1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> 4 */ 5 6#include "pm8994.dtsi" 7#include "pmi8994.dtsi" 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/leds/common.h> 11#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 12 13/ { 14 clocks { 15 divclk1_cdc: divclk1 { 16 compatible = "gpio-gate-clock"; 17 clocks = <&rpmcc RPM_SMD_DIV_CLK1>; 18 #clock-cells = <0>; 19 enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; 20 21 pinctrl-names = "default"; 22 pinctrl-0 = <&divclk1_default>; 23 }; 24 25 divclk4: divclk4 { 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; 28 clock-frequency = <32768>; 29 clock-output-names = "divclk4"; 30 31 pinctrl-names = "default"; 32 pinctrl-0 = <&divclk4_pin_a>; 33 }; 34 }; 35 36 gpio-keys { 37 compatible = "gpio-keys"; 38 39 key-vol-up { 40 label = "Volume Up"; 41 gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; 42 linux,code = <KEY_VOLUMEUP>; 43 wakeup-source; 44 debounce-interval = <15>; 45 }; 46 47 key-dome { 48 label = "Home"; 49 gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; 50 linux,code = <KEY_HOME>; 51 wakeup-source; 52 debounce-interval = <15>; 53 }; 54 }; 55 56 irled { 57 compatible = "pwm-ir-tx"; 58 pwms = <&pm8994_lpg 1 1000000>; 59 60 pinctrl-names = "default"; 61 pinctrl-0 = <&irled_default>; 62 }; 63 64 reserved-memory { 65 memory@88800000 { 66 reg = <0x0 0x88800000 0x0 0x1400000>; 67 no-map; 68 }; 69 70 /* This platform has all PIL regions offset by 0x1400000 */ 71 /delete-node/ mpss@88800000; 72 mpss_mem: mpss@89c00000 { 73 reg = <0x0 0x89c00000 0x0 0x6200000>; 74 no-map; 75 }; 76 77 /delete-node/ adsp@8ea00000; 78 adsp_mem: adsp@8fe00000 { 79 reg = <0x0 0x8fe00000 0x0 0x1b00000>; 80 no-map; 81 }; 82 83 /delete-node/ slpi@90500000; 84 slpi_mem: slpi@91900000 { 85 reg = <0x0 0x91900000 0x0 0xa00000>; 86 no-map; 87 }; 88 89 /delete-node/ gpu@90f00000; 90 gpu_mem: gpu@92300000 { 91 compatible = "shared-dma-pool"; 92 reg = <0x0 0x92300000 0x0 0x2000>; 93 no-map; 94 }; 95 96 /delete-node/ venus@91000000; 97 venus_mem: venus@92400000 { 98 reg = <0x0 0x92400000 0x0 0x500000>; 99 no-map; 100 }; 101 102 ramoops@92900000 { 103 compatible = "ramoops"; 104 reg = <0x0 0x92900000 0x0 0x100000>; 105 no-map; 106 107 record-size = <0x8000>; 108 console-size = <0x80000>; 109 ftrace-size = <0x20000>; 110 pmsg-size = <0x40000>; 111 }; 112 113 /delete-node/ rmtfs; 114 rmtfs@f6c00000 { 115 compatible = "qcom,rmtfs-mem"; 116 reg = <0 0xf6c00000 0 0x200000>; 117 no-map; 118 119 qcom,client-id = <1>; 120 qcom,vmid = <15>; 121 }; 122 123 /delete-node/ mba@91500000; 124 mba_mem: mba@f6f00000 { 125 reg = <0x0 0xf6f00000 0x0 0x100000>; 126 no-map; 127 }; 128 }; 129 130 vph_pwr: vph-pwr-regulator { 131 compatible = "regulator-fixed"; 132 regulator-name = "vph_pwr"; 133 regulator-min-microvolt = <3800000>; 134 regulator-max-microvolt = <3800000>; 135 regulator-always-on; 136 regulator-boot-on; 137 }; 138 139 vdd_3v2_tp: vdd-3v2-tp { 140 compatible = "regulator-fixed"; 141 regulator-name = "vdd_3v2_tp"; 142 regulator-min-microvolt = <3200000>; 143 regulator-max-microvolt = <3200000>; 144 startup-delay-us = <4000>; 145 vin-supply = <&vph_pwr>; 146 147 gpio = <&tlmm 73 0>; 148 enable-active-high; 149 }; 150 151 vdd_3v3: rome-vreg { 152 compatible = "regulator-fixed"; 153 regulator-name = "vdd_3v3"; 154 regulator-min-microvolt = <3300000>; 155 regulator-max-microvolt = <3300000>; 156 startup-delay-us = <4000>; 157 vin-supply = <&vph_pwr_bbyp>; 158 159 gpio = <&pm8994_gpios 9 0>; 160 enable-active-high; 161 pinctrl-names = "default"; 162 pinctrl-0 = <&rome_enable_default>; 163 164 /* Required by QCA6174a - vddpe-3v3 */ 165 regulator-always-on; 166 }; 167 168 /* WL_EN pin defined as a fixed regulator */ 169 wlan_en: wlan-en-1-8v { 170 compatible = "regulator-fixed"; 171 regulator-name = "wlan-en-regulator"; 172 regulator-min-microvolt = <1800000>; 173 regulator-max-microvolt = <1800000>; 174 175 gpio = <&pm8994_gpios 8 0>; 176 /* WLAN card specific delay */ 177 startup-delay-us = <70000>; 178 enable-active-high; 179 pinctrl-names = "default"; 180 pinctrl-0 = <&wlan_en_default>; 181 }; 182}; 183 184&adsp_pil { 185 status = "okay"; 186}; 187 188&blsp2_i2c2 { 189 status = "okay"; 190 label = "NFC_I2C"; 191 clock-frequency = <400000>; 192 193 nfc: pn548@28 { 194 compatible = "nxp,nxp-nci-i2c"; 195 196 reg = <0x28>; 197 198 interrupt-parent = <&tlmm>; 199 interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; 200 201 enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; 202 firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; 203 204 pinctrl-names = "default"; 205 pinctrl-0 = <&nfc_default>; 206 }; 207}; 208 209&blsp2_i2c3 { 210 status = "okay"; 211 label = "TYPEC_I2C"; 212 213 typec: tusb320l@47 { 214 compatible = "ti,tusb320l"; 215 reg = <0x47>; 216 interrupt-parent = <&tlmm>; 217 interrupts = <63 IRQ_TYPE_EDGE_RISING>; 218 }; 219}; 220 221&blsp2_i2c6 { 222 status = "okay"; 223 label = "MSM_TS_I2C"; 224}; 225 226&blsp1_uart2 { 227 status = "okay"; 228 label = "QCA_UART"; 229 230 bluetooth: bluetooth { 231 compatible = "qcom,qca6174-bt"; 232 233 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; 234 clocks = <&divclk4>; 235 }; 236}; 237 238&dsi0 { 239 status = "okay"; 240 241 vdd-supply = <&vreg_l2a_1p25>; 242 vddio-supply = <&vreg_l14a_1p8>; 243 244 pinctrl-names = "default", "sleep"; 245 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; 246 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; 247}; 248 249&dsi0_out { 250 status = "okay"; 251 252 data-lanes = <0 1 2 3>; 253}; 254 255&dsi0_phy { 256 status = "okay"; 257 258 vcca-supply = <&vreg_l28a_0p925>; 259}; 260 261&gpu { 262 status = "okay"; 263}; 264 265&mdss { 266 status = "okay"; 267}; 268 269&mmcc { 270 vdd-gfx-supply = <&vdd_gfx>; 271}; 272 273&mss_pil { 274 status = "okay"; 275 276 pll-supply = <&vreg_l12a_1p8>; 277}; 278 279&pcie0 { 280 status = "okay"; 281 282 /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ 283 vddpe-3v3-supply = <&wlan_en>; 284 vdda-supply = <&vreg_l28a_0p925>; 285 286 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; 287 wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; 288}; 289 290&pcie_phy { 291 status = "okay"; 292 293 vdda-phy-supply = <&vreg_l28a_0p925>; 294 vdda-pll-supply = <&vreg_l12a_1p8>; 295}; 296 297&pm8994_resin { 298 status = "okay"; 299 300 linux,code = <KEY_VOLUMEDOWN>; 301}; 302 303&pm8994_lpg { 304 status = "okay"; 305 306 qcom,power-source = <1>; 307}; 308 309&pmi8994_lpg { 310 status = "okay"; 311 312 qcom,power-source = <1>; 313 314 multi-led { 315 color = <LED_COLOR_ID_RGB>; 316 function = LED_FUNCTION_STATUS; 317 318 #address-cells = <1>; 319 #size-cells = <0>; 320 321 led@1 { 322 reg = <1>; 323 color = <LED_COLOR_ID_BLUE>; 324 }; 325 326 led@2 { 327 reg = <2>; 328 color = <LED_COLOR_ID_GREEN>; 329 }; 330 331 led@3 { 332 reg = <3>; 333 color = <LED_COLOR_ID_RED>; 334 }; 335 }; 336}; 337 338&slim_msm { 339 status = "okay"; 340 341 slim@1 { 342 reg = <1>; 343 #address-cells = <2>; 344 #size-cells = <0>; 345 346 tasha_ifd: tas-ifd@0,0 { 347 compatible = "slim217,1a0"; 348 reg = <0 0>; 349 }; 350 351 wcd9335: codec@1,0 { 352 compatible = "slim217,1a0"; 353 reg = <1 0>; 354 355 clock-names = "mclk", "slimbus"; 356 clocks = <&divclk1_cdc>, 357 <&rpmcc RPM_SMD_BB_CLK1>; 358 interrupt-parent = <&tlmm>; 359 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, 360 <53 IRQ_TYPE_LEVEL_HIGH>; 361 interrupt-names = "intr1", "intr2"; 362 interrupt-controller; 363 #interrupt-cells = <1>; 364 365 pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; 366 pinctrl-names = "default"; 367 368 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; 369 slim-ifc-dev = <&tasha_ifd>; 370 371 #sound-dai-cells = <1>; 372 373 vdd-buck-supply = <&vreg_s4a_1p8>; 374 vdd-buck-sido-supply = <&vreg_s4a_1p8>; 375 vdd-rx-supply = <&vreg_s4a_1p8>; 376 vdd-tx-supply = <&vreg_s4a_1p8>; 377 vdd-vbat-supply = <&vph_pwr>; 378 vdd-micbias-supply = <&vph_pwr_bbyp>; 379 vdd-io-supply = <&vreg_s4a_1p8>; 380 }; 381 }; 382}; 383 384&slpi_pil { 385 status = "okay"; 386 387 px-supply = <&vreg_lvs2a_1p8>; 388}; 389 390&usb3 { 391 status = "okay"; 392 extcon = <&typec>; 393 394 qcom,select-utmi-as-pipe-clk; 395}; 396 397&usb3_dwc3 { 398 extcon = <&typec>; 399 400 /* usb3-phy is not used on this device */ 401 phys = <&hsusb_phy1>; 402 phy-names = "usb2-phy"; 403 404 maximum-speed = "high-speed"; 405 snps,is-utmi-l1-suspend; 406 snps,usb2-gadget-lpm-disable; 407 snps,hird-threshold = /bits/ 8 <0>; 408}; 409 410&hsusb_phy1 { 411 status = "okay"; 412 extcon = <&typec>; 413 414 vdda-pll-supply = <&vreg_l12a_1p8>; 415 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; 416}; 417 418&ufshc { 419 status = "okay"; 420 421 vcc-supply = <&vreg_l20a_2p95>; 422 vccq-supply = <&vreg_l25a_1p2>; 423 vccq2-supply = <&vreg_s4a_1p8>; 424 425 vcc-max-microamp = <600000>; 426 vccq-max-microamp = <450000>; 427 vccq2-max-microamp = <450000>; 428}; 429 430&ufsphy { 431 status = "okay"; 432 433 vdda-phy-supply = <&vreg_l28a_0p925>; 434 vdda-pll-supply = <&vreg_l12a_1p8>; 435 vddp-ref-clk-supply = <&vreg_l25a_1p2>; 436}; 437 438&venus { 439 status = "okay"; 440}; 441 442&rpm_requests { 443 regulators-0 { 444 compatible = "qcom,rpm-pm8994-regulators"; 445 446 vdd_s1-supply = <&vph_pwr>; 447 vdd_s2-supply = <&vph_pwr>; 448 vdd_s3-supply = <&vph_pwr>; 449 vdd_s4-supply = <&vph_pwr>; 450 vdd_s5-supply = <&vph_pwr>; 451 vdd_s6-supply = <&vph_pwr>; 452 vdd_s7-supply = <&vph_pwr>; 453 vdd_s8-supply = <&vph_pwr>; 454 vdd_s9-supply = <&vph_pwr>; 455 vdd_s10-supply = <&vph_pwr>; 456 vdd_s11-supply = <&vph_pwr>; 457 vdd_s12-supply = <&vph_pwr>; 458 vdd_l1-supply = <&vreg_s1b_1p025>; 459 vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; 460 vdd_l3_l11-supply = <&vreg_s3a_1p3>; 461 vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; 462 vdd_l5_l7-supply = <&vreg_s5a_2p15>; 463 vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; 464 vdd_l8_l16_l30-supply = <&vph_pwr>; 465 vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; 466 vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; 467 vdd_l14_l15-supply = <&vreg_s5a_2p15>; 468 vdd_l17_l29-supply = <&vph_pwr_bbyp>; 469 vdd_l20_l21-supply = <&vph_pwr_bbyp>; 470 vdd_l25-supply = <&vreg_s3a_1p3>; 471 vdd_lvs1_2-supply = <&vreg_s4a_1p8>; 472 473 vreg_s3a_1p3: s3 { 474 regulator-name = "vreg_s3a_1p3"; 475 regulator-min-microvolt = <1300000>; 476 regulator-max-microvolt = <1300000>; 477 478 /* Required by QCA6174a - vdd-core */ 479 regulator-always-on; 480 }; 481 vreg_s4a_1p8: s4 { 482 regulator-name = "vreg_s4a_1p8"; 483 regulator-min-microvolt = <1800000>; 484 regulator-max-microvolt = <1800000>; 485 regulator-allow-set-load; 486 487 /* Required by QCA6174a - vddio */ 488 regulator-always-on; 489 }; 490 vreg_s5a_2p15: s5 { 491 regulator-name = "vreg_s5a_2p15"; 492 regulator-min-microvolt = <2150000>; 493 regulator-max-microvolt = <2150000>; 494 }; 495 vreg_s7a_0p8: s7 { 496 regulator-name = "vreg_s7a_0p8"; 497 regulator-min-microvolt = <800000>; 498 regulator-max-microvolt = <800000>; 499 }; 500 vreg_l1a_1p0: l1 { 501 regulator-name = "vreg_l1a_1p0"; 502 regulator-min-microvolt = <1000000>; 503 regulator-max-microvolt = <1000000>; 504 }; 505 vreg_l2a_1p25: l2 { 506 regulator-name = "vreg_l2a_1p25"; 507 regulator-min-microvolt = <1250000>; 508 regulator-max-microvolt = <1250000>; 509 }; 510 vreg_l4a_1p225: l4 { 511 regulator-name = "vreg_l4a_1p225"; 512 regulator-min-microvolt = <1225000>; 513 regulator-max-microvolt = <1225000>; 514 }; 515 vreg_l6a_1p8: l6 { 516 regulator-name = "vreg_l6a_1p8"; 517 regulator-min-microvolt = <1800000>; 518 regulator-max-microvolt = <1800000>; 519 }; 520 vreg_l8a_1p8: l8 { 521 regulator-name = "vreg_l8a_1p8"; 522 regulator-min-microvolt = <1800000>; 523 regulator-max-microvolt = <1800000>; 524 }; 525 vreg_l9a_1p8: l9 { 526 regulator-name = "vreg_l9a_1p8"; 527 regulator-min-microvolt = <1800000>; 528 regulator-max-microvolt = <1800000>; 529 }; 530 vreg_l10a_1p8: l10 { 531 regulator-name = "vreg_l10a_1p8"; 532 regulator-min-microvolt = <1800000>; 533 regulator-max-microvolt = <1800000>; 534 }; 535 vreg_l12a_1p8: l12 { 536 regulator-name = "vreg_l12a_1p8"; 537 regulator-min-microvolt = <1800000>; 538 regulator-max-microvolt = <1800000>; 539 regulator-allow-set-load; 540 }; 541 vreg_l13a_2p95: l13 { 542 regulator-name = "vreg_l13a_2p95"; 543 regulator-min-microvolt = <1800000>; 544 regulator-max-microvolt = <2950000>; 545 }; 546 vreg_l14a_1p8: l14 { 547 regulator-name = "vreg_l14a_1p8"; 548 regulator-min-microvolt = <1800000>; 549 regulator-max-microvolt = <1800000>; 550 }; 551 vreg_l15a_1p8: l15 { 552 regulator-name = "vreg_l15a_1p8"; 553 regulator-min-microvolt = <1800000>; 554 regulator-max-microvolt = <1800000>; 555 }; 556 vreg_l16a_2p7: l16 { 557 regulator-name = "vreg_l16a_2p7"; 558 regulator-min-microvolt = <2700000>; 559 regulator-max-microvolt = <2700000>; 560 }; 561 vreg_l19a_3p3: l19 { 562 regulator-name = "vreg_l19a_3p3"; 563 regulator-min-microvolt = <3000000>; 564 regulator-max-microvolt = <3000000>; 565 }; 566 vreg_l20a_2p95: l20 { 567 regulator-name = "vreg_l20a_2p95"; 568 regulator-min-microvolt = <2950000>; 569 regulator-max-microvolt = <2950000>; 570 regulator-allow-set-load; 571 }; 572 vreg_l21a_2p95: l21 { 573 regulator-name = "vreg_l21a_2p95"; 574 regulator-min-microvolt = <3300000>; 575 regulator-max-microvolt = <3300000>; 576 regulator-always-on; 577 }; 578 vreg_l23a_2p8: l23 { 579 regulator-name = "vreg_l23a_2p8"; 580 regulator-min-microvolt = <2800000>; 581 regulator-max-microvolt = <2800000>; 582 }; 583 vreg_l24a_3p075: l24 { 584 regulator-name = "vreg_l24a_3p075"; 585 regulator-min-microvolt = <3075000>; 586 regulator-max-microvolt = <3075000>; 587 }; 588 vreg_l25a_1p2: l25 { 589 regulator-name = "vreg_l25a_1p2"; 590 regulator-min-microvolt = <1200000>; 591 regulator-max-microvolt = <1200000>; 592 regulator-allow-set-load; 593 }; 594 vreg_l27a_1p2: l27 { 595 regulator-name = "vreg_l27a_1p2"; 596 regulator-min-microvolt = <1200000>; 597 regulator-max-microvolt = <1200000>; 598 }; 599 vreg_l28a_0p925: l28 { 600 regulator-name = "vreg_l28a_0p925"; 601 regulator-min-microvolt = <925000>; 602 regulator-max-microvolt = <925000>; 603 regulator-allow-set-load; 604 }; 605 vreg_l30a_1p8: l30 { 606 regulator-name = "vreg_l30a_1p8"; 607 regulator-min-microvolt = <1800000>; 608 regulator-max-microvolt = <1800000>; 609 610 /* Required by QCA6174a - vddio-xtal */ 611 regulator-always-on; 612 }; 613 vreg_l32a_1p8: l32 { 614 regulator-name = "vreg_l32a_1p8"; 615 regulator-min-microvolt = <1800000>; 616 regulator-max-microvolt = <1800000>; 617 }; 618 vreg_lvs1a_1p8: lvs1 { 619 regulator-min-microvolt = <1800000>; 620 regulator-max-microvolt = <1800000>; 621 }; 622 vreg_lvs2a_1p8: lvs2 { 623 regulator-min-microvolt = <1800000>; 624 regulator-max-microvolt = <1800000>; 625 }; 626 }; 627 628 regulators-1 { 629 compatible = "qcom,rpm-pmi8994-regulators"; 630 631 vdd_s1-supply = <&vph_pwr>; 632 vdd_s2-supply = <&vph_pwr>; 633 vdd_s3-supply = <&vph_pwr>; 634 vdd_bst_byp-supply = <&vph_pwr>; 635 636 vreg_s1b_1p025: s1 { 637 regulator-name = "vreg_s1b_1p025"; 638 regulator-min-microvolt = <1025000>; 639 regulator-max-microvolt = <1025000>; 640 }; 641 642 vph_pwr_bbyp: boost-bypass { 643 regulator-name = "vph_pwr_bbyp"; 644 regulator-min-microvolt = <3150000>; 645 regulator-max-microvolt = <3600000>; 646 }; 647 }; 648}; 649 650&pm8994_spmi_regulators { 651 qcom,saw-reg = <&saw3>; 652 s8 { 653 qcom,saw-slave; 654 }; 655 s9 { 656 qcom,saw-slave; 657 }; 658 s10 { 659 qcom,saw-slave; 660 }; 661 vreg_apc_0p8: s11 { 662 qcom,saw-leader; 663 regulator-name = "vreg_apc_0p8"; 664 regulator-min-microvolt = <470000>; 665 regulator-max-microvolt = <1140000>; 666 regulator-max-step-microvolt = <150000>; 667 regulator-always-on; 668 }; 669}; 670 671&pmi8994_spmi_regulators { 672 vdd_gfx: s2 { 673 regulator-name = "vdd_gfx"; 674 regulator-min-microvolt = <400000>; 675 regulator-max-microvolt = <1015000>; 676 regulator-enable-ramp-delay = <500>; 677 }; 678}; 679 680&pm8994_gpios { 681 irled_default: irled-default-state { 682 pins = "gpio5"; 683 function = PMIC_GPIO_FUNC_FUNC1; 684 output-low; 685 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; 686 power-source = <PM8994_GPIO_S4>; 687 bias-disable; 688 }; 689 690 wlan_en_default: wlan-en-state { 691 pins = "gpio8"; 692 function = PMIC_GPIO_FUNC_NORMAL; 693 output-low; 694 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 695 power-source = <PM8994_GPIO_S4>; 696 bias-disable; 697 }; 698 699 rome_enable_default: rome-enable-state { 700 pins = "gpio9"; 701 function = PMIC_GPIO_FUNC_NORMAL; 702 output-high; 703 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 704 power-source = <PM8994_GPIO_VPH>; 705 }; 706 707 divclk1_default: divclk1-state { 708 pins = "gpio15"; 709 function = PMIC_GPIO_FUNC_FUNC1; 710 bias-disable; 711 power-source = <PM8994_GPIO_S4>; 712 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 713 }; 714 715 divclk4_pin_a: divclk4-state { 716 pins = "gpio18"; 717 function = PMIC_GPIO_FUNC_FUNC2; 718 bias-disable; 719 power-source = <PM8994_GPIO_S4>; 720 }; 721}; 722 723&tlmm { 724 mdss_dsi_default: mdss-dsi-default-state { 725 pins = "gpio8"; 726 function = "gpio"; 727 drive-strength = <8>; 728 bias-disable; 729 }; 730 731 mdss_dsi_sleep: mdss-dsi-sleep-state { 732 pins = "gpio8"; 733 function = "gpio"; 734 drive-strength = <2>; 735 bias-pull-down; 736 }; 737 738 mdss_te_default: mdss-te-default-state { 739 pins = "gpio10"; 740 function = "mdp_vsync"; 741 drive-strength = <2>; 742 bias-pull-down; 743 }; 744 745 mdss_te_sleep: mdss-te-sleep-state { 746 pins = "gpio10"; 747 function = "mdp_vsync"; 748 drive-strength = <2>; 749 bias-pull-down; 750 }; 751 752 nfc_default: nfc-default-state { 753 pins = "gpio12", "gpio21"; 754 function = "gpio"; 755 drive-strength = <16>; 756 bias-pull-up; 757 }; 758}; 759