1// SPDX-License-Identifier: GPL-2.0-only 2/dts-v1/; 3/* Copyright (c) 2017, The Linux Foundation. All rights reserved. 4 */ 5#include "ipq8074.dtsi" 6 7/ { 8 model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; 9 compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; 10 11 aliases { 12 serial0 = &blsp1_uart5; 13 serial1 = &blsp1_uart3; 14 }; 15 16 chosen { 17 stdout-path = "serial0"; 18 }; 19 20 memory@40000000 { 21 device_type = "memory"; 22 reg = <0x0 0x40000000 0x0 0x20000000>; 23 }; 24 25 vreg_dummy: regulator-dummy { }; 26}; 27 28&blsp1_i2c2 { 29 status = "okay"; 30}; 31 32&blsp1_spi1 { 33 status = "okay"; 34 35 flash@0 { 36 #address-cells = <1>; 37 #size-cells = <1>; 38 compatible = "jedec,spi-nor"; 39 reg = <0>; 40 spi-max-frequency = <50000000>; 41 }; 42}; 43 44&blsp1_uart3 { 45 status = "okay"; 46}; 47 48&blsp1_uart5 { 49 status = "okay"; 50}; 51 52&pcie0 { 53 status = "okay"; 54 perst-gpio = <&tlmm 61 0x1>; 55}; 56 57&pcie1 { 58 status = "okay"; 59 perst-gpio = <&tlmm 58 0x1>; 60}; 61 62&pcie_phy0 { 63 status = "okay"; 64}; 65 66&pcie_phy1 { 67 status = "okay"; 68}; 69 70&qpic_bam { 71 status = "okay"; 72}; 73 74&qpic_nand { 75 status = "okay"; 76 77 nand@0 { 78 reg = <0>; 79 nand-ecc-strength = <4>; 80 nand-ecc-step-size = <512>; 81 nand-bus-width = <8>; 82 }; 83}; 84 85&sdhc_1 { 86 status = "okay"; 87}; 88 89&qusb_phy_0 { 90 status = "okay"; 91}; 92 93&qusb_phy_1 { 94 status = "okay"; 95}; 96 97&ssphy_0 { 98 status = "okay"; 99 vdda-phy-supply = <&vreg_dummy>; 100 vdda-pll-supply = <&vreg_dummy>; 101}; 102 103&ssphy_1 { 104 status = "okay"; 105 vdda-phy-supply = <&vreg_dummy>; 106 vdda-pll-supply = <&vreg_dummy>; 107}; 108 109&usb_0 { 110 status = "okay"; 111}; 112 113&usb_1 { 114 status = "okay"; 115}; 116