1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 model = "Asus Zenfone 2 Laser"; 12 compatible = "asus,z00l", "qcom,msm8916"; 13 chassis-type = "handset"; 14 15 aliases { 16 serial0 = &blsp1_uart2; 17 }; 18 19 chosen { 20 stdout-path = "serial0"; 21 }; 22 23 gpio-keys { 24 compatible = "gpio-keys"; 25 26 pinctrl-names = "default"; 27 pinctrl-0 = <&gpio_keys_default>; 28 29 label = "GPIO Buttons"; 30 31 button-volume-up { 32 label = "Volume Up"; 33 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 34 linux,code = <KEY_VOLUMEUP>; 35 debounce-interval = <15>; 36 }; 37 38 button-volume-down { 39 label = "Volume Down"; 40 gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; 41 linux,code = <KEY_VOLUMEDOWN>; 42 debounce-interval = <15>; 43 }; 44 }; 45 46 reg_sd_vmmc: regulator-sdcard-vmmc { 47 compatible = "regulator-fixed"; 48 regulator-name = "sdcard-vmmc"; 49 regulator-min-microvolt = <2950000>; 50 regulator-max-microvolt = <2950000>; 51 52 gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; 53 enable-active-high; 54 55 startup-delay-us = <200>; 56 57 pinctrl-names = "default"; 58 pinctrl-0 = <&sd_vmmc_en_default>; 59 }; 60 61 usb_id: usb-id { 62 compatible = "linux,extcon-usb-gpio"; 63 id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; 64 pinctrl-names = "default"; 65 pinctrl-0 = <&usb_id_default>; 66 }; 67}; 68 69&blsp_i2c2 { 70 status = "okay"; 71 72 magnetometer@c { 73 compatible = "asahi-kasei,ak09911"; 74 reg = <0x0c>; 75 76 vdd-supply = <&pm8916_l8>; 77 vid-supply = <&pm8916_l6>; 78 79 reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; 80 81 pinctrl-names = "default"; 82 pinctrl-0 = <&mag_reset_default>; 83 }; 84 85 imu@68 { 86 compatible = "invensense,mpu6515"; 87 reg = <0x68>; 88 89 interrupt-parent = <&msmgpio>; 90 interrupts = <36 IRQ_TYPE_EDGE_RISING>; 91 92 vdd-supply = <&pm8916_l17>; 93 vddio-supply = <&pm8916_l6>; 94 95 pinctrl-names = "default"; 96 pinctrl-0 = <&imu_default>; 97 98 mount-matrix = "1", "0", "0", 99 "0", "-1", "0", 100 "0", "0", "1"; 101 }; 102}; 103 104&blsp_i2c5 { 105 status = "okay"; 106 107 touchscreen@38 { 108 compatible = "edt,edt-ft5306"; 109 reg = <0x38>; 110 111 interrupt-parent = <&msmgpio>; 112 interrupts = <13 IRQ_TYPE_EDGE_FALLING>; 113 114 reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; 115 116 vcc-supply = <&pm8916_l11>; 117 iovcc-supply = <&pm8916_l6>; 118 119 touchscreen-size-x = <720>; 120 touchscreen-size-y = <1280>; 121 122 pinctrl-names = "default"; 123 pinctrl-0 = <&touchscreen_default>; 124 }; 125}; 126 127&blsp1_uart2 { 128 status = "okay"; 129}; 130 131&sdhc_1 { 132 status = "okay"; 133 134 pinctrl-names = "default", "sleep"; 135 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 136 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 137}; 138 139&sdhc_2 { 140 status = "okay"; 141 vmmc-supply = <®_sd_vmmc>; 142 143 pinctrl-names = "default", "sleep"; 144 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 145 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 146 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; 147}; 148 149&usb { 150 status = "okay"; 151 extcon = <&usb_id>, <&usb_id>; 152}; 153 154&usb_hs_phy { 155 extcon = <&usb_id>; 156}; 157 158&wcnss { 159 status = "okay"; 160}; 161 162&wcnss_iris { 163 compatible = "qcom,wcn3620"; 164}; 165 166&smd_rpm_regulators { 167 vdd_l1_l2_l3-supply = <&pm8916_s3>; 168 vdd_l4_l5_l6-supply = <&pm8916_s4>; 169 vdd_l7-supply = <&pm8916_s4>; 170 171 s3 { 172 regulator-min-microvolt = <1200000>; 173 regulator-max-microvolt = <1300000>; 174 }; 175 176 s4 { 177 regulator-min-microvolt = <1800000>; 178 regulator-max-microvolt = <2100000>; 179 }; 180 181 l1 { 182 regulator-min-microvolt = <1225000>; 183 regulator-max-microvolt = <1225000>; 184 }; 185 186 l2 { 187 regulator-min-microvolt = <1200000>; 188 regulator-max-microvolt = <1200000>; 189 }; 190 191 l4 { 192 regulator-min-microvolt = <2050000>; 193 regulator-max-microvolt = <2050000>; 194 }; 195 196 l5 { 197 regulator-min-microvolt = <1800000>; 198 regulator-max-microvolt = <1800000>; 199 }; 200 201 l6 { 202 regulator-min-microvolt = <1800000>; 203 regulator-max-microvolt = <1800000>; 204 }; 205 206 l7 { 207 regulator-min-microvolt = <1800000>; 208 regulator-max-microvolt = <1800000>; 209 }; 210 211 l8 { 212 regulator-min-microvolt = <2850000>; 213 regulator-max-microvolt = <2900000>; 214 }; 215 216 l9 { 217 regulator-min-microvolt = <3300000>; 218 regulator-max-microvolt = <3300000>; 219 }; 220 221 l10 { 222 regulator-min-microvolt = <2700000>; 223 regulator-max-microvolt = <2800000>; 224 }; 225 226 l11 { 227 regulator-min-microvolt = <1800000>; 228 regulator-max-microvolt = <2950000>; 229 regulator-allow-set-load; 230 regulator-system-load = <200000>; 231 }; 232 233 l12 { 234 regulator-min-microvolt = <1800000>; 235 regulator-max-microvolt = <2950000>; 236 }; 237 238 l13 { 239 regulator-min-microvolt = <3075000>; 240 regulator-max-microvolt = <3075000>; 241 }; 242 243 l14 { 244 regulator-min-microvolt = <1800000>; 245 regulator-max-microvolt = <3300000>; 246 }; 247 248 l15 { 249 regulator-min-microvolt = <1800000>; 250 regulator-max-microvolt = <3300000>; 251 }; 252 253 l16 { 254 regulator-min-microvolt = <1800000>; 255 regulator-max-microvolt = <3300000>; 256 }; 257 258 l17 { 259 regulator-min-microvolt = <2850000>; 260 regulator-max-microvolt = <2850000>; 261 }; 262 263 l18 { 264 regulator-min-microvolt = <2700000>; 265 regulator-max-microvolt = <2700000>; 266 }; 267}; 268 269&msmgpio { 270 gpio_keys_default: gpio-keys-default-state { 271 pins = "gpio107", "gpio117"; 272 function = "gpio"; 273 274 drive-strength = <2>; 275 bias-pull-up; 276 }; 277 278 imu_default: imu-default-state { 279 pins = "gpio36"; 280 function = "gpio"; 281 282 drive-strength = <2>; 283 bias-disable; 284 }; 285 286 mag_reset_default: mag-reset-default-state { 287 pins = "gpio112"; 288 function = "gpio"; 289 290 drive-strength = <2>; 291 bias-disable; 292 }; 293 294 sd_vmmc_en_default: sd-vmmc-en-default-state { 295 pins = "gpio87"; 296 function = "gpio"; 297 298 drive-strength = <2>; 299 bias-disable; 300 }; 301 302 touchscreen_default: touchscreen-default-state { 303 touch-pins { 304 pins = "gpio13"; 305 function = "gpio"; 306 307 drive-strength = <2>; 308 bias-pull-up; 309 }; 310 311 reset-pins { 312 pins = "gpio12"; 313 function = "gpio"; 314 315 drive-strength = <2>; 316 bias-disable; 317 }; 318 }; 319 320 usb_id_default: usb-id-default-state { 321 pins = "gpio110"; 322 function = "gpio"; 323 324 drive-strength = <8>; 325 bias-pull-up; 326 }; 327}; 328