1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw> 4 */ 5 6/dts-v1/; 7 8#include "msm8996-xiaomi-common.dtsi" 9#include "pmi8996.dtsi" 10#include <dt-bindings/sound/qcom,q6afe.h> 11#include <dt-bindings/sound/qcom,q6asm.h> 12 13/ { 14 model = "Xiaomi Mi 5s Plus"; 15 compatible = "xiaomi,natrium", "qcom,msm8996"; 16 chassis-type = "handset"; 17 qcom,msm-id = <305 0x10000>; 18 qcom,board-id = <47 0>; 19}; 20 21&adsp_pil { 22 firmware-name = "qcom/msm8996/natrium/adsp.mbn"; 23}; 24 25&blsp2_i2c6 { 26 touchscreen@20 { 27 compatible = "syna,rmi4-i2c"; 28 reg = <0x20>; 29 interrupt-parent = <&tlmm>; 30 interrupts = <125 IRQ_TYPE_LEVEL_LOW>; 31 vdd-supply = <&vdd_3v2_tp>; 32 syna,reset-delay-ms = <200>; 33 syna,startup-delay-ms = <5>; 34 35 pinctrl-names = "default", "sleep"; 36 pinctrl-0 = <&touchscreen_default>; 37 pinctrl-1 = <&touchscreen_sleep>; 38 }; 39}; 40 41&dsi0 { 42 status = "okay"; 43 44 vdda-supply = <&vreg_l2a_1p25>; 45 vcca-supply = <&vreg_l28a_0p925>; 46 47 pinctrl-names = "default", "sleep"; 48 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; 49 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; 50 51 panel: panel@0 { 52 compatible = "jdi,fhd-r63452"; 53 reg = <0>; 54 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; 55 backlight = <&pmi8994_wled>; 56 57 port { 58 panel_in: endpoint { 59 remote-endpoint = <&dsi0_out>; 60 }; 61 }; 62 }; 63}; 64 65&dsi0_out { 66 remote-endpoint = <&panel_in>; 67}; 68 69&gpu { 70 zap-shader { 71 firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; 72 }; 73}; 74 75&mss_pil { 76 firmware-name = "qcom/msm8996/natrium/mba.mbn", 77 "qcom/msm8996/natrium/modem.mbn"; 78}; 79 80&pmi8994_wled { 81 status = "okay"; 82 83 qcom,enabled-strings = <0 1>; 84 qcom,switching-freq = <600>; 85}; 86 87&q6asmdai { 88 dai@0 { 89 reg = <0>; 90 }; 91 92 dai@1 { 93 reg = <1>; 94 }; 95 96 dai@2 { 97 reg = <2>; 98 }; 99}; 100 101&slpi_pil { 102 firmware-name = "qcom/msm8996/natrium/slpi.mbn"; 103}; 104 105&sound { 106 compatible = "qcom,apq8096-sndcard"; 107 model = "natrium"; 108 audio-routing = "RX_BIAS", "MCLK"; 109 110 mm1-dai-link { 111 link-name = "MultiMedia1"; 112 cpu { 113 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; 114 }; 115 }; 116 117 mm2-dai-link { 118 link-name = "MultiMedia2"; 119 cpu { 120 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; 121 }; 122 }; 123 124 mm3-dai-link { 125 link-name = "MultiMedia3"; 126 cpu { 127 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; 128 }; 129 }; 130 131 slim-dai-link { 132 link-name = "SLIM Playback"; 133 cpu { 134 sound-dai = <&q6afedai SLIMBUS_6_RX>; 135 }; 136 137 platform { 138 sound-dai = <&q6routing>; 139 }; 140 141 codec { 142 sound-dai = <&wcd9335 6>; 143 }; 144 }; 145 146 slimcap-dai-link { 147 link-name = "SLIM Capture"; 148 cpu { 149 sound-dai = <&q6afedai SLIMBUS_0_TX>; 150 }; 151 152 platform { 153 sound-dai = <&q6routing>; 154 }; 155 156 codec { 157 sound-dai = <&wcd9335 1>; 158 }; 159 }; 160}; 161 162&venus { 163 firmware-name = "qcom/msm8996/natrium/venus.mbn"; 164}; 165 166&rpm_requests { 167 pm8994-regulators { 168 vreg_l3a_0p875: l3 { 169 regulator-name = "vreg_l3a_0p875"; 170 regulator-min-microvolt = <850000>; 171 regulator-max-microvolt = <1300000>; 172 }; 173 vreg_l11a_1p1: l11 { 174 regulator-name = "vreg_l11a_1p1"; 175 regulator-min-microvolt = <1100000>; 176 regulator-max-microvolt = <1100000>; 177 }; 178 vreg_l17a_2p8: l17 { 179 regulator-name = "vreg_l17a_2p8"; 180 regulator-min-microvolt = <2800000>; 181 regulator-max-microvolt = <2800000>; 182 }; 183 vreg_l18a_2p8: l18 { 184 regulator-name = "vreg_l18a_2p8"; 185 regulator-min-microvolt = <2800000>; 186 regulator-max-microvolt = <2800000>; 187 }; 188 vreg_l29a_2p8: l29 { 189 regulator-name = "vreg_l29a_2p8"; 190 regulator-min-microvolt = <2800000>; 191 regulator-max-microvolt = <2800000>; 192 }; 193 }; 194}; 195 196&pm8994_gpios { 197 gpio-line-names = 198 "NC", /* GPIO_1 */ 199 "VOL_UP_N", /* GPIO_2 */ 200 "SPKR_ID", /* GPIO_3 */ 201 "PWM_HAPTICS", /* GPIO_4 */ 202 "INFARED_DRV", /* GPIO_5 */ 203 "NC", /* GPIO_6 */ 204 "KEYPAD_LED_EN_A", /* GPIO_7 */ 205 "WL_EN", /* GPIO_8 */ 206 "3P3_ENABLE", /* GPIO_9 */ 207 "NC", /* GPIO_10 */ 208 "NC", /* GPIO_11 */ 209 "NC", /* GPIO_12 */ 210 "NC", /* GPIO_13 */ 211 "NC", /* GPIO_14 */ 212 "DIVCLK1_CDC", /* GPIO_15 */ 213 "DIVCLK2_HAPTICS", /* GPIO_16 */ 214 "NC", /* GPIO_17 */ 215 "32KHz_CLK_IN", /* GPIO_18 */ 216 "BT_EN", /* GPIO_19 */ 217 "PMIC_SLB", /* GPIO_20 */ 218 "UIM_BATT_ALARM", /* GPIO_21 */ 219 "NC"; /* GPIO_22 */ 220}; 221 222&pm8994_mpps { 223 gpio-line-names = 224 "NC", /* MPP_1 */ 225 "CCI_TIMER1", /* MPP_2 */ 226 "PMIC_SLB", /* MPP_3 */ 227 "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ 228 "NC", /* MPP_5 */ 229 "NC", /* MPP_6 */ 230 "NC", /* MPP_7 */ 231 "NC"; /* MPP_8 */ 232}; 233 234&pmi8994_gpios { 235 gpio-line-names = 236 "NC", /* GPIO_1 */ 237 "SPKR_PA_EN", /* GPIO_2 */ 238 "NC", /* GPIO_3 */ 239 "NC", /* GPIO_4 */ 240 "NC", /* GPIO_5 */ 241 "NC", /* GPIO_6 */ 242 "NC", /* GPIO_7 */ 243 "NC", /* GPIO_8 */ 244 "NC", /* GPIO_9 */ 245 "NC"; /* GPIO_10 */ 246}; 247 248&tlmm { 249 gpio-line-names = 250 "ESE_SPI_MOSI", /* GPIO_0 */ 251 "ESE_SPI_MISO", /* GPIO_1 */ 252 "NC", /* GPIO_2 */ 253 "ESE_SPI_CLK", /* GPIO_3 */ 254 "MSM_UART_TX", /* GPIO_4 */ 255 "MSM_UART_RX", /* GPIO_5 */ 256 "NFC_I2C_SDA", /* GPIO_6 */ 257 "NFC_I2C_SCL", /* GPIO_7 */ 258 "LCD0_RESET_N", /* GPIO_8 */ 259 "NFC_IRQ", /* GPIO_9 */ 260 "LCD_TE", /* GPIO_10 */ 261 "LCD_ID_DET1", /* GPIO_11 */ 262 "NFC_DISABLE", /* GPIO_12 */ 263 "CAM_MCLK0", /* GPIO_13 */ 264 "CAM_MCLK1", /* GPIO_14 */ 265 "CAM_MCLK2", /* GPIO_15 */ 266 "ESE_PWR_REQ", /* GPIO_16 */ 267 "CCI_I2C_SDA0", /* GPIO_17 */ 268 "CCI_I2C_SCL0", /* GPIO_18 */ 269 "CCI_I2C_SDA1", /* GPIO_19 */ 270 "CCI_I2C_SCL1", /* GPIO_20 */ 271 "NFC_DWL_REQ", /* GPIO_21 */ 272 "CCI_TIMER1", /* GPIO_22 */ 273 "WEBCAM1_RESET_N", /* GPIO_23 */ 274 "ESE_IRQ", /* GPIO_24 */ 275 "NC", /* GPIO_25 */ 276 "WEBCAM1_STANDBY", /* GPIO_26 */ 277 "NC", /* GPIO_27 */ 278 "NC", /* GPIO_28 */ 279 "NC", /* GPIO_29 */ 280 "CAM_VDD_1P2_EN_2", /* GPIO_30 */ 281 "CAM_RESET_0", /* GPIO_31 */ 282 "CAM_RESET_1", /* GPIO_32 */ 283 "NC", /* GPIO_33 */ 284 "NC", /* GPIO_34 */ 285 "PCI_E0_RST_N", /* GPIO_35 */ 286 "PCI_E0_CLKREQ_N", /* GPIO_36 */ 287 "PCI_E0_WAKE", /* GPIO_37 */ 288 "CHARGER_INT", /* GPIO_38 */ 289 "CHARGER_RESET", /* GPIO_39 */ 290 "NC", /* GPIO_40 */ 291 "QCA_UART_TXD", /* GPIO_41 */ 292 "QCA_UART_RXD", /* GPIO_42 */ 293 "QCA_UART_CTS", /* GPIO_43 */ 294 "QCA_UART_RTS", /* GPIO_44 */ 295 "MAWC_UART_TX", /* GPIO_45 */ 296 "MAWC_UART_RX", /* GPIO_46 */ 297 "NC", /* GPIO_47 */ 298 "NC", /* GPIO_48 */ 299 "NC", /* GPIO_49 */ 300 "FP_SPI_RST", /* GPIO_50 */ 301 "TYPEC_I2C_SDA", /* GPIO_51 */ 302 "TYPEC_I2C_SCL", /* GPIO_52 */ 303 "CODEC_INT2_N", /* GPIO_53 */ 304 "CODEC_INT1_N", /* GPIO_54 */ 305 "APPS_I2C7_SDA", /* GPIO_55 */ 306 "APPS_I2C7_SCL", /* GPIO_56 */ 307 "FORCE_USB_BOOT", /* GPIO_57 */ 308 "NC", /* GPIO_58 */ 309 "NC", /* GPIO_59 */ 310 "NC", /* GPIO_60 */ 311 "NC", /* GPIO_61 */ 312 "ESE_RSTN", /* GPIO_62 */ 313 "TYPEC_INT", /* GPIO_63 */ 314 "CODEC_RESET_N", /* GPIO_64 */ 315 "PCM_CLK", /* GPIO_65 */ 316 "PCM_SYNC", /* GPIO_66 */ 317 "PCM_DIN", /* GPIO_67 */ 318 "PCM_DOUT", /* GPIO_68 */ 319 "CDC_44K1_CLK", /* GPIO_69 */ 320 "SLIMBUS_CLK", /* GPIO_70 */ 321 "SLIMBUS_DATA0", /* GPIO_71 */ 322 "SLIMBUS_DATA1", /* GPIO_72 */ 323 "LDO_5V_IN_EN", /* GPIO_73 */ 324 "TYPEC_EN_N", /* GPIO_74 */ 325 "NC", /* GPIO_75 */ 326 "NC", /* GPIO_76 */ 327 "NC", /* GPIO_77 */ 328 "NC", /* GPIO_78 */ 329 "NC", /* GPIO_79 */ 330 "SENSOR_RESET_N", /* GPIO_80 */ 331 "FP_SPI_MOSI", /* GPIO_81 */ 332 "FP_SPI_MISO", /* GPIO_82 */ 333 "FP_SPI_CS_N", /* GPIO_83 */ 334 "FP_SPI_CLK", /* GPIO_84 */ 335 "NC", /* GPIO_85 */ 336 "CAM_VDD_1P2_EN", /* GPIO_86 */ 337 "MSM_TS_I2C_SDA", /* GPIO_87 */ 338 "MSM_TS_I2C_SCL", /* GPIO_88 */ 339 "TS_RESOUT_N", /* GPIO_89 */ 340 "ESE_SPI_CS_N", /* GPIO_90 */ 341 "NC", /* GPIO_91 */ 342 "CAM2_AVDD_EN", /* GPIO_92 */ 343 "CAM2_VCM_EN", /* GPIO_93 */ 344 "NC", /* GPIO_94 */ 345 "NC", /* GPIO_95 */ 346 "NC", /* GPIO_96 */ 347 "GRFC_0", /* GPIO_97 */ 348 "GRFC_1", /* GPIO_98 */ 349 "NC", /* GPIO_99 */ 350 "GRFC_3", /* GPIO_100 */ 351 "GRFC_4", /* GPIO_101 */ 352 "GRFC_5", /* GPIO_102 */ 353 "NC", /* GPIO_103 */ 354 "GRFC_7", /* GPIO_104 */ 355 "UIM2_DATA", /* GPIO_105 */ 356 "UIM2_CLK", /* GPIO_106 */ 357 "UIM2_RESET", /* GPIO_107 */ 358 "UIM2_PRESENT", /* GPIO_108 */ 359 "UIM1_DATA", /* GPIO_109 */ 360 "UIM1_CLK", /* GPIO_110 */ 361 "UIM1_RESET", /* GPIO_111 */ 362 "UIM1_PRESENT", /* GPIO_112 */ 363 "UIM_BATT_ALARM", /* GPIO_113 */ 364 "GRFC_8", /* GPIO_114 */ 365 "GRFC_9", /* GPIO_115 */ 366 "TX_GTR_THRES", /* GPIO_116 */ 367 "ACCEL_INT", /* GPIO_117 */ 368 "GYRO_INT", /* GPIO_118 */ 369 "COMPASS_INT", /* GPIO_119 */ 370 "PROXIMITY_INT_N", /* GPIO_120 */ 371 "FP_IRQ", /* GPIO_121 */ 372 "P_SENSE", /* GPIO_122 */ 373 "HALL_INTR2", /* GPIO_123 */ 374 "HALL_INTR1", /* GPIO_124 */ 375 "TS_INT_N", /* GPIO_125 */ 376 "NC", /* GPIO_126 */ 377 "GRFC_11", /* GPIO_127 */ 378 "NC", /* GPIO_128 */ 379 "EXT_GPS_LNA_EN", /* GPIO_129 */ 380 "NC", /* GPIO_130 */ 381 "LCD_ID_DET2", /* GPIO_131 */ 382 "LCD_TE2", /* GPIO_132 */ 383 "GRFC_14", /* GPIO_133 */ 384 "GSM_TX2_PHASE_D", /* GPIO_134 */ 385 "NC", /* GPIO_135 */ 386 "GRFC_15", /* GPIO_136 */ 387 "RFFE3_DATA", /* GPIO_137 */ 388 "RFFE3_CLK", /* GPIO_138 */ 389 "NC", /* GPIO_139 */ 390 "NC", /* GPIO_140 */ 391 "RFFE5_DATA", /* GPIO_141 */ 392 "RFFE5_CLK", /* GPIO_142 */ 393 "NC", /* GPIO_143 */ 394 "COEX_UART_TX", /* GPIO_144 */ 395 "COEX_UART_RX", /* GPIO_145 */ 396 "RFFE2_DATA", /* GPIO_146 */ 397 "RFFE2_CLK", /* GPIO_147 */ 398 "RFFE1_DATA", /* GPIO_148 */ 399 "RFFE1_CLK"; /* GPIO_149 */ 400 401 touchscreen_default: touchscreen-default { 402 pins = "gpio89", "gpio125"; 403 function = "gpio"; 404 drive-strength = <10>; 405 bias-pull-up; 406 }; 407 408 touchscreen_sleep: touchscreen-sleep { 409 pins = "gpio89", "gpio125"; 410 function = "gpio"; 411 drive-strength = <2>; 412 bias-disable; 413 }; 414}; 415