xref: /freebsd/sys/contrib/device-tree/src/arm64/qcom/hamoa-iot-evk.dts (revision 69ed3df4f588860308677cda76cbcce1f19a54c9)

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 */

/dts-v1/;

#include <dt-bindings/leds/common.h>
#include "hamoa-iot-som.dtsi"
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

/ {
	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
	compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
	chassis-type = "embedded";

	aliases {
		serial0 = &uart21;
		serial1 = &uart14;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pmk8550_pwm 0 5000000>;
		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
		power-supply = <&vreg_edp_bl>;

		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
		pinctrl-names = "default";
	};

	wcd938x: audio-codec {
		compatible = "qcom,wcd9385-codec";

		pinctrl-0 = <&wcd_default>;
		pinctrl-names = "default";

		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;

		qcom,micbias1-microvolt = <1800000>;
		qcom,micbias2-microvolt = <1800000>;
		qcom,micbias3-microvolt = <1800000>;
		qcom,micbias4-microvolt = <1800000>;
		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
							 500000 500000 500000 500000>;
		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
		qcom,rx-device = <&wcd_rx>;
		qcom,tx-device = <&wcd_tx>;

		vdd-buck-supply = <&vreg_l15b_1p8>;
		vdd-rxtx-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l15b_1p8>;
		vdd-mic-bias-supply = <&vreg_bob1>;

		#sound-dai-cells = <1>;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	connector3 {
		compatible = "usb-a-connector";
		label = "USB-3-Type-A";
		power-role = "source";

		vbus-supply = <&regulator_usb3_vbus>;

		port {
			connector_3_in: endpoint {
			};
		};
	};

	connector6 {
		compatible = "usb-a-connector";
		label = "USB-6-Type-A";
		power-role = "source";

		vbus-supply = <&regulator_usb6_vbus>;

		port {
			connector_4_in: endpoint {
			};
		};
	};

	pmic-glink {
		compatible = "qcom,x1e80100-pmic-glink",
			     "qcom,sm8550-pmic-glink",
			     "qcom,pmic-glink";
		#address-cells = <1>;
		#size-cells = <0>;
		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
				    <&tlmm 125 GPIO_ACTIVE_HIGH>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_ss0_hs_in: endpoint {
						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss0_ss_in: endpoint {
						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
					};
				};

				port@2 {
					reg = <2>;

					pmic_glink_ss0_sbu: endpoint {
						remote-endpoint = <&usb_1_ss0_sbu_mux>;
					};
				};
			};
		};

		connector@1 {
			compatible = "usb-c-connector";
			reg = <1>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_ss1_hs_in: endpoint {
						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss1_ss_in: endpoint {
						remote-endpoint = <&retimer_ss1_ss_out>;
					};
				};

				port@2 {
					reg = <2>;

					pmic_glink_ss1_con_sbu_in: endpoint {
						remote-endpoint = <&retimer_ss1_con_sbu_out>;
					};
				};
			};
		};

		connector@2 {
			compatible = "usb-c-connector";
			reg = <2>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_ss2_hs_in: endpoint {
						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss2_ss_in: endpoint {
						remote-endpoint = <&retimer_ss2_ss_out>;
					};
				};

				port@2 {
					reg = <2>;

					pmic_glink_ss2_con_sbu_in: endpoint {
						remote-endpoint = <&retimer_ss2_con_sbu_out>;
					};
				};
			};
		};
	};

	vreg_edp_3p3: regulator-edp-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_EDP_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&edp_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_edp_bl: regulator-edp-bl {
		compatible = "regulator-fixed";

		regulator-name = "VBL9";
		regulator-min-microvolt = <3600000>;
		regulator-max-microvolt = <3600000>;

		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&edp_bl_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_nvme: regulator-nvme {
		compatible = "regulator-fixed";

		regulator-name = "VREG_NVME_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&nvme_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_pcie_12v: regulator-pcie-12v {
		compatible = "regulator-fixed";

		regulator-name = "VREG_PCIE_12V";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;

		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&pcie_x8_12v>;
		pinctrl-names = "default";
	};

	vreg_pcie_3v3: regulator-pcie-3v3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_PCIE_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&pm_sde7_main_3p3_en>;
		pinctrl-names = "default";
	};

	vreg_pcie_3v3_aux: regulator-pcie-3v3-aux {
		compatible = "regulator-fixed";

		regulator-name = "VREG_PCIE_3P3_AUX";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
		pinctrl-names = "default";
	};

	/* Left unused as the retimer is not used on this board. */
	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR0_1P15";
		regulator-min-microvolt = <1150000>;
		regulator-max-microvolt = <1150000>;

		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR0_1P8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;

		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb0_1p8_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR0_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb0_3p3_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR1_1P15";
		regulator-min-microvolt = <1150000>;
		regulator-max-microvolt = <1150000>;

		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR1_1P8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;

		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR1_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR2_1P15";
		regulator-min-microvolt = <1150000>;
		regulator-max-microvolt = <1150000>;

		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR2_1P8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;

		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_RTMR2_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	regulator_usb3_vbus: regulator-usb3-vbus {
		compatible = "regulator-fixed";
		regulator-name = "USB3_VBUS";
		gpio = <&pm8550ve_9_gpios 4 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&usb3_en>;
		pinctrl-names = "default";
		enable-active-high;
		regulator-always-on;
	};

	regulator_usb6_vbus: regulator-usb6-vbus {
		compatible = "regulator-fixed";
		regulator-name = "USB6_VBUS";
		gpio = <&pm8550ve_9_gpios 5 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&usb6_en>;
		pinctrl-names = "default";
		enable-active-high;
		regulator-always-on;
	};

	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";

		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;

		regulator-always-on;
		regulator-boot-on;
	};

	/*
	 * TODO: These two regulators are actually part of the removable M.2
	 * card and not the EVK mainboard. Need to describe this differently.
	 * Functionally it works correctly, because all we need to do is to
	 * turn on the actual 3.3V supply above.
	 */
	vreg_wcn_0p95: regulator-wcn-0p95 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_WCN_0P95";
		regulator-min-microvolt = <950000>;
		regulator-max-microvolt = <950000>;

		vin-supply = <&vreg_wcn_3p3>;
	};

	vreg_wcn_1p9: regulator-wcn-1p9 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_WCN_1P9";
		regulator-min-microvolt = <1900000>;
		regulator-max-microvolt = <1900000>;

		vin-supply = <&vreg_wcn_3p3>;
	};

	vreg_wcn_3p3: regulator-wcn-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_WCN_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&wcn_sw_en>;
		pinctrl-names = "default";

		regulator-always-on;
		regulator-boot-on;
	};

	vreg_wwan: regulator-wwan {
		compatible = "regulator-fixed";

		regulator-name = "SDX_VPH_PWR";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&wwan_sw_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	sound {
		compatible = "qcom,x1e80100-sndcard";
		model = "X1E80100-EVK";
		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
				"IN1_HPHL", "HPHL_OUT",
				"IN2_HPHR", "HPHR_OUT",
				"AMIC2", "MIC BIAS2",
				"VA DMIC0", "MIC BIAS3",
				"VA DMIC1", "MIC BIAS3",
				"VA DMIC2", "MIC BIAS1",
				"VA DMIC3", "MIC BIAS1",
				"TX SWR_INPUT1", "ADC2_OUTPUT";

		wcd-playback-dai-link {
			link-name = "WCD Playback";

			codec {
				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
			};

			cpu {
				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		wcd-capture-dai-link {
			link-name = "WCD Capture";

			codec {
				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
			};

			cpu {
				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		wsa-dai-link {
			link-name = "WSA Playback";

			codec {
				sound-dai = <&left_woofer>,
					    <&left_tweeter>,
					    <&swr0 0>,
					    <&lpass_wsamacro 0>,
					    <&right_woofer>,
					    <&right_tweeter>,
					    <&swr3 0>,
					    <&lpass_wsa2macro 0>;
			};

			cpu {
				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		va-dai-link {
			link-name = "VA Capture";

			codec {
				sound-dai = <&lpass_vamacro 0>;
			};

			cpu {
				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		dp0-dai-link {
			link-name = "DP0 Playback";

			codec {
				sound-dai = <&mdss_dp0>;
			};

			cpu {
				sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		dp1-dai-link {
			link-name = "DP1 Playback";

			codec {
				sound-dai = <&mdss_dp1>;
			};

			cpu {
				sound-dai = <&q6apmbedai DISPLAY_PORT_RX_1>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};
	};

	usb-1-ss0-sbu-mux {
		compatible = "onnn,fsusb42", "gpio-sbu-mux";

		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;

		pinctrl-0 = <&usb_1_ss0_sbu_default>;
		pinctrl-names = "default";

		mode-switch;
		orientation-switch;

		port {
			usb_1_ss0_sbu_mux: endpoint {
				remote-endpoint = <&pmic_glink_ss0_sbu>;
			};
		};
	};

	wcn7850-pmu {
		compatible = "qcom,wcn7850-pmu";

		vdd-supply = <&vreg_wcn_0p95>;
		vddio-supply = <&vreg_l15b_1p8>;
		vddaon-supply = <&vreg_wcn_0p95>;
		vdddig-supply = <&vreg_wcn_0p95>;
		vddrfa1p2-supply = <&vreg_wcn_1p9>;
		vddrfa1p8-supply = <&vreg_wcn_1p9>;

		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;

		pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>;
		pinctrl-names = "default";

		regulators {
			vreg_pmu_rfa_cmn: ldo0 {
				regulator-name = "vreg_pmu_rfa_cmn";
			};

			vreg_pmu_aon_0p59: ldo1 {
				regulator-name = "vreg_pmu_aon_0p59";
			};

			vreg_pmu_wlcx_0p8: ldo2 {
				regulator-name = "vreg_pmu_wlcx_0p8";
			};

			vreg_pmu_wlmx_0p85: ldo3 {
				regulator-name = "vreg_pmu_wlmx_0p85";
			};

			vreg_pmu_btcmx_0p85: ldo4 {
				regulator-name = "vreg_pmu_btcmx_0p85";
			};

			vreg_pmu_rfa_0p8: ldo5 {
				regulator-name = "vreg_pmu_rfa_0p8";
			};

			vreg_pmu_rfa_1p2: ldo6 {
				regulator-name = "vreg_pmu_rfa_1p2";
			};

			vreg_pmu_rfa_1p8: ldo7 {
				regulator-name = "vreg_pmu_rfa_1p8";
			};

			vreg_pmu_pcie_0p9: ldo8 {
				regulator-name = "vreg_pmu_pcie_0p9";
			};

			vreg_pmu_pcie_1p8: ldo9 {
				regulator-name = "vreg_pmu_pcie_1p8";
			};
		};
	};
};

&i2c1 {
	clock-frequency = <400000>;
	status = "okay";

	typec-mux@8 {
		compatible = "parade,ps8830";
		reg = <0x08>;

		clocks = <&rpmhcc RPMH_RF_CLK5>;

		vdd-supply = <&vreg_rtmr2_1p15>;
		vdd33-supply = <&vreg_rtmr2_3p3>;
		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
		vddar-supply = <&vreg_rtmr2_1p15>;
		vddat-supply = <&vreg_rtmr2_1p15>;
		vddio-supply = <&vreg_rtmr2_1p8>;

		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&rtmr2_default>;
		pinctrl-names = "default";

		orientation-switch;
		retimer-switch;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				retimer_ss2_ss_out: endpoint {
					remote-endpoint = <&pmic_glink_ss2_ss_in>;
				};
			};

			port@1 {
				reg = <1>;

				retimer_ss2_ss_in: endpoint {
					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
				};
			};

			port@2 {
				reg = <2>;

				retimer_ss2_con_sbu_out: endpoint {
					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
				};
			};
		};
	};
};

&i2c5 {
	clock-frequency = <400000>;

	status = "okay";

	eusb3_repeater: redriver@47 {
		compatible = "nxp,ptn3222";
		reg = <0x47>;
		#phy-cells = <0>;

		vdd3v3-supply = <&vreg_l13b_3p0>;
		vdd1v8-supply = <&vreg_l4b_1p8>;

		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&eusb3_reset_n>;
		pinctrl-names = "default";
	};

	eusb5_repeater: redriver@43 {
		compatible = "nxp,ptn3222";
		reg = <0x43>;
		#phy-cells = <0>;

		vdd3v3-supply = <&vreg_l13b_3p0>;
		vdd1v8-supply = <&vreg_l4b_1p8>;

		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&eusb5_reset_n>;
		pinctrl-names = "default";
	};

	eusb6_repeater: redriver@4f {
		compatible = "nxp,ptn3222";
		reg = <0x4f>;
		#phy-cells = <0>;

		vdd3v3-supply = <&vreg_l13b_3p0>;
		vdd1v8-supply = <&vreg_l4b_1p8>;

		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&eusb6_reset_n>;
		pinctrl-names = "default";
	};
};

&i2c7 {
	clock-frequency = <400000>;

	status = "okay";

	typec-mux@8 {
		compatible = "parade,ps8830";
		reg = <0x8>;

		clocks = <&rpmhcc RPMH_RF_CLK4>;

		vdd-supply = <&vreg_rtmr1_1p15>;
		vdd33-supply = <&vreg_rtmr1_3p3>;
		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
		vddar-supply = <&vreg_rtmr1_1p15>;
		vddat-supply = <&vreg_rtmr1_1p15>;
		vddio-supply = <&vreg_rtmr1_1p8>;

		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&rtmr1_default>;
		pinctrl-names = "default";

		retimer-switch;
		orientation-switch;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				retimer_ss1_ss_out: endpoint {
					remote-endpoint = <&pmic_glink_ss1_ss_in>;
				};
			};

			port@1 {
				reg = <1>;

				retimer_ss1_ss_in: endpoint {
					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
				};
			};

			port@2 {
				reg = <2>;

				retimer_ss1_con_sbu_out: endpoint {
					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
				};
			};
		};
	};
};

&lpass_tlmm {
	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
		pins = "gpio12";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
		pins = "gpio13";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
		pins = "gpio17";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	spkr_3_sd_n_active: spkr-3-sd-n-active-state {
		pins = "gpio18";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};
};

&lpass_vamacro {
	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
	pinctrl-names = "default";

	vdd-micb-supply = <&vreg_l1b_1p8>;
	qcom,dmic-sample-rate = <4800000>;
};

&mdss {
	status = "okay";
};

&mdss_dp0 {
	status = "okay";
};

&mdss_dp0_out {
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};

&mdss_dp1 {
	status = "okay";
};

&mdss_dp1_out {
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};

&mdss_dp2 {
	status = "okay";
};

&mdss_dp2_out {
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};

&mdss_dp3 {
	/delete-property/ #sound-dai-cells;

	pinctrl-0 = <&edp0_hpd_default>;
	pinctrl-names = "default";

	status = "okay";

	aux-bus {
		panel {
			compatible = "edp-panel";

			backlight = <&backlight>;
			power-supply = <&vreg_edp_3p3>;

			port {
				edp_panel_in: endpoint {
					remote-endpoint = <&mdss_dp3_out>;
				};
			};
		};
	};
};

&mdss_dp3_out {
	data-lanes = <0 1 2 3>;
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;

	remote-endpoint = <&edp_panel_in>;
};

&mdss_dp3_phy {
	vdda-phy-supply = <&vreg_l3j_0p8>;
	vdda-pll-supply = <&vreg_l2j_1p2>;

	status = "okay";
};

&pcie3_port0 {
	vpcie12v-supply = <&vreg_pcie_12v>;
	vpcie3v3-supply = <&vreg_pcie_3v3>;
	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;

	reset-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
};

&pcie4_port0 {
	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;

	wifi@0 {
		compatible = "pci17cb,1107";
		reg = <0x10000 0x0 0x0 0x0 0x0>;

		vddaon-supply = <&vreg_pmu_aon_0p59>;
		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
	};
};

&pcie5 {
	vddpe-3v3-supply = <&vreg_wwan>;
};

&pcie5_port0 {
	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
};

&pcie6a {
	vddpe-3v3-supply = <&vreg_nvme>;
};

&pcie6a_port0 {
	reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
};

&pm8550_gpios {
	rtmr0_default: rtmr0-reset-n-active-state {
		pins = "gpio10";
		function = "normal";
		power-source = <1>; /* 1.8V */
		bias-disable;
		input-disable;
		output-enable;
	};

	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
		pins = "gpio11";
		function = "normal";
		power-source = <1>; /* 1.8V */
		bias-disable;
		input-disable;
		output-enable;
	};
};

&pm8550ve_8_gpios {
	pcie_x8_12v: pcie-12v-default-state {
		pins = "gpio8";
		function = "normal";
		output-enable;
		output-high;
		bias-pull-down;
		power-source = <0>;
	};
};

&pm8550ve_9_gpios {
	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
		pins = "gpio8";
		function = "normal";
		power-source = <1>; /* 1.8V */
		bias-disable;
		input-disable;
		output-enable;
	};

	usb3_en: usb3-en-state {
		pins = "gpio4";
		function = "normal";
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
		output-enable;
		power-source = <0>;
	};

	usb6_en: usb6-en-state {
		pins = "gpio5";
		function = "normal";
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
		output-enable;
		power-source = <0>;
	};
};

&pm8550_pwm {
	status = "okay";

	multi-led {
		color = <LED_COLOR_ID_MULTI>;
		function = LED_FUNCTION_STATUS;

		#address-cells = <1>;
		#size-cells = <0>;

		led@1 {
			reg = <1>;
			color = <LED_COLOR_ID_RED>;
		};

		led@2 {
			reg = <2>;
			color = <LED_COLOR_ID_GREEN>;
		};
	};
};

&pmc8380_3_gpios {
	edp_bl_en: edp-bl-en-state {
		pins = "gpio4";
		function = "normal";
		power-source = <1>;
		input-disable;
		output-enable;
	};

	edp_bl_reg_en: edp-bl-reg-en-state {
		pins = "gpio10";
		function = "normal";
	};

	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
		pins = "gpio8";
		function = "normal";
		output-enable;
		bias-pull-down;
		power-source = <0>;
	};

	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
		pins = "gpio6";
		function = "normal";
		output-enable;
		bias-pull-down;
		power-source = <0>;
	};
};

&pmc8380_5_gpios {
	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
		pins = "gpio8";
		function = "normal";
		power-source = <1>; /* 1.8V */
		bias-disable;
		input-disable;
		output-enable;
	};
};

&pmk8550_gpios {
	edp_bl_pwm: edp-bl-pwm-state {
		pins = "gpio5";
		function = "func3";
	};
};

&pmk8550_pwm {
	status = "okay";
};

&sdhc_2 {
	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;

	vmmc-supply = <&vreg_l9b_2p9>;
	vqmmc-supply = <&vreg_l6b_1p8>;

	no-sdio;
	no-mmc;

	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
	pinctrl-names = "default", "sleep";

	status = "okay";
};

&smb2360_0 {
	status = "okay";
};

&smb2360_0_eusb2_repeater {
	vdd18-supply = <&vreg_l3d_1p8>;
	vdd3-supply = <&vreg_l2b_3p0>;
};

&smb2360_1 {
	status = "okay";
};

&smb2360_1_eusb2_repeater {
	vdd18-supply = <&vreg_l3d_1p8>;
	vdd3-supply = <&vreg_l14b_3p0>;
};

&smb2360_2 {
	status = "okay";
};

&smb2360_2_eusb2_repeater {
	vdd18-supply = <&vreg_l3d_1p8>;
	vdd3-supply = <&vreg_l8b_3p0>;
};

&spi11 {
	status = "okay";

	tpm@0 {
		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
		reg = <0>;
		spi-max-frequency = <20000000>;
	};
};

&swr0 {
	status = "okay";

	pinctrl-0 = <&wsa_swr_active>;
	pinctrl-names = "default";

	/* WSA8845, Left Woofer */
	left_woofer: speaker@0,0 {
		compatible = "sdw20217020400";
		pinctrl-0 = <&spkr_0_sd_n_active>;
		pinctrl-names = "default";
		reg = <0 0>;
		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		sound-name-prefix = "WooferLeft";
		vdd-1p8-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l12b_1p2>;
		qcom,port-mapping = <1 2 3 7 10 13>;
	};

	/* WSA8845, Left Tweeter */
	left_tweeter: speaker@0,1 {
		compatible = "sdw20217020400";
		pinctrl-0 = <&spkr_1_sd_n_active>;
		pinctrl-names = "default";
		reg = <0 1>;
		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		sound-name-prefix = "TweeterLeft";
		vdd-1p8-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l12b_1p2>;
		qcom,port-mapping = <4 5 6 7 11 13>;
	};
};

&swr1 {
	status = "okay";

	/* WCD9385 RX */
	wcd_rx: codec@0,4 {
		compatible = "sdw20217010d00";
		reg = <0 4>;
		qcom,rx-port-mapping = <1 2 3 4 5>;
	};
};

&swr2 {
	status = "okay";

	/* WCD9385 TX */
	wcd_tx: codec@0,3 {
		compatible = "sdw20217010d00";
		reg = <0 3>;
		qcom,tx-port-mapping = <2 2 3 4>;
	};
};

&swr3 {
	status = "okay";

	pinctrl-0 = <&wsa2_swr_active>;
	pinctrl-names = "default";

	/* WSA8845, Right Woofer */
	right_woofer: speaker@0,0 {
		compatible = "sdw20217020400";
		pinctrl-0 = <&spkr_2_sd_n_active>;
		pinctrl-names = "default";
		reg = <0 0>;
		reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		sound-name-prefix = "WooferRight";
		vdd-1p8-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l12b_1p2>;
		qcom,port-mapping = <1 2 3 7 10 13>;
	};

	/* WSA8845, Right Tweeter */
	right_tweeter: speaker@0,1 {
		compatible = "sdw20217020400";
		pinctrl-0 = <&spkr_3_sd_n_active>;
		pinctrl-names = "default";
		reg = <0 1>;
		reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		sound-name-prefix = "TweeterRight";
		vdd-1p8-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l12b_1p2>;
		qcom,port-mapping = <4 5 6 7 11 13>;
	};
};

&tlmm {
	edp_reg_en: edp-reg-en-state {
		pins = "gpio70";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	eusb3_reset_n: eusb3-reset-n-state {
		pins = "gpio6";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
		output-low;
	};

	eusb5_reset_n: eusb5-reset-n-state {
		pins = "gpio7";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
		output-low;
	};

	eusb6_reset_n: eusb6-reset-n-state {
		pins = "gpio184";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
		output-low;
	};

	nvme_reg_en: nvme-reg-en-state {
		pins = "gpio18";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	rtmr1_default: rtmr1-reset-n-active-state {
		pins = "gpio176";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	rtmr2_default: rtmr2-reset-n-active-state {
		pins = "gpio185";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	sdc2_card_det_n: sd-card-det-n-state {
		pins = "gpio71";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
		pins = "gpio188";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
		pins = "gpio175";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
		pins = "gpio186";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
		pins = "gpio189";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
		pins = "gpio126";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
		pins = "gpio187";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
		mode-pins {
			pins = "gpio166";
			function = "gpio";
			bias-disable;
			drive-strength = <2>;
			output-high;
		};

		oe-n-pins {
			pins = "gpio168";
			function = "gpio";
			bias-disable;
			drive-strength = <2>;
		};

		sel-pins {
			pins = "gpio167";
			function = "gpio";
			bias-disable;
			drive-strength = <2>;
		};
	};

	wcd_default: wcd-reset-n-active-state {
		pins = "gpio191";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
		output-low;
	};

	wcn_bt_en: wcn-bt-en-state {
		pins = "gpio116";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	wcn_wlan_en: wcn-wlan-en-state {
		pins = "gpio117";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	wwan_sw_en: wwan-sw-en-state {
		pins = "gpio221";
		function = "gpio";
		drive-strength = <4>;
		bias-disable;
	};

	wcn_sw_en: wcn-sw-en-state {
		pins = "gpio214";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	/* Switches USB signal routing between the USB connector and the Wi-Fi card. */
	wcn_usb_sw_n: wcn-usb-sw-n-state {
		pins = "gpio225";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
		output-high;
	};
};

&uart14 {
	status = "okay";

	bluetooth {
		compatible = "qcom,wcn7850-bt";
		max-speed = <3200000>;

		vddaon-supply = <&vreg_pmu_aon_0p59>;
		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
	};
};

&uart21 {
	compatible = "qcom,geni-debug-uart";

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vreg_l3i_0p8>;
	vdda-pll-supply = <&vreg_l3e_1p2>;

	status = "okay";
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;

	vcc-supply = <&vreg_l17b_2p5>;
	vcc-max-microamp = <1300000>;
	vccq-supply = <&vreg_l2i_1p2>;
	vccq-max-microamp = <1200000>;

	status = "okay";
};

&usb_1_ss0_dwc3_hs {
	remote-endpoint = <&pmic_glink_ss0_hs_in>;
};

&usb_1_ss0_hsphy {
	phys = <&smb2360_0_eusb2_repeater>;
};

&usb_1_ss0_qmpphy_out {
	remote-endpoint = <&pmic_glink_ss0_ss_in>;
};

&usb_1_ss1_dwc3_hs {
	remote-endpoint = <&pmic_glink_ss1_hs_in>;
};

&usb_1_ss1_hsphy {
	phys = <&smb2360_1_eusb2_repeater>;
};

&usb_1_ss1_qmpphy_out {
	remote-endpoint = <&retimer_ss1_ss_in>;
};

&usb_1_ss2_dwc3_hs {
	remote-endpoint = <&pmic_glink_ss2_hs_in>;
};

&usb_1_ss2_hsphy {
	phys = <&smb2360_2_eusb2_repeater>;
};

&usb_1_ss2_qmpphy_out {
	remote-endpoint = <&retimer_ss2_ss_in>;
};

&usb_2_hsphy {
	phys = <&eusb5_repeater>;

	pinctrl-0 = <&wcn_usb_sw_n>;
	pinctrl-names = "default";
};

&usb_mp_hsphy0 {
	phys = <&eusb3_repeater>;
};

&usb_mp_hsphy1 {
	phys = <&eusb6_repeater>;
};

&thermal_zones {
	gpuss-0-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-1-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-2-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-3-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-4-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-5-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-6-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};

	gpuss-7-thermal {
		trips {
			trip-point0 {
				temperature = <105000>;
			};
		};
	};
};