1// SPDX-License-Identifier: GPL-2.0 2// Copyright (c) 2018, Linaro Limited 3 4#include <dt-bindings/interrupt-controller/arm-gic.h> 5#include <dt-bindings/clock/qcom,gcc-qcs404.h> 6#include <dt-bindings/clock/qcom,turingcc-qcs404.h> 7#include <dt-bindings/clock/qcom,rpmcc.h> 8#include <dt-bindings/power/qcom-rpmpd.h> 9#include <dt-bindings/thermal/thermal.h> 10 11/ { 12 interrupt-parent = <&intc>; 13 14 #address-cells = <2>; 15 #size-cells = <2>; 16 17 chosen { }; 18 19 clocks { 20 xo_board: xo-board { 21 compatible = "fixed-clock"; 22 #clock-cells = <0>; 23 clock-frequency = <19200000>; 24 }; 25 26 sleep_clk: sleep-clk { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <32768>; 30 }; 31 }; 32 33 cpus { 34 #address-cells = <1>; 35 #size-cells = <0>; 36 37 CPU0: cpu@100 { 38 device_type = "cpu"; 39 compatible = "arm,cortex-a53"; 40 reg = <0x100>; 41 enable-method = "psci"; 42 cpu-idle-states = <&CPU_SLEEP_0>; 43 next-level-cache = <&L2_0>; 44 #cooling-cells = <2>; 45 clocks = <&apcs_glb>; 46 operating-points-v2 = <&cpu_opp_table>; 47 power-domains = <&cpr>; 48 power-domain-names = "cpr"; 49 }; 50 51 CPU1: cpu@101 { 52 device_type = "cpu"; 53 compatible = "arm,cortex-a53"; 54 reg = <0x101>; 55 enable-method = "psci"; 56 cpu-idle-states = <&CPU_SLEEP_0>; 57 next-level-cache = <&L2_0>; 58 #cooling-cells = <2>; 59 clocks = <&apcs_glb>; 60 operating-points-v2 = <&cpu_opp_table>; 61 power-domains = <&cpr>; 62 power-domain-names = "cpr"; 63 }; 64 65 CPU2: cpu@102 { 66 device_type = "cpu"; 67 compatible = "arm,cortex-a53"; 68 reg = <0x102>; 69 enable-method = "psci"; 70 cpu-idle-states = <&CPU_SLEEP_0>; 71 next-level-cache = <&L2_0>; 72 #cooling-cells = <2>; 73 clocks = <&apcs_glb>; 74 operating-points-v2 = <&cpu_opp_table>; 75 power-domains = <&cpr>; 76 power-domain-names = "cpr"; 77 }; 78 79 CPU3: cpu@103 { 80 device_type = "cpu"; 81 compatible = "arm,cortex-a53"; 82 reg = <0x103>; 83 enable-method = "psci"; 84 cpu-idle-states = <&CPU_SLEEP_0>; 85 next-level-cache = <&L2_0>; 86 #cooling-cells = <2>; 87 clocks = <&apcs_glb>; 88 operating-points-v2 = <&cpu_opp_table>; 89 power-domains = <&cpr>; 90 power-domain-names = "cpr"; 91 }; 92 93 L2_0: l2-cache { 94 compatible = "cache"; 95 cache-level = <2>; 96 }; 97 98 idle-states { 99 entry-method = "psci"; 100 101 CPU_SLEEP_0: cpu-sleep-0 { 102 compatible = "arm,idle-state"; 103 idle-state-name = "standalone-power-collapse"; 104 arm,psci-suspend-param = <0x40000003>; 105 entry-latency-us = <125>; 106 exit-latency-us = <180>; 107 min-residency-us = <595>; 108 local-timer-stop; 109 }; 110 }; 111 }; 112 113 cpu_opp_table: cpu-opp-table { 114 compatible = "operating-points-v2-kryo-cpu"; 115 opp-shared; 116 117 opp-1094400000 { 118 opp-hz = /bits/ 64 <1094400000>; 119 required-opps = <&cpr_opp1>; 120 }; 121 opp-1248000000 { 122 opp-hz = /bits/ 64 <1248000000>; 123 required-opps = <&cpr_opp2>; 124 }; 125 opp-1401600000 { 126 opp-hz = /bits/ 64 <1401600000>; 127 required-opps = <&cpr_opp3>; 128 }; 129 }; 130 131 cpr_opp_table: cpr-opp-table { 132 compatible = "operating-points-v2-qcom-level"; 133 134 cpr_opp1: opp1 { 135 opp-level = <1>; 136 qcom,opp-fuse-level = <1>; 137 }; 138 cpr_opp2: opp2 { 139 opp-level = <2>; 140 qcom,opp-fuse-level = <2>; 141 }; 142 cpr_opp3: opp3 { 143 opp-level = <3>; 144 qcom,opp-fuse-level = <3>; 145 }; 146 }; 147 148 firmware { 149 scm: scm { 150 compatible = "qcom,scm-qcs404", "qcom,scm"; 151 #reset-cells = <1>; 152 }; 153 }; 154 155 memory@80000000 { 156 device_type = "memory"; 157 /* We expect the bootloader to fill in the size */ 158 reg = <0 0x80000000 0 0>; 159 }; 160 161 psci { 162 compatible = "arm,psci-1.0"; 163 method = "smc"; 164 }; 165 166 reserved-memory { 167 #address-cells = <2>; 168 #size-cells = <2>; 169 ranges; 170 171 tz_apps_mem: memory@85900000 { 172 reg = <0 0x85900000 0 0x500000>; 173 no-map; 174 }; 175 176 xbl_mem: memory@85e00000 { 177 reg = <0 0x85e00000 0 0x100000>; 178 no-map; 179 }; 180 181 smem_region: memory@85f00000 { 182 reg = <0 0x85f00000 0 0x200000>; 183 no-map; 184 }; 185 186 tz_mem: memory@86100000 { 187 reg = <0 0x86100000 0 0x300000>; 188 no-map; 189 }; 190 191 wlan_fw_mem: memory@86400000 { 192 reg = <0 0x86400000 0 0x1100000>; 193 no-map; 194 }; 195 196 adsp_fw_mem: memory@87500000 { 197 reg = <0 0x87500000 0 0x1a00000>; 198 no-map; 199 }; 200 201 cdsp_fw_mem: memory@88f00000 { 202 reg = <0 0x88f00000 0 0x600000>; 203 no-map; 204 }; 205 206 wlan_msa_mem: memory@89500000 { 207 reg = <0 0x89500000 0 0x100000>; 208 no-map; 209 }; 210 211 uefi_mem: memory@9f800000 { 212 reg = <0 0x9f800000 0 0x800000>; 213 no-map; 214 }; 215 }; 216 217 rpm-glink { 218 compatible = "qcom,glink-rpm"; 219 220 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 221 qcom,rpm-msg-ram = <&rpm_msg_ram>; 222 mboxes = <&apcs_glb 0>; 223 224 rpm_requests: glink-channel { 225 compatible = "qcom,rpm-qcs404"; 226 qcom,glink-channels = "rpm_requests"; 227 228 rpmcc: clock-controller { 229 compatible = "qcom,rpmcc-qcs404"; 230 #clock-cells = <1>; 231 }; 232 233 rpmpd: power-controller { 234 compatible = "qcom,qcs404-rpmpd"; 235 #power-domain-cells = <1>; 236 operating-points-v2 = <&rpmpd_opp_table>; 237 238 rpmpd_opp_table: opp-table { 239 compatible = "operating-points-v2"; 240 241 rpmpd_opp_ret: opp1 { 242 opp-level = <16>; 243 }; 244 245 rpmpd_opp_ret_plus: opp2 { 246 opp-level = <32>; 247 }; 248 249 rpmpd_opp_min_svs: opp3 { 250 opp-level = <48>; 251 }; 252 253 rpmpd_opp_low_svs: opp4 { 254 opp-level = <64>; 255 }; 256 257 rpmpd_opp_svs: opp5 { 258 opp-level = <128>; 259 }; 260 261 rpmpd_opp_svs_plus: opp6 { 262 opp-level = <192>; 263 }; 264 265 rpmpd_opp_nom: opp7 { 266 opp-level = <256>; 267 }; 268 269 rpmpd_opp_nom_plus: opp8 { 270 opp-level = <320>; 271 }; 272 273 rpmpd_opp_turbo: opp9 { 274 opp-level = <384>; 275 }; 276 277 rpmpd_opp_turbo_no_cpr: opp10 { 278 opp-level = <416>; 279 }; 280 281 rpmpd_opp_turbo_plus: opp11 { 282 opp-level = <512>; 283 }; 284 }; 285 }; 286 }; 287 }; 288 289 smem { 290 compatible = "qcom,smem"; 291 292 memory-region = <&smem_region>; 293 qcom,rpm-msg-ram = <&rpm_msg_ram>; 294 295 hwlocks = <&tcsr_mutex 3>; 296 }; 297 298 tcsr_mutex: hwlock { 299 compatible = "qcom,tcsr-mutex"; 300 syscon = <&tcsr_mutex_regs 0 0x1000>; 301 #hwlock-cells = <1>; 302 }; 303 304 soc: soc@0 { 305 #address-cells = <1>; 306 #size-cells = <1>; 307 ranges = <0 0 0 0xffffffff>; 308 compatible = "simple-bus"; 309 310 turingcc: clock-controller@800000 { 311 compatible = "qcom,qcs404-turingcc"; 312 reg = <0x00800000 0x30000>; 313 clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; 314 315 #clock-cells = <1>; 316 #reset-cells = <1>; 317 318 status = "disabled"; 319 }; 320 321 rpm_msg_ram: memory@60000 { 322 compatible = "qcom,rpm-msg-ram"; 323 reg = <0x00060000 0x6000>; 324 }; 325 326 usb3_phy: phy@78000 { 327 compatible = "qcom,usb-ss-28nm-phy"; 328 reg = <0x00078000 0x400>; 329 #phy-cells = <0>; 330 clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, 331 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, 332 <&gcc GCC_USB3_PHY_PIPE_CLK>; 333 clock-names = "ref", "ahb", "pipe"; 334 resets = <&gcc GCC_USB3_PHY_BCR>, 335 <&gcc GCC_USB3PHY_PHY_BCR>; 336 reset-names = "com", "phy"; 337 status = "disabled"; 338 }; 339 340 usb2_phy_prim: phy@7a000 { 341 compatible = "qcom,usb-hs-28nm-femtophy"; 342 reg = <0x0007a000 0x200>; 343 #phy-cells = <0>; 344 clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, 345 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, 346 <&gcc GCC_USB2A_PHY_SLEEP_CLK>; 347 clock-names = "ref", "ahb", "sleep"; 348 resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, 349 <&gcc GCC_USB2A_PHY_BCR>; 350 reset-names = "phy", "por"; 351 status = "disabled"; 352 }; 353 354 usb2_phy_sec: phy@7c000 { 355 compatible = "qcom,usb-hs-28nm-femtophy"; 356 reg = <0x0007c000 0x200>; 357 #phy-cells = <0>; 358 clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, 359 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, 360 <&gcc GCC_USB2A_PHY_SLEEP_CLK>; 361 clock-names = "ref", "ahb", "sleep"; 362 resets = <&gcc GCC_QUSB2_PHY_BCR>, 363 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; 364 reset-names = "phy", "por"; 365 status = "disabled"; 366 }; 367 368 qfprom: qfprom@a4000 { 369 compatible = "qcom,qfprom"; 370 reg = <0x000a4000 0x1000>; 371 #address-cells = <1>; 372 #size-cells = <1>; 373 tsens_caldata: caldata@d0 { 374 reg = <0x1f8 0x14>; 375 }; 376 cpr_efuse_speedbin: speedbin@13c { 377 reg = <0x13c 0x4>; 378 bits = <2 3>; 379 }; 380 cpr_efuse_quot_offset1: qoffset1@231 { 381 reg = <0x231 0x4>; 382 bits = <4 7>; 383 }; 384 cpr_efuse_quot_offset2: qoffset2@232 { 385 reg = <0x232 0x4>; 386 bits = <3 7>; 387 }; 388 cpr_efuse_quot_offset3: qoffset3@233 { 389 reg = <0x233 0x4>; 390 bits = <2 7>; 391 }; 392 cpr_efuse_init_voltage1: ivoltage1@229 { 393 reg = <0x229 0x4>; 394 bits = <4 6>; 395 }; 396 cpr_efuse_init_voltage2: ivoltage2@22a { 397 reg = <0x22a 0x4>; 398 bits = <2 6>; 399 }; 400 cpr_efuse_init_voltage3: ivoltage3@22b { 401 reg = <0x22b 0x4>; 402 bits = <0 6>; 403 }; 404 cpr_efuse_quot1: quot1@22b { 405 reg = <0x22b 0x4>; 406 bits = <6 12>; 407 }; 408 cpr_efuse_quot2: quot2@22d { 409 reg = <0x22d 0x4>; 410 bits = <2 12>; 411 }; 412 cpr_efuse_quot3: quot3@230 { 413 reg = <0x230 0x4>; 414 bits = <0 12>; 415 }; 416 cpr_efuse_ring1: ring1@228 { 417 reg = <0x228 0x4>; 418 bits = <0 3>; 419 }; 420 cpr_efuse_ring2: ring2@228 { 421 reg = <0x228 0x4>; 422 bits = <4 3>; 423 }; 424 cpr_efuse_ring3: ring3@229 { 425 reg = <0x229 0x4>; 426 bits = <0 3>; 427 }; 428 cpr_efuse_revision: revision@218 { 429 reg = <0x218 0x4>; 430 bits = <3 3>; 431 }; 432 }; 433 434 rng: rng@e3000 { 435 compatible = "qcom,prng-ee"; 436 reg = <0x000e3000 0x1000>; 437 clocks = <&gcc GCC_PRNG_AHB_CLK>; 438 clock-names = "core"; 439 }; 440 441 bimc: interconnect@400000 { 442 reg = <0x00400000 0x80000>; 443 compatible = "qcom,qcs404-bimc"; 444 #interconnect-cells = <1>; 445 clock-names = "bus", "bus_a"; 446 clocks = <&rpmcc RPM_SMD_BIMC_CLK>, 447 <&rpmcc RPM_SMD_BIMC_A_CLK>; 448 }; 449 450 tsens: thermal-sensor@4a9000 { 451 compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; 452 reg = <0x004a9000 0x1000>, /* TM */ 453 <0x004a8000 0x1000>; /* SROT */ 454 nvmem-cells = <&tsens_caldata>; 455 nvmem-cell-names = "calib"; 456 #qcom,sensors = <10>; 457 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 458 interrupt-names = "uplow"; 459 #thermal-sensor-cells = <1>; 460 }; 461 462 pcnoc: interconnect@500000 { 463 reg = <0x00500000 0x15080>; 464 compatible = "qcom,qcs404-pcnoc"; 465 #interconnect-cells = <1>; 466 clock-names = "bus", "bus_a"; 467 clocks = <&rpmcc RPM_SMD_PNOC_CLK>, 468 <&rpmcc RPM_SMD_PNOC_A_CLK>; 469 }; 470 471 snoc: interconnect@580000 { 472 reg = <0x00580000 0x23080>; 473 compatible = "qcom,qcs404-snoc"; 474 #interconnect-cells = <1>; 475 clock-names = "bus", "bus_a"; 476 clocks = <&rpmcc RPM_SMD_SNOC_CLK>, 477 <&rpmcc RPM_SMD_SNOC_A_CLK>; 478 }; 479 480 remoteproc_cdsp: remoteproc@b00000 { 481 compatible = "qcom,qcs404-cdsp-pas"; 482 reg = <0x00b00000 0x4040>; 483 484 interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, 485 <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 486 <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 487 <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 488 <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 489 interrupt-names = "wdog", "fatal", "ready", 490 "handover", "stop-ack"; 491 492 clocks = <&xo_board>, 493 <&gcc GCC_CDSP_CFG_AHB_CLK>, 494 <&gcc GCC_CDSP_TBU_CLK>, 495 <&gcc GCC_BIMC_CDSP_CLK>, 496 <&turingcc TURING_WRAPPER_AON_CLK>, 497 <&turingcc TURING_Q6SS_AHBS_AON_CLK>, 498 <&turingcc TURING_Q6SS_AHBM_AON_CLK>, 499 <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; 500 clock-names = "xo", 501 "sway", 502 "tbu", 503 "bimc", 504 "ahb_aon", 505 "q6ss_slave", 506 "q6ss_master", 507 "q6_axim"; 508 509 resets = <&gcc GCC_CDSP_RESTART>; 510 reset-names = "restart"; 511 512 qcom,halt-regs = <&tcsr 0x19004>; 513 514 memory-region = <&cdsp_fw_mem>; 515 516 qcom,smem-states = <&cdsp_smp2p_out 0>; 517 qcom,smem-state-names = "stop"; 518 519 status = "disabled"; 520 521 glink-edge { 522 interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; 523 524 qcom,remote-pid = <5>; 525 mboxes = <&apcs_glb 12>; 526 527 label = "cdsp"; 528 }; 529 }; 530 531 usb3: usb@7678800 { 532 compatible = "qcom,dwc3"; 533 reg = <0x07678800 0x400>; 534 #address-cells = <1>; 535 #size-cells = <1>; 536 ranges; 537 clocks = <&gcc GCC_USB30_MASTER_CLK>, 538 <&gcc GCC_SYS_NOC_USB3_CLK>, 539 <&gcc GCC_USB30_SLEEP_CLK>, 540 <&gcc GCC_USB30_MOCK_UTMI_CLK>; 541 clock-names = "core", "iface", "sleep", "mock_utmi"; 542 assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, 543 <&gcc GCC_USB30_MASTER_CLK>; 544 assigned-clock-rates = <19200000>, <200000000>; 545 status = "disabled"; 546 547 dwc3@7580000 { 548 compatible = "snps,dwc3"; 549 reg = <0x07580000 0xcd00>; 550 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 551 phys = <&usb2_phy_sec>, <&usb3_phy>; 552 phy-names = "usb2-phy", "usb3-phy"; 553 snps,has-lpm-erratum; 554 snps,hird-threshold = /bits/ 8 <0x10>; 555 snps,usb3_lpm_capable; 556 dr_mode = "otg"; 557 }; 558 }; 559 560 usb2: usb@79b8800 { 561 compatible = "qcom,dwc3"; 562 reg = <0x079b8800 0x400>; 563 #address-cells = <1>; 564 #size-cells = <1>; 565 ranges; 566 clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>, 567 <&gcc GCC_PCNOC_USB2_CLK>, 568 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>, 569 <&gcc GCC_USB20_MOCK_UTMI_CLK>; 570 clock-names = "core", "iface", "sleep", "mock_utmi"; 571 assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, 572 <&gcc GCC_USB_HS_SYSTEM_CLK>; 573 assigned-clock-rates = <19200000>, <133333333>; 574 status = "disabled"; 575 576 dwc3@78c0000 { 577 compatible = "snps,dwc3"; 578 reg = <0x078c0000 0xcc00>; 579 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 580 phys = <&usb2_phy_prim>; 581 phy-names = "usb2-phy"; 582 snps,has-lpm-erratum; 583 snps,hird-threshold = /bits/ 8 <0x10>; 584 snps,usb3_lpm_capable; 585 dr_mode = "peripheral"; 586 }; 587 }; 588 589 tlmm: pinctrl@1000000 { 590 compatible = "qcom,qcs404-pinctrl"; 591 reg = <0x01000000 0x200000>, 592 <0x01300000 0x200000>, 593 <0x07b00000 0x200000>; 594 reg-names = "south", "north", "east"; 595 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 596 gpio-ranges = <&tlmm 0 0 120>; 597 gpio-controller; 598 #gpio-cells = <2>; 599 interrupt-controller; 600 #interrupt-cells = <2>; 601 602 blsp1_i2c0_default: blsp1-i2c0-default { 603 pins = "gpio32", "gpio33"; 604 function = "blsp_i2c0"; 605 }; 606 607 blsp1_i2c1_default: blsp1-i2c1-default { 608 pins = "gpio24", "gpio25"; 609 function = "blsp_i2c1"; 610 }; 611 612 blsp1_i2c2_default: blsp1-i2c2-default { 613 sda { 614 pins = "gpio19"; 615 function = "blsp_i2c_sda_a2"; 616 }; 617 618 scl { 619 pins = "gpio20"; 620 function = "blsp_i2c_scl_a2"; 621 }; 622 }; 623 624 blsp1_i2c3_default: blsp1-i2c3-default { 625 pins = "gpio84", "gpio85"; 626 function = "blsp_i2c3"; 627 }; 628 629 blsp1_i2c4_default: blsp1-i2c4-default { 630 pins = "gpio117", "gpio118"; 631 function = "blsp_i2c4"; 632 }; 633 634 blsp1_uart0_default: blsp1-uart0-default { 635 pins = "gpio30", "gpio31", "gpio32", "gpio33"; 636 function = "blsp_uart0"; 637 }; 638 639 blsp1_uart1_default: blsp1-uart1-default { 640 pins = "gpio22", "gpio23"; 641 function = "blsp_uart1"; 642 }; 643 644 blsp1_uart2_default: blsp1-uart2-default { 645 rx { 646 pins = "gpio18"; 647 function = "blsp_uart_rx_a2"; 648 }; 649 650 tx { 651 pins = "gpio17"; 652 function = "blsp_uart_tx_a2"; 653 }; 654 }; 655 656 blsp1_uart3_default: blsp1-uart3-default { 657 pins = "gpio82", "gpio83", "gpio84", "gpio85"; 658 function = "blsp_uart3"; 659 }; 660 661 blsp2_i2c0_default: blsp2-i2c0-default { 662 pins = "gpio28", "gpio29"; 663 function = "blsp_i2c5"; 664 }; 665 666 blsp1_spi0_default: blsp1-spi0-default { 667 pins = "gpio30", "gpio31", "gpio32", "gpio33"; 668 function = "blsp_spi0"; 669 }; 670 671 blsp1_spi1_default: blsp1-spi1-default { 672 pins = "gpio22", "gpio23", "gpio24", "gpio25"; 673 function = "blsp_spi1"; 674 }; 675 676 blsp1_spi2_default: blsp1-spi2-default { 677 pins = "gpio17", "gpio18", "gpio19", "gpio20"; 678 function = "blsp_spi2"; 679 }; 680 681 blsp1_spi3_default: blsp1-spi3-default { 682 pins = "gpio82", "gpio83", "gpio84", "gpio85"; 683 function = "blsp_spi3"; 684 }; 685 686 blsp1_spi4_default: blsp1-spi4-default { 687 pins = "gpio37", "gpio38", "gpio117", "gpio118"; 688 function = "blsp_spi4"; 689 }; 690 691 blsp2_spi0_default: blsp2-spi0-default { 692 pins = "gpio26", "gpio27", "gpio28", "gpio29"; 693 function = "blsp_spi5"; 694 }; 695 696 blsp2_uart0_default: blsp2-uart0-default { 697 pins = "gpio26", "gpio27", "gpio28", "gpio29"; 698 function = "blsp_uart5"; 699 }; 700 }; 701 702 gcc: clock-controller@1800000 { 703 compatible = "qcom,gcc-qcs404"; 704 reg = <0x01800000 0x80000>; 705 #clock-cells = <1>; 706 #reset-cells = <1>; 707 708 assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; 709 assigned-clock-rates = <19200000>; 710 }; 711 712 tcsr_mutex_regs: syscon@1905000 { 713 compatible = "syscon"; 714 reg = <0x01905000 0x20000>; 715 }; 716 717 tcsr: syscon@1937000 { 718 compatible = "syscon"; 719 reg = <0x01937000 0x25000>; 720 }; 721 722 spmi_bus: spmi@200f000 { 723 compatible = "qcom,spmi-pmic-arb"; 724 reg = <0x0200f000 0x001000>, 725 <0x02400000 0x800000>, 726 <0x02c00000 0x800000>, 727 <0x03800000 0x200000>, 728 <0x0200a000 0x002100>; 729 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 730 interrupt-names = "periph_irq"; 731 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 732 qcom,ee = <0>; 733 qcom,channel = <0>; 734 #address-cells = <2>; 735 #size-cells = <0>; 736 interrupt-controller; 737 #interrupt-cells = <4>; 738 }; 739 740 remoteproc_wcss: remoteproc@7400000 { 741 compatible = "qcom,qcs404-wcss-pas"; 742 reg = <0x07400000 0x4040>; 743 744 interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, 745 <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 746 <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 747 <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 748 <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 749 interrupt-names = "wdog", "fatal", "ready", 750 "handover", "stop-ack"; 751 752 clocks = <&xo_board>; 753 clock-names = "xo"; 754 755 memory-region = <&wlan_fw_mem>; 756 757 qcom,smem-states = <&wcss_smp2p_out 0>; 758 qcom,smem-state-names = "stop"; 759 760 status = "disabled"; 761 762 glink-edge { 763 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; 764 765 qcom,remote-pid = <1>; 766 mboxes = <&apcs_glb 16>; 767 768 label = "wcss"; 769 }; 770 }; 771 772 pcie_phy: phy@7786000 { 773 compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; 774 reg = <0x07786000 0xb8>; 775 776 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; 777 resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, 778 <&gcc 21>; 779 reset-names = "phy", "pipe"; 780 781 clock-output-names = "pcie_0_pipe_clk"; 782 #phy-cells = <0>; 783 784 status = "disabled"; 785 }; 786 787 sdcc1: sdcc@7804000 { 788 compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; 789 reg = <0x07804000 0x1000>, <0x7805000 0x1000>; 790 reg-names = "hc", "cqhci"; 791 792 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 793 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 794 interrupt-names = "hc_irq", "pwr_irq"; 795 796 clocks = <&gcc GCC_SDCC1_APPS_CLK>, 797 <&gcc GCC_SDCC1_AHB_CLK>, 798 <&xo_board>; 799 clock-names = "core", "iface", "xo"; 800 801 status = "disabled"; 802 }; 803 804 blsp1_dma: dma-controller@7884000 { 805 compatible = "qcom,bam-v1.7.0"; 806 reg = <0x07884000 0x25000>; 807 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 808 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 809 clock-names = "bam_clk"; 810 #dma-cells = <1>; 811 qcom,ee = <0>; 812 status = "okay"; 813 }; 814 815 blsp1_uart0: serial@78af000 { 816 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 817 reg = <0x078af000 0x200>; 818 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 819 clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 820 clock-names = "core", "iface"; 821 dmas = <&blsp1_dma 1>, <&blsp1_dma 0>; 822 dma-names = "rx", "tx"; 823 pinctrl-names = "default"; 824 pinctrl-0 = <&blsp1_uart0_default>; 825 status = "disabled"; 826 }; 827 828 blsp1_uart1: serial@78b0000 { 829 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 830 reg = <0x078b0000 0x200>; 831 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 832 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 833 clock-names = "core", "iface"; 834 dmas = <&blsp1_dma 3>, <&blsp1_dma 2>; 835 dma-names = "rx", "tx"; 836 pinctrl-names = "default"; 837 pinctrl-0 = <&blsp1_uart1_default>; 838 status = "disabled"; 839 }; 840 841 blsp1_uart2: serial@78b1000 { 842 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 843 reg = <0x078b1000 0x200>; 844 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; 845 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 846 clock-names = "core", "iface"; 847 dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; 848 dma-names = "rx", "tx"; 849 pinctrl-names = "default"; 850 pinctrl-0 = <&blsp1_uart2_default>; 851 status = "okay"; 852 }; 853 854 ethernet: ethernet@7a80000 { 855 compatible = "qcom,qcs404-ethqos"; 856 reg = <0x07a80000 0x10000>, 857 <0x07a96000 0x100>; 858 reg-names = "stmmaceth", "rgmii"; 859 clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; 860 clocks = <&gcc GCC_ETH_AXI_CLK>, 861 <&gcc GCC_ETH_SLAVE_AHB_CLK>, 862 <&gcc GCC_ETH_PTP_CLK>, 863 <&gcc GCC_ETH_RGMII_CLK>; 864 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 865 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 866 interrupt-names = "macirq", "eth_lpi"; 867 868 snps,tso; 869 rx-fifo-depth = <4096>; 870 tx-fifo-depth = <4096>; 871 872 status = "disabled"; 873 }; 874 875 wifi: wifi@a000000 { 876 compatible = "qcom,wcn3990-wifi"; 877 reg = <0xa000000 0x800000>; 878 reg-names = "membase"; 879 memory-region = <&wlan_msa_mem>; 880 interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, 881 <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, 882 <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, 883 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, 884 <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, 885 <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, 886 <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, 887 <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, 888 <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, 889 <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, 890 <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, 891 <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; 892 status = "disabled"; 893 }; 894 895 blsp1_uart3: serial@78b2000 { 896 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 897 reg = <0x078b2000 0x200>; 898 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; 899 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 900 clock-names = "core", "iface"; 901 dmas = <&blsp1_dma 7>, <&blsp1_dma 6>; 902 dma-names = "rx", "tx"; 903 pinctrl-names = "default"; 904 pinctrl-0 = <&blsp1_uart3_default>; 905 status = "disabled"; 906 }; 907 908 blsp1_i2c0: i2c@78b5000 { 909 compatible = "qcom,i2c-qup-v2.2.1"; 910 reg = <0x078b5000 0x600>; 911 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 912 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 913 <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>; 914 clock-names = "iface", "core"; 915 pinctrl-names = "default"; 916 pinctrl-0 = <&blsp1_i2c0_default>; 917 #address-cells = <1>; 918 #size-cells = <0>; 919 status = "disabled"; 920 }; 921 922 blsp1_spi0: spi@78b5000 { 923 compatible = "qcom,spi-qup-v2.2.1"; 924 reg = <0x078b5000 0x600>; 925 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 926 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 927 <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>; 928 clock-names = "iface", "core"; 929 pinctrl-names = "default"; 930 pinctrl-0 = <&blsp1_spi0_default>; 931 #address-cells = <1>; 932 #size-cells = <0>; 933 status = "disabled"; 934 }; 935 936 blsp1_i2c1: i2c@78b6000 { 937 compatible = "qcom,i2c-qup-v2.2.1"; 938 reg = <0x078b6000 0x600>; 939 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 940 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 941 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; 942 clock-names = "iface", "core"; 943 pinctrl-names = "default"; 944 pinctrl-0 = <&blsp1_i2c1_default>; 945 #address-cells = <1>; 946 #size-cells = <0>; 947 status = "disabled"; 948 }; 949 950 blsp1_spi1: spi@78b6000 { 951 compatible = "qcom,spi-qup-v2.2.1"; 952 reg = <0x078b6000 0x600>; 953 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 954 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 955 <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; 956 clock-names = "iface", "core"; 957 pinctrl-names = "default"; 958 pinctrl-0 = <&blsp1_spi1_default>; 959 #address-cells = <1>; 960 #size-cells = <0>; 961 status = "disabled"; 962 }; 963 964 blsp1_i2c2: i2c@78b7000 { 965 compatible = "qcom,i2c-qup-v2.2.1"; 966 reg = <0x078b7000 0x600>; 967 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 968 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 969 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; 970 clock-names = "iface", "core"; 971 pinctrl-names = "default"; 972 pinctrl-0 = <&blsp1_i2c2_default>; 973 #address-cells = <1>; 974 #size-cells = <0>; 975 status = "disabled"; 976 }; 977 978 blsp1_spi2: spi@78b7000 { 979 compatible = "qcom,spi-qup-v2.2.1"; 980 reg = <0x078b7000 0x600>; 981 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 982 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 983 <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>; 984 clock-names = "iface", "core"; 985 pinctrl-names = "default"; 986 pinctrl-0 = <&blsp1_spi2_default>; 987 #address-cells = <1>; 988 #size-cells = <0>; 989 status = "disabled"; 990 }; 991 992 blsp1_i2c3: i2c@78b8000 { 993 compatible = "qcom,i2c-qup-v2.2.1"; 994 reg = <0x078b8000 0x600>; 995 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 996 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 997 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; 998 clock-names = "iface", "core"; 999 pinctrl-names = "default"; 1000 pinctrl-0 = <&blsp1_i2c3_default>; 1001 #address-cells = <1>; 1002 #size-cells = <0>; 1003 status = "disabled"; 1004 }; 1005 1006 blsp1_spi3: spi@78b8000 { 1007 compatible = "qcom,spi-qup-v2.2.1"; 1008 reg = <0x078b8000 0x600>; 1009 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1010 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1011 <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>; 1012 clock-names = "iface", "core"; 1013 pinctrl-names = "default"; 1014 pinctrl-0 = <&blsp1_spi3_default>; 1015 #address-cells = <1>; 1016 #size-cells = <0>; 1017 status = "disabled"; 1018 }; 1019 1020 blsp1_i2c4: i2c@78b9000 { 1021 compatible = "qcom,i2c-qup-v2.2.1"; 1022 reg = <0x078b9000 0x600>; 1023 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 1024 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1025 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; 1026 clock-names = "iface", "core"; 1027 pinctrl-names = "default"; 1028 pinctrl-0 = <&blsp1_i2c4_default>; 1029 #address-cells = <1>; 1030 #size-cells = <0>; 1031 status = "disabled"; 1032 }; 1033 1034 blsp1_spi4: spi@78b9000 { 1035 compatible = "qcom,spi-qup-v2.2.1"; 1036 reg = <0x078b9000 0x600>; 1037 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 1038 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1039 <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>; 1040 clock-names = "iface", "core"; 1041 pinctrl-names = "default"; 1042 pinctrl-0 = <&blsp1_spi4_default>; 1043 #address-cells = <1>; 1044 #size-cells = <0>; 1045 status = "disabled"; 1046 }; 1047 1048 blsp2_dma: dma-controller@7ac4000 { 1049 compatible = "qcom,bam-v1.7.0"; 1050 reg = <0x07ac4000 0x17000>; 1051 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; 1052 clocks = <&gcc GCC_BLSP2_AHB_CLK>; 1053 clock-names = "bam_clk"; 1054 #dma-cells = <1>; 1055 qcom,ee = <0>; 1056 status = "disabled"; 1057 }; 1058 1059 blsp2_uart0: serial@7aef000 { 1060 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 1061 reg = <0x07aef000 0x200>; 1062 interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; 1063 clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 1064 clock-names = "core", "iface"; 1065 dmas = <&blsp2_dma 1>, <&blsp2_dma 0>; 1066 dma-names = "rx", "tx"; 1067 pinctrl-names = "default"; 1068 pinctrl-0 = <&blsp2_uart0_default>; 1069 status = "disabled"; 1070 }; 1071 1072 blsp2_i2c0: i2c@7af5000 { 1073 compatible = "qcom,i2c-qup-v2.2.1"; 1074 reg = <0x07af5000 0x600>; 1075 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 1076 clocks = <&gcc GCC_BLSP2_AHB_CLK>, 1077 <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>; 1078 clock-names = "iface", "core"; 1079 pinctrl-names = "default"; 1080 pinctrl-0 = <&blsp2_i2c0_default>; 1081 #address-cells = <1>; 1082 #size-cells = <0>; 1083 status = "disabled"; 1084 }; 1085 1086 blsp2_spi0: spi@7af5000 { 1087 compatible = "qcom,spi-qup-v2.2.1"; 1088 reg = <0x07af5000 0x600>; 1089 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 1090 clocks = <&gcc GCC_BLSP2_AHB_CLK>, 1091 <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>; 1092 clock-names = "iface", "core"; 1093 pinctrl-names = "default"; 1094 pinctrl-0 = <&blsp2_spi0_default>; 1095 #address-cells = <1>; 1096 #size-cells = <0>; 1097 status = "disabled"; 1098 }; 1099 1100 imem@8600000 { 1101 compatible = "simple-mfd"; 1102 reg = <0x08600000 0x1000>; 1103 1104 #address-cells = <1>; 1105 #size-cells = <1>; 1106 1107 ranges = <0 0x08600000 0x1000>; 1108 1109 pil-reloc@94c { 1110 compatible = "qcom,pil-reloc-info"; 1111 reg = <0x94c 0xc8>; 1112 }; 1113 }; 1114 1115 intc: interrupt-controller@b000000 { 1116 compatible = "qcom,msm-qgic2"; 1117 interrupt-controller; 1118 #interrupt-cells = <3>; 1119 reg = <0x0b000000 0x1000>, 1120 <0x0b002000 0x1000>; 1121 }; 1122 1123 apcs_glb: mailbox@b011000 { 1124 compatible = "qcom,qcs404-apcs-apps-global", "syscon"; 1125 reg = <0x0b011000 0x1000>; 1126 #mbox-cells = <1>; 1127 clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; 1128 clock-names = "pll", "aux"; 1129 #clock-cells = <0>; 1130 }; 1131 1132 apcs_hfpll: clock-controller@b016000 { 1133 compatible = "qcom,hfpll"; 1134 reg = <0x0b016000 0x30>; 1135 #clock-cells = <0>; 1136 clock-output-names = "apcs_hfpll"; 1137 clocks = <&xo_board>; 1138 clock-names = "xo"; 1139 }; 1140 1141 watchdog@b017000 { 1142 compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; 1143 reg = <0x0b017000 0x1000>; 1144 clocks = <&sleep_clk>; 1145 }; 1146 1147 cpr: power-controller@b018000 { 1148 compatible = "qcom,qcs404-cpr", "qcom,cpr"; 1149 reg = <0x0b018000 0x1000>; 1150 interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; 1151 clocks = <&xo_board>; 1152 clock-names = "ref"; 1153 vdd-apc-supply = <&pms405_s3>; 1154 #power-domain-cells = <0>; 1155 operating-points-v2 = <&cpr_opp_table>; 1156 acc-syscon = <&tcsr>; 1157 1158 nvmem-cells = <&cpr_efuse_quot_offset1>, 1159 <&cpr_efuse_quot_offset2>, 1160 <&cpr_efuse_quot_offset3>, 1161 <&cpr_efuse_init_voltage1>, 1162 <&cpr_efuse_init_voltage2>, 1163 <&cpr_efuse_init_voltage3>, 1164 <&cpr_efuse_quot1>, 1165 <&cpr_efuse_quot2>, 1166 <&cpr_efuse_quot3>, 1167 <&cpr_efuse_ring1>, 1168 <&cpr_efuse_ring2>, 1169 <&cpr_efuse_ring3>, 1170 <&cpr_efuse_revision>; 1171 nvmem-cell-names = "cpr_quotient_offset1", 1172 "cpr_quotient_offset2", 1173 "cpr_quotient_offset3", 1174 "cpr_init_voltage1", 1175 "cpr_init_voltage2", 1176 "cpr_init_voltage3", 1177 "cpr_quotient1", 1178 "cpr_quotient2", 1179 "cpr_quotient3", 1180 "cpr_ring_osc1", 1181 "cpr_ring_osc2", 1182 "cpr_ring_osc3", 1183 "cpr_fuse_revision"; 1184 }; 1185 1186 timer@b120000 { 1187 #address-cells = <1>; 1188 #size-cells = <1>; 1189 ranges; 1190 compatible = "arm,armv7-timer-mem"; 1191 reg = <0x0b120000 0x1000>; 1192 clock-frequency = <19200000>; 1193 1194 frame@b121000 { 1195 frame-number = <0>; 1196 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1197 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1198 reg = <0x0b121000 0x1000>, 1199 <0x0b122000 0x1000>; 1200 }; 1201 1202 frame@b123000 { 1203 frame-number = <1>; 1204 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1205 reg = <0x0b123000 0x1000>; 1206 status = "disabled"; 1207 }; 1208 1209 frame@b124000 { 1210 frame-number = <2>; 1211 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1212 reg = <0x0b124000 0x1000>; 1213 status = "disabled"; 1214 }; 1215 1216 frame@b125000 { 1217 frame-number = <3>; 1218 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1219 reg = <0x0b125000 0x1000>; 1220 status = "disabled"; 1221 }; 1222 1223 frame@b126000 { 1224 frame-number = <4>; 1225 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1226 reg = <0x0b126000 0x1000>; 1227 status = "disabled"; 1228 }; 1229 1230 frame@b127000 { 1231 frame-number = <5>; 1232 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1233 reg = <0xb127000 0x1000>; 1234 status = "disabled"; 1235 }; 1236 1237 frame@b128000 { 1238 frame-number = <6>; 1239 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1240 reg = <0x0b128000 0x1000>; 1241 status = "disabled"; 1242 }; 1243 }; 1244 1245 remoteproc_adsp: remoteproc@c700000 { 1246 compatible = "qcom,qcs404-adsp-pas"; 1247 reg = <0x0c700000 0x4040>; 1248 1249 interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, 1250 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1251 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1252 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1253 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1254 interrupt-names = "wdog", "fatal", "ready", 1255 "handover", "stop-ack"; 1256 1257 clocks = <&xo_board>; 1258 clock-names = "xo"; 1259 1260 memory-region = <&adsp_fw_mem>; 1261 1262 qcom,smem-states = <&adsp_smp2p_out 0>; 1263 qcom,smem-state-names = "stop"; 1264 1265 status = "disabled"; 1266 1267 glink-edge { 1268 interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; 1269 1270 qcom,remote-pid = <2>; 1271 mboxes = <&apcs_glb 8>; 1272 1273 label = "adsp"; 1274 }; 1275 }; 1276 1277 pcie: pci@10000000 { 1278 compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; 1279 reg = <0x10000000 0xf1d>, 1280 <0x10000f20 0xa8>, 1281 <0x07780000 0x2000>, 1282 <0x10001000 0x2000>; 1283 reg-names = "dbi", "elbi", "parf", "config"; 1284 device_type = "pci"; 1285 linux,pci-domain = <0>; 1286 bus-range = <0x00 0xff>; 1287 num-lanes = <1>; 1288 #address-cells = <3>; 1289 #size-cells = <2>; 1290 1291 ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ 1292 <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ 1293 1294 interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; 1295 interrupt-names = "msi"; 1296 #interrupt-cells = <1>; 1297 interrupt-map-mask = <0 0 0 0x7>; 1298 interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1299 <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1300 <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1301 <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1302 clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, 1303 <&gcc GCC_PCIE_0_AUX_CLK>, 1304 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, 1305 <&gcc GCC_PCIE_0_SLV_AXI_CLK>; 1306 clock-names = "iface", "aux", "master_bus", "slave_bus"; 1307 1308 resets = <&gcc 18>, 1309 <&gcc 17>, 1310 <&gcc 15>, 1311 <&gcc 19>, 1312 <&gcc GCC_PCIE_0_BCR>, 1313 <&gcc 16>; 1314 reset-names = "axi_m", 1315 "axi_s", 1316 "axi_m_sticky", 1317 "pipe_sticky", 1318 "pwr", 1319 "ahb"; 1320 1321 phys = <&pcie_phy>; 1322 phy-names = "pciephy"; 1323 1324 status = "disabled"; 1325 }; 1326 }; 1327 1328 timer { 1329 compatible = "arm,armv8-timer"; 1330 interrupts = <GIC_PPI 2 0xff08>, 1331 <GIC_PPI 3 0xff08>, 1332 <GIC_PPI 4 0xff08>, 1333 <GIC_PPI 1 0xff08>; 1334 }; 1335 1336 smp2p-adsp { 1337 compatible = "qcom,smp2p"; 1338 qcom,smem = <443>, <429>; 1339 interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; 1340 mboxes = <&apcs_glb 10>; 1341 qcom,local-pid = <0>; 1342 qcom,remote-pid = <2>; 1343 1344 adsp_smp2p_out: master-kernel { 1345 qcom,entry-name = "master-kernel"; 1346 #qcom,smem-state-cells = <1>; 1347 }; 1348 1349 adsp_smp2p_in: slave-kernel { 1350 qcom,entry-name = "slave-kernel"; 1351 interrupt-controller; 1352 #interrupt-cells = <2>; 1353 }; 1354 }; 1355 1356 smp2p-cdsp { 1357 compatible = "qcom,smp2p"; 1358 qcom,smem = <94>, <432>; 1359 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; 1360 mboxes = <&apcs_glb 14>; 1361 qcom,local-pid = <0>; 1362 qcom,remote-pid = <5>; 1363 1364 cdsp_smp2p_out: master-kernel { 1365 qcom,entry-name = "master-kernel"; 1366 #qcom,smem-state-cells = <1>; 1367 }; 1368 1369 cdsp_smp2p_in: slave-kernel { 1370 qcom,entry-name = "slave-kernel"; 1371 interrupt-controller; 1372 #interrupt-cells = <2>; 1373 }; 1374 }; 1375 1376 smp2p-wcss { 1377 compatible = "qcom,smp2p"; 1378 qcom,smem = <435>, <428>; 1379 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; 1380 mboxes = <&apcs_glb 18>; 1381 qcom,local-pid = <0>; 1382 qcom,remote-pid = <1>; 1383 1384 wcss_smp2p_out: master-kernel { 1385 qcom,entry-name = "master-kernel"; 1386 #qcom,smem-state-cells = <1>; 1387 }; 1388 1389 wcss_smp2p_in: slave-kernel { 1390 qcom,entry-name = "slave-kernel"; 1391 interrupt-controller; 1392 #interrupt-cells = <2>; 1393 }; 1394 }; 1395 1396 thermal-zones { 1397 aoss-thermal { 1398 polling-delay-passive = <250>; 1399 polling-delay = <1000>; 1400 1401 thermal-sensors = <&tsens 0>; 1402 1403 trips { 1404 aoss_alert0: trip-point0 { 1405 temperature = <105000>; 1406 hysteresis = <2000>; 1407 type = "hot"; 1408 }; 1409 }; 1410 }; 1411 1412 q6-hvx-thermal { 1413 polling-delay-passive = <250>; 1414 polling-delay = <1000>; 1415 1416 thermal-sensors = <&tsens 1>; 1417 1418 trips { 1419 q6_hvx_alert0: trip-point0 { 1420 temperature = <105000>; 1421 hysteresis = <2000>; 1422 type = "hot"; 1423 }; 1424 }; 1425 }; 1426 1427 lpass-thermal { 1428 polling-delay-passive = <250>; 1429 polling-delay = <1000>; 1430 1431 thermal-sensors = <&tsens 2>; 1432 1433 trips { 1434 lpass_alert0: trip-point0 { 1435 temperature = <105000>; 1436 hysteresis = <2000>; 1437 type = "hot"; 1438 }; 1439 }; 1440 }; 1441 1442 wlan-thermal { 1443 polling-delay-passive = <250>; 1444 polling-delay = <1000>; 1445 1446 thermal-sensors = <&tsens 3>; 1447 1448 trips { 1449 wlan_alert0: trip-point0 { 1450 temperature = <105000>; 1451 hysteresis = <2000>; 1452 type = "hot"; 1453 }; 1454 }; 1455 }; 1456 1457 cluster-thermal { 1458 polling-delay-passive = <250>; 1459 polling-delay = <1000>; 1460 1461 thermal-sensors = <&tsens 4>; 1462 1463 trips { 1464 cluster_alert0: trip-point0 { 1465 temperature = <95000>; 1466 hysteresis = <2000>; 1467 type = "hot"; 1468 }; 1469 cluster_alert1: trip-point1 { 1470 temperature = <105000>; 1471 hysteresis = <2000>; 1472 type = "passive"; 1473 }; 1474 cluster_crit: cluster_crit { 1475 temperature = <120000>; 1476 hysteresis = <2000>; 1477 type = "critical"; 1478 }; 1479 }; 1480 cooling-maps { 1481 map0 { 1482 trip = <&cluster_alert1>; 1483 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1484 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1485 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1486 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1487 }; 1488 }; 1489 }; 1490 1491 cpu0-thermal { 1492 polling-delay-passive = <250>; 1493 polling-delay = <1000>; 1494 1495 thermal-sensors = <&tsens 5>; 1496 1497 trips { 1498 cpu0_alert0: trip-point0 { 1499 temperature = <95000>; 1500 hysteresis = <2000>; 1501 type = "hot"; 1502 }; 1503 cpu0_alert1: trip-point1 { 1504 temperature = <105000>; 1505 hysteresis = <2000>; 1506 type = "passive"; 1507 }; 1508 cpu0_crit: cpu_crit { 1509 temperature = <120000>; 1510 hysteresis = <2000>; 1511 type = "critical"; 1512 }; 1513 }; 1514 cooling-maps { 1515 map0 { 1516 trip = <&cpu0_alert1>; 1517 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1518 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1519 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1520 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1521 }; 1522 }; 1523 }; 1524 1525 cpu1-thermal { 1526 polling-delay-passive = <250>; 1527 polling-delay = <1000>; 1528 1529 thermal-sensors = <&tsens 6>; 1530 1531 trips { 1532 cpu1_alert0: trip-point0 { 1533 temperature = <95000>; 1534 hysteresis = <2000>; 1535 type = "hot"; 1536 }; 1537 cpu1_alert1: trip-point1 { 1538 temperature = <105000>; 1539 hysteresis = <2000>; 1540 type = "passive"; 1541 }; 1542 cpu1_crit: cpu_crit { 1543 temperature = <120000>; 1544 hysteresis = <2000>; 1545 type = "critical"; 1546 }; 1547 }; 1548 cooling-maps { 1549 map0 { 1550 trip = <&cpu1_alert1>; 1551 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1552 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1553 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1554 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1555 }; 1556 }; 1557 }; 1558 1559 cpu2-thermal { 1560 polling-delay-passive = <250>; 1561 polling-delay = <1000>; 1562 1563 thermal-sensors = <&tsens 7>; 1564 1565 trips { 1566 cpu2_alert0: trip-point0 { 1567 temperature = <95000>; 1568 hysteresis = <2000>; 1569 type = "hot"; 1570 }; 1571 cpu2_alert1: trip-point1 { 1572 temperature = <105000>; 1573 hysteresis = <2000>; 1574 type = "passive"; 1575 }; 1576 cpu2_crit: cpu_crit { 1577 temperature = <120000>; 1578 hysteresis = <2000>; 1579 type = "critical"; 1580 }; 1581 }; 1582 cooling-maps { 1583 map0 { 1584 trip = <&cpu2_alert1>; 1585 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1586 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1587 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1588 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1589 }; 1590 }; 1591 }; 1592 1593 cpu3-thermal { 1594 polling-delay-passive = <250>; 1595 polling-delay = <1000>; 1596 1597 thermal-sensors = <&tsens 8>; 1598 1599 trips { 1600 cpu3_alert0: trip-point0 { 1601 temperature = <95000>; 1602 hysteresis = <2000>; 1603 type = "hot"; 1604 }; 1605 cpu3_alert1: trip-point1 { 1606 temperature = <105000>; 1607 hysteresis = <2000>; 1608 type = "passive"; 1609 }; 1610 cpu3_crit: cpu_crit { 1611 temperature = <120000>; 1612 hysteresis = <2000>; 1613 type = "critical"; 1614 }; 1615 }; 1616 cooling-maps { 1617 map0 { 1618 trip = <&cpu3_alert1>; 1619 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1620 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1621 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1622 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1623 }; 1624 }; 1625 }; 1626 1627 gpu-thermal { 1628 polling-delay-passive = <250>; 1629 polling-delay = <1000>; 1630 1631 thermal-sensors = <&tsens 9>; 1632 1633 trips { 1634 gpu_alert0: trip-point0 { 1635 temperature = <95000>; 1636 hysteresis = <2000>; 1637 type = "hot"; 1638 }; 1639 }; 1640 }; 1641 }; 1642}; 1643