_smmu {
236	/* TODO: Figure out how to survive booting with this enabled */
237	status = "disabled";
238};
239
240&cdsp_pas {
241	firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
242	status = "okay";
243};
244
245&gcc {
246	protected-clocks = <GCC_QSPI_CORE_CLK>,
247			   <GCC_QSPI_CORE_CLK_SRC>,
248			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
249};
250
251&gpu {
252	zap-shader {
253		memory-region = <&gpu_mem>;
254		firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
255	};
256};
257
258&i2c1 {
259	status = "okay";
260	clock-frequency = <400000>;
261};
262
263&i2c3 {
264	status = "okay";
265	clock-frequency = <400000>;
266
267	hid@15 {
268		compatible = "hid-over-i2c";
269		reg = <0x15>;
270		hid-descr-addr = <0x1>;
271
272		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
273	};
274
275	hid@2c {
276		compatible = "hid-over-i2c";
277		reg = <0x2c>;
278		hid-descr-addr = <0x20>;
279
280		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
281
282		pinctrl-names = "default";
283		pinctrl-0 = <&i2c2_hid_active>;
284	};
285};
286
287&i2c5 {
288	status = "okay";
289	clock-frequency = <400000>;
290
291	hid@10 {
292		compatible = "hid-over-i2c";
293		reg = <0x10>;
294		hid-descr-addr = <0x1>;
295
296		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
297
298		pinctrl-names = "default";
299		pinctrl-0 = <&i2c6_hid_active>;
300	};
301};
302
303&i2c11 {
304	status = "okay";
305	clock-frequency = <400000>;
306
307	hid@5c {
308		compatible = "hid-over-i2c";
309		reg = <0x5c>;
310		hid-descr-addr = <0x1>;
311
312		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
313
314		pinctrl-names = "default";
315		pinctrl-0 = <&i2c12_hid_active>;
316	};
317};
318
319&mss_pil {
320	firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
321};
322
323&qup_i2c12_default {
324	drive-strength = <2>;
325	bias-disable;
326};
327
328&qup_uart6_default {
329	pinmux {
330		 pins = "gpio45", "gpio46", "gpio47", "gpio48";
331		 function = "qup6";
332	};
333
334	cts {
335		pins = "gpio45";
336		bias-pull-down;
337	};
338
339	rts-tx {
340		pins = "gpio46", "gpio47";
341		drive-strength = <2>;
342		bias-disable;
343	};
344
345	rx {
346		pins = "gpio48";
347		bias-pull-up;
348	};
349};
350
351&qupv3_id_0 {
352	status = "okay";
353};
354
355&qupv3_id_1 {
356	status = "okay";
357};
358
359&q6asmdai {
360	dai@0 {
361		reg = <0>;
362	};
363
364	dai@1 {
365		reg = <1>;
366	};
367};
368
369&sound {
370	compatible = "qcom,db845c-sndcard";
371	model = "Lenovo-YOGA-C630-13Q50";
372
373	audio-routing =
374		"RX_BIAS", "MCLK",
375		"AMIC2", "MIC BIAS2",
376		"SpkrLeft IN", "SPK1 OUT",
377		"SpkrRight IN", "SPK2 OUT",
378		"MM_DL1",  "MultiMedia1 Playback",
379		"MultiMedia2 Capture", "MM_UL2";
380
381	mm1-dai-link {
382		link-name = "MultiMedia1";
383		cpu {
384			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
385		};
386	};
387
388	mm2-dai-link {
389		link-name = "MultiMedia2";
390		cpu {
391			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
392		};
393	};
394
395	slim-dai-link {
396		link-name = "SLIM Playback";
397		cpu {
398			sound-dai = <&q6afedai SLIMBUS_0_RX>;
399		};
400
401		platform {
402			sound-dai = <&q6routing>;
403		};
404
405		codec {
406			sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
407		};
408	};
409
410	slimcap-dai-link {
411		link-name = "SLIM Capture";
412		cpu {
413			sound-dai = <&q6afedai SLIMBUS_0_TX>;
414		};
415
416		platform {
417			sound-dai = <&q6routing>;
418		};
419
420		codec {
421			sound-dai = <&wcd9340 1>;
422		};
423	};
424};
425
426&tlmm {
427	gpio-reserved-ranges = <0 4>, <81 4>;
428
429	i2c2_hid_active: i2c2-hid-active {
430		pins = <37>;
431		function = "gpio";
432
433		input-enable;
434		bias-pull-up;
435		drive-strength = <2>;
436	};
437
438	i2c6_hid_active: i2c6-hid-active {
439		pins = <125>;
440		function = "gpio";
441
442		input-enable;
443		bias-pull-up;
444		drive-strength = <2>;
445	};
446
447	i2c12_hid_active: i2c12-hid-active {
448		pins = <92>;
449		function = "gpio";
450
451		input-enable;
452		bias-pull-up;
453		drive-strength = <2>;
454	};
455
456	wcd_intr_default: wcd_intr_default {
457		pins = <54>;
458		function = "gpio";
459
460		input-enable;
461		bias-pull-down;
462		drive-strength = <2>;
463	};
464};
465
466&uart6 {
467	status = "okay";
468
469	bluetooth {
470		compatible = "qcom,wcn3990-bt";
471
472		vddio-supply = <&vreg_s4a_1p8>;
473		vddxo-supply = <&vreg_l7a_1p8>;
474		vddrf-supply = <&vreg_l17a_1p3>;
475		vddch0-supply = <&vreg_l25a_3p3>;
476		max-speed = <3200000>;
477	};
478};
479
480&ufs_mem_hc {
481	status = "okay";
482
483	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
484
485	vcc-supply = <&vreg_l20a_2p95>;
486	vcc-max-microamp = <600000>;
487};
488
489&ufs_mem_phy {
490	status = "okay";
491
492	vdda-phy-supply = <&vdda_ufs1_core>;
493	vdda-pll-supply = <&vdda_ufs1_1p2>;
494};
495
496&usb_1 {
497	status = "okay";
498};
499
500&usb_1_dwc3 {
501	dr_mode = "host";
502};
503
504&usb_1_hsphy {
505	status = "okay";
506
507	vdd-supply = <&vdda_usb1_ss_core>;
508	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
509	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
510
511	qcom,imp-res-offset-value = <8>;
512	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
513	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
514	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
515};
516
517&usb_1_qmpphy {
518	status = "okay";
519
520	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
521	vdda-pll-supply = <&vdda_usb1_ss_core>;
522};
523
524&usb_2 {
525	status = "okay";
526};
527
528&usb_2_dwc3 {
529	dr_mode = "host";
530};
531
532&usb_2_hsphy {
533	status = "okay";
534
535	vdd-supply = <&vdda_usb2_ss_core>;
536	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
537	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
538
539	qcom,imp-res-offset-value = <8>;
540	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
541};
542
543&usb_2_qmpphy {
544	status = "okay";
545
546	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
547	vdda-pll-supply = <&vdda_usb2_ss_core>;
548};
549
550&wcd9340{
551	pinctrl-0 = <&wcd_intr_default>;
552	pinctrl-names = "default";
553	clock-names = "extclk";
554	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
555	reset-gpios = <&tlmm 64 0>;
556	vdd-buck-supply = <&vreg_s4a_1p8>;
557	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
558	vdd-tx-supply = <&vreg_s4a_1p8>;
559	vdd-rx-supply = <&vreg_s4a_1p8>;
560	vdd-io-supply = <&vreg_s4a_1p8>;
561
562	swm: swm@c85 {
563		left_spkr: wsa8810-left{
564			compatible = "sdw10217211000";
565			reg = <0 3>;
566			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
567			#thermal-sensor-cells = <0>;
568			sound-name-prefix = "SpkrLeft";
569			#sound-dai-cells = <0>;
570		};
571
572		right_spkr: wsa8810-right{
573			compatible = "sdw10217211000";
574			powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
575			reg = <0 4>;
576			#thermal-sensor-cells = <0>;
577			sound-name-prefix = "SpkrRight";
578			#sound-dai-cells = <0>;
579		};
580	};
581};
582
583&wifi {
584	status = "okay";
585
586	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
587	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
588	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
589	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
590
591	qcom,snoc-host-cap-8bit-quirk;
592};
593