1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Gabriela David 4 */ 5/dts-v1/; 6 7#include "sdm632.dtsi" 8#include "pm8953.dtsi" 9#include <dt-bindings/leds/common.h> 10 11/delete-node/ &cont_splash_mem; 12/delete-node/ &qseecom_mem; 13 14/ { 15 model = "Motorola G7 Power"; 16 compatible = "motorola,ocean", "qcom,sdm632"; 17 chassis-type = "handset"; 18 qcom,msm-id = <349 0>; 19 qcom,board-id = <0x141 0xc100>; 20 qcom,pmic-id = <0x10016 0x25 0x00 0x00>; 21 22 backlight: backlight { 23 compatible = "led-backlight"; 24 leds = <&led>; 25 }; 26 27 chosen { 28 #address-cells = <2>; 29 #size-cells = <2>; 30 ranges; 31 32 framebuffer@90001000 { 33 compatible = "simple-framebuffer"; 34 reg = <0 0x90001000 0 (720 * 1520 * 3)>; 35 36 width = <720>; 37 height = <1520>; 38 stride = <(720 * 3)>; 39 format = "r8g8b8"; 40 41 power-domains = <&gcc MDSS_GDSC>; 42 43 clocks = <&gcc GCC_MDSS_AHB_CLK>, 44 <&gcc GCC_MDSS_AXI_CLK>, 45 <&gcc GCC_MDSS_VSYNC_CLK>, 46 <&gcc GCC_MDSS_MDP_CLK>, 47 <&gcc GCC_MDSS_BYTE0_CLK>, 48 <&gcc GCC_MDSS_PCLK0_CLK>, 49 <&gcc GCC_MDSS_ESC0_CLK>; 50 }; 51 }; 52 53 gpio-keys { 54 compatible = "gpio-keys"; 55 56 pinctrl-names = "default"; 57 pinctrl-0 = <&gpio_key_default>; 58 59 key-volume-up { 60 label = "Volume Up"; 61 gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; 62 linux,code = <KEY_VOLUMEUP>; 63 }; 64 }; 65 66 reserved-memory { 67 qseecom_mem: qseecom@84300000 { 68 reg = <0x0 0x84300000 0x0 0x2000000>; 69 no-map; 70 }; 71 72 cont_splash_mem: cont-splash@90001000 { 73 reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>; 74 no-map; 75 }; 76 77 reserved@eefa1800 { 78 reg = <0x00 0xeefa1800 0x00 0x5e800>; 79 no-map; 80 }; 81 82 ramoops@ef000000 { 83 compatible = "ramoops"; 84 reg = <0x0 0xef000000 0x0 0xbf800>; 85 console-size = <0x40000>; 86 pmsg-size = <0x40000>; 87 record-size = <0x3f800>; 88 }; 89 }; 90 91 vph_pwr: vph-pwr-regulator { 92 compatible = "regulator-fixed"; 93 regulator-name = "vph_pwr"; 94 regulator-always-on; 95 regulator-boot-on; 96 }; 97}; 98 99&hsusb_phy { 100 vdd-supply = <&pm8953_l3>; 101 vdda-pll-supply = <&pm8953_l7>; 102 vdda-phy-dpdm-supply = <&pm8953_l13>; 103 104 status = "okay"; 105}; 106 107&i2c_3 { 108 status = "okay"; 109 110 touchscreen@41 { 111 compatible = "ilitek,ili2117"; 112 reg = <0x41>; 113 114 interrupt-parent = <&tlmm>; 115 interrupts = <65 IRQ_TYPE_EDGE_FALLING>; 116 117 touchscreen-inverted-x; 118 }; 119}; 120 121&i2c_5 { 122 status = "okay"; 123 124 led-controller@36 { 125 compatible = "ti,lm3697"; 126 reg = <0x36>; 127 128 #address-cells = <1>; 129 #size-cells = <0>; 130 131 led: led@1 { 132 reg = <1>; 133 default-trigger = "backlight"; 134 function = LED_FUNCTION_BACKLIGHT; 135 led-sources = <0 1 2>; 136 }; 137 }; 138}; 139 140&pm8953_resin { 141 linux,code = <KEY_VOLUMEDOWN>; 142 status = "okay"; 143}; 144 145&rpm_requests { 146 regulators { 147 compatible = "qcom,rpm-pm8953-regulators"; 148 149 vdd_l1-supply = <&pm8953_s3>; 150 vdd_l2_l3-supply = <&pm8953_s3>; 151 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; 152 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; 153 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; 154 155 pm8953_s3: s3 { 156 regulator-min-microvolt = <984000>; 157 regulator-max-microvolt = <1240000>; 158 }; 159 160 pm8953_s4: s4 { 161 regulator-min-microvolt = <1036000>; 162 regulator-max-microvolt = <2040000>; 163 }; 164 165 pm8953_l1: l1 { 166 regulator-min-microvolt = <975000>; 167 regulator-max-microvolt = <1050000>; 168 }; 169 170 pm8953_l2: l2 { 171 regulator-min-microvolt = <975000>; 172 regulator-max-microvolt = <1175000>; 173 }; 174 175 pm8953_l3: l3 { 176 regulator-min-microvolt = <925000>; 177 regulator-max-microvolt = <925000>; 178 regulator-allow-set-load; 179 }; 180 181 pm8953_l5: l5 { 182 regulator-min-microvolt = <1800000>; 183 regulator-max-microvolt = <1800000>; 184 }; 185 186 pm8953_l6: l6 { 187 regulator-min-microvolt = <1800000>; 188 regulator-max-microvolt = <1800000>; 189 regulator-always-on; 190 regulator-boot-on; 191 }; 192 193 pm8953_l7: l7 { 194 regulator-min-microvolt = <1800000>; 195 regulator-max-microvolt = <1900000>; 196 }; 197 198 pm8953_l8: l8 { 199 regulator-min-microvolt = <2900000>; 200 regulator-max-microvolt = <2900000>; 201 }; 202 203 pm8953_l9: l9 { 204 regulator-min-microvolt = <3000000>; 205 regulator-max-microvolt = <3300000>; 206 }; 207 208 pm8953_l10: l10 { 209 regulator-min-microvolt = <2800000>; 210 regulator-max-microvolt = <3000000>; 211 }; 212 213 pm8953_l11: l11 { 214 regulator-min-microvolt = <2950000>; 215 regulator-max-microvolt = <2950000>; 216 }; 217 218 pm8953_l12: l12 { 219 regulator-min-microvolt = <1800000>; 220 regulator-max-microvolt = <2950000>; 221 }; 222 223 pm8953_l13: l13 { 224 regulator-min-microvolt = <3125000>; 225 regulator-max-microvolt = <3125000>; 226 }; 227 228 pm8953_l16: l16 { 229 regulator-min-microvolt = <1800000>; 230 regulator-max-microvolt = <1800000>; 231 }; 232 233 pm8953_l17: l17 { 234 regulator-min-microvolt = <2850000>; 235 regulator-max-microvolt = <2850000>; 236 }; 237 238 pm8953_l18: l18 { 239 regulator-min-microvolt = <1800000>; 240 regulator-max-microvolt = <2700000>; 241 regulator-always-on; 242 regulator-boot-on; 243 }; 244 245 pm8953_l19: l19 { 246 regulator-min-microvolt = <1200000>; 247 regulator-max-microvolt = <1350000>; 248 }; 249 250 pm8953_l22: l22 { 251 regulator-min-microvolt = <1800000>; 252 regulator-max-microvolt = <1800000>; 253 regulator-always-on; 254 }; 255 256 pm8953_l23: l23 { 257 regulator-min-microvolt = <975000>; 258 regulator-max-microvolt = <1225000>; 259 }; 260 }; 261}; 262 263&sdhc_1 { 264 vmmc-supply = <&pm8953_l8>; 265 vqmmc-supply = <&pm8953_l5>; 266 267 status = "okay"; 268}; 269 270&sdhc_2 { 271 vmmc-supply = <&pm8953_l11>; 272 vqmmc-supply = <&pm8953_l12>; 273 274 pinctrl-names = "default", "sleep"; 275 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 276 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 277 278 status = "okay"; 279}; 280 281&tlmm { 282 gpio-reserved-ranges = <96 4>; 283}; 284 285&usb3 { 286 status = "okay"; 287}; 288 289&usb3_dwc3 { 290 dr_mode = "peripheral"; 291}; 292