xref: /freebsd/sys/contrib/device-tree/src/arm64/qcom/sc7280-crd-r3.dts (revision d5b0e70f7e04d971691517ce1304d86a1e367e2e)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * sc7280 CRD board device tree source
4 *
5 * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
6 */
7
8/dts-v1/;
9
10#include "sc7280-idp.dtsi"
11#include "sc7280-idp-ec-h1.dtsi"
12
13/ {
14	model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)";
15	compatible = "qcom,sc7280-crd",
16		     "google,hoglin-rev3", "google,hoglin-rev4",
17		     "google,piglin-rev3", "google,piglin-rev4",
18		     "qcom,sc7280";
19
20	aliases {
21		serial0 = &uart5;
22	};
23
24	chosen {
25		stdout-path = "serial0:115200n8";
26	};
27};
28
29&apps_rsc {
30	pmg1110-regulators {
31		compatible = "qcom,pmg1110-rpmh-regulators";
32		qcom,pmic-id = "k";
33
34		vreg_s1k_1p0: smps1 {
35			regulator-min-microvolt = <1010000>;
36			regulator-max-microvolt = <1170000>;
37		};
38	};
39};
40
41ap_tp_i2c: &i2c0 {
42	status = "okay";
43	clock-frequency = <400000>;
44
45	trackpad: trackpad@15 {
46		compatible = "hid-over-i2c";
47		reg = <0x15>;
48		pinctrl-names = "default";
49		pinctrl-0 = <&tp_int_odl>;
50
51		interrupt-parent = <&tlmm>;
52		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
53
54		post-power-on-delay-ms = <20>;
55		hid-descr-addr = <0x0001>;
56		vdd-supply = <&vreg_l18b_1p8>;
57
58		wakeup-source;
59	};
60};
61
62ap_ts_pen_1v8: &i2c13 {
63	status = "okay";
64	clock-frequency = <400000>;
65
66	ap_ts: touchscreen@5c {
67		compatible = "hid-over-i2c";
68		reg = <0x5c>;
69		pinctrl-names = "default";
70		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
71
72		interrupt-parent = <&tlmm>;
73		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
74
75		post-power-on-delay-ms = <500>;
76		hid-descr-addr = <0x0000>;
77
78		vdd-supply = <&vreg_l19b_1p8>;
79	};
80};
81
82&nvme_3v3_regulator {
83	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
84};
85
86&nvme_pwren {
87	pins = "gpio51";
88};
89
90&tlmm {
91	tp_int_odl: tp-int-odl {
92		pins = "gpio7";
93		function = "gpio";
94		bias-disable;
95	};
96
97	ts_int_l: ts-int-l {
98		pins = "gpio55";
99		function = "gpio";
100		bias-pull-up;
101	};
102
103	ts_reset_l: ts-reset-l {
104		pins = "gpio54";
105		function = "gpio";
106		bias-disable;
107	};
108};
109