xref: /freebsd/sys/contrib/device-tree/src/arm64/mediatek/mt8192-asurada.dtsi (revision e6bfd18d21b225af6a0ed67ceeaf1293b7b9eba5)
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright (C) 2020 MediaTek Inc.
4 * Author: Seiya Wang <seiya.wang@mediatek.com>
5 */
6/dts-v1/;
7#include "mt8192.dtsi"
8#include "mt6359.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/spmi/spmi.h>
11
12/ {
13	aliases {
14		serial0 = &uart0;
15	};
16
17	chosen {
18		stdout-path = "serial0:115200n8";
19	};
20
21	memory@40000000 {
22		device_type = "memory";
23		reg = <0 0x40000000 0 0x80000000>;
24	};
25
26	/* system wide LDO 1.8V power rail */
27	pp1800_ldo_g: regulator-1v8-g {
28		compatible = "regulator-fixed";
29		regulator-name = "pp1800_ldo_g";
30		regulator-always-on;
31		regulator-boot-on;
32		regulator-min-microvolt = <1800000>;
33		regulator-max-microvolt = <1800000>;
34		vin-supply = <&pp3300_g>;
35	};
36
37	/* system wide switching 3.3V power rail */
38	pp3300_g: regulator-3v3-g {
39		compatible = "regulator-fixed";
40		regulator-name = "pp3300_g";
41		regulator-always-on;
42		regulator-boot-on;
43		regulator-min-microvolt = <3300000>;
44		regulator-max-microvolt = <3300000>;
45		vin-supply = <&ppvar_sys>;
46	};
47
48	/* system wide LDO 3.3V power rail */
49	pp3300_ldo_z: regulator-3v3-z {
50		compatible = "regulator-fixed";
51		regulator-name = "pp3300_ldo_z";
52		regulator-always-on;
53		regulator-boot-on;
54		regulator-min-microvolt = <3300000>;
55		regulator-max-microvolt = <3300000>;
56		vin-supply = <&ppvar_sys>;
57	};
58
59	/* separately switched 3.3V power rail */
60	pp3300_u: regulator-3v3-u {
61		compatible = "regulator-fixed";
62		regulator-name = "pp3300_u";
63		regulator-always-on;
64		regulator-boot-on;
65		regulator-min-microvolt = <3300000>;
66		regulator-max-microvolt = <3300000>;
67		/* enable pin wired to GPIO controlled by EC */
68		vin-supply = <&pp3300_g>;
69	};
70
71	pp3300_wlan: regulator-3v3-wlan {
72		compatible = "regulator-fixed";
73		regulator-name = "pp3300_wlan";
74		regulator-always-on;
75		regulator-boot-on;
76		regulator-min-microvolt = <3300000>;
77		regulator-max-microvolt = <3300000>;
78		pinctrl-names = "default";
79		pinctrl-0 = <&pp3300_wlan_pins>;
80		enable-active-high;
81		gpio = <&pio 143 GPIO_ACTIVE_HIGH>;
82	};
83
84	/* system wide switching 5.0V power rail */
85	pp5000_a: regulator-5v0-a {
86		compatible = "regulator-fixed";
87		regulator-name = "pp5000_a";
88		regulator-always-on;
89		regulator-boot-on;
90		regulator-min-microvolt = <5000000>;
91		regulator-max-microvolt = <5000000>;
92		vin-supply = <&ppvar_sys>;
93	};
94
95	/* system wide semi-regulated power rail from battery or USB */
96	ppvar_sys: regulator-var-sys {
97		compatible = "regulator-fixed";
98		regulator-name = "ppvar_sys";
99		regulator-always-on;
100		regulator-boot-on;
101	};
102
103	reserved_memory: reserved-memory {
104		#address-cells = <2>;
105		#size-cells = <2>;
106		ranges;
107
108		scp_mem_reserved: scp@50000000 {
109			compatible = "shared-dma-pool";
110			reg = <0 0x50000000 0 0x2900000>;
111			no-map;
112		};
113
114		wifi_restricted_dma_region: wifi@c0000000 {
115			compatible = "restricted-dma-pool";
116			reg = <0 0xc0000000 0 0x4000000>;
117		};
118	};
119};
120
121&i2c0 {
122	status = "okay";
123
124	clock-frequency = <400000>;
125	pinctrl-names = "default";
126	pinctrl-0 = <&i2c0_pins>;
127
128	touchscreen: touchscreen@10 {
129		reg = <0x10>;
130		interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
131		pinctrl-names = "default";
132		pinctrl-0 = <&touchscreen_pins>;
133	};
134};
135
136&i2c1 {
137	status = "okay";
138
139	clock-frequency = <400000>;
140	pinctrl-names = "default";
141	pinctrl-0 = <&i2c1_pins>;
142};
143
144&i2c2 {
145	status = "okay";
146
147	clock-frequency = <400000>;
148	clock-stretch-ns = <12600>;
149	pinctrl-names = "default";
150	pinctrl-0 = <&i2c2_pins>;
151
152	trackpad@15 {
153		compatible = "elan,ekth3000";
154		reg = <0x15>;
155		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
156		pinctrl-names = "default";
157		pinctrl-0 = <&trackpad_pins>;
158		vcc-supply = <&pp3300_u>;
159		wakeup-source;
160	};
161};
162
163&i2c3 {
164	status = "okay";
165
166	clock-frequency = <400000>;
167	pinctrl-names = "default";
168	pinctrl-0 = <&i2c3_pins>;
169};
170
171&i2c7 {
172	status = "okay";
173
174	clock-frequency = <400000>;
175	pinctrl-names = "default";
176	pinctrl-0 = <&i2c7_pins>;
177};
178
179&mmc0 {
180	status = "okay";
181
182	pinctrl-names = "default", "state_uhs";
183	pinctrl-0 = <&mmc0_default_pins>;
184	pinctrl-1 = <&mmc0_uhs_pins>;
185	bus-width = <8>;
186	max-frequency = <200000000>;
187	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
188	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
189	cap-mmc-highspeed;
190	mmc-hs200-1_8v;
191	mmc-hs400-1_8v;
192	supports-cqe;
193	cap-mmc-hw-reset;
194	mmc-hs400-enhanced-strobe;
195	hs400-ds-delay = <0x12814>;
196	no-sdio;
197	no-sd;
198	non-removable;
199};
200
201&mmc1 {
202	status = "okay";
203
204	pinctrl-names = "default", "state_uhs";
205	pinctrl-0 = <&mmc1_default_pins>;
206	pinctrl-1 = <&mmc1_uhs_pins>;
207	bus-width = <4>;
208	max-frequency = <200000000>;
209	cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>;
210	vmmc-supply = <&mt6360_ldo5_reg>;
211	vqmmc-supply = <&mt6360_ldo3_reg>;
212	cap-sd-highspeed;
213	sd-uhs-sdr50;
214	sd-uhs-sdr104;
215	no-sdio;
216	no-mmc;
217};
218
219/* for CORE */
220&mt6359_vgpu11_buck_reg {
221	regulator-always-on;
222};
223
224&mt6359_vgpu11_sshub_buck_reg {
225	regulator-always-on;
226	regulator-min-microvolt = <575000>;
227	regulator-max-microvolt = <575000>;
228};
229
230&mt6359_vrf12_ldo_reg {
231	regulator-always-on;
232};
233
234&mt6359_vufs_ldo_reg {
235	regulator-always-on;
236};
237
238&mt6359codec {
239	mediatek,dmic-mode = <1>; /* one-wire */
240	mediatek,mic-type-0 = <2>; /* DMIC */
241	mediatek,mic-type-2 = <2>; /* DMIC */
242};
243
244&nor_flash {
245	status = "okay";
246
247	pinctrl-names = "default";
248	pinctrl-0 = <&nor_flash_pins>;
249	assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
250	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>;
251
252	flash@0 {
253		compatible = "winbond,w25q64jwm", "jedec,spi-nor";
254		reg = <0>;
255		spi-max-frequency = <52000000>;
256		spi-rx-bus-width = <2>;
257		spi-tx-bus-width = <2>;
258	};
259};
260
261&pcie {
262	pinctrl-names = "default";
263	pinctrl-0 = <&pcie_pins>;
264
265	pcie0: pcie@0,0 {
266		device_type = "pci";
267		reg = <0x0000 0 0 0 0>;
268		num-lanes = <1>;
269		bus-range = <0x1 0x1>;
270
271		#address-cells = <3>;
272		#size-cells = <2>;
273		ranges;
274
275		wifi: wifi@0,0 {
276			reg = <0x10000 0 0 0 0x100000>,
277			      <0x10000 0 0x100000 0 0x100000>;
278			memory-region = <&wifi_restricted_dma_region>;
279		};
280	};
281};
282
283&pio {
284	/* 220 lines */
285	gpio-line-names = "I2S_DP_LRCK",
286			  "IS_DP_BCLK",
287			  "I2S_DP_MCLK",
288			  "I2S_DP_DATAOUT",
289			  "SAR0_INT_ODL",
290			  "EC_AP_INT_ODL",
291			  "EDPBRDG_INT_ODL",
292			  "DPBRDG_INT_ODL",
293			  "DPBRDG_PWREN",
294			  "DPBRDG_RST_ODL",
295			  "I2S_HP_MCLK",
296			  "I2S_HP_BCK",
297			  "I2S_HP_LRCK",
298			  "I2S_HP_DATAIN",
299			  /*
300			   * AP_FLASH_WP_L is crossystem ABI. Schematics
301			   * call it AP_FLASH_WP_ODL.
302			   */
303			  "AP_FLASH_WP_L",
304			  "TRACKPAD_INT_ODL",
305			  "EC_AP_HPD_OD",
306			  "SD_CD_ODL",
307			  "HP_INT_ODL_ALC",
308			  "EN_PP1000_DPBRDG",
309			  "AP_GPIO20",
310			  "TOUCH_INT_L_1V8",
311			  "UART_BT_WAKE_ODL",
312			  "AP_GPIO23",
313			  "AP_SPI_FLASH_CS_L",
314			  "AP_SPI_FLASH_CLK",
315			  "EN_PP3300_DPBRDG_DX",
316			  "AP_SPI_FLASH_MOSI",
317			  "AP_SPI_FLASH_MISO",
318			  "I2S_HP_DATAOUT",
319			  "AP_GPIO30",
320			  "I2S_SPKR_MCLK",
321			  "I2S_SPKR_BCLK",
322			  "I2S_SPKR_LRCK",
323			  "I2S_SPKR_DATAIN",
324			  "I2S_SPKR_DATAOUT",
325			  "AP_SPI_H1_TPM_CLK",
326			  "AP_SPI_H1_TPM_CS_L",
327			  "AP_SPI_H1_TPM_MISO",
328			  "AP_SPI_H1_TPM_MOSI",
329			  "BL_PWM",
330			  "EDPBRDG_PWREN",
331			  "EDPBRDG_RST_ODL",
332			  "EN_PP3300_HUB",
333			  "HUB_RST_L",
334			  "",
335			  "",
336			  "",
337			  "",
338			  "",
339			  "",
340			  "SD_CLK",
341			  "SD_CMD",
342			  "SD_DATA3",
343			  "SD_DATA0",
344			  "SD_DATA2",
345			  "SD_DATA1",
346			  "",
347			  "",
348			  "",
349			  "",
350			  "",
351			  "",
352			  "PCIE_WAKE_ODL",
353			  "PCIE_RST_L",
354			  "PCIE_CLKREQ_ODL",
355			  "",
356			  "",
357			  "",
358			  "",
359			  "",
360			  "",
361			  "",
362			  "",
363			  "",
364			  "",
365			  "",
366			  "",
367			  "",
368			  "",
369			  "",
370			  "",
371			  "",
372			  "",
373			  "",
374			  "",
375			  "",
376			  "",
377			  "",
378			  "SPMI_SCL",
379			  "SPMI_SDA",
380			  "AP_GOOD",
381			  "UART_DBG_TX_AP_RX",
382			  "UART_AP_TX_DBG_RX",
383			  "UART_AP_TX_BT_RX",
384			  "UART_BT_TX_AP_RX",
385			  "MIPI_DPI_D0_R",
386			  "MIPI_DPI_D1_R",
387			  "MIPI_DPI_D2_R",
388			  "MIPI_DPI_D3_R",
389			  "MIPI_DPI_D4_R",
390			  "MIPI_DPI_D5_R",
391			  "MIPI_DPI_D6_R",
392			  "MIPI_DPI_D7_R",
393			  "MIPI_DPI_D8_R",
394			  "MIPI_DPI_D9_R",
395			  "MIPI_DPI_D10_R",
396			  "",
397			  "",
398			  "MIPI_DPI_DE_R",
399			  "MIPI_DPI_D11_R",
400			  "MIPI_DPI_VSYNC_R",
401			  "MIPI_DPI_CLK_R",
402			  "MIPI_DPI_HSYNC_R",
403			  "PCM_BT_DATAIN",
404			  "PCM_BT_SYNC",
405			  "PCM_BT_DATAOUT",
406			  "PCM_BT_CLK",
407			  "AP_I2C_AUDIO_SCL",
408			  "AP_I2C_AUDIO_SDA",
409			  "SCP_I2C_SCL",
410			  "SCP_I2C_SDA",
411			  "AP_I2C_WLAN_SCL",
412			  "AP_I2C_WLAN_SDA",
413			  "AP_I2C_DPBRDG_SCL",
414			  "AP_I2C_DPBRDG_SDA",
415			  "EN_PP1800_DPBRDG_DX",
416			  "EN_PP3300_EDP_DX",
417			  "EN_PP1800_EDPBRDG_DX",
418			  "EN_PP1000_EDPBRDG",
419			  "SCP_JTAG0_TDO",
420			  "SCP_JTAG0_TDI",
421			  "SCP_JTAG0_TMS",
422			  "SCP_JTAG0_TCK",
423			  "SCP_JTAG0_TRSTN",
424			  "EN_PP3000_VMC_PMU",
425			  "EN_PP3300_DISPLAY_DX",
426			  "TOUCH_RST_L_1V8",
427			  "TOUCH_REPORT_DISABLE",
428			  "",
429			  "",
430			  "AP_I2C_TRACKPAD_SCL_1V8",
431			  "AP_I2C_TRACKPAD_SDA_1V8",
432			  "EN_PP3300_WLAN",
433			  "BT_KILL_L",
434			  "WIFI_KILL_L",
435			  "SET_VMC_VOLT_AT_1V8",
436			  "EN_SPK",
437			  "AP_WARM_RST_REQ",
438			  "",
439			  "",
440			  "EN_PP3000_SD_S3",
441			  "AP_EDP_BKLTEN",
442			  "",
443			  "",
444			  "",
445			  "AP_SPI_EC_CLK",
446			  "AP_SPI_EC_CS_L",
447			  "AP_SPI_EC_MISO",
448			  "AP_SPI_EC_MOSI",
449			  "AP_I2C_EDPBRDG_SCL",
450			  "AP_I2C_EDPBRDG_SDA",
451			  "MT6315_PROC_INT",
452			  "MT6315_GPU_INT",
453			  "UART_SERVO_TX_SCP_RX",
454			  "UART_SCP_TX_SERVO_RX",
455			  "BT_RTS_AP_CTS",
456			  "AP_RTS_BT_CTS",
457			  "UART_AP_WAKE_BT_ODL",
458			  "WLAN_ALERT_ODL",
459			  "EC_IN_RW_ODL",
460			  "H1_AP_INT_ODL",
461			  "",
462			  "",
463			  "",
464			  "",
465			  "",
466			  "",
467			  "",
468			  "",
469			  "",
470			  "",
471			  "",
472			  "MSDC0_CMD",
473			  "MSDC0_DAT0",
474			  "MSDC0_DAT2",
475			  "MSDC0_DAT4",
476			  "MSDC0_DAT6",
477			  "MSDC0_DAT1",
478			  "MSDC0_DAT5",
479			  "MSDC0_DAT7",
480			  "MSDC0_DSL",
481			  "MSDC0_CLK",
482			  "MSDC0_DAT3",
483			  "MSDC0_RST_L",
484			  "SCP_VREQ_VAO",
485			  "AUD_DAT_MOSI2",
486			  "AUD_NLE_MOSI1",
487			  "AUD_NLE_MOSI0",
488			  "AUD_DAT_MISO2",
489			  "AP_I2C_SAR_SDA",
490			  "AP_I2C_SAR_SCL",
491			  "AP_I2C_PWR_SCL",
492			  "AP_I2C_PWR_SDA",
493			  "AP_I2C_TS_SCL_1V8",
494			  "AP_I2C_TS_SDA_1V8",
495			  "SRCLKENA0",
496			  "SRCLKENA1",
497			  "AP_EC_WATCHDOG_L",
498			  "PWRAP_SPI0_MI",
499			  "PWRAP_SPI0_CSN",
500			  "PWRAP_SPI0_MO",
501			  "PWRAP_SPI0_CK",
502			  "AP_RTC_CLK32K",
503			  "AUD_CLK_MOSI",
504			  "AUD_SYNC_MOSI",
505			  "AUD_DAT_MOSI0",
506			  "AUD_DAT_MOSI1",
507			  "AUD_DAT_MISO0",
508			  "AUD_DAT_MISO1";
509
510	cr50_int: cr50-irq-default-pins {
511		pins-gsc-ap-int-odl {
512			pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
513			input-enable;
514		};
515	};
516
517	cros_ec_int: cros-ec-irq-default-pins {
518		pins-ec-ap-int-odl {
519			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
520			input-enable;
521			bias-pull-up;
522		};
523	};
524
525	i2c0_pins: i2c0-default-pins {
526		pins-bus {
527			pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
528				 <PINMUX_GPIO205__FUNC_SDA0>;
529			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
530			drive-strength-microamp = <1000>;
531		};
532	};
533
534	i2c1_pins: i2c1-default-pins {
535		pins-bus {
536			pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
537				 <PINMUX_GPIO119__FUNC_SDA1>;
538			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
539			drive-strength-microamp = <1000>;
540		};
541	};
542
543	i2c2_pins: i2c2-default-pins {
544		pins-bus {
545			pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
546				 <PINMUX_GPIO142__FUNC_SDA2>;
547			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
548		};
549	};
550
551	i2c3_pins: i2c3-default-pins {
552		pins-bus {
553			pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
554				 <PINMUX_GPIO161__FUNC_SDA3>;
555			bias-disable;
556			drive-strength-microamp = <1000>;
557		};
558	};
559
560	i2c7_pins: i2c7-default-pins {
561		pins-bus {
562			pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
563				 <PINMUX_GPIO125__FUNC_SDA7>;
564			bias-disable;
565			drive-strength-microamp = <1000>;
566		};
567	};
568
569	mmc0_default_pins: mmc0-default-pins {
570		pins-cmd-dat {
571			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
572				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
573				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
574				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
575				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
576				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
577				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
578				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
579				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
580			input-enable;
581			drive-strength = <8>;
582			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
583		};
584
585		pins-clk {
586			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
587			drive-strength = <8>;
588			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
589		};
590
591		pins-rst {
592			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
593			drive-strength = <8>;
594			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
595		};
596	};
597
598	mmc0_uhs_pins: mmc0-uhs-pins {
599		pins-cmd-dat {
600			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
601				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
602				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
603				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
604				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
605				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
606				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
607				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
608				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
609			input-enable;
610			drive-strength = <10>;
611			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
612		};
613
614		pins-clk {
615			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
616			drive-strength = <10>;
617			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
618		};
619
620		pins-rst {
621			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
622			drive-strength = <8>;
623			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
624		};
625
626		pins-ds {
627			pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
628			drive-strength = <10>;
629			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
630		};
631	};
632
633	mmc1_default_pins: mmc1-default-pins {
634		pins-cmd-dat {
635			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
636				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
637				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
638				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
639				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
640			input-enable;
641			drive-strength = <8>;
642			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
643		};
644
645		pins-clk {
646			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
647			drive-strength = <8>;
648			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
649		};
650
651		pins-insert {
652			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
653			input-enable;
654			bias-pull-up;
655		};
656	};
657
658	mmc1_uhs_pins: mmc1-uhs-pins {
659		pins-cmd-dat {
660			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
661				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
662				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
663				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
664				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
665			input-enable;
666			drive-strength = <8>;
667			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
668		};
669
670		pins-clk {
671			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
672			input-enable;
673			drive-strength = <8>;
674			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
675		};
676	};
677
678	nor_flash_pins: nor-flash-default-pins {
679		pins-cs-io1 {
680			pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>,
681				 <PINMUX_GPIO28__FUNC_SPINOR_IO1>;
682			input-enable;
683			bias-pull-up;
684			drive-strength = <10>;
685		};
686
687		pins-io0 {
688			pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>;
689			bias-pull-up;
690			drive-strength = <10>;
691		};
692
693		pins-clk {
694			pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>;
695			input-enable;
696			bias-pull-up;
697			drive-strength = <10>;
698		};
699	};
700
701	pcie_pins: pcie-default-pins {
702		pins-pcie-wake {
703			pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>;
704			bias-pull-up;
705		};
706
707		pins-pcie-pereset {
708			pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>;
709		};
710
711		pins-pcie-clkreq {
712			pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>;
713			bias-pull-up;
714		};
715
716		pins-wifi-kill {
717			pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */
718			output-high;
719		};
720	};
721
722	pp3300_wlan_pins: pp3300-wlan-pins {
723		pins-pcie-en-pp3300-wlan {
724			pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
725			output-high;
726		};
727	};
728
729	scp_pins: scp-pins {
730		pins-vreq-vao {
731			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
732		};
733	};
734
735	spi1_pins: spi1-default-pins {
736		pins-cs-mosi-clk {
737			pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
738				 <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
739				 <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
740			bias-disable;
741		};
742
743		pins-miso {
744			pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
745			bias-pull-down;
746		};
747	};
748
749	spi5_pins: spi5-default-pins {
750		pins-bus {
751			pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
752				 <PINMUX_GPIO37__FUNC_GPIO37>,
753				 <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
754				 <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
755			bias-disable;
756		};
757	};
758
759	trackpad_pins: trackpad-default-pins {
760		pins-int-n {
761			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
762			input-enable;
763			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
764		};
765	};
766
767	touchscreen_pins: touchscreen-default-pins {
768		pins-irq {
769			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
770			input-enable;
771			bias-pull-up;
772		};
773
774		pins-reset {
775			pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
776			output-high;
777		};
778
779		pins-report-sw {
780			pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
781			output-low;
782		};
783	};
784};
785
786&pmic {
787	interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>;
788};
789
790&scp {
791	status = "okay";
792
793	firmware-name = "mediatek/mt8192/scp.img";
794	memory-region = <&scp_mem_reserved>;
795	pinctrl-names = "default";
796	pinctrl-0 = <&scp_pins>;
797
798	cros-ec {
799		compatible = "google,cros-ec-rpmsg";
800		mediatek,rpmsg-name = "cros-ec-rpmsg";
801	};
802};
803
804&spi1 {
805	status = "okay";
806
807	mediatek,pad-select = <0>;
808	pinctrl-names = "default";
809	pinctrl-0 = <&spi1_pins>;
810
811	cros_ec: ec@0 {
812		compatible = "google,cros-ec-spi";
813		reg = <0>;
814		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
815		spi-max-frequency = <3000000>;
816		pinctrl-names = "default";
817		pinctrl-0 = <&cros_ec_int>;
818
819		#address-cells = <1>;
820		#size-cells = <0>;
821
822		base_detection: cbas {
823			compatible = "google,cros-cbas";
824		};
825
826		cros_ec_pwm: pwm {
827			compatible = "google,cros-ec-pwm";
828			#pwm-cells = <1>;
829
830			status = "disabled";
831		};
832
833		i2c_tunnel: i2c-tunnel {
834			compatible = "google,cros-ec-i2c-tunnel";
835			google,remote-bus = <0>;
836			#address-cells = <1>;
837			#size-cells = <0>;
838		};
839
840		mt6360_ldo3_reg: regulator@0 {
841			compatible = "google,cros-ec-regulator";
842			reg = <0>;
843			regulator-min-microvolt = <1800000>;
844			regulator-max-microvolt = <3300000>;
845		};
846
847		mt6360_ldo5_reg: regulator@1 {
848			compatible = "google,cros-ec-regulator";
849			reg = <1>;
850			regulator-min-microvolt = <3300000>;
851			regulator-max-microvolt = <3300000>;
852		};
853
854		typec {
855			compatible = "google,cros-ec-typec";
856			#address-cells = <1>;
857			#size-cells = <0>;
858
859			usb_c0: connector@0 {
860				compatible = "usb-c-connector";
861				reg = <0>;
862				label = "left";
863				power-role = "dual";
864				data-role = "host";
865				try-power-role = "source";
866			};
867
868			usb_c1: connector@1 {
869				compatible = "usb-c-connector";
870				reg = <1>;
871				label = "right";
872				power-role = "dual";
873				data-role = "host";
874				try-power-role = "source";
875			};
876		};
877	};
878};
879
880&spi5 {
881	status = "okay";
882
883	cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
884	mediatek,pad-select = <0>;
885	pinctrl-names = "default";
886	pinctrl-0 = <&spi5_pins>;
887
888	cr50@0 {
889		compatible = "google,cr50";
890		reg = <0>;
891		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
892		spi-max-frequency = <1000000>;
893		pinctrl-names = "default";
894		pinctrl-0 = <&cr50_int>;
895	};
896};
897
898&spmi {
899	#address-cells = <2>;
900	#size-cells = <0>;
901
902	mt6315_6: pmic@6 {
903		compatible = "mediatek,mt6315-regulator";
904		reg = <0x6 SPMI_USID>;
905
906		regulators {
907			mt6315_6_vbuck1: vbuck1 {
908				regulator-compatible = "vbuck1";
909				regulator-name = "Vbcpu";
910				regulator-min-microvolt = <300000>;
911				regulator-max-microvolt = <1193750>;
912				regulator-enable-ramp-delay = <256>;
913				regulator-allowed-modes = <0 1 2>;
914				regulator-always-on;
915			};
916
917			mt6315_6_vbuck3: vbuck3 {
918				regulator-compatible = "vbuck3";
919				regulator-name = "Vlcpu";
920				regulator-min-microvolt = <300000>;
921				regulator-max-microvolt = <1193750>;
922				regulator-enable-ramp-delay = <256>;
923				regulator-allowed-modes = <0 1 2>;
924				regulator-always-on;
925			};
926		};
927	};
928
929	mt6315_7: pmic@7 {
930		compatible = "mediatek,mt6315-regulator";
931		reg = <0x7 SPMI_USID>;
932
933		regulators {
934			mt6315_7_vbuck1: vbuck1 {
935				regulator-compatible = "vbuck1";
936				regulator-name = "Vgpu";
937				regulator-min-microvolt = <606250>;
938				regulator-max-microvolt = <1193750>;
939				regulator-enable-ramp-delay = <256>;
940				regulator-allowed-modes = <0 1 2>;
941			};
942		};
943	};
944};
945
946&uart0 {
947	status = "okay";
948};
949
950&xhci {
951	status = "okay";
952
953	wakeup-source;
954	vusb33-supply = <&pp3300_g>;
955	vbus-supply = <&pp5000_a>;
956};
957
958#include <arm/cros-ec-keyboard.dtsi>
959#include <arm/cros-ec-sbs.dtsi>
960