1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com> 4 */ 5 6/dts-v1/; 7 8#include "msm8996-xiaomi-common.dtsi" 9#include <dt-bindings/sound/qcom,q6afe.h> 10#include <dt-bindings/sound/qcom,q6asm.h> 11#include <dt-bindings/input/ti-drv260x.h> 12 13/ { 14 model = "Xiaomi Mi 5"; 15 compatible = "xiaomi,gemini", "qcom,msm8996"; 16 chassis-type = "handset"; 17 qcom,msm-id = <246 0x30001>; 18 qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; 19 qcom,board-id = <31 0>; 20 21 clocks { 22 divclk2_haptics: divclk2 { 23 compatible = "fixed-clock"; 24 #clock-cells = <0>; 25 clock-frequency = <32768>; 26 clock-output-names = "divclk2"; 27 28 pinctrl-names = "default"; 29 pinctrl-0 = <&divclk2_pin_a>; 30 }; 31 }; 32}; 33 34&adsp_pil { 35 firmware-name = "qcom/msm8996/gemini/adsp.mbn"; 36}; 37 38&blsp2_i2c3 { 39 haptics: drv2604@5a { 40 compatible = "ti,drv2604"; 41 reg = <0x5a>; 42 enable-gpio = <&tlmm 93 0x00>; 43 mode = <DRV260X_LRA_MODE>; 44 library-sel = <DRV260X_LIB_LRA>; 45 pinctrl-names = "default","sleep"; 46 pinctrl-0 = <&vibrator_default>; 47 pinctrl-1 = <&vibrator_sleep>; 48 }; 49 50 lp5562@30 { 51 compatible = "ti,lp5562"; 52 reg = <0x30>; 53 #address-cells = <1>; 54 #size-cells = <0>; 55 enable-gpio = <&pm8994_gpios 7 1>; 56 clock-mode = /bits/8 <2>; 57 label = "button-backlight"; 58 59 led@0 { 60 reg = <0>; 61 chan-name = "button-backlight"; 62 led-cur = /bits/ 8 <0x32>; 63 max-cur = /bits/ 8 <0xC8>; 64 }; 65 66 led@1 { 67 reg = <0>; 68 chan-name = "button-backlight1"; 69 led-cur = /bits/ 8 <0x32>; 70 max-cur = /bits/ 8 <0xC8>; 71 }; 72 }; 73}; 74 75&blsp2_i2c6 { 76 synaptics@20 { 77 compatible = "syna,rmi4-i2c"; 78 reg = <0x20>; 79 #address-cells = <1>; 80 #size-cells = <0>; 81 interrupt-parent = <&tlmm>; 82 interrupts = <125 IRQ_TYPE_LEVEL_LOW>; 83 vdda-supply = <&vreg_l6a_1p8>; 84 vdd-supply = <&vdd_3v2_tp>; 85 reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; 86 87 pinctrl-names = "default", "sleep"; 88 pinctrl-0 = <&touchscreen_default>; 89 pinctrl-1 = <&touchscreen_sleep>; 90 }; 91 92}; 93 94&dsi0 { 95 status = "okay"; 96 97 vdd-supply = <&vreg_l2a_1p25>; 98 vdda-supply = <&vreg_l19a_3p3>; 99 vddio-supply = <&vreg_l14a_1p8>; 100 101 pinctrl-names = "default", "sleep"; 102 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; 103 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; 104 105 panel: panel@0 { 106 compatible = "jdi,fhd-r63452"; 107 reg = <0>; 108 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; 109 backlight = <&pmi8994_wled>; 110 111 port { 112 panel_in: endpoint { 113 remote-endpoint = <&dsi0_out>; 114 }; 115 }; 116 }; 117}; 118 119&dsi0_out { 120 remote-endpoint = <&panel_in>; 121}; 122 123&gpu { 124 zap-shader { 125 firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; 126 }; 127}; 128 129&pmi8994_wled { 130 status = "okay"; 131}; 132 133&q6asmdai { 134 dai@0 { 135 reg = <0>; 136 }; 137 138 dai@1 { 139 reg = <1>; 140 }; 141 142 dai@2 { 143 reg = <2>; 144 }; 145}; 146 147&sound { 148 compatible = "qcom,apq8096-sndcard"; 149 model = "gemini"; 150 audio-routing = "RX_BIAS", "MCLK", 151 "MM_DL1", "MultiMedia1 Playback", 152 "MM_DL2", "MultiMedia2 Playback", 153 "MultiMedia3 Capture", "MM_UL3"; 154 155 mm1-dai-link { 156 link-name = "MultiMedia1"; 157 cpu { 158 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; 159 }; 160 }; 161 162 mm2-dai-link { 163 link-name = "MultiMedia2"; 164 cpu { 165 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; 166 }; 167 }; 168 169 mm3-dai-link { 170 link-name = "MultiMedia3"; 171 cpu { 172 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; 173 }; 174 }; 175 176 slim-dai-link { 177 link-name = "SLIM Playback"; 178 cpu { 179 sound-dai = <&q6afedai SLIMBUS_6_RX>; 180 }; 181 182 platform { 183 sound-dai = <&q6routing>; 184 }; 185 186 codec { 187 sound-dai = <&wcd9335 6>; 188 }; 189 }; 190 191 slimcap-dai-link { 192 link-name = "SLIM Capture"; 193 cpu { 194 sound-dai = <&q6afedai SLIMBUS_0_TX>; 195 }; 196 197 platform { 198 sound-dai = <&q6routing>; 199 }; 200 201 codec { 202 sound-dai = <&wcd9335 1>; 203 }; 204 }; 205}; 206 207&venus { 208 firmware-name = "qcom/msm8996/gemini/venus.mbn"; 209}; 210 211&rpm_requests { 212 pm8994-regulators { 213 vreg_l17a_2p8: l17 { 214 regulator-name = "vreg_l17a_2p8"; 215 regulator-min-microvolt = <2500000>; 216 regulator-max-microvolt = <2500000>; 217 }; 218 vreg_l29a_2p7: l29 { 219 regulator-name = "vreg_l29a_2p7"; 220 regulator-min-microvolt = <2800000>; 221 regulator-max-microvolt = <2800000>; 222 }; 223 }; 224}; 225 226&pm8994_gpios { 227 gpio-line-names = 228 "NC", /* GPIO_1 */ 229 "VOL_UP_N", /* GPIO_2 */ 230 "SPKR_ID", /* GPIO_3 */ 231 "PWM_HAPTICS", /* GPIO_4 */ 232 "INFARED_DRV", /* GPIO_5 */ 233 "NC", /* GPIO_6 */ 234 "KEYPAD_LED_EN", /* GPIO_7 */ 235 "WL_EN", /* GPIO_8 */ 236 "3P3_ENABLE", /* GPIO_9 */ 237 "FP_ID", /* GPIO_10 */ 238 "NC", /* GPIO_11 */ 239 "NC", /* GPIO_12 */ 240 "NC", /* GPIO_13 */ 241 "NC", /* GPIO_14 */ 242 "DIVCLK1_CDC", /* GPIO_15 */ 243 "DIVCLK2_HAPTICS", /* GPIO_16 */ 244 "NC", /* GPIO_17 */ 245 "32KHz_CLK_IN", /* GPIO_18 */ 246 "BT_EN", /* GPIO_19 */ 247 "PMIC_SLB", /* GPIO_20 */ 248 "UIM_BATT_ALARM", /* GPIO_21 */ 249 "NC"; /* GPIO_22 */ 250 251 divclk2_pin_a: divclk2 { 252 pins = "gpio16"; 253 function = PMIC_GPIO_FUNC_FUNC2; 254 bias-disable; 255 power-source = <PM8994_GPIO_S4>; 256 }; 257}; 258 259&pm8994_mpps { 260 gpio-line-names = 261 "NC", /* MPP_1 */ 262 "CCI_TIMER1", /* MPP_2 */ 263 "PMIC_SLB", /* MPP_3 */ 264 "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ 265 "NC", /* MPP_5 */ 266 "NC", /* MPP_6 */ 267 "NC", /* MPP_7 */ 268 "NC"; /* MPP_8 */ 269}; 270 271&pmi8994_gpios { 272 gpio-line-names = 273 "NC", /* GPIO_1 */ 274 "SPKR_PA_RST", /* GPIO_2 */ 275 "NC", /* GPIO_3 */ 276 "NC", /* GPIO_4 */ 277 "NC", /* GPIO_5 */ 278 "NC", /* GPIO_6 */ 279 "NC", /* GPIO_7 */ 280 "NC", /* GPIO_8 */ 281 "NC", /* GPIO_9 */ 282 "NC"; /* GPIO_10 */ 283}; 284 285&tlmm { 286 gpio-line-names = 287 "ESE_SPI_MOSI", /* GPIO_0 */ 288 "ESE_SPI_MISO", /* GPIO_1 */ 289 "ERR_INT_N", /* GPIO_2 */ 290 "ESE_SPI_CLK", /* GPIO_3 */ 291 "MSM_UART_TX", /* GPIO_4 */ 292 "MSM_UART_RX", /* GPIO_5 */ 293 "NFC_I2C_SDA", /* GPIO_6 */ 294 "NFC_I2C_SCL", /* GPIO_7 */ 295 "LCD0_RESET_N", /* GPIO_8 */ 296 "NFC_IRQ", /* GPIO_9 */ 297 "LCD_TE", /* GPIO_10 */ 298 "LCD_ID_DET1", /* GPIO_11 */ 299 "NFC_DISABLE", /* GPIO_12 */ 300 "CAM_MCLK0", /* GPIO_13 */ 301 "NC", /* GPIO_14 */ 302 "CAM_MCLK2", /* GPIO_15 */ 303 "ESE_PWR_REQ", /* GPIO_16 */ 304 "CCI_I2C_SDA0", /* GPIO_17 */ 305 "CCI_I2C_SCL0", /* GPIO_18 */ 306 "CCI_I2C_SDA1", /* GPIO_19 */ 307 "CCI_I2C_SCL1", /* GPIO_20 */ 308 "NFC_DWL_REQ", /* GPIO_21 */ 309 "CCI_TIMER1", /* GPIO_22 */ 310 "WEBCAM1_RESET_N", /* GPIO_23 */ 311 "ESE_IRQ", /* GPIO_24 */ 312 "NC", /* GPIO_25 */ 313 "WEBCAM1_STANDBY", /* GPIO_26 */ 314 "NC", /* GPIO_27 */ 315 "NC", /* GPIO_28 */ 316 "NC", /* GPIO_29 */ 317 "CAM1_RST_N", /* GPIO_30 */ 318 "NC", /* GPIO_31 */ 319 "NC", /* GPIO_32 */ 320 "NC", /* GPIO_33 */ 321 "FP_DOME_SW", /* GPIO_34 */ 322 "PCI_E0_RST_N", /* GPIO_35 */ 323 "PCI_E0_CLKREQ_N", /* GPIO_36 */ 324 "PCI_E0_WAKE", /* GPIO_37 */ 325 "FM_INT_N", /* GPIO_38 */ 326 "FM_RESET_N", /* GPIO_39 */ 327 "NC", /* GPIO_40 */ 328 "QCA_UART_TXD", /* GPIO_41 */ 329 "QCA_UART_RXD", /* GPIO_42 */ 330 "QCA_UART_CTS", /* GPIO_43 */ 331 "QCA_UART_RTS", /* GPIO_44 */ 332 "MAWC_UART_TX", /* GPIO_45 */ 333 "MAWC_UART_RX", /* GPIO_46 */ 334 "NC", /* GPIO_47 */ 335 "NC", /* GPIO_48 */ 336 "AUDIO_SWITCH_EN", /* GPIO_49 */ 337 "FP_SPI_RST", /* GPIO_50 */ 338 "TYPEC_I2C_SDA", /* GPIO_51 */ 339 "TYPEC_I2C_SCL", /* GPIO_52 */ 340 "CODEC_INT2_N", /* GPIO_53 */ 341 "CODEC_INT1_N", /* GPIO_54 */ 342 "APPS_I2C7_SDA", /* GPIO_55 */ 343 "APPS_I2C7_SCL", /* GPIO_56 */ 344 "FORCE_USB_BOOT", /* GPIO_57 */ 345 "SPKR_I2S_BCK", /* GPIO_58 */ 346 "SPKR_I2S_WS", /* GPIO_59 */ 347 "SPKR_I2S_DOUT", /* GPIO_60 */ 348 "SPKR_I2S_DIN", /* GPIO_61 */ 349 "ESE_RSTN", /* GPIO_62 */ 350 "TYPEC_INT", /* GPIO_63 */ 351 "CODEC_RESET_N", /* GPIO_64 */ 352 "PCM_CLK", /* GPIO_65 */ 353 "PCM_SYNC", /* GPIO_66 */ 354 "PCM_DIN", /* GPIO_67 */ 355 "PCM_DOUT", /* GPIO_68 */ 356 "HIFI_CLK", /* GPIO_69 */ 357 "SLIMBUS_CLK", /* GPIO_70 */ 358 "SLIMBUS_DATA0", /* GPIO_71 */ 359 "SLIMBUS_DATA1", /* GPIO_72 */ 360 "LDO_5V_IN_EN", /* GPIO_73 */ 361 "NC", /* GPIO_74 */ 362 "FM_I2S_CLK", /* GPIO_75 */ 363 "FM_I2S_SYNC", /* GPIO_76 */ 364 "FM_I2S_DATA", /* GPIO_77 */ 365 "FM_STATUS", /* GPIO_78 */ 366 "NC", /* GPIO_79 */ 367 "SENSOR_RESET_N", /* GPIO_80 */ 368 "FP_SPI_MOSI", /* GPIO_81 */ 369 "FP_SPI_MISO", /* GPIO_82 */ 370 "FP_SPI_CS_N", /* GPIO_83 */ 371 "FP_SPI_CLK", /* GPIO_84 */ 372 "NC", /* GPIO_85 */ 373 "CAM_VDD_1P05_EN", /* GPIO_86 */ 374 "MSM_TS_I2C_SDA", /* GPIO_87 */ 375 "MSM_TS_I2C_SCL", /* GPIO_88 */ 376 "TS_RESOUT_N", /* GPIO_89 */ 377 "ESE_SPI_CS_N", /* GPIO_90 */ 378 "NC", /* GPIO_91 */ 379 "NC", /* GPIO_92 */ 380 "HAPTICS_EN", /* GPIO_93 */ 381 "NC", /* GPIO_94 */ 382 "NC", /* GPIO_95 */ 383 "NC", /* GPIO_96 */ 384 "NC", /* GPIO_97 */ 385 "GRFC_1", /* GPIO_98 */ 386 "NC", /* GPIO_99 */ 387 "GRFC_3", /* GPIO_100 */ 388 "GRFC_4", /* GPIO_101 */ 389 "NC", /* GPIO_102 */ 390 "NC", /* GPIO_103 */ 391 "GRFC_7", /* GPIO_104 */ 392 "UIM2_DATA", /* GPIO_105 */ 393 "UIM2_CLK", /* GPIO_106 */ 394 "UIM2_RESET", /* GPIO_107 */ 395 "UIM2_PRESENT", /* GPIO_108 */ 396 "UIM1_DATA", /* GPIO_109 */ 397 "UIM1_CLK", /* GPIO_110 */ 398 "UIM1_RESET", /* GPIO_111 */ 399 "UIM1_PRESENT", /* GPIO_112 */ 400 "UIM_BATT_ALARM", /* GPIO_113 */ 401 "GRFC_8", /* GPIO_114 */ 402 "GRFC_9", /* GPIO_115 */ 403 "TX_GTR_THRES", /* GPIO_116 */ 404 "ACCEL_INT", /* GPIO_117 */ 405 "GYRO_INT", /* GPIO_118 */ 406 "COMPASS_INT", /* GPIO_119 */ 407 "PROXIMITY_INT_N", /* GPIO_120 */ 408 "FP_IRQ", /* GPIO_121 */ 409 "NC", /* GPIO_122 */ 410 "HALL_INTR2", /* GPIO_123 */ 411 "HALL_INTR1", /* GPIO_124 */ 412 "TS_INT_N", /* GPIO_125 */ 413 "NC", /* GPIO_126 */ 414 "GRFC_11", /* GPIO_127 */ 415 "NC", /* GPIO_128 */ 416 "EXT_GPS_LNA_EN", /* GPIO_129 */ 417 "NC", /* GPIO_130 */ 418 "NC", /* GPIO_131 */ 419 "NC", /* GPIO_132 */ 420 "GRFC_14", /* GPIO_133 */ 421 "GSM_TX2_PHASE_D", /* GPIO_134 */ 422 "NC", /* GPIO_135 */ 423 "NC", /* GPIO_136 */ 424 "RFFE3_DATA", /* GPIO_137 */ 425 "RFFE3_CLK", /* GPIO_138 */ 426 "NC", /* GPIO_139 */ 427 "NC", /* GPIO_140 */ 428 "RFFE5_DATA", /* GPIO_141 */ 429 "RFFE5_CLK", /* GPIO_142 */ 430 "NC", /* GPIO_143 */ 431 "COEX_UART_TX", /* GPIO_144 */ 432 "COEX_UART_RX", /* GPIO_145 */ 433 "RFFE2_DATA", /* GPIO_146 */ 434 "RFFE2_CLK", /* GPIO_147 */ 435 "RFFE1_DATA", /* GPIO_148 */ 436 "RFFE1_CLK"; /* GPIO_149 */ 437 438 touchscreen_default: touchscreen_default { 439 pins = "gpio89", "gpio125"; 440 function = "gpio"; 441 drive-strength = <10>; 442 bias-pull-up; 443 }; 444 445 touchscreen_sleep: touchscreen_sleep { 446 pins = "gpio89", "gpio125"; 447 function = "gpio"; 448 drive-strength = <2>; 449 bias-disable; 450 }; 451 452 vibrator_default: vibrator_default { 453 pins = "gpio93"; 454 function = "gpio"; 455 drive-strength = <8>; 456 bias-pull-up; 457 }; 458 459 vibrator_sleep: vibrator_sleep { 460 pins = "gpio93"; 461 function = "gpio"; 462 drive-strength = <2>; 463 bias-disable; 464 }; 465}; 466