1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com> 4 */ 5 6/dts-v1/; 7 8#include "msm8996.dtsi" 9#include "msm8996-xiaomi-common.dtsi" 10#include <dt-bindings/sound/qcom,q6afe.h> 11#include <dt-bindings/sound/qcom,q6asm.h> 12#include <dt-bindings/sound/qcom,wcd9335.h> 13#include <dt-bindings/input/ti-drv260x.h> 14 15/ { 16 model = "Xiaomi Mi 5"; 17 compatible = "xiaomi,gemini", "qcom,msm8996"; 18 chassis-type = "handset"; 19 qcom,msm-id = <246 0x30001>; 20 qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; 21 qcom,board-id = <31 0>; 22 23 clocks { 24 divclk2_haptics: divclk2 { 25 compatible = "fixed-clock"; 26 #clock-cells = <0>; 27 clock-frequency = <32768>; 28 clock-output-names = "divclk2"; 29 30 pinctrl-names = "default"; 31 pinctrl-0 = <&divclk2_pin_a>; 32 }; 33 }; 34}; 35 36&adsp_pil { 37 firmware-name = "qcom/msm8996/gemini/adsp.mbn"; 38}; 39 40&blsp2_i2c3 { 41 haptics: drv2604@5a { 42 compatible = "ti,drv2604"; 43 reg = <0x5a>; 44 enable-gpio = <&tlmm 93 0x00>; 45 mode = <DRV260X_LRA_MODE>; 46 library-sel = <DRV260X_LIB_LRA>; 47 pinctrl-names = "default","sleep"; 48 pinctrl-0 = <&vibrator_default>; 49 pinctrl-1 = <&vibrator_sleep>; 50 }; 51 52 lp5562@30 { 53 compatible = "ti,lp5562"; 54 reg = <0x30>; 55 #address-cells = <1>; 56 #size-cells = <0>; 57 enable-gpios = <&pm8994_gpios 7 1>; 58 clock-mode = /bits/8 <2>; 59 label = "button-backlight"; 60 61 led@0 { 62 reg = <0>; 63 chan-name = "button-backlight"; 64 led-cur = /bits/ 8 <0x32>; 65 max-cur = /bits/ 8 <0xc8>; 66 }; 67 68 led@1 { 69 reg = <0>; 70 chan-name = "button-backlight1"; 71 led-cur = /bits/ 8 <0x32>; 72 max-cur = /bits/ 8 <0xc8>; 73 }; 74 }; 75}; 76 77&blsp2_i2c6 { 78 synaptics@20 { 79 compatible = "syna,rmi4-i2c"; 80 reg = <0x20>; 81 #address-cells = <1>; 82 #size-cells = <0>; 83 interrupt-parent = <&tlmm>; 84 interrupts = <125 IRQ_TYPE_LEVEL_LOW>; 85 vdda-supply = <&vreg_l6a_1p8>; 86 vdd-supply = <&vdd_3v2_tp>; 87 reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; 88 89 pinctrl-names = "default", "sleep"; 90 pinctrl-0 = <&touchscreen_default>; 91 pinctrl-1 = <&touchscreen_sleep>; 92 }; 93 94}; 95 96&gpu { 97 zap-shader { 98 firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; 99 }; 100}; 101 102&mdss_dsi0 { 103 status = "okay"; 104 105 vdd-supply = <&vreg_l2a_1p25>; 106 vdda-supply = <&vreg_l19a_3p3>; 107 vddio-supply = <&vreg_l14a_1p8>; 108 109 pinctrl-names = "default", "sleep"; 110 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; 111 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; 112 113 panel: panel@0 { 114 compatible = "jdi,fhd-r63452"; 115 reg = <0>; 116 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; 117 backlight = <&pmi8994_wled>; 118 119 port { 120 panel_in: endpoint { 121 remote-endpoint = <&mdss_dsi0_out>; 122 }; 123 }; 124 }; 125}; 126 127&mdss_dsi0_out { 128 remote-endpoint = <&panel_in>; 129}; 130 131&pmi8994_wled { 132 status = "okay"; 133}; 134 135&mss_pil { 136 firmware-name = "qcom/msm8996/gemini/mba.mbn", 137 "qcom/msm8996/gemini/modem.mbn"; 138}; 139 140&q6asmdai { 141 dai@0 { 142 reg = <0>; 143 }; 144 145 dai@1 { 146 reg = <1>; 147 }; 148 149 dai@2 { 150 reg = <2>; 151 }; 152}; 153 154&slpi_pil { 155 firmware-name = "qcom/msm8996/gemini/slpi.mbn"; 156}; 157 158&sound { 159 compatible = "qcom,apq8096-sndcard"; 160 model = "gemini"; 161 audio-routing = "RX_BIAS", "MCLK", 162 "MM_DL1", "MultiMedia1 Playback", 163 "MM_DL2", "MultiMedia2 Playback", 164 "MultiMedia3 Capture", "MM_UL3"; 165 166 mm1-dai-link { 167 link-name = "MultiMedia1"; 168 cpu { 169 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; 170 }; 171 }; 172 173 mm2-dai-link { 174 link-name = "MultiMedia2"; 175 cpu { 176 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; 177 }; 178 }; 179 180 mm3-dai-link { 181 link-name = "MultiMedia3"; 182 cpu { 183 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; 184 }; 185 }; 186 187 slim-dai-link { 188 link-name = "SLIM Playback"; 189 cpu { 190 sound-dai = <&q6afedai SLIMBUS_6_RX>; 191 }; 192 193 platform { 194 sound-dai = <&q6routing>; 195 }; 196 197 codec { 198 sound-dai = <&wcd9335 AIF4_PB>; 199 }; 200 }; 201 202 slimcap-dai-link { 203 link-name = "SLIM Capture"; 204 cpu { 205 sound-dai = <&q6afedai SLIMBUS_0_TX>; 206 }; 207 208 platform { 209 sound-dai = <&q6routing>; 210 }; 211 212 codec { 213 sound-dai = <&wcd9335 AIF1_CAP>; 214 }; 215 }; 216}; 217 218&venus { 219 firmware-name = "qcom/msm8996/gemini/venus.mbn"; 220}; 221 222&rpm_requests { 223 regulators-0 { 224 vreg_l17a_2p8: l17 { 225 regulator-name = "vreg_l17a_2p8"; 226 regulator-min-microvolt = <2500000>; 227 regulator-max-microvolt = <2500000>; 228 }; 229 vreg_l29a_2p7: l29 { 230 regulator-name = "vreg_l29a_2p7"; 231 regulator-min-microvolt = <2800000>; 232 regulator-max-microvolt = <2800000>; 233 }; 234 }; 235}; 236 237&pm8994_gpios { 238 gpio-line-names = 239 "NC", /* GPIO_1 */ 240 "VOL_UP_N", /* GPIO_2 */ 241 "SPKR_ID", /* GPIO_3 */ 242 "PWM_HAPTICS", /* GPIO_4 */ 243 "INFARED_DRV", /* GPIO_5 */ 244 "NC", /* GPIO_6 */ 245 "KEYPAD_LED_EN", /* GPIO_7 */ 246 "WL_EN", /* GPIO_8 */ 247 "3P3_ENABLE", /* GPIO_9 */ 248 "FP_ID", /* GPIO_10 */ 249 "NC", /* GPIO_11 */ 250 "NC", /* GPIO_12 */ 251 "NC", /* GPIO_13 */ 252 "NC", /* GPIO_14 */ 253 "DIVCLK1_CDC", /* GPIO_15 */ 254 "DIVCLK2_HAPTICS", /* GPIO_16 */ 255 "NC", /* GPIO_17 */ 256 "32KHz_CLK_IN", /* GPIO_18 */ 257 "BT_EN", /* GPIO_19 */ 258 "PMIC_SLB", /* GPIO_20 */ 259 "UIM_BATT_ALARM", /* GPIO_21 */ 260 "NC"; /* GPIO_22 */ 261 262 divclk2_pin_a: divclk2-state { 263 pins = "gpio16"; 264 function = PMIC_GPIO_FUNC_FUNC2; 265 bias-disable; 266 power-source = <PM8994_GPIO_S4>; 267 }; 268}; 269 270&pm8994_mpps { 271 gpio-line-names = 272 "NC", /* MPP_1 */ 273 "CCI_TIMER1", /* MPP_2 */ 274 "PMIC_SLB", /* MPP_3 */ 275 "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ 276 "NC", /* MPP_5 */ 277 "NC", /* MPP_6 */ 278 "NC", /* MPP_7 */ 279 "NC"; /* MPP_8 */ 280}; 281 282&pmi8994_gpios { 283 gpio-line-names = 284 "NC", /* GPIO_1 */ 285 "SPKR_PA_RST", /* GPIO_2 */ 286 "NC", /* GPIO_3 */ 287 "NC", /* GPIO_4 */ 288 "NC", /* GPIO_5 */ 289 "NC", /* GPIO_6 */ 290 "NC", /* GPIO_7 */ 291 "NC", /* GPIO_8 */ 292 "NC", /* GPIO_9 */ 293 "NC"; /* GPIO_10 */ 294}; 295 296&tlmm { 297 gpio-line-names = 298 "ESE_SPI_MOSI", /* GPIO_0 */ 299 "ESE_SPI_MISO", /* GPIO_1 */ 300 "ERR_INT_N", /* GPIO_2 */ 301 "ESE_SPI_CLK", /* GPIO_3 */ 302 "MSM_UART_TX", /* GPIO_4 */ 303 "MSM_UART_RX", /* GPIO_5 */ 304 "NFC_I2C_SDA", /* GPIO_6 */ 305 "NFC_I2C_SCL", /* GPIO_7 */ 306 "LCD0_RESET_N", /* GPIO_8 */ 307 "NFC_IRQ", /* GPIO_9 */ 308 "LCD_TE", /* GPIO_10 */ 309 "LCD_ID_DET1", /* GPIO_11 */ 310 "NFC_DISABLE", /* GPIO_12 */ 311 "CAM_MCLK0", /* GPIO_13 */ 312 "NC", /* GPIO_14 */ 313 "CAM_MCLK2", /* GPIO_15 */ 314 "ESE_PWR_REQ", /* GPIO_16 */ 315 "CCI_I2C_SDA0", /* GPIO_17 */ 316 "CCI_I2C_SCL0", /* GPIO_18 */ 317 "CCI_I2C_SDA1", /* GPIO_19 */ 318 "CCI_I2C_SCL1", /* GPIO_20 */ 319 "NFC_DWL_REQ", /* GPIO_21 */ 320 "CCI_TIMER1", /* GPIO_22 */ 321 "WEBCAM1_RESET_N", /* GPIO_23 */ 322 "ESE_IRQ", /* GPIO_24 */ 323 "NC", /* GPIO_25 */ 324 "WEBCAM1_STANDBY", /* GPIO_26 */ 325 "NC", /* GPIO_27 */ 326 "NC", /* GPIO_28 */ 327 "NC", /* GPIO_29 */ 328 "CAM1_RST_N", /* GPIO_30 */ 329 "NC", /* GPIO_31 */ 330 "NC", /* GPIO_32 */ 331 "NC", /* GPIO_33 */ 332 "FP_DOME_SW", /* GPIO_34 */ 333 "PCI_E0_RST_N", /* GPIO_35 */ 334 "PCI_E0_CLKREQ_N", /* GPIO_36 */ 335 "PCI_E0_WAKE", /* GPIO_37 */ 336 "FM_INT_N", /* GPIO_38 */ 337 "FM_RESET_N", /* GPIO_39 */ 338 "NC", /* GPIO_40 */ 339 "QCA_UART_TXD", /* GPIO_41 */ 340 "QCA_UART_RXD", /* GPIO_42 */ 341 "QCA_UART_CTS", /* GPIO_43 */ 342 "QCA_UART_RTS", /* GPIO_44 */ 343 "MAWC_UART_TX", /* GPIO_45 */ 344 "MAWC_UART_RX", /* GPIO_46 */ 345 "NC", /* GPIO_47 */ 346 "NC", /* GPIO_48 */ 347 "AUDIO_SWITCH_EN", /* GPIO_49 */ 348 "FP_SPI_RST", /* GPIO_50 */ 349 "TYPEC_I2C_SDA", /* GPIO_51 */ 350 "TYPEC_I2C_SCL", /* GPIO_52 */ 351 "CODEC_INT2_N", /* GPIO_53 */ 352 "CODEC_INT1_N", /* GPIO_54 */ 353 "APPS_I2C7_SDA", /* GPIO_55 */ 354 "APPS_I2C7_SCL", /* GPIO_56 */ 355 "FORCE_USB_BOOT", /* GPIO_57 */ 356 "SPKR_I2S_BCK", /* GPIO_58 */ 357 "SPKR_I2S_WS", /* GPIO_59 */ 358 "SPKR_I2S_DOUT", /* GPIO_60 */ 359 "SPKR_I2S_DIN", /* GPIO_61 */ 360 "ESE_RSTN", /* GPIO_62 */ 361 "TYPEC_INT", /* GPIO_63 */ 362 "CODEC_RESET_N", /* GPIO_64 */ 363 "PCM_CLK", /* GPIO_65 */ 364 "PCM_SYNC", /* GPIO_66 */ 365 "PCM_DIN", /* GPIO_67 */ 366 "PCM_DOUT", /* GPIO_68 */ 367 "HIFI_CLK", /* GPIO_69 */ 368 "SLIMBUS_CLK", /* GPIO_70 */ 369 "SLIMBUS_DATA0", /* GPIO_71 */ 370 "SLIMBUS_DATA1", /* GPIO_72 */ 371 "LDO_5V_IN_EN", /* GPIO_73 */ 372 "NC", /* GPIO_74 */ 373 "FM_I2S_CLK", /* GPIO_75 */ 374 "FM_I2S_SYNC", /* GPIO_76 */ 375 "FM_I2S_DATA", /* GPIO_77 */ 376 "FM_STATUS", /* GPIO_78 */ 377 "NC", /* GPIO_79 */ 378 "SENSOR_RESET_N", /* GPIO_80 */ 379 "FP_SPI_MOSI", /* GPIO_81 */ 380 "FP_SPI_MISO", /* GPIO_82 */ 381 "FP_SPI_CS_N", /* GPIO_83 */ 382 "FP_SPI_CLK", /* GPIO_84 */ 383 "NC", /* GPIO_85 */ 384 "CAM_VDD_1P05_EN", /* GPIO_86 */ 385 "MSM_TS_I2C_SDA", /* GPIO_87 */ 386 "MSM_TS_I2C_SCL", /* GPIO_88 */ 387 "TS_RESOUT_N", /* GPIO_89 */ 388 "ESE_SPI_CS_N", /* GPIO_90 */ 389 "NC", /* GPIO_91 */ 390 "NC", /* GPIO_92 */ 391 "HAPTICS_EN", /* GPIO_93 */ 392 "NC", /* GPIO_94 */ 393 "NC", /* GPIO_95 */ 394 "NC", /* GPIO_96 */ 395 "NC", /* GPIO_97 */ 396 "GRFC_1", /* GPIO_98 */ 397 "NC", /* GPIO_99 */ 398 "GRFC_3", /* GPIO_100 */ 399 "GRFC_4", /* GPIO_101 */ 400 "NC", /* GPIO_102 */ 401 "NC", /* GPIO_103 */ 402 "GRFC_7", /* GPIO_104 */ 403 "UIM2_DATA", /* GPIO_105 */ 404 "UIM2_CLK", /* GPIO_106 */ 405 "UIM2_RESET", /* GPIO_107 */ 406 "UIM2_PRESENT", /* GPIO_108 */ 407 "UIM1_DATA", /* GPIO_109 */ 408 "UIM1_CLK", /* GPIO_110 */ 409 "UIM1_RESET", /* GPIO_111 */ 410 "UIM1_PRESENT", /* GPIO_112 */ 411 "UIM_BATT_ALARM", /* GPIO_113 */ 412 "GRFC_8", /* GPIO_114 */ 413 "GRFC_9", /* GPIO_115 */ 414 "TX_GTR_THRES", /* GPIO_116 */ 415 "ACCEL_INT", /* GPIO_117 */ 416 "GYRO_INT", /* GPIO_118 */ 417 "COMPASS_INT", /* GPIO_119 */ 418 "PROXIMITY_INT_N", /* GPIO_120 */ 419 "FP_IRQ", /* GPIO_121 */ 420 "NC", /* GPIO_122 */ 421 "HALL_INTR2", /* GPIO_123 */ 422 "HALL_INTR1", /* GPIO_124 */ 423 "TS_INT_N", /* GPIO_125 */ 424 "NC", /* GPIO_126 */ 425 "GRFC_11", /* GPIO_127 */ 426 "NC", /* GPIO_128 */ 427 "EXT_GPS_LNA_EN", /* GPIO_129 */ 428 "NC", /* GPIO_130 */ 429 "NC", /* GPIO_131 */ 430 "NC", /* GPIO_132 */ 431 "GRFC_14", /* GPIO_133 */ 432 "GSM_TX2_PHASE_D", /* GPIO_134 */ 433 "NC", /* GPIO_135 */ 434 "NC", /* GPIO_136 */ 435 "RFFE3_DATA", /* GPIO_137 */ 436 "RFFE3_CLK", /* GPIO_138 */ 437 "NC", /* GPIO_139 */ 438 "NC", /* GPIO_140 */ 439 "RFFE5_DATA", /* GPIO_141 */ 440 "RFFE5_CLK", /* GPIO_142 */ 441 "NC", /* GPIO_143 */ 442 "COEX_UART_TX", /* GPIO_144 */ 443 "COEX_UART_RX", /* GPIO_145 */ 444 "RFFE2_DATA", /* GPIO_146 */ 445 "RFFE2_CLK", /* GPIO_147 */ 446 "RFFE1_DATA", /* GPIO_148 */ 447 "RFFE1_CLK"; /* GPIO_149 */ 448 449 touchscreen_default: touchscreen-default-state { 450 pins = "gpio89", "gpio125"; 451 function = "gpio"; 452 drive-strength = <10>; 453 bias-pull-up; 454 }; 455 456 touchscreen_sleep: touchscreen-sleep-state { 457 pins = "gpio89", "gpio125"; 458 function = "gpio"; 459 drive-strength = <2>; 460 bias-disable; 461 }; 462 463 vibrator_default: vibrator-default-state { 464 pins = "gpio93"; 465 function = "gpio"; 466 drive-strength = <8>; 467 bias-pull-up; 468 }; 469 470 vibrator_sleep: vibrator-sleep-state { 471 pins = "gpio93"; 472 function = "gpio"; 473 drive-strength = <2>; 474 bias-disable; 475 }; 476}; 477