xref: /freebsd/sys/contrib/device-tree/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts (revision dd21556857e8d40f66bf5ad54754d9d52669ebf7)
1// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-samsung-fortuna-common.dtsi"
6
7/ {
8	model = "Samsung Galaxy Grand Prime (SM-G530W)";
9	compatible = "samsung,gprimeltecan", "qcom,msm8916";
10	chassis-type = "handset";
11
12	reserved-memory {
13		/* Firmware for gprimeltecan needs more space */
14		/delete-node/ tz-apps@85a00000;
15
16		/* Additional memory used by Samsung firmware modifications */
17		tz-apps@85500000 {
18			reg = <0x0 0x85500000 0x0 0xb00000>;
19			no-map;
20		};
21	};
22};
23
24&battery {
25	charge-term-current-microamp = <200000>;
26	constant-charge-current-max-microamp = <1000000>;
27	constant-charge-voltage-max-microvolt = <4350000>;
28};
29
30&bosch_accel {
31	status = "okay";
32};
33
34&bosch_magn {
35	status = "okay";
36};
37
38&blsp_i2c6 {
39	/* pmic@34 is on i2c_nfc instead */
40	/delete-node/ pmic@34;
41
42	nfc@27 {
43		compatible = "samsung,s3fwrn5-i2c";
44		reg = <0x27>;
45
46		interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
47
48		en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
49		wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
50
51		clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
52
53		pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
54		pinctrl-names = "default";
55	};
56};
57
58&i2c_nfc {
59	/* nfc@27 is on &blsp_i2c6 */
60
61	pmic@34 {
62		compatible = "richtek,rt5033";
63		reg = <0x34>;
64
65		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
66
67		pinctrl-0 = <&pmic_int_default>;
68		pinctrl-names = "default";
69
70		regulators {
71			rt5033_reg_safe_ldo: SAFE_LDO {
72				regulator-min-microvolt = <4900000>;
73				regulator-max-microvolt = <4900000>;
74				regulator-always-on;
75			};
76
77			/*
78			 * Needed for camera, but not used yet.
79			 * Define empty nodes to allow disabling the unused
80			 * regulators.
81			 */
82			LDO {};
83			BUCK {};
84		};
85
86		charger: charger {
87			compatible = "richtek,rt5033-charger";
88			monitored-battery = <&battery>;
89			richtek,usb-connector = <&usb_con>;
90		};
91	};
92};
93
94&mpss_mem {
95	/* Firmware for gprimeltecan needs more space */
96	reg = <0x0 0x86800000 0x0 0x5400000>;
97};
98