1// SPDX-License-Identifier: GPL-2.0 2/* 3 * SDM845 MTP board device tree source 4 * 5 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11#include "sdm845.dtsi" 12#include "pm8998.dtsi" 13#include "pmi8998.dtsi" 14 15/ { 16 model = "Qualcomm Technologies, Inc. SDM845 MTP"; 17 compatible = "qcom,sdm845-mtp", "qcom,sdm845"; 18 chassis-type = "handset"; 19 20 aliases { 21 serial0 = &uart9; 22 }; 23 24 chosen { 25 stdout-path = "serial0:115200n8"; 26 }; 27 28 vph_pwr: vph-pwr-regulator { 29 compatible = "regulator-fixed"; 30 regulator-name = "vph_pwr"; 31 regulator-min-microvolt = <3700000>; 32 regulator-max-microvolt = <3700000>; 33 }; 34 35 /* 36 * Apparently RPMh does not provide support for PM8998 S4 because it 37 * is always-on; model it as a fixed regulator. 38 */ 39 vreg_s4a_1p8: pm8998-smps4 { 40 compatible = "regulator-fixed"; 41 regulator-name = "vreg_s4a_1p8"; 42 43 regulator-min-microvolt = <1800000>; 44 regulator-max-microvolt = <1800000>; 45 46 regulator-always-on; 47 regulator-boot-on; 48 49 vin-supply = <&vph_pwr>; 50 }; 51 52 thermal-zones { 53 xo_thermal: xo-thermal { 54 thermal-sensors = <&pm8998_adc_tm 1>; 55 56 trips { 57 trip-point { 58 temperature = <125000>; 59 hysteresis = <10000>; 60 type = "passive"; 61 }; 62 }; 63 }; 64 65 msm_thermal: msm-thermal { 66 thermal-sensors = <&pm8998_adc_tm 2>; 67 68 trips { 69 trip-point { 70 temperature = <125000>; 71 hysteresis = <10000>; 72 type = "passive"; 73 }; 74 }; 75 }; 76 77 pa_thermal: pa-thermal { 78 thermal-sensors = <&pm8998_adc_tm 3>; 79 80 trips { 81 trip-point { 82 temperature = <125000>; 83 hysteresis = <10000>; 84 type = "passive"; 85 }; 86 }; 87 }; 88 89 quiet_thermal: quiet-thermal { 90 thermal-sensors = <&pm8998_adc_tm 4>; 91 92 trips { 93 trip-point { 94 temperature = <125000>; 95 hysteresis = <10000>; 96 type = "passive"; 97 }; 98 }; 99 }; 100 }; 101}; 102 103&adsp_pas { 104 status = "okay"; 105 firmware-name = "qcom/sdm845/adsp.mbn"; 106}; 107 108&apps_rsc { 109 regulators-0 { 110 compatible = "qcom,pm8998-rpmh-regulators"; 111 qcom,pmic-id = "a"; 112 113 vdd-s1-supply = <&vph_pwr>; 114 vdd-s2-supply = <&vph_pwr>; 115 vdd-s3-supply = <&vph_pwr>; 116 vdd-s4-supply = <&vph_pwr>; 117 vdd-s5-supply = <&vph_pwr>; 118 vdd-s6-supply = <&vph_pwr>; 119 vdd-s7-supply = <&vph_pwr>; 120 vdd-s8-supply = <&vph_pwr>; 121 vdd-s9-supply = <&vph_pwr>; 122 vdd-s10-supply = <&vph_pwr>; 123 vdd-s11-supply = <&vph_pwr>; 124 vdd-s12-supply = <&vph_pwr>; 125 vdd-s13-supply = <&vph_pwr>; 126 vdd-l1-l27-supply = <&vreg_s7a_1p025>; 127 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; 128 vdd-l3-l11-supply = <&vreg_s7a_1p025>; 129 vdd-l4-l5-supply = <&vreg_s7a_1p025>; 130 vdd-l6-supply = <&vph_pwr>; 131 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; 132 vdd-l9-supply = <&vreg_bob>; 133 vdd-l10-l23-l25-supply = <&vreg_bob>; 134 vdd-l13-l19-l21-supply = <&vreg_bob>; 135 vdd-l16-l28-supply = <&vreg_bob>; 136 vdd-l18-l22-supply = <&vreg_bob>; 137 vdd-l20-l24-supply = <&vreg_bob>; 138 vdd-l26-supply = <&vreg_s3a_1p35>; 139 vin-lvs-1-2-supply = <&vreg_s4a_1p8>; 140 141 vreg_s2a_1p125: smps2 { 142 regulator-min-microvolt = <1100000>; 143 regulator-max-microvolt = <1100000>; 144 }; 145 146 vreg_s3a_1p35: smps3 { 147 regulator-min-microvolt = <1352000>; 148 regulator-max-microvolt = <1352000>; 149 }; 150 151 vreg_s5a_2p04: smps5 { 152 regulator-min-microvolt = <1904000>; 153 regulator-max-microvolt = <2040000>; 154 }; 155 156 vreg_s7a_1p025: smps7 { 157 regulator-min-microvolt = <900000>; 158 regulator-max-microvolt = <1028000>; 159 }; 160 161 vdd_qusb_hs0: 162 vdda_hp_pcie_core: 163 vdda_mipi_csi0_0p9: 164 vdda_mipi_csi1_0p9: 165 vdda_mipi_csi2_0p9: 166 vdda_mipi_dsi0_pll: 167 vdda_mipi_dsi1_pll: 168 vdda_qlink_lv: 169 vdda_qlink_lv_ck: 170 vdda_qrefs_0p875: 171 vdda_pcie_core: 172 vdda_pll_cc_ebi01: 173 vdda_pll_cc_ebi23: 174 vdda_sp_sensor: 175 vdda_ufs1_core: 176 vdda_ufs2_core: 177 vdda_usb1_ss_core: 178 vdda_usb2_ss_core: 179 vreg_l1a_0p875: ldo1 { 180 regulator-min-microvolt = <880000>; 181 regulator-max-microvolt = <880000>; 182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 183 }; 184 185 vddpx_10: 186 vreg_l2a_1p2: ldo2 { 187 regulator-min-microvolt = <1200000>; 188 regulator-max-microvolt = <1200000>; 189 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 190 regulator-always-on; 191 }; 192 193 vreg_l3a_1p0: ldo3 { 194 regulator-min-microvolt = <1000000>; 195 regulator-max-microvolt = <1000000>; 196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 197 }; 198 199 vdd_wcss_cx: 200 vdd_wcss_mx: 201 vdda_wcss_pll: 202 vreg_l5a_0p8: ldo5 { 203 regulator-min-microvolt = <800000>; 204 regulator-max-microvolt = <800000>; 205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 206 }; 207 208 vddpx_13: 209 vreg_l6a_1p8: ldo6 { 210 regulator-min-microvolt = <1856000>; 211 regulator-max-microvolt = <1856000>; 212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 213 }; 214 215 vreg_l7a_1p8: ldo7 { 216 regulator-min-microvolt = <1800000>; 217 regulator-max-microvolt = <1800000>; 218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 219 }; 220 221 vreg_l8a_1p2: ldo8 { 222 regulator-min-microvolt = <1200000>; 223 regulator-max-microvolt = <1248000>; 224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 225 }; 226 227 vreg_l9a_1p8: ldo9 { 228 regulator-min-microvolt = <1704000>; 229 regulator-max-microvolt = <2928000>; 230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 231 }; 232 233 vreg_l10a_1p8: ldo10 { 234 regulator-min-microvolt = <1704000>; 235 regulator-max-microvolt = <2928000>; 236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 237 }; 238 239 vreg_l11a_1p0: ldo11 { 240 regulator-min-microvolt = <1000000>; 241 regulator-max-microvolt = <1048000>; 242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 243 }; 244 245 vdd_qfprom: 246 vdd_qfprom_sp: 247 vdda_apc1_cs_1p8: 248 vdda_gfx_cs_1p8: 249 vdda_qrefs_1p8: 250 vdda_qusb_hs0_1p8: 251 vddpx_11: 252 vreg_l12a_1p8: ldo12 { 253 regulator-min-microvolt = <1800000>; 254 regulator-max-microvolt = <1800000>; 255 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 256 }; 257 258 vddpx_2: 259 vreg_l13a_2p95: ldo13 { 260 regulator-min-microvolt = <1800000>; 261 regulator-max-microvolt = <2960000>; 262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 263 }; 264 265 vreg_l14a_1p88: ldo14 { 266 regulator-min-microvolt = <1800000>; 267 regulator-max-microvolt = <1800000>; 268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 269 }; 270 271 vreg_l15a_1p8: ldo15 { 272 regulator-min-microvolt = <1800000>; 273 regulator-max-microvolt = <1800000>; 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 275 }; 276 277 vreg_l16a_2p7: ldo16 { 278 regulator-min-microvolt = <2704000>; 279 regulator-max-microvolt = <2704000>; 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 281 }; 282 283 vreg_l17a_1p3: ldo17 { 284 regulator-min-microvolt = <1304000>; 285 regulator-max-microvolt = <1304000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vreg_l18a_2p7: ldo18 { 290 regulator-min-microvolt = <2704000>; 291 regulator-max-microvolt = <2960000>; 292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 293 }; 294 295 vreg_l19a_3p0: ldo19 { 296 regulator-min-microvolt = <2856000>; 297 regulator-max-microvolt = <3104000>; 298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 299 }; 300 301 vreg_l20a_2p95: ldo20 { 302 regulator-min-microvolt = <2704000>; 303 regulator-max-microvolt = <2960000>; 304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 305 }; 306 307 vreg_l21a_2p95: ldo21 { 308 regulator-min-microvolt = <2704000>; 309 regulator-max-microvolt = <2960000>; 310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 311 }; 312 313 vreg_l22a_2p85: ldo22 { 314 regulator-min-microvolt = <2864000>; 315 regulator-max-microvolt = <3312000>; 316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 317 }; 318 319 vreg_l23a_3p3: ldo23 { 320 regulator-min-microvolt = <3000000>; 321 regulator-max-microvolt = <3312000>; 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 323 }; 324 325 vdda_qusb_hs0_3p1: 326 vreg_l24a_3p075: ldo24 { 327 regulator-min-microvolt = <3088000>; 328 regulator-max-microvolt = <3088000>; 329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 330 }; 331 332 vreg_l25a_3p3: ldo25 { 333 regulator-min-microvolt = <3300000>; 334 regulator-max-microvolt = <3312000>; 335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 336 }; 337 338 vdda_hp_pcie_1p2: 339 vdda_hv_ebi0: 340 vdda_hv_ebi1: 341 vdda_hv_ebi2: 342 vdda_hv_ebi3: 343 vdda_mipi_csi_1p25: 344 vdda_mipi_dsi0_1p2: 345 vdda_mipi_dsi1_1p2: 346 vdda_pcie_1p2: 347 vdda_ufs1_1p2: 348 vdda_ufs2_1p2: 349 vdda_usb1_ss_1p2: 350 vdda_usb2_ss_1p2: 351 vreg_l26a_1p2: ldo26 { 352 regulator-min-microvolt = <1200000>; 353 regulator-max-microvolt = <1200000>; 354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 355 }; 356 357 vreg_l28a_3p0: ldo28 { 358 regulator-min-microvolt = <2856000>; 359 regulator-max-microvolt = <3008000>; 360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 361 }; 362 363 vreg_lvs1a_1p8: lvs1 { 364 regulator-min-microvolt = <1800000>; 365 regulator-max-microvolt = <1800000>; 366 }; 367 368 vreg_lvs2a_1p8: lvs2 { 369 regulator-min-microvolt = <1800000>; 370 regulator-max-microvolt = <1800000>; 371 }; 372 }; 373 374 regulators-1 { 375 compatible = "qcom,pmi8998-rpmh-regulators"; 376 qcom,pmic-id = "b"; 377 378 vdd-bob-supply = <&vph_pwr>; 379 380 vreg_bob: bob { 381 regulator-min-microvolt = <3312000>; 382 regulator-max-microvolt = <3600000>; 383 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 384 regulator-allow-bypass; 385 }; 386 }; 387 388 regulators-2 { 389 compatible = "qcom,pm8005-rpmh-regulators"; 390 qcom,pmic-id = "c"; 391 392 vdd-s1-supply = <&vph_pwr>; 393 vdd-s2-supply = <&vph_pwr>; 394 vdd-s3-supply = <&vph_pwr>; 395 vdd-s4-supply = <&vph_pwr>; 396 397 vreg_s3c_0p6: smps3 { 398 regulator-min-microvolt = <600000>; 399 regulator-max-microvolt = <600000>; 400 }; 401 }; 402}; 403 404&cdsp_pas { 405 status = "okay"; 406 firmware-name = "qcom/sdm845/cdsp.mbn"; 407}; 408 409&gcc { 410 protected-clocks = <GCC_QSPI_CORE_CLK>, 411 <GCC_QSPI_CORE_CLK_SRC>, 412 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 413 <GCC_LPASS_Q6_AXI_CLK>, 414 <GCC_LPASS_SWAY_CLK>; 415}; 416 417&gmu { 418 status = "okay"; 419}; 420 421&gpu { 422 status = "okay"; 423 424 zap-shader { 425 memory-region = <&gpu_mem>; 426 firmware-name = "qcom/sdm845/a630_zap.mbn"; 427 }; 428}; 429 430&i2c10 { 431 status = "okay"; 432 clock-frequency = <400000>; 433}; 434 435&ipa { 436 qcom,gsi-loader = "self"; 437 memory-region = <&ipa_fw_mem>; 438 status = "okay"; 439}; 440 441&mdss { 442 status = "okay"; 443}; 444 445&mdss_dsi0 { 446 status = "okay"; 447 vdda-supply = <&vdda_mipi_dsi0_1p2>; 448 449 qcom,dual-dsi-mode; 450 qcom,master-dsi; 451 452 ports { 453 port@1 { 454 endpoint { 455 remote-endpoint = <&truly_in_0>; 456 data-lanes = <0 1 2 3>; 457 }; 458 }; 459 }; 460 461 panel@0 { 462 compatible = "truly,nt35597-2K-display"; 463 reg = <0>; 464 vdda-supply = <&vreg_l14a_1p88>; 465 466 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; 467 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; 468 469 ports { 470 #address-cells = <1>; 471 #size-cells = <0>; 472 473 port@0 { 474 reg = <0>; 475 truly_in_0: endpoint { 476 remote-endpoint = <&mdss_dsi0_out>; 477 }; 478 }; 479 480 port@1 { 481 reg = <1>; 482 truly_in_1: endpoint { 483 remote-endpoint = <&mdss_dsi1_out>; 484 }; 485 }; 486 }; 487 }; 488}; 489 490&mdss_dsi0_phy { 491 status = "okay"; 492 vdds-supply = <&vdda_mipi_dsi0_pll>; 493}; 494 495&mdss_dsi1 { 496 status = "okay"; 497 vdda-supply = <&vdda_mipi_dsi1_1p2>; 498 499 qcom,dual-dsi-mode; 500 501 /* DSI1 is slave, so use DSI0 clocks */ 502 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; 503 504 ports { 505 port@1 { 506 endpoint { 507 remote-endpoint = <&truly_in_1>; 508 data-lanes = <0 1 2 3>; 509 }; 510 }; 511 }; 512}; 513 514&mdss_dsi1_phy { 515 status = "okay"; 516 vdds-supply = <&vdda_mipi_dsi1_pll>; 517}; 518 519&mss_pil { 520 status = "okay"; 521 firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; 522}; 523 524&pcie0 { 525 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; 526 527 pinctrl-0 = <&pcie0_default_state>; 528 pinctrl-names = "default"; 529 530 status = "okay"; 531}; 532 533&pcie0_phy { 534 vdda-phy-supply = <&vreg_l1a_0p875>; 535 vdda-pll-supply = <&vreg_l26a_1p2>; 536 537 status = "okay"; 538}; 539 540&pcie1 { 541 perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; 542 543 pinctrl-names = "default"; 544 pinctrl-0 = <&pcie1_default_state>; 545 546 status = "okay"; 547}; 548 549&pcie1_phy { 550 status = "okay"; 551 552 vdda-phy-supply = <&vreg_l1a_0p875>; 553 vdda-pll-supply = <&vreg_l26a_1p2>; 554}; 555 556&pm8998_adc { 557 channel@4c { 558 reg = <ADC5_XO_THERM_100K_PU>; 559 label = "xo_therm"; 560 qcom,ratiometric; 561 qcom,hw-settle-time = <200>; 562 }; 563 564 channel@4d { 565 reg = <ADC5_AMUX_THM1_100K_PU>; 566 label = "msm_therm"; 567 qcom,ratiometric; 568 qcom,hw-settle-time = <200>; 569 }; 570 571 channel@4f { 572 reg = <ADC5_AMUX_THM3_100K_PU>; 573 label = "pa_therm1"; 574 qcom,ratiometric; 575 qcom,hw-settle-time = <200>; 576 }; 577 578 channel@51 { 579 reg = <ADC5_AMUX_THM5_100K_PU>; 580 label = "quiet_therm"; 581 qcom,ratiometric; 582 qcom,hw-settle-time = <200>; 583 }; 584 585 channel@83 { 586 reg = <ADC5_VPH_PWR>; 587 label = "vph_pwr"; 588 qcom,ratiometric; 589 qcom,hw-settle-time = <200>; 590 }; 591 592 channel@85 { 593 reg = <ADC5_VCOIN>; 594 label = "vcoin"; 595 qcom,ratiometric; 596 qcom,hw-settle-time = <200>; 597 }; 598}; 599 600&pm8998_adc_tm { 601 status = "okay"; 602 603 xo-thermistor@1 { 604 reg = <1>; 605 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>; 606 qcom,ratiometric; 607 qcom,hw-settle-time-us = <200>; 608 }; 609 610 msm-thermistor@2 { 611 reg = <2>; 612 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>; 613 qcom,ratiometric; 614 qcom,hw-settle-time-us = <200>; 615 }; 616 617 pa-thermistor@3 { 618 reg = <3>; 619 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>; 620 qcom,ratiometric; 621 qcom,hw-settle-time-us = <200>; 622 }; 623 624 quiet-thermistor@4 { 625 reg = <4>; 626 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>; 627 qcom,ratiometric; 628 qcom,hw-settle-time-us = <200>; 629 }; 630}; 631 632&pm8998_resin { 633 linux,code = <KEY_VOLUMEDOWN>; 634 status = "okay"; 635}; 636 637&qupv3_id_1 { 638 status = "okay"; 639}; 640 641&sdhc_2 { 642 status = "okay"; 643 644 pinctrl-names = "default"; 645 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; 646 647 vmmc-supply = <&vreg_l21a_2p95>; 648 vqmmc-supply = <&vddpx_2>; 649 650 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; 651}; 652 653&tlmm { 654 pcie0_default_state: pcie0-default-state { 655 clkreq-pins { 656 pins = "gpio36"; 657 function = "pci_e0"; 658 bias-pull-up; 659 }; 660 661 perst-n-pins { 662 pins = "gpio35"; 663 function = "gpio"; 664 drive-strength = <2>; 665 bias-pull-down; 666 }; 667 668 wake-n-pins { 669 pins = "gpio37"; 670 function = "gpio"; 671 drive-strength = <2>; 672 bias-pull-up; 673 }; 674 }; 675 676 pcie1_default_state: pcie1-default-state { 677 clkreq-pins { 678 pins = "gpio103"; 679 function = "pci_e1"; 680 bias-pull-up; 681 }; 682 683 perst-n-pins { 684 pins = "gpio102"; 685 function = "gpio"; 686 drive-strength = <16>; 687 bias-pull-down; 688 }; 689 690 wake-n-pins { 691 pins = "gpio104"; 692 function = "gpio"; 693 drive-strength = <2>; 694 bias-pull-up; 695 }; 696 }; 697}; 698 699&uart9 { 700 status = "okay"; 701}; 702 703&ufs_mem_hc { 704 status = "okay"; 705 706 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; 707 708 vcc-supply = <&vreg_l20a_2p95>; 709 vcc-max-microamp = <600000>; 710}; 711 712&ufs_mem_phy { 713 status = "okay"; 714 715 vdda-phy-supply = <&vdda_ufs1_core>; 716 vdda-pll-supply = <&vdda_ufs1_1p2>; 717}; 718 719&usb_1 { 720 status = "okay"; 721}; 722 723&usb_1_dwc3 { 724 /* Until we have Type C hooked up we'll force this as peripheral. */ 725 dr_mode = "peripheral"; 726}; 727 728&usb_1_hsphy { 729 status = "okay"; 730 731 vdd-supply = <&vdda_usb1_ss_core>; 732 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 733 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 734 735 qcom,imp-res-offset-value = <8>; 736 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; 737 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; 738 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; 739}; 740 741&usb_1_qmpphy { 742 status = "okay"; 743 744 vdda-phy-supply = <&vdda_usb1_ss_1p2>; 745 vdda-pll-supply = <&vdda_usb1_ss_core>; 746}; 747 748&usb_2 { 749 status = "okay"; 750}; 751 752&usb_2_dwc3 { 753 /* 754 * Though the USB block on SDM845 can support host, there's no vbus 755 * signal for this port on MTP. Thus (unless you have a non-compliant 756 * hub that works without vbus) the only sensible thing is to force 757 * peripheral mode. 758 */ 759 dr_mode = "peripheral"; 760}; 761 762&usb_2_hsphy { 763 status = "okay"; 764 765 vdd-supply = <&vdda_usb2_ss_core>; 766 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 767 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 768 769 qcom,imp-res-offset-value = <8>; 770 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; 771}; 772 773&usb_2_qmpphy { 774 status = "okay"; 775 776 vdda-phy-supply = <&vdda_usb2_ss_1p2>; 777 vdda-pll-supply = <&vdda_usb2_ss_core>; 778}; 779 780&venus { 781 status = "okay"; 782}; 783 784&wifi { 785 status = "okay"; 786 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; 787 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 788 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 789 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 790 791 qcom,snoc-host-cap-8bit-quirk; 792 qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp"; 793}; 794 795/* PINCTRL - additions to nodes defined in sdm845.dtsi */ 796 797&qup_i2c10_default { 798 drive-strength = <2>; 799 bias-disable; 800}; 801 802&qup_uart9_rx { 803 drive-strength = <2>; 804 bias-pull-up; 805}; 806 807&qup_uart9_tx { 808 drive-strength = <2>; 809 bias-disable; 810}; 811 812&tlmm { 813 gpio-reserved-ranges = <0 4>, <81 4>; 814 815 sdc2_clk: sdc2-clk-state { 816 pins = "sdc2_clk"; 817 bias-disable; 818 819 /* 820 * It seems that mmc_test reports errors if drive 821 * strength is not 16 on clk, cmd, and data pins. 822 */ 823 drive-strength = <16>; 824 }; 825 826 sdc2_cmd: sdc2-cmd-state { 827 pins = "sdc2_cmd"; 828 bias-pull-up; 829 drive-strength = <16>; 830 }; 831 832 sdc2_data: sdc2-data-state { 833 pins = "sdc2_data"; 834 bias-pull-up; 835 drive-strength = <16>; 836 }; 837 838 sd_card_det_n: sd-card-det-n-state { 839 pins = "gpio126"; 840 function = "gpio"; 841 bias-pull-up; 842 }; 843}; 844