xref: /freebsd/sys/contrib/device-tree/src/arm64/qcom/sc7180-trogdor-pompom.dtsi (revision 716fd348e01c5f2ba125f878a634a753436c2994) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Google Pompom board device tree source
4 *
5 * Copyright 2020 Google LLC.
6 */
7
8#include "sc7180.dtsi"
9
10ap_ec_spi: &spi6 {};
11ap_h1_spi: &spi0 {};
12
13#include "sc7180-trogdor.dtsi"
14
15/ {
16	thermal-zones {
17		5v-choke-thermal {
18			polling-delay-passive = <0>;
19			polling-delay = <250>;
20
21			thermal-sensors = <&pm6150_adc_tm 1>;
22
23			trips {
24				5v-choke-crit {
25					temperature = <125000>;
26					hysteresis = <1000>;
27					type = "critical";
28				};
29			};
30		};
31	};
32};
33
34&alc5682 {
35	realtek,dmic-clk-driving-high = "true";
36};
37
38&cpu6_alert0 {
39	temperature = <60000>;
40};
41
42&cpu6_alert1 {
43	temperature = <65000>;
44};
45
46&cpu6_thermal {
47	sustainable-power = <948>;
48};
49
50&cpu7_alert0 {
51	temperature = <60000>;
52};
53
54&cpu7_alert1 {
55	temperature = <65000>;
56};
57
58&cpu7_thermal {
59	sustainable-power = <948>;
60};
61
62&cpu8_alert0 {
63	temperature = <60000>;
64};
65
66&cpu8_alert1 {
67	temperature = <65000>;
68};
69
70&cpu8_thermal {
71	sustainable-power = <948>;
72};
73
74&cpu9_alert0 {
75	temperature = <60000>;
76};
77
78&cpu9_alert1 {
79	temperature = <65000>;
80};
81
82&cpu9_thermal {
83	sustainable-power = <948>;
84};
85
86&gpio_keys {
87	status = "okay";
88};
89
90ap_ts_pen_1v8: &i2c4 {
91	status = "okay";
92	clock-frequency = <400000>;
93
94	ap_ts: touchscreen@10 {
95		compatible = "hid-over-i2c";
96		reg = <0x10>;
97		pinctrl-names = "default";
98		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
99
100		interrupt-parent = <&tlmm>;
101		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
102
103		post-power-on-delay-ms = <20>;
104		hid-descr-addr = <0x0001>;
105
106		vdd-supply = <&pp3300_ts>;
107	};
108};
109
110&panel {
111	compatible = "kingdisplay,kd116n21-30nv-a010";
112};
113
114&pen_insert {
115	/* Insert = high, eject = low */
116	gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
117};
118
119&pm6150_adc {
120	5v-choke-thermistor@4e {
121		reg = <ADC5_AMUX_THM2_100K_PU>;
122		qcom,ratiometric;
123		qcom,hw-settle-time = <200>;
124	};
125};
126
127&pm6150_adc_tm {
128	status = "okay";
129
130	5v-choke-thermistor@1 {
131		reg = <1>;
132		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
133		qcom,ratiometric;
134		qcom,hw-settle-time-us = <200>;
135	};
136};
137
138&sdhc_2 {
139	status = "okay";
140};
141
142&sound {
143	model = "sc7180-rt5682-max98357a-2mic";
144	pinctrl-names = "default";
145	pinctrl-0 = <&dmic_sel>;
146	dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
147};
148
149&usb_c1 {
150	status = "disabled";
151};
152
153&wifi {
154	qcom,ath10k-calibration-variant = "GO_POMPOM";
155};
156
157/* PINCTRL - board-specific pinctrl */
158
159&tlmm {
160	gpio-line-names = "TP_INT_ODL",
161			  "AP_RAM_ID0",
162			  "AP_SKU_ID2",
163			  "AP_RAM_ID1",
164			  "",
165			  "AP_RAM_ID2",
166			  "AP_TP_I2C_SDA",
167			  "AP_TP_I2C_SCL",
168			  "TS_RESET_L",
169			  "TS_INT_L",
170			  "",
171			  "EDP_BRIJ_IRQ",
172			  "AP_EDP_BKLTEN",
173			  "",
174			  "",
175			  "EDP_BRIJ_I2C_SDA",
176			  "EDP_BRIJ_I2C_SCL",
177			  "HUB_RST_L",
178			  "",
179			  "",
180			  "",
181			  "",
182			  "",
183			  "AMP_EN",
184			  "P_SENSOR_INT_L",
185			  "AP_SAR_SENSOR_SDA",
186			  "AP_SAR_SENSOR_SCL",
187			  "",
188			  "HP_IRQ",
189			  "",
190			  "EN_PP3300_DX_EDP",
191			  "AP_BRD_ID2",
192			  "BRIJ_SUSPEND",
193			  "AP_BRD_ID0",
194			  "AP_H1_SPI_MISO",
195			  "AP_H1_SPI_MOSI",
196			  "AP_H1_SPI_CLK",
197			  "AP_H1_SPI_CS_L",
198			  "",
199			  "",
200			  "",
201			  "",
202			  "H1_AP_INT_ODL",
203			  "",
204			  "UART_AP_TX_DBG_RX",
205			  "UART_DBG_TX_AP_RX",
206			  "HP_I2C_SDA",
207			  "HP_I2C_SCL",
208			  "FORCED_USB_BOOT",
209			  "AMP_BCLK",
210			  "AMP_LRCLK",
211			  "AMP_DIN",
212			  "PEN_PDCT_L",
213			  "HP_BCLK",
214			  "HP_LRCLK",
215			  "HP_DOUT",
216			  "HP_DIN",
217			  "HP_MCLK",
218			  "AP_SKU_ID0",
219			  "AP_EC_SPI_MISO",
220			  "AP_EC_SPI_MOSI",
221			  "AP_EC_SPI_CLK",
222			  "AP_EC_SPI_CS_L",
223			  "AP_SPI_CLK",
224			  "AP_SPI_MOSI",
225			  "AP_SPI_MISO",
226			  /*
227			   * AP_FLASH_WP_L is crossystem ABI. Schematics
228			   * call it BIOS_FLASH_WP_L.
229			   */
230			  "AP_FLASH_WP_L",
231			  "",
232			  "AP_SPI_CS0_L",
233			  "SD_CD_ODL",
234			  "",
235			  "",
236			  "",
237			  "",
238			  "",
239			  "UIM2_DATA",
240			  "UIM2_CLK",
241			  "UIM2_RST",
242			  "UIM2_PRESENT",
243			  "UIM1_DATA",
244			  "UIM1_CLK",
245			  "UIM1_RST",
246			  "",
247			  "EN_PP3300_CODEC",
248			  "EN_PP3300_HUB",
249			  "",
250			  "DMIC_SEL",
251			  "",
252			  "",
253			  "",
254			  "AP_SKU_ID1",
255			  "AP_RST_REQ",
256			  "",
257			  "AP_BRD_ID1",
258			  "AP_EC_INT_R_L",
259			  "",
260			  "",
261			  "",
262			  "",
263			  "",
264			  "",
265			  "",
266			  "",
267			  "",
268			  "EDP_BRIJ_EN",
269			  "",
270			  "",
271			  "",
272			  "",
273			  "",
274			  "",
275			  "",
276			  "",
277			  "",
278			  "",
279			  "AP_TS_PEN_I2C_SDA",
280			  "AP_TS_PEN_I2C_SCL",
281			  "DP_HOT_PLUG_DET",
282			  "EC_IN_RW_ODL";
283
284	dmic_sel: dmic-sel {
285		pinmux {
286			pins = "gpio86";
287			function = "gpio";
288		};
289
290		pinconf {
291			pins = "gpio86";
292			bias-pull-down;
293		};
294	};
295};
296