xref: /freebsd/sys/contrib/device-tree/src/arm64/mediatek/mt8195-demo.dts (revision 7ef62cebc2f965b0f640263e179276928885e33d) 
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright (C) 2022 BayLibre, SAS.
4 * Author: Fabien Parent <fparent@baylibre.com>
5 */
6/dts-v1/;
7
8#include "mt8195.dtsi"
9#include "mt6359.dtsi"
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/input/input.h>
13#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
14#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
15
16/ {
17	model = "MediaTek MT8195 demo board";
18	compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
19
20	aliases {
21		serial0 = &uart0;
22	};
23
24	chosen {
25		stdout-path = "serial0:921600n8";
26	};
27
28	firmware {
29		optee {
30			compatible = "linaro,optee-tz";
31			method = "smc";
32		};
33	};
34
35	gpio-keys {
36		compatible = "gpio-keys";
37		pinctrl-names = "default";
38		pinctrl-0 = <&gpio_keys_pins>;
39
40		key-0 {
41			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
42			label = "volume_up";
43			linux,code = <KEY_VOLUMEUP>;
44			wakeup-source;
45			debounce-interval = <15>;
46		};
47	};
48
49	memory@40000000 {
50		device_type = "memory";
51		reg = <0 0x40000000 0 0x80000000>;
52	};
53
54	reserved-memory {
55		#address-cells = <2>;
56		#size-cells = <2>;
57		ranges;
58
59		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
60		bl31_secmon_reserved: secmon@54600000 {
61			no-map;
62			reg = <0 0x54600000 0x0 0x30000>;
63		};
64
65		/* 12 MiB reserved for OP-TEE (BL32)
66		 * +-----------------------+ 0x43e0_0000
67		 * |      SHMEM 2MiB       |
68		 * +-----------------------+ 0x43c0_0000
69		 * |        | TA_RAM  8MiB |
70		 * + TZDRAM +--------------+ 0x4340_0000
71		 * |        | TEE_RAM 2MiB |
72		 * +-----------------------+ 0x4320_0000
73		 */
74		optee_reserved: optee@43200000 {
75			no-map;
76			reg = <0 0x43200000 0 0x00c00000>;
77		};
78	};
79};
80
81&i2c6 {
82	clock-frequency = <400000>;
83	pinctrl-0 = <&i2c6_pins>;
84	pinctrl-names = "default";
85	status = "okay";
86
87	mt6360: pmic@34 {
88		compatible = "mediatek,mt6360";
89		reg = <0x34>;
90		interrupt-controller;
91		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
92		interrupt-names = "IRQB";
93
94		charger {
95			compatible = "mediatek,mt6360-chg";
96			richtek,vinovp-microvolt = <14500000>;
97
98			otg_vbus_regulator: usb-otg-vbus-regulator {
99				regulator-compatible = "usb-otg-vbus";
100				regulator-name = "usb-otg-vbus";
101				regulator-min-microvolt = <4425000>;
102				regulator-max-microvolt = <5825000>;
103			};
104		};
105
106		regulator {
107			compatible = "mediatek,mt6360-regulator";
108			LDO_VIN3-supply = <&mt6360_buck2>;
109
110			mt6360_buck1: buck1 {
111				regulator-compatible = "BUCK1";
112				regulator-name = "mt6360,buck1";
113				regulator-min-microvolt = <300000>;
114				regulator-max-microvolt = <1300000>;
115				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
116							   MT6360_OPMODE_LP
117							   MT6360_OPMODE_ULP>;
118				regulator-always-on;
119			};
120
121			mt6360_buck2: buck2 {
122				regulator-compatible = "BUCK2";
123				regulator-name = "mt6360,buck2";
124				regulator-min-microvolt = <300000>;
125				regulator-max-microvolt = <1300000>;
126				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
127							   MT6360_OPMODE_LP
128							   MT6360_OPMODE_ULP>;
129				regulator-always-on;
130			};
131
132			mt6360_ldo1: ldo1 {
133				regulator-compatible = "LDO1";
134				regulator-name = "mt6360,ldo1";
135				regulator-min-microvolt = <1200000>;
136				regulator-max-microvolt = <3600000>;
137				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
138							   MT6360_OPMODE_LP>;
139			};
140
141			mt6360_ldo2: ldo2 {
142				regulator-compatible = "LDO2";
143				regulator-name = "mt6360,ldo2";
144				regulator-min-microvolt = <1200000>;
145				regulator-max-microvolt = <3600000>;
146				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
147							   MT6360_OPMODE_LP>;
148			};
149
150			mt6360_ldo3: ldo3 {
151				regulator-compatible = "LDO3";
152				regulator-name = "mt6360,ldo3";
153				regulator-min-microvolt = <1200000>;
154				regulator-max-microvolt = <3600000>;
155				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
156							   MT6360_OPMODE_LP>;
157			};
158
159			mt6360_ldo5: ldo5 {
160				regulator-compatible = "LDO5";
161				regulator-name = "mt6360,ldo5";
162				regulator-min-microvolt = <2700000>;
163				regulator-max-microvolt = <3600000>;
164				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
165							   MT6360_OPMODE_LP>;
166			};
167
168			mt6360_ldo6: ldo6 {
169				regulator-compatible = "LDO6";
170				regulator-name = "mt6360,ldo6";
171				regulator-min-microvolt = <500000>;
172				regulator-max-microvolt = <2100000>;
173				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
174							   MT6360_OPMODE_LP>;
175			};
176
177			mt6360_ldo7: ldo7 {
178				regulator-compatible = "LDO7";
179				regulator-name = "mt6360,ldo7";
180				regulator-min-microvolt = <500000>;
181				regulator-max-microvolt = <2100000>;
182				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
183							   MT6360_OPMODE_LP>;
184				regulator-always-on;
185			};
186		};
187	};
188};
189
190&mmc0 {
191	status = "okay";
192	pinctrl-names = "default", "state_uhs";
193	pinctrl-0 = <&mmc0_default_pins>;
194	pinctrl-1 = <&mmc0_uhs_pins>;
195	bus-width = <8>;
196	max-frequency = <200000000>;
197	cap-mmc-highspeed;
198	mmc-hs200-1_8v;
199	mmc-hs400-1_8v;
200	cap-mmc-hw-reset;
201	no-sdio;
202	no-sd;
203	hs400-ds-delay = <0x14c11>;
204	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
205	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
206	non-removable;
207};
208
209&mmc1 {
210	pinctrl-names = "default", "state_uhs";
211	pinctrl-0 = <&mmc1_default_pins>;
212	pinctrl-1 = <&mmc1_uhs_pins>;
213	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
214	bus-width = <4>;
215	max-frequency = <200000000>;
216	cap-sd-highspeed;
217	sd-uhs-sdr50;
218	sd-uhs-sdr104;
219	vmmc-supply = <&mt6360_ldo5>;
220	vqmmc-supply = <&mt6360_ldo3>;
221	status = "okay";
222};
223
224&mt6359_vbbck_ldo_reg {
225	regulator-always-on;
226};
227
228&mt6359_vcore_buck_reg {
229	regulator-always-on;
230};
231
232&mt6359_vgpu11_buck_reg {
233	regulator-always-on;
234};
235
236&mt6359_vproc1_buck_reg {
237	regulator-always-on;
238};
239
240&mt6359_vproc2_buck_reg {
241	regulator-always-on;
242};
243
244&mt6359_vpu_buck_reg {
245	regulator-always-on;
246};
247
248&mt6359_vrf12_ldo_reg {
249	regulator-always-on;
250};
251
252&mt6359_vsram_md_ldo_reg {
253	regulator-always-on;
254};
255
256&mt6359_vsram_others_ldo_reg {
257	regulator-always-on;
258};
259
260&pio {
261	gpio_keys_pins: gpio-keys-pins {
262		pins {
263			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
264			input-enable;
265		};
266	};
267
268	i2c6_pins: i2c6-pins {
269		pins {
270			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
271				 <PINMUX_GPIO26__FUNC_SCL6>;
272			bias-pull-up;
273		};
274	};
275
276	mmc0_default_pins: mmc0-default-pins {
277		pins-clk {
278			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
279			drive-strength = <MTK_DRIVE_6mA>;
280			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
281		};
282
283		pins-cmd-dat {
284			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
285				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
286				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
287				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
288				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
289				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
290				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
291				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
292				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
293			input-enable;
294			drive-strength = <MTK_DRIVE_6mA>;
295			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
296		};
297
298		pins-rst {
299			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
300			drive-strength = <MTK_DRIVE_6mA>;
301			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
302		};
303	};
304
305	mmc0_uhs_pins: mmc0-uhs-pins {
306		pins-clk {
307			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
308			drive-strength = <MTK_DRIVE_8mA>;
309			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
310		};
311
312		pins-cmd-dat {
313			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
314				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
315				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
316				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
317				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
318				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
319				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
320				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
321				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
322			input-enable;
323			drive-strength = <MTK_DRIVE_8mA>;
324			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
325		};
326
327		pins-ds {
328			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
329			drive-strength = <MTK_DRIVE_8mA>;
330			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
331		};
332
333		pins-rst {
334			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
335			drive-strength = <MTK_DRIVE_8mA>;
336			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
337		};
338	};
339
340	mmc1_default_pins: mmc1-default-pins {
341		pins-clk {
342			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
343			drive-strength = <MTK_DRIVE_8mA>;
344			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
345		};
346
347		pins-cmd-dat {
348			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
349				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
350				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
351				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
352				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
353			input-enable;
354			drive-strength = <MTK_DRIVE_8mA>;
355			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
356		};
357
358		pins-insert {
359			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
360			bias-pull-up;
361		};
362	};
363
364	mmc1_uhs_pins: mmc1-uhs-pins {
365		pins-clk {
366			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
367			drive-strength = <MTK_DRIVE_8mA>;
368			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
369		};
370
371		pins-cmd-dat {
372			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
373				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
374				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
375				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
376				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
377			input-enable;
378			drive-strength = <MTK_DRIVE_8mA>;
379			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
380		};
381	};
382
383	uart0_pins: uart0-pins {
384		pins {
385			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
386				 <PINMUX_GPIO99__FUNC_URXD0>;
387		};
388	};
389
390	uart1_pins: uart1-pins {
391		pins {
392			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
393				 <PINMUX_GPIO103__FUNC_URXD1>;
394		};
395	};
396};
397
398
399&pmic {
400	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
401};
402
403&uart0 {
404	pinctrl-names = "default";
405	pinctrl-0 = <&uart0_pins>;
406	status = "okay";
407};
408
409&uart1 {
410	pinctrl-names = "default";
411	pinctrl-0 = <&uart1_pins>;
412	status = "okay";
413};
414
415&u3phy0 {
416	status = "okay";
417};
418
419&u3phy1 {
420	status = "okay";
421};
422
423&u3phy2 {
424	status = "okay";
425};
426
427&u3phy3 {
428	status = "okay";
429};
430
431&xhci0 {
432	vusb33-supply = <&mt6359_vusb_ldo_reg>;
433	vbus-supply = <&otg_vbus_regulator>;
434	status = "okay";
435};
436
437&xhci1 {
438	vusb33-supply = <&mt6359_vusb_ldo_reg>;
439	status = "okay";
440};
441
442&xhci2 {
443	vusb33-supply = <&mt6359_vusb_ldo_reg>;
444	status = "okay";
445};
446
447&xhci3 {
448	vusb33-supply = <&mt6359_vusb_ldo_reg>;
449	status = "okay";
450};
451