1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, AngeloGioacchino Del Regno 4 * <angelogioacchino.delregno@somainline.org> 5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> 6 */ 7 8#include "msm8996.dtsi" 9#include "pm8994.dtsi" 10#include "pmi8994.dtsi" 11#include "pmi8996.dtsi" 12#include <dt-bindings/input/input.h> 13#include <dt-bindings/gpio/gpio.h> 14#include <dt-bindings/leds/common.h> 15#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 16#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> 17 18/delete-node/ &adsp_mem; 19/delete-node/ &slpi_mem; 20/delete-node/ &venus_mem; 21/delete-node/ &gpu_mem; 22 23/ { 24 qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ 25 qcom,board-id = <8 0>; 26 27 chosen { 28 bootargs = "maxcpus=2"; 29 }; 30 31 reserved-memory { 32 ramoops@a7f00000 { 33 compatible = "ramoops"; 34 reg = <0 0xa7f00000 0 0x100000>; 35 record-size = <0x20000>; 36 console-size = <0x40000>; 37 ftrace-size = <0x20000>; 38 pmsg-size = <0x20000>; 39 ecc-size = <16>; 40 }; 41 42 adsp_mem: adsp@8ea00000 { 43 reg = <0x0 0x8ea00000 0x0 0x1a00000>; 44 no-map; 45 }; 46 47 gpu_mem: gpu@90400000 { 48 compatible = "shared-dma-pool"; 49 reg = <0x0 0x90400000 0x0 0x2000>; 50 no-map; 51 }; 52 53 slpi_mem: memory@90500000 { 54 reg = <0 0x90500000 0 0xa00000>; 55 no-map; 56 }; 57 58 venus_mem: memory@90f00000 { 59 reg = <0 0x90f00000 0 0x500000>; 60 no-map; 61 }; 62 }; 63 64 panel_tvdd: tvdd-regulator { 65 compatible = "regulator-fixed"; 66 regulator-name = "panel_tvdd"; 67 gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; 68 pinctrl-0 = <&tp_vddio_en>; 69 pinctrl-names = "default"; 70 }; 71 72 usb3_id: usb3-id { 73 compatible = "linux,extcon-usb-gpio"; 74 id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; 75 pinctrl-names = "default"; 76 pinctrl-0 = <&usb_detect>; 77 }; 78 79 vph_pwr: vph-pwr-regulator { 80 compatible = "regulator-fixed"; 81 regulator-min-microvolt = <3700000>; 82 regulator-max-microvolt = <3700000>; 83 regulator-name = "vph_pwr"; 84 regulator-always-on; 85 regulator-boot-on; 86 }; 87 88 wlan_en: wlan-en-1-8v { 89 compatible = "regulator-fixed"; 90 regulator-name = "wlan-en-regulator"; 91 regulator-min-microvolt = <1800000>; 92 regulator-max-microvolt = <1800000>; 93 gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; 94 pinctrl-names = "default"; 95 pinctrl-0 = <&wl_reg_on>; 96 97 /* WLAN card specific delay */ 98 startup-delay-us = <70000>; 99 enable-active-high; 100 }; 101}; 102 103&blsp1_i2c3 { 104 clock-frequency = <355000>; 105 status = "okay"; 106 107 tof_sensor: vl53l0x@29 { 108 compatible = "st,vl53l0x"; 109 reg = <0x29>; 110 }; 111}; 112 113&blsp1_uart2 { 114 status = "okay"; 115}; 116 117&blsp2_i2c5 { 118 clock-frequency = <355000>; 119 status = "okay"; 120 121 /* FUSB301 USB-C controller */ 122}; 123 124&blsp2_i2c6 { 125 clock-frequency = <355000>; 126 status = "okay"; 127 128 synaptics@2c { 129 compatible = "syna,rmi4-i2c"; 130 reg = <0x2c>; 131 interrupt-parent = <&tlmm>; 132 interrupts = <125 IRQ_TYPE_EDGE_FALLING>; 133 vdd-supply = <&panel_tvdd>; 134 135 syna,reset-delay-ms = <220>; 136 syna,startup-delay-ms = <220>; 137 #address-cells = <1>; 138 #size-cells = <0>; 139 140 rmi4-f01@1 { 141 reg = <0x1>; 142 syna,nosleep-mode = <1>; 143 }; 144 145 rmi4-f11@11 { 146 reg = <0x11>; 147 syna,sensor-type = <1>; 148 }; 149 }; 150}; 151 152&blsp2_uart2 { 153 status = "okay"; 154}; 155 156&camera0_mclk { 157 drive-strength = <2>; 158 output-low; 159}; 160 161&camera0_pwdn { 162 drive-strength = <2>; 163 output-low; 164}; 165 166&camera0_rst { 167 pins = "gpio30"; 168 drive-strength = <2>; 169 output-low; 170}; 171 172&camera2_mclk { 173 drive-strength = <2>; 174 output-low; 175}; 176 177&camera2_rst { 178 drive-strength = <2>; 179 output-low; 180}; 181 182&hsusb_phy1 { 183 vdd-supply = <&pm8994_l28>; 184 vdda-pll-supply = <&pm8994_l12>; 185 vdda-phy-dpdm-supply = <&pm8994_l24>; 186 status = "okay"; 187}; 188 189&mmcc { 190 vdd-gfx-supply = <&vdd_gfx>; 191}; 192 193&pcie0 { 194 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; 195 wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; 196 vddpe-3v3-supply = <&wlan_en>; 197 vdda-supply = <&pm8994_l28>; 198 status = "okay"; 199}; 200 201&pcie_phy { 202 vdda-phy-supply = <&pm8994_l28>; 203 vdda-pll-supply = <&pm8994_l12>; 204 status = "okay"; 205}; 206 207&pm8994_gpios { 208 pinctrl-names = "default"; 209 pinctrl-0 = <&pm8994_gpios_defaults>; 210 gpio-line-names = 211 "NC", 212 "VOL_DOWN_N", 213 "VOL_UP_N", 214 "SNAPSHOT_N", 215 "FOCUS_N", 216 "NC", 217 "NFC_VEN", 218 "NC", 219 "NC", 220 "NC", 221 "NC", 222 "NC", 223 "EAR_EN", 224 "NC", 225 "PM_DIVCLK1", 226 "PMI_CLK", 227 "NC", 228 "WL_SLEEP_CLK", 229 "NC", 230 "PMIC_SPON", 231 "UIM_BATT_ALARM", 232 "PMK_SLEEP_CLK"; 233 234 /* 235 * We don't yet know for sure which GPIOs are of our interest, but what 236 * we do know is that if a vendor sets the pins to a non-default state, there's 237 * probably a reason for it, and just to be on the safe side, we follow suit. 238 */ 239 pm8994_gpios_defaults: pm8994-gpios-default-state { 240 pm8994-gpio1-nc-pins { 241 pins = "gpio1"; 242 function = PMIC_GPIO_FUNC_NORMAL; 243 drive-push-pull; 244 bias-high-impedance; 245 }; 246 247 vol-down-n-pins { 248 pins = "gpio2"; 249 function = PMIC_GPIO_FUNC_NORMAL; 250 drive-push-pull; 251 input-enable; 252 bias-pull-up; 253 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 254 power-source = <PM8994_GPIO_S4>; 255 }; 256 257 vol-up-n-pins { 258 pins = "gpio3"; 259 function = PMIC_GPIO_FUNC_NORMAL; 260 drive-push-pull; 261 input-enable; 262 bias-pull-up; 263 power-source = <PM8994_GPIO_S4>; 264 }; 265 266 camera-snapshot-n-pins { 267 pins = "gpio4"; 268 function = PMIC_GPIO_FUNC_NORMAL; 269 drive-push-pull; 270 input-enable; 271 bias-pull-up; 272 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 273 power-source = <PM8994_GPIO_S4>; 274 }; 275 276 camera-focus-n-pins { 277 pins = "gpio5"; 278 function = PMIC_GPIO_FUNC_NORMAL; 279 drive-push-pull; 280 input-enable; 281 bias-pull-up; 282 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 283 power-source = <PM8994_GPIO_S4>; 284 }; 285 286 pm8994-gpio6-nc-pins { 287 pins = "gpio6"; 288 function = PMIC_GPIO_FUNC_NORMAL; 289 drive-push-pull; 290 bias-high-impedance; 291 power-source = <PM8994_GPIO_VPH>; 292 }; 293 294 nfc-download-pins { 295 pins = "gpio7"; 296 function = PMIC_GPIO_FUNC_NORMAL; 297 output-low; 298 drive-push-pull; 299 bias-disable; 300 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 301 power-source = <PM8994_GPIO_S4>; 302 }; 303 304 pm8994-gpio8-nc-pins { 305 pins = "gpio8"; 306 function = PMIC_GPIO_FUNC_NORMAL; 307 output-low; 308 drive-push-pull; 309 bias-high-impedance; 310 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 311 power-source = <PM8994_GPIO_VPH>; 312 }; 313 314 pm8994-gpio9-nc-pins { 315 pins = "gpio9"; 316 function = PMIC_GPIO_FUNC_NORMAL; 317 output-high; 318 drive-push-pull; 319 bias-high-impedance; 320 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 321 power-source = <PM8994_GPIO_VPH>; 322 }; 323 324 nfc-clock-pins { 325 pins = "gpio10"; 326 function = PMIC_GPIO_FUNC_NORMAL; 327 input-enable; 328 drive-push-pull; 329 bias-pull-down; 330 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 331 power-source = <PM8994_GPIO_S4>; 332 }; 333 334 pm8994-gpio11-nc-pins { 335 pins = "gpio11"; 336 function = PMIC_GPIO_FUNC_NORMAL; 337 drive-push-pull; 338 bias-high-impedance; 339 power-source = <PM8994_GPIO_VPH>; 340 }; 341 342 pm8994-gpio12-nc-pins { 343 pins = "gpio12"; 344 function = PMIC_GPIO_FUNC_NORMAL; 345 drive-push-pull; 346 bias-high-impedance; 347 power-source = <PM8994_GPIO_VPH>; 348 }; 349 350 ear-enable-pins { 351 pins = "gpio13"; 352 function = PMIC_GPIO_FUNC_NORMAL; 353 output-high; 354 drive-push-pull; 355 bias-disable; 356 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 357 power-source = <PM8994_GPIO_S4>; 358 }; 359 360 pm8994-gpio14-nc-pins { 361 pins = "gpio14"; 362 function = PMIC_GPIO_FUNC_NORMAL; 363 drive-push-pull; 364 input-enable; 365 bias-high-impedance; 366 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 367 power-source = <PM8994_GPIO_VPH>; 368 }; 369 370 pm-divclk1-gpio-pins { 371 pins = "gpio15"; 372 function = "func1"; 373 output-high; 374 drive-push-pull; 375 bias-high-impedance; 376 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 377 power-source = <PM8994_GPIO_VPH>; 378 }; 379 380 pmi-clk-gpio-pins { 381 pins = "gpio16"; 382 function = PMIC_GPIO_FUNC_NORMAL; 383 drive-push-pull; 384 }; 385 386 pm8994-gpio17-nc-pins { 387 pins = "gpio17"; 388 function = PMIC_GPIO_FUNC_NORMAL; 389 drive-push-pull; 390 bias-high-impedance; 391 power-source = <PM8994_GPIO_VPH>; 392 }; 393 394 rome-sleep-pins { 395 pins = "gpio18"; 396 function = PMIC_GPIO_FUNC_FUNC2; 397 output-low; 398 drive-push-pull; 399 bias-disable; 400 qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; 401 power-source = <PM8994_GPIO_S4>; 402 }; 403 404 pm8994-gpio19-nc-pins { 405 pins = "gpio19"; 406 function = PMIC_GPIO_FUNC_NORMAL; 407 output-low; 408 drive-push-pull; 409 bias-high-impedance; 410 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 411 power-source = <PM8994_GPIO_VPH>; 412 }; 413 414 pm8994-gpio22-nc-pins { 415 pins = "gpio22"; 416 function = PMIC_GPIO_FUNC_NORMAL; 417 drive-push-pull; 418 bias-high-impedance; 419 power-source = <PM8994_GPIO_VPH>; 420 }; 421 }; 422}; 423 424&pm8994_mpps { 425 pinctrl-names = "default"; 426 pinctrl-0 = <&pm8994_mpps_defaults>; 427 428 gpio-line-names = 429 "SDC_UIM_VBIAS", 430 "LCD_ID_ADC", 431 "VREF_DACX", 432 "NC", 433 "FLASH_THERM", 434 "NC", 435 "NC", 436 "RF_ID"; 437 438 pm8994_mpps_defaults: pm8994-mpps-default-state { 439 lcd-id_adc-mpp-pins { 440 pins = "mpp2"; 441 function = "analog"; 442 input-enable; 443 qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; 444 }; 445 446 pm-mpp4-nc-pins { 447 pins = "mpp4"; 448 function = "digital"; 449 bias-high-impedance; 450 power-source = <PM8994_GPIO_VPH>; 451 }; 452 453 flash-therm-mpp-pins { 454 pins = "mpp5"; 455 function = "analog"; 456 input-enable; 457 qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; 458 }; 459 460 mpp6-nc-pins { 461 pins = "mpp6"; 462 function = "digital"; 463 bias-high-impedance; 464 }; 465 466 rf-id-mpp-pins { 467 pins = "mpp8"; 468 function = "analog"; 469 input-enable; 470 qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>; 471 }; 472 }; 473}; 474 475&pm8994_resin { 476 linux,code = <KEY_VOLUMEUP>; 477 status = "okay"; 478}; 479 480&pmi8994_gpios { 481 pinctrl-names = "default"; 482 pinctrl-0 = <&pmi8994_gpios_defaults>; 483 484 gpio-line-names = 485 "VIB_LDO_EN", 486 "NC", 487 "NC", 488 "NC", 489 "NC", 490 "NC", 491 "NC", 492 "NC", 493 "USB_SWITCH_SEL", 494 "NC"; 495 496 pmi8994_gpios_defaults: pmi8994-gpios-default-state { 497 vib-ldo-en-gpio-pins { 498 pins = "gpio1"; 499 function = PMIC_GPIO_FUNC_NORMAL; 500 drive-push-pull; 501 output-low; 502 bias-disable; 503 power-source = <PM8994_GPIO_S4>; 504 }; 505 506 pmi-gpio2-nc-pins { 507 pins = "gpio2"; 508 function = PMIC_GPIO_FUNC_NORMAL; 509 drive-push-pull; 510 input-enable; 511 bias-high-impedance; 512 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 513 power-source = <PM8994_GPIO_VPH>; 514 }; 515 516 pmi-gpio3-nc-pins { 517 pins = "gpio3"; 518 function = PMIC_GPIO_FUNC_NORMAL; 519 drive-push-pull; 520 input-enable; 521 bias-high-impedance; 522 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 523 power-source = <PM8994_GPIO_VPH>; 524 }; 525 526 pmi-gpio4-nc-pins { 527 pins = "gpio4"; 528 function = PMIC_GPIO_FUNC_NORMAL; 529 drive-push-pull; 530 output-high; 531 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 532 power-source = <PM8994_GPIO_S4>; 533 }; 534 535 pmi-gpio5-nc-pins { 536 pins = "gpio5"; 537 function = PMIC_GPIO_FUNC_NORMAL; 538 drive-push-pull; 539 output-high; 540 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 541 power-source = <PM8994_GPIO_S4>; 542 }; 543 544 pmi-gpio6-nc-pins { 545 pins = "gpio6"; 546 function = PMIC_GPIO_FUNC_NORMAL; 547 drive-push-pull; 548 output-high; 549 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 550 power-source = <PM8994_GPIO_S4>; 551 }; 552 553 pmi-gpio7-nc-pins { 554 pins = "gpio7"; 555 function = PMIC_GPIO_FUNC_NORMAL; 556 drive-push-pull; 557 output-high; 558 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 559 power-source = <PM8994_GPIO_S4>; 560 }; 561 562 pmi-gpio8-nc-pins { 563 pins = "gpio8"; 564 function = PMIC_GPIO_FUNC_NORMAL; 565 drive-push-pull; 566 output-high; 567 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 568 power-source = <PM8994_GPIO_S4>; 569 }; 570 571 usb-switch-sel-pins { 572 pins = "gpio9"; 573 function = PMIC_GPIO_FUNC_NORMAL; 574 drive-push-pull; 575 }; 576 577 pmi-gpio10-nc-pins { 578 pins = "gpio10"; 579 function = PMIC_GPIO_FUNC_NORMAL; 580 output-low; 581 drive-push-pull; 582 bias-disable; 583 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 584 power-source = <PM8994_GPIO_S4>; 585 }; 586 }; 587}; 588 589&pm8994_spmi_regulators { 590 qcom,saw-reg = <&saw3>; 591 592 pm8994_s9: s9 { 593 qcom,saw-slave; 594 }; 595 596 pm8994_s10: s10 { 597 qcom,saw-slave; 598 }; 599 600 pm8994_s11: s11 { 601 qcom,saw-leader; 602 regulator-name = "vdd_apcc"; 603 regulator-always-on; 604 regulator-min-microvolt = <470000>; 605 regulator-max-microvolt = <1140000>; 606 }; 607}; 608 609&pmi8994_lpg { 610 qcom,power-source = <1>; 611 status = "okay"; 612 613 multi-led { 614 color = <LED_COLOR_ID_RGB>; 615 function = LED_FUNCTION_STATUS; 616 617 #address-cells = <1>; 618 #size-cells = <0>; 619 620 led@1 { 621 reg = <1>; 622 color = <LED_COLOR_ID_BLUE>; 623 }; 624 625 led@2 { 626 reg = <2>; 627 color = <LED_COLOR_ID_GREEN>; 628 }; 629 630 led@3 { 631 reg = <3>; 632 color = <LED_COLOR_ID_RED>; 633 }; 634 }; 635}; 636 637&pmi8994_spmi_regulators { 638 vdd_gfx: 639 pmi8994_s2: s2 { 640 /* Pinned to a high value for now to avoid random crashes. */ 641 regulator-min-microvolt = <1015000>; 642 regulator-max-microvolt = <1015000>; 643 regulator-name = "vdd_gfx"; 644 regulator-always-on; 645 }; 646}; 647 648&pmi8994_wled { 649 default-brightness = <512>; 650 qcom,num-strings = <3>; 651 status = "okay"; 652}; 653 654&rpm_requests { 655 regulators-0 { 656 compatible = "qcom,rpm-pm8994-regulators"; 657 658 vdd_s1-supply = <&vph_pwr>; 659 vdd_s2-supply = <&vph_pwr>; 660 vdd_s3-supply = <&vph_pwr>; 661 vdd_s4-supply = <&vph_pwr>; 662 vdd_s5-supply = <&vph_pwr>; 663 vdd_s6-supply = <&vph_pwr>; 664 vdd_s7-supply = <&vph_pwr>; 665 vdd_s8-supply = <&vph_pwr>; 666 vdd_s9-supply = <&vph_pwr>; 667 vdd_s10-supply = <&vph_pwr>; 668 vdd_s11-supply = <&vph_pwr>; 669 vdd_s12-supply = <&vph_pwr>; 670 vdd_l1-supply = <&pm8994_s3>; 671 vdd_l2_l26_l28-supply = <&pm8994_s3>; 672 vdd_l3_l11-supply = <&pm8994_s3>; 673 vdd_l4_l27_l31-supply = <&pm8994_s3>; 674 vdd_l5_l7-supply = <&pm8994_s5>; 675 vdd_l6_l12_l32-supply = <&pm8994_s5>; 676 vdd_l8_l16_l30-supply = <&vph_pwr>; 677 vdd_l14_l15-supply = <&pm8994_s5>; 678 vdd_l20_l21-supply = <&pm8994_s5>; 679 vdd_l25-supply = <&pm8994_s3>; 680 vdd_lvs1_2-supply = <&pm8994_s4>; 681 682 pm8994_s3: s3 { 683 regulator-min-microvolt = <1300000>; 684 regulator-max-microvolt = <1300000>; 685 }; 686 687 pm8994_s4: s4 { 688 regulator-min-microvolt = <1800000>; 689 regulator-max-microvolt = <1800000>; 690 regulator-system-load = <325000>; 691 regulator-always-on; 692 }; 693 694 pm8994_s5: s5 { 695 regulator-min-microvolt = <2150000>; 696 regulator-max-microvolt = <2150000>; 697 }; 698 699 pm8994_s7: s7 { 700 regulator-min-microvolt = <800000>; 701 regulator-max-microvolt = <800000>; 702 }; 703 704 pm8994_l1: l1 { 705 regulator-min-microvolt = <1000000>; 706 regulator-max-microvolt = <1000000>; 707 }; 708 709 pm8994_l2: l2 { 710 regulator-min-microvolt = <1250000>; 711 regulator-max-microvolt = <1250000>; 712 }; 713 714 pm8994_l3: l3 { 715 regulator-min-microvolt = <1100000>; 716 regulator-max-microvolt = <1100000>; 717 }; 718 719 pm8994_l4: l4 { 720 regulator-min-microvolt = <1225000>; 721 regulator-max-microvolt = <1225000>; 722 }; 723 724 /* L6 and L7 seem unused. */ 725 726 pm8994_l8: l8 { 727 regulator-min-microvolt = <1800000>; 728 regulator-max-microvolt = <1800000>; 729 }; 730 731 pm8994_l9: l9 { 732 regulator-min-microvolt = <1800000>; 733 regulator-max-microvolt = <1800000>; 734 }; 735 736 pm8994_l10: l10 { 737 regulator-min-microvolt = <1800000>; 738 regulator-max-microvolt = <1800000>; 739 }; 740 741 pm8994_l11: l11 { 742 regulator-min-microvolt = <1100000>; 743 regulator-max-microvolt = <1100000>; 744 }; 745 746 pm8994_l12: l12 { 747 regulator-min-microvolt = <1800000>; 748 regulator-max-microvolt = <1800000>; 749 regulator-allow-set-load; 750 }; 751 752 pm8994_l13: l13 { 753 regulator-min-microvolt = <1800000>; 754 regulator-max-microvolt = <2950000>; 755 regulator-system-load = <22000>; 756 regulator-allow-set-load; 757 }; 758 759 pm8994_l14: l14 { 760 regulator-min-microvolt = <1700000>; 761 regulator-max-microvolt = <1900000>; 762 }; 763 764 pm8994_l15: l15 { 765 regulator-min-microvolt = <1800000>; 766 regulator-max-microvolt = <1800000>; 767 }; 768 769 pm8994_l16: l16 { 770 regulator-min-microvolt = <2700000>; 771 regulator-max-microvolt = <2700000>; 772 }; 773 774 pm8994_l17: l17 { 775 regulator-min-microvolt = <2200000>; 776 regulator-max-microvolt = <2500000>; 777 }; 778 779 pm8994_l18: l18 { 780 regulator-min-microvolt = <1800000>; 781 regulator-max-microvolt = <1800000>; 782 }; 783 784 pm8994_l19: l19 { 785 regulator-min-microvolt = <3000000>; 786 regulator-max-microvolt = <3000000>; 787 }; 788 789 pm8994_l20: l20 { 790 regulator-min-microvolt = <2950000>; 791 regulator-max-microvolt = <2950000>; 792 regulator-system-load = <570000>; 793 regulator-allow-set-load; 794 }; 795 796 pm8994_l21: l21 { 797 regulator-min-microvolt = <2950000>; 798 regulator-max-microvolt = <2950000>; 799 regulator-system-load = <800000>; 800 regulator-allow-set-load; 801 }; 802 803 pm8994_l22: l22 { 804 regulator-min-microvolt = <3000000>; 805 regulator-max-microvolt = <3000000>; 806 }; 807 808 pm8994_l23: l23 { 809 regulator-min-microvolt = <2700000>; 810 regulator-max-microvolt = <2700000>; 811 }; 812 813 pm8994_l24: l24 { 814 regulator-min-microvolt = <3075000>; 815 regulator-max-microvolt = <3075000>; 816 regulator-allow-set-load; 817 }; 818 819 pm8994_l25: l25 { 820 regulator-min-microvolt = <1200000>; 821 regulator-max-microvolt = <1200000>; 822 regulator-allow-set-load; 823 }; 824 825 pm8994_l27: l27 { 826 regulator-min-microvolt = <1000000>; 827 regulator-max-microvolt = <1200000>; 828 }; 829 830 pm8994_l28: l28 { 831 regulator-min-microvolt = <925000>; 832 regulator-max-microvolt = <925000>; 833 regulator-allow-set-load; 834 }; 835 836 pm8994_l29: l29 { 837 regulator-min-microvolt = <2700000>; 838 regulator-max-microvolt = <2700000>; 839 }; 840 841 pm8994_l30: l30 { }; 842 843 pm8994_l32: l32 { 844 regulator-min-microvolt = <1800000>; 845 regulator-max-microvolt = <1800000>; 846 }; 847 }; 848}; 849 850&sdhc1 { 851 vmmc-supply = <&pm8994_l20>; 852 vqmmc-supply = <&pm8994_s4>; 853 mmc-hs400-1_8v; 854 mmc-hs200-1_8v; 855 status = "okay"; 856}; 857 858&sdhc2 { 859 cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; 860 vmmc-supply = <&pm8994_l21>; 861 vqmmc-supply = <&pm8994_l13>; 862 status = "okay"; 863}; 864 865&tlmm { 866 gpio-reserved-ranges = <0 4>; 867 pinctrl-0 = <&sw_service_gpio>; 868 pinctrl-names = "default"; 869 870 disp_reset_n_gpio: disp-reset-n-state { 871 pins = "gpio8"; 872 function = "gpio"; 873 drive-strength = <2>; 874 bias-disable; 875 }; 876 877 mdp_vsync_p_gpio: mdp-vsync-p-state { 878 pins = "gpio10"; 879 function = "mdp_vsync"; 880 drive-strength = <2>; 881 bias-disable; 882 }; 883 884 sw_service_gpio: sw-service-gpio-state { 885 pins = "gpio16"; 886 function = "gpio"; 887 drive-strength = <2>; 888 bias-pull-up; 889 }; 890 891 usb_detect: usb-detect-state { 892 pins = "gpio25"; 893 function = "gpio"; 894 drive-strength = <2>; 895 bias-disable; 896 output-high; 897 }; 898 899 uim_detect_en: uim-detect-en-state { 900 pins = "gpio29"; 901 function = "gpio"; 902 drive-strength = <2>; 903 bias-disable; 904 output-high; 905 }; 906 907 tray_det_pin: tray-det-state { 908 pins = "gpio40"; 909 function = "gpio"; 910 drive-strength = <2>; 911 bias-disable; 912 }; 913 914 tp_vddio_en: tp-vddio-en-state { 915 pins = "gpio50"; 916 function = "gpio"; 917 drive-strength = <2>; 918 bias-disable; 919 output-high; 920 }; 921 922 lcd_vddio_en: lcd-vddio-en-state { 923 pins = "gpio51"; 924 function = "gpio"; 925 drive-strength = <2>; 926 bias-disable; 927 output-low; 928 }; 929 930 wl_host_wake: wl-host-wake-state { 931 pins = "gpio79"; 932 function = "gpio"; 933 drive-strength = <2>; 934 bias-pull-down; 935 }; 936 937 wl_reg_on: wl-reg-on-state { 938 pins = "gpio84"; 939 function = "gpio"; 940 drive-strength = <2>; 941 bias-disable; 942 output-low; 943 }; 944 945 ts_reset_n: ts-rst-n-state { 946 pins = "gpio89"; 947 function = "gpio"; 948 drive-strength = <2>; 949 }; 950 951 touch_int_n: touch-int-n-state { 952 pins = "gpio125"; 953 function = "gpio"; 954 drive-strength = <2>; 955 bias-pull-up; 956 }; 957 958 touch_int_sleep: touch-int-sleep-state { 959 pins = "gpio125"; 960 function = "gpio"; 961 drive-strength = <2>; 962 bias-pull-down; 963 }; 964}; 965 966&usb3 { 967 qcom,select-utmi-as-pipe-clk; 968 status = "okay"; 969}; 970 971&usb3_dwc3 { 972 extcon = <&usb3_id>; 973 dr_mode = "peripheral"; 974 maximum-speed = "high-speed"; 975 phys = <&hsusb_phy1>; 976 phy-names = "usb2-phy"; 977 snps,hird-threshold = /bits/ 8 <0>; 978}; 979