1// SPDX-License-Identifier: GPL-2.0-only 2// Copyright (C) 2020 Stephan Gerhold 3 4/dts-v1/; 5 6#include "msm8916-pm8916.dtsi" 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/leds/common.h> 10 11/ { 12 model = "Xiaomi Redmi 2 (Wingtech WT88047)"; 13 compatible = "wingtech,wt88047", "qcom,msm8916"; 14 chassis-type = "handset"; 15 16 aliases { 17 serial0 = &blsp1_uart2; 18 }; 19 20 chosen { 21 stdout-path = "serial0"; 22 }; 23 24 gpio-keys { 25 compatible = "gpio-keys"; 26 27 pinctrl-names = "default"; 28 pinctrl-0 = <&gpio_keys_default>; 29 30 label = "GPIO Buttons"; 31 32 volume-up { 33 label = "Volume Up"; 34 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 35 linux,code = <KEY_VOLUMEUP>; 36 }; 37 }; 38 39 usb_id: usb-id { 40 compatible = "linux,extcon-usb-gpio"; 41 id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; 42 pinctrl-names = "default"; 43 pinctrl-0 = <&usb_id_default>; 44 }; 45}; 46 47&blsp_i2c2 { 48 status = "okay"; 49 50 imu@68 { 51 compatible = "invensense,mpu6880"; 52 reg = <0x68>; 53 54 interrupt-parent = <&msmgpio>; 55 interrupts = <115 IRQ_TYPE_EDGE_RISING>; 56 57 vdd-supply = <&pm8916_l17>; 58 vddio-supply = <&pm8916_l6>; 59 60 pinctrl-names = "default"; 61 pinctrl-0 = <&imu_default>; 62 63 mount-matrix = "1", "0", "0", 64 "0", "-1", "0", 65 "0", "0", "1"; 66 }; 67}; 68 69&blsp_i2c5 { 70 status = "okay"; 71 72 touchscreen@38 { 73 /* Likely some other model but works just fine with this one */ 74 compatible = "edt,edt-ft5506"; 75 reg = <0x38>; 76 77 interrupt-parent = <&msmgpio>; 78 interrupts = <13 IRQ_TYPE_EDGE_FALLING>; 79 80 reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; 81 82 vcc-supply = <&pm8916_l17>; 83 iovcc-supply = <&pm8916_l6>; 84 85 touchscreen-size-x = <720>; 86 touchscreen-size-y = <1280>; 87 88 pinctrl-names = "default"; 89 pinctrl-0 = <&touchscreen_default>; 90 }; 91}; 92 93&blsp_i2c6 { 94 status = "okay"; 95 96 led-controller@45 { 97 compatible = "awinic,aw2013"; 98 reg = <0x45>; 99 #address-cells = <1>; 100 #size-cells = <0>; 101 102 vcc-supply = <&pm8916_l16>; 103 104 led@0 { 105 reg = <0>; 106 led-max-microamp = <15000>; 107 function = LED_FUNCTION_INDICATOR; 108 color = <LED_COLOR_ID_RED>; 109 }; 110 111 led@1 { 112 reg = <1>; 113 led-max-microamp = <15000>; 114 function = LED_FUNCTION_INDICATOR; 115 color = <LED_COLOR_ID_GREEN>; 116 }; 117 118 led@2 { 119 reg = <2>; 120 led-max-microamp = <15000>; 121 function = LED_FUNCTION_INDICATOR; 122 color = <LED_COLOR_ID_BLUE>; 123 }; 124 }; 125}; 126 127&blsp1_uart2 { 128 status = "okay"; 129}; 130 131&pm8916_resin { 132 status = "okay"; 133 linux,code = <KEY_VOLUMEDOWN>; 134}; 135 136&pm8916_vib { 137 status = "okay"; 138}; 139 140&pronto { 141 status = "okay"; 142}; 143 144&sdhc_1 { 145 status = "okay"; 146 147 pinctrl-names = "default", "sleep"; 148 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 149 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 150}; 151 152&sdhc_2 { 153 status = "okay"; 154 155 pinctrl-names = "default", "sleep"; 156 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; 157 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; 158 159 non-removable; 160}; 161 162&usb { 163 status = "okay"; 164 extcon = <&usb_id>, <&usb_id>; 165}; 166 167&usb_hs_phy { 168 extcon = <&usb_id>; 169}; 170 171&smd_rpm_regulators { 172 vdd_l1_l2_l3-supply = <&pm8916_s3>; 173 vdd_l4_l5_l6-supply = <&pm8916_s4>; 174 vdd_l7-supply = <&pm8916_s4>; 175 176 s3 { 177 regulator-min-microvolt = <1200000>; 178 regulator-max-microvolt = <1300000>; 179 }; 180 181 s4 { 182 regulator-min-microvolt = <1800000>; 183 regulator-max-microvolt = <2100000>; 184 }; 185 186 l1 { 187 regulator-min-microvolt = <1225000>; 188 regulator-max-microvolt = <1225000>; 189 }; 190 191 l2 { 192 regulator-min-microvolt = <1200000>; 193 regulator-max-microvolt = <1200000>; 194 }; 195 196 l4 { 197 regulator-min-microvolt = <2050000>; 198 regulator-max-microvolt = <2050000>; 199 }; 200 201 l5 { 202 regulator-min-microvolt = <1800000>; 203 regulator-max-microvolt = <1800000>; 204 }; 205 206 l6 { 207 regulator-min-microvolt = <1800000>; 208 regulator-max-microvolt = <1800000>; 209 }; 210 211 l7 { 212 regulator-min-microvolt = <1800000>; 213 regulator-max-microvolt = <1800000>; 214 }; 215 216 l8 { 217 regulator-min-microvolt = <2850000>; 218 regulator-max-microvolt = <2900000>; 219 }; 220 221 l9 { 222 regulator-min-microvolt = <3300000>; 223 regulator-max-microvolt = <3300000>; 224 }; 225 226 l10 { 227 regulator-min-microvolt = <2700000>; 228 regulator-max-microvolt = <2800000>; 229 }; 230 231 l11 { 232 regulator-min-microvolt = <2950000>; 233 regulator-max-microvolt = <2950000>; 234 regulator-allow-set-load; 235 regulator-system-load = <200000>; 236 }; 237 238 l12 { 239 regulator-min-microvolt = <1800000>; 240 regulator-max-microvolt = <2950000>; 241 }; 242 243 l13 { 244 regulator-min-microvolt = <3075000>; 245 regulator-max-microvolt = <3075000>; 246 }; 247 248 l14 { 249 regulator-min-microvolt = <1800000>; 250 regulator-max-microvolt = <3300000>; 251 }; 252 253 l15 { 254 regulator-min-microvolt = <1800000>; 255 regulator-max-microvolt = <3300000>; 256 }; 257 258 l16 { 259 regulator-min-microvolt = <2800000>; 260 regulator-max-microvolt = <3300000>; 261 }; 262 263 l17 { 264 regulator-min-microvolt = <2850000>; 265 regulator-max-microvolt = <2850000>; 266 }; 267 268 l18 { 269 regulator-min-microvolt = <2700000>; 270 regulator-max-microvolt = <2700000>; 271 }; 272}; 273 274&msmgpio { 275 gpio_keys_default: gpio-keys-default { 276 pins = "gpio107"; 277 function = "gpio"; 278 279 drive-strength = <2>; 280 bias-pull-up; 281 }; 282 283 imu_default: imu-default { 284 pins = "gpio115"; 285 function = "gpio"; 286 287 drive-strength = <2>; 288 bias-disable; 289 }; 290 291 touchscreen_default: touchscreen-default { 292 pins = "gpio13"; 293 function = "gpio"; 294 295 drive-strength = <2>; 296 bias-pull-up; 297 298 reset { 299 pins = "gpio12"; 300 function = "gpio"; 301 302 drive-strength = <2>; 303 bias-disable; 304 }; 305 }; 306 307 usb_id_default: usb-id-default { 308 pins = "gpio110"; 309 function = "gpio"; 310 311 drive-strength = <8>; 312 bias-pull-up; 313 }; 314}; 315