1// SPDX-License-Identifier: GPL-2.0-only 2 3#include "msm8916-pm8916.dtsi" 4#include <dt-bindings/gpio/gpio.h> 5#include <dt-bindings/input/input.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7 8/ { 9 aliases { 10 serial0 = &blsp1_uart2; 11 }; 12 13 chosen { 14 stdout-path = "serial0"; 15 }; 16 17 reserved-memory { 18 /* Additional memory used by Samsung firmware modifications */ 19 tz-apps@85500000 { 20 reg = <0x0 0x85500000 0x0 0xb00000>; 21 no-map; 22 }; 23 }; 24 25 gpio-keys { 26 compatible = "gpio-keys"; 27 28 pinctrl-names = "default"; 29 pinctrl-0 = <&gpio_keys_default>; 30 31 label = "GPIO Buttons"; 32 33 volume-up { 34 label = "Volume Up"; 35 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 36 linux,code = <KEY_VOLUMEUP>; 37 }; 38 39 home { 40 label = "Home"; 41 gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; 42 linux,code = <KEY_HOMEPAGE>; 43 }; 44 }; 45 46 gpio-hall-sensor { 47 compatible = "gpio-keys"; 48 49 pinctrl-names = "default"; 50 pinctrl-0 = <&gpio_hall_sensor_default>; 51 52 label = "GPIO Hall Effect Sensor"; 53 54 hall-sensor { 55 label = "Hall Effect Sensor"; 56 gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; 57 linux,input-type = <EV_SW>; 58 linux,code = <SW_LID>; 59 linux,can-disable; 60 }; 61 }; 62 63 reg_vdd_tsp: regulator-vdd-tsp { 64 compatible = "regulator-fixed"; 65 regulator-name = "vdd_tsp"; 66 regulator-min-microvolt = <3300000>; 67 regulator-max-microvolt = <3300000>; 68 69 gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; 70 enable-active-high; 71 72 pinctrl-names = "default"; 73 pinctrl-0 = <&tsp_en_default>; 74 }; 75 76 i2c-muic { 77 compatible = "i2c-gpio"; 78 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; 79 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; 80 81 pinctrl-names = "default"; 82 pinctrl-0 = <&muic_i2c_default>; 83 84 #address-cells = <1>; 85 #size-cells = <0>; 86 87 muic: extcon@25 { 88 compatible = "siliconmitus,sm5502-muic"; 89 90 reg = <0x25>; 91 interrupt-parent = <&msmgpio>; 92 interrupts = <12 IRQ_TYPE_EDGE_FALLING>; 93 94 pinctrl-names = "default"; 95 pinctrl-0 = <&muic_int_default>; 96 }; 97 }; 98}; 99 100&blsp_i2c2 { 101 status = "okay"; 102 103 accelerometer: accelerometer@10 { 104 compatible = "bosch,bmc150_accel"; 105 reg = <0x10>; 106 interrupt-parent = <&msmgpio>; 107 interrupts = <115 IRQ_TYPE_EDGE_RISING>; 108 109 vdd-supply = <&pm8916_l17>; 110 vddio-supply = <&pm8916_l5>; 111 112 pinctrl-names = "default"; 113 pinctrl-0 = <&accel_int_default>; 114 }; 115 116 magnetometer@12 { 117 compatible = "bosch,bmc150_magn"; 118 reg = <0x12>; 119 120 vdd-supply = <&pm8916_l17>; 121 vddio-supply = <&pm8916_l5>; 122 }; 123}; 124 125&blsp1_uart2 { 126 status = "okay"; 127}; 128 129&dsi0 { 130 pinctrl-names = "default", "sleep"; 131 pinctrl-0 = <&mdss_default>; 132 pinctrl-1 = <&mdss_sleep>; 133}; 134 135&mdss { 136 status = "okay"; 137}; 138 139&pm8916_resin { 140 status = "okay"; 141 linux,code = <KEY_VOLUMEDOWN>; 142}; 143 144&pronto { 145 status = "okay"; 146}; 147 148&sdhc_1 { 149 status = "okay"; 150 151 pinctrl-names = "default", "sleep"; 152 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 153 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 154}; 155 156&sdhc_2 { 157 status = "okay"; 158 159 pinctrl-names = "default", "sleep"; 160 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 161 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 162 163 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; 164}; 165 166&usb { 167 status = "okay"; 168 extcon = <&muic>, <&muic>; 169}; 170 171&usb_hs_phy { 172 extcon = <&muic>; 173}; 174 175&smd_rpm_regulators { 176 vdd_l1_l2_l3-supply = <&pm8916_s3>; 177 vdd_l4_l5_l6-supply = <&pm8916_s4>; 178 vdd_l7-supply = <&pm8916_s4>; 179 180 s3 { 181 regulator-min-microvolt = <1200000>; 182 regulator-max-microvolt = <1300000>; 183 }; 184 185 s4 { 186 regulator-min-microvolt = <1800000>; 187 regulator-max-microvolt = <2100000>; 188 }; 189 190 l1 { 191 regulator-min-microvolt = <1225000>; 192 regulator-max-microvolt = <1225000>; 193 }; 194 195 l2 { 196 regulator-min-microvolt = <1200000>; 197 regulator-max-microvolt = <1200000>; 198 }; 199 200 l4 { 201 regulator-min-microvolt = <2050000>; 202 regulator-max-microvolt = <2050000>; 203 }; 204 205 l5 { 206 regulator-min-microvolt = <1800000>; 207 regulator-max-microvolt = <1800000>; 208 }; 209 210 l6 { 211 regulator-min-microvolt = <1800000>; 212 regulator-max-microvolt = <1800000>; 213 }; 214 215 l7 { 216 regulator-min-microvolt = <1800000>; 217 regulator-max-microvolt = <1800000>; 218 }; 219 220 l8 { 221 regulator-min-microvolt = <2850000>; 222 regulator-max-microvolt = <2900000>; 223 }; 224 225 l9 { 226 regulator-min-microvolt = <3300000>; 227 regulator-max-microvolt = <3300000>; 228 }; 229 230 l10 { 231 regulator-min-microvolt = <2700000>; 232 regulator-max-microvolt = <2800000>; 233 }; 234 235 l11 { 236 regulator-min-microvolt = <1800000>; 237 regulator-max-microvolt = <2950000>; 238 regulator-allow-set-load; 239 regulator-system-load = <200000>; 240 }; 241 242 l12 { 243 regulator-min-microvolt = <1800000>; 244 regulator-max-microvolt = <2950000>; 245 }; 246 247 l13 { 248 regulator-min-microvolt = <3075000>; 249 regulator-max-microvolt = <3075000>; 250 }; 251 252 l14 { 253 regulator-min-microvolt = <1800000>; 254 regulator-max-microvolt = <3300000>; 255 }; 256 257 l15 { 258 regulator-min-microvolt = <1800000>; 259 regulator-max-microvolt = <3300000>; 260 }; 261 262 l16 { 263 regulator-min-microvolt = <1800000>; 264 regulator-max-microvolt = <3300000>; 265 }; 266 267 l17 { 268 regulator-min-microvolt = <2850000>; 269 regulator-max-microvolt = <2850000>; 270 }; 271 272 l18 { 273 regulator-min-microvolt = <2700000>; 274 regulator-max-microvolt = <2700000>; 275 }; 276}; 277 278&msmgpio { 279 accel_int_default: accel-int-default { 280 pins = "gpio115"; 281 function = "gpio"; 282 283 drive-strength = <2>; 284 bias-disable; 285 }; 286 287 gpio_keys_default: gpio-keys-default { 288 pins = "gpio107", "gpio109"; 289 function = "gpio"; 290 291 drive-strength = <2>; 292 bias-pull-up; 293 }; 294 295 gpio_hall_sensor_default: gpio-hall-sensor-default { 296 pins = "gpio52"; 297 function = "gpio"; 298 299 drive-strength = <2>; 300 bias-disable; 301 }; 302 303 mdss { 304 mdss_default: mdss-default { 305 pins = "gpio25"; 306 function = "gpio"; 307 308 drive-strength = <8>; 309 bias-disable; 310 }; 311 mdss_sleep: mdss-sleep { 312 pins = "gpio25"; 313 function = "gpio"; 314 315 drive-strength = <2>; 316 bias-pull-down; 317 }; 318 }; 319 320 muic_i2c_default: muic-i2c-default { 321 pins = "gpio105", "gpio106"; 322 function = "gpio"; 323 324 drive-strength = <2>; 325 bias-disable; 326 }; 327 328 muic_int_default: muic-int-default { 329 pins = "gpio12"; 330 function = "gpio"; 331 332 drive-strength = <2>; 333 bias-disable; 334 }; 335 336 tsp_en_default: tsp-en-default { 337 pins = "gpio73"; 338 function = "gpio"; 339 340 drive-strength = <2>; 341 bias-disable; 342 }; 343}; 344