1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, The Linux Foundation. All rights reserved. 4 * Copyright (c) 2022, Linaro Limited 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11#include <dt-bindings/spmi/spmi.h> 12 13#include "sa8540p.dtsi" 14 15/ { 16 model = "Qualcomm SA8295P ADP"; 17 compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; 18 19 aliases { 20 serial0 = &qup2_uart17; 21 }; 22 23 chosen { 24 stdout-path = "serial0:115200n8"; 25 }; 26}; 27 28&apps_rsc { 29 pmm8540-a-regulators { 30 compatible = "qcom,pm8150-rpmh-regulators"; 31 qcom,pmic-id = "a"; 32 33 vreg_l3a: ldo3 { 34 regulator-name = "vreg_l3a"; 35 regulator-min-microvolt = <1200000>; 36 regulator-max-microvolt = <1208000>; 37 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 38 regulator-allow-set-load; 39 }; 40 41 vreg_l5a: ldo5 { 42 regulator-name = "vreg_l5a"; 43 regulator-min-microvolt = <912000>; 44 regulator-max-microvolt = <912000>; 45 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 46 regulator-allow-set-load; 47 }; 48 49 vreg_l7a: ldo7 { 50 regulator-name = "vreg_l7a"; 51 regulator-min-microvolt = <1800000>; 52 regulator-max-microvolt = <1800000>; 53 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 54 regulator-allow-set-load; 55 }; 56 57 vreg_l13a: ldo13 { 58 regulator-name = "vreg_l13a"; 59 regulator-min-microvolt = <3072000>; 60 regulator-max-microvolt = <3072000>; 61 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 62 regulator-allow-set-load; 63 }; 64 }; 65 66 pmm8540-c-regulators { 67 compatible = "qcom,pm8150-rpmh-regulators"; 68 qcom,pmic-id = "c"; 69 70 vreg_l1c: ldo1 { 71 regulator-name = "vreg_l1c"; 72 regulator-min-microvolt = <912000>; 73 regulator-max-microvolt = <912000>; 74 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 75 regulator-allow-set-load; 76 }; 77 78 vreg_l2c: ldo2 { 79 regulator-name = "vreg_l2c"; 80 regulator-min-microvolt = <3072000>; 81 regulator-max-microvolt = <3072000>; 82 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 83 regulator-allow-set-load; 84 }; 85 86 vreg_l3c: ldo3 { 87 regulator-name = "vreg_l3c"; 88 regulator-min-microvolt = <1200000>; 89 regulator-max-microvolt = <1200000>; 90 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 91 regulator-allow-set-load; 92 }; 93 94 vreg_l4c: ldo4 { 95 regulator-name = "vreg_l4c"; 96 regulator-min-microvolt = <1200000>; 97 regulator-max-microvolt = <1208000>; 98 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 99 regulator-allow-set-load; 100 }; 101 102 vreg_l6c: ldo6 { 103 regulator-name = "vreg_l6c"; 104 regulator-min-microvolt = <1200000>; 105 regulator-max-microvolt = <1200000>; 106 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 107 regulator-allow-set-load; 108 }; 109 110 vreg_l7c: ldo7 { 111 regulator-name = "vreg_l7c"; 112 regulator-min-microvolt = <1800000>; 113 regulator-max-microvolt = <1800000>; 114 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 115 regulator-allow-set-load; 116 }; 117 118 vreg_l10c: ldo10 { 119 regulator-name = "vreg_l10c"; 120 regulator-min-microvolt = <2504000>; 121 regulator-max-microvolt = <2504000>; 122 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 123 regulator-allow-set-load; 124 }; 125 126 vreg_l17c: ldo17 { 127 regulator-name = "vreg_l17c"; 128 regulator-min-microvolt = <2504000>; 129 regulator-max-microvolt = <2504000>; 130 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 131 regulator-allow-set-load; 132 }; 133 }; 134 135 pmm8540-g-regulators { 136 compatible = "qcom,pm8150-rpmh-regulators"; 137 qcom,pmic-id = "g"; 138 139 vreg_l3g: ldo3 { 140 regulator-name = "vreg_l3g"; 141 regulator-min-microvolt = <1200000>; 142 regulator-max-microvolt = <1200000>; 143 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 144 regulator-allow-set-load; 145 }; 146 147 vreg_l7g: ldo7 { 148 regulator-name = "vreg_l7g"; 149 regulator-min-microvolt = <1800000>; 150 regulator-max-microvolt = <1800000>; 151 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 152 regulator-allow-set-load; 153 }; 154 155 vreg_l8g: ldo8 { 156 regulator-name = "vreg_l8g"; 157 regulator-min-microvolt = <880000>; 158 regulator-max-microvolt = <880000>; 159 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 160 regulator-allow-set-load; 161 }; 162 }; 163}; 164 165&qup2 { 166 status = "okay"; 167}; 168 169&qup2_uart17 { 170 compatible = "qcom,geni-debug-uart"; 171 status = "okay"; 172}; 173 174&remoteproc_adsp { 175 firmware-name = "qcom/sa8540p/adsp.mbn"; 176 status = "okay"; 177}; 178 179&remoteproc_nsp0 { 180 firmware-name = "qcom/sa8540p/cdsp.mbn"; 181 status = "okay"; 182}; 183 184&remoteproc_nsp1 { 185 firmware-name = "qcom/sa8540p/cdsp1.mbn"; 186 status = "okay"; 187}; 188 189&spmi_bus { 190 pm8450a: pmic@0 { 191 compatible = "qcom,pm8150", "qcom,spmi-pmic"; 192 reg = <0x0 SPMI_USID>; 193 #address-cells = <1>; 194 #size-cells = <0>; 195 196 pm8450a_gpios: gpio@c000 { 197 compatible = "qcom,pm8150-gpio"; 198 reg = <0xc000>; 199 gpio-controller; 200 #gpio-cells = <2>; 201 interrupt-controller; 202 #interrupt-cells = <2>; 203 }; 204 }; 205 206 pm8450c: pmic@4 { 207 compatible = "qcom,pm8150", "qcom,spmi-pmic"; 208 reg = <0x4 SPMI_USID>; 209 #address-cells = <1>; 210 #size-cells = <0>; 211 212 pm8450c_gpios: gpio@c000 { 213 compatible = "qcom,pm8150-gpio"; 214 reg = <0xc000>; 215 gpio-controller; 216 #gpio-cells = <2>; 217 interrupt-controller; 218 #interrupt-cells = <2>; 219 }; 220 }; 221 222 pm8450e: pmic@8 { 223 compatible = "qcom,pm8150", "qcom,spmi-pmic"; 224 reg = <0x8 SPMI_USID>; 225 #address-cells = <1>; 226 #size-cells = <0>; 227 228 pm8450e_gpios: gpio@c000 { 229 compatible = "qcom,pm8150-gpio"; 230 reg = <0xc000>; 231 gpio-controller; 232 #gpio-cells = <2>; 233 interrupt-controller; 234 #interrupt-cells = <2>; 235 }; 236 }; 237 238 pm8450g: pmic@c { 239 compatible = "qcom,pm8150", "qcom,spmi-pmic"; 240 reg = <0xc SPMI_USID>; 241 #address-cells = <1>; 242 #size-cells = <0>; 243 244 pm8450g_gpios: gpio@c000 { 245 compatible = "qcom,pm8150-gpio"; 246 reg = <0xc000>; 247 gpio-controller; 248 #gpio-cells = <2>; 249 interrupt-controller; 250 #interrupt-cells = <2>; 251 }; 252 }; 253}; 254 255&ufs_mem_hc { 256 reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; 257 258 vcc-supply = <&vreg_l17c>; 259 vcc-max-microamp = <800000>; 260 vccq-supply = <&vreg_l6c>; 261 vccq-max-microamp = <900000>; 262 263 status = "okay"; 264}; 265 266&ufs_mem_phy { 267 vdda-phy-supply = <&vreg_l8g>; 268 vdda-pll-supply = <&vreg_l3g>; 269 270 status = "okay"; 271}; 272 273&ufs_card_hc { 274 reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; 275 276 vcc-supply = <&vreg_l10c>; 277 vcc-max-microamp = <800000>; 278 vccq-supply = <&vreg_l3c>; 279 vccq-max-microamp = <900000>; 280 281 status = "okay"; 282}; 283 284&ufs_card_phy { 285 vdda-phy-supply = <&vreg_l8g>; 286 vdda-pll-supply = <&vreg_l3g>; 287 288 status = "okay"; 289}; 290 291&usb_0 { 292 status = "okay"; 293}; 294 295&usb_0_dwc3 { 296 /* TODO: Define USB-C connector properly */ 297 dr_mode = "peripheral"; 298}; 299 300&usb_0_hsphy { 301 vdda-pll-supply = <&vreg_l5a>; 302 vdda18-supply = <&vreg_l7a>; 303 vdda33-supply = <&vreg_l13a>; 304 305 status = "okay"; 306}; 307 308&usb_0_qmpphy { 309 vdda-phy-supply = <&vreg_l3a>; 310 vdda-pll-supply = <&vreg_l5a>; 311 312 status = "okay"; 313}; 314 315&usb_1 { 316 status = "okay"; 317}; 318 319&usb_1_dwc3 { 320 /* TODO: Define USB-C connector properly */ 321 dr_mode = "host"; 322}; 323 324&usb_1_hsphy { 325 vdda-pll-supply = <&vreg_l1c>; 326 vdda18-supply = <&vreg_l7c>; 327 vdda33-supply = <&vreg_l2c>; 328 329 status = "okay"; 330}; 331 332&usb_1_qmpphy { 333 vdda-phy-supply = <&vreg_l4c>; 334 vdda-pll-supply = <&vreg_l1c>; 335 336 status = "okay"; 337}; 338 339&usb_2_hsphy0 { 340 vdda-pll-supply = <&vreg_l5a>; 341 vdda18-supply = <&vreg_l7g>; 342 vdda33-supply = <&vreg_l13a>; 343 344 status = "okay"; 345}; 346 347&usb_2_hsphy1 { 348 vdda-pll-supply = <&vreg_l5a>; 349 vdda18-supply = <&vreg_l7g>; 350 vdda33-supply = <&vreg_l13a>; 351 352 status = "okay"; 353}; 354 355&usb_2_hsphy2 { 356 vdda-pll-supply = <&vreg_l5a>; 357 vdda18-supply = <&vreg_l7g>; 358 vdda33-supply = <&vreg_l13a>; 359 360 status = "okay"; 361}; 362 363&usb_2_hsphy3 { 364 vdda-pll-supply = <&vreg_l5a>; 365 vdda18-supply = <&vreg_l7g>; 366 vdda33-supply = <&vreg_l13a>; 367 368 status = "okay"; 369}; 370 371&usb_2_qmpphy0 { 372 vdda-phy-supply = <&vreg_l3a>; 373 vdda-pll-supply = <&vreg_l5a>; 374 375 status = "okay"; 376}; 377 378&usb_2_qmpphy1 { 379 vdda-phy-supply = <&vreg_l3a>; 380 vdda-pll-supply = <&vreg_l5a>; 381 382 status = "okay"; 383}; 384 385&xo_board_clk { 386 clock-frequency = <38400000>; 387}; 388 389/* PINCTRL */ 390