1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include <dt-bindings/gpio/gpio.h> 7 8/ { 9 model = "Samsung Galaxy J5 (2015)"; 10 compatible = "samsung,j5", "qcom,msm8916"; 11 chassis-type = "handset"; 12 13 aliases { 14 serial0 = &blsp1_uart2; 15 }; 16 17 chosen { 18 stdout-path = "serial0"; 19 }; 20 21 reserved-memory { 22 /* Additional memory used by Samsung firmware modifications */ 23 tz-apps@85500000 { 24 reg = <0x0 0x85500000 0x0 0xb00000>; 25 no-map; 26 }; 27 }; 28 29 gpio-keys { 30 compatible = "gpio-keys"; 31 32 pinctrl-names = "default"; 33 pinctrl-0 = <&gpio_keys_default>; 34 35 label = "GPIO Buttons"; 36 37 volume-up { 38 label = "Volume Up"; 39 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 40 linux,code = <KEY_VOLUMEUP>; 41 }; 42 43 home-key { 44 label = "Home Key"; 45 gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; 46 linux,code = <KEY_HOMEPAGE>; 47 }; 48 }; 49}; 50 51&blsp1_uart2 { 52 status = "okay"; 53}; 54 55&pm8916_resin { 56 status = "okay"; 57 linux,code = <KEY_VOLUMEDOWN>; 58}; 59 60/* FIXME: Replace with SM5703 MUIC when driver is available */ 61&pm8916_usbin { 62 status = "okay"; 63}; 64 65&pronto { 66 status = "okay"; 67}; 68 69&sdhc_1 { 70 status = "okay"; 71 72 pinctrl-names = "default", "sleep"; 73 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 74 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 75}; 76 77&sdhc_2 { 78 status = "okay"; 79 80 pinctrl-names = "default", "sleep"; 81 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 82 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 83 84 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; 85}; 86 87&usb { 88 status = "okay"; 89 dr_mode = "peripheral"; 90 extcon = <&pm8916_usbin>; 91}; 92 93&usb_hs_phy { 94 extcon = <&pm8916_usbin>; 95 qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; 96}; 97 98&smd_rpm_regulators { 99 vdd_l1_l2_l3-supply = <&pm8916_s3>; 100 vdd_l4_l5_l6-supply = <&pm8916_s4>; 101 vdd_l7-supply = <&pm8916_s4>; 102 103 s3 { 104 regulator-min-microvolt = <1200000>; 105 regulator-max-microvolt = <1300000>; 106 }; 107 108 s4 { 109 regulator-min-microvolt = <1800000>; 110 regulator-max-microvolt = <2100000>; 111 }; 112 113 l1 { 114 regulator-min-microvolt = <1225000>; 115 regulator-max-microvolt = <1225000>; 116 }; 117 118 l2 { 119 regulator-min-microvolt = <1200000>; 120 regulator-max-microvolt = <1200000>; 121 }; 122 123 l4 { 124 regulator-min-microvolt = <2050000>; 125 regulator-max-microvolt = <2050000>; 126 }; 127 128 l5 { 129 regulator-min-microvolt = <1800000>; 130 regulator-max-microvolt = <1800000>; 131 }; 132 133 l6 { 134 regulator-min-microvolt = <1800000>; 135 regulator-max-microvolt = <1800000>; 136 }; 137 138 l7 { 139 regulator-min-microvolt = <1800000>; 140 regulator-max-microvolt = <1800000>; 141 }; 142 143 l8 { 144 regulator-min-microvolt = <2850000>; 145 regulator-max-microvolt = <2900000>; 146 }; 147 148 l9 { 149 regulator-min-microvolt = <3300000>; 150 regulator-max-microvolt = <3300000>; 151 }; 152 153 l10 { 154 regulator-min-microvolt = <2700000>; 155 regulator-max-microvolt = <2800000>; 156 }; 157 158 l11 { 159 regulator-min-microvolt = <1800000>; 160 regulator-max-microvolt = <2950000>; 161 regulator-allow-set-load; 162 regulator-system-load = <200000>; 163 }; 164 165 l12 { 166 regulator-min-microvolt = <1800000>; 167 regulator-max-microvolt = <2950000>; 168 }; 169 170 l13 { 171 regulator-min-microvolt = <3075000>; 172 regulator-max-microvolt = <3075000>; 173 }; 174 175 l14 { 176 regulator-min-microvolt = <1800000>; 177 regulator-max-microvolt = <3300000>; 178 }; 179 180 l15 { 181 regulator-min-microvolt = <1800000>; 182 regulator-max-microvolt = <3300000>; 183 }; 184 185 l16 { 186 regulator-min-microvolt = <1800000>; 187 regulator-max-microvolt = <3300000>; 188 }; 189 190 l17 { 191 regulator-min-microvolt = <3000000>; 192 regulator-max-microvolt = <3000000>; 193 }; 194 195 l18 { 196 regulator-min-microvolt = <2700000>; 197 regulator-max-microvolt = <2700000>; 198 }; 199}; 200 201&msmgpio { 202 gpio_keys_default: gpio-keys-default { 203 pins = "gpio107", "gpio109"; 204 function = "gpio"; 205 206 drive-strength = <2>; 207 bias-pull-up; 208 }; 209}; 210