xref: /freebsd/sys/contrib/device-tree/src/arm64/mediatek/mt8192-asurada.dtsi (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright (C) 2020 MediaTek Inc.
4 * Author: Seiya Wang <seiya.wang@mediatek.com>
5 */
6/dts-v1/;
7#include "mt8192.dtsi"
8#include "mt6359.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/spmi/spmi.h>
11
12/ {
13	aliases {
14		i2c0 = &i2c0;
15		i2c1 = &i2c1;
16		i2c2 = &i2c2;
17		i2c3 = &i2c3;
18		i2c7 = &i2c7;
19		mmc0 = &mmc0;
20		mmc1 = &mmc1;
21		serial0 = &uart0;
22	};
23
24	chosen {
25		stdout-path = "serial0:115200n8";
26	};
27
28	memory@40000000 {
29		device_type = "memory";
30		reg = <0 0x40000000 0 0x80000000>;
31	};
32
33	backlight_lcd0: backlight-lcd0 {
34		compatible = "pwm-backlight";
35		pwms = <&pwm0 0 500000>;
36		power-supply = <&ppvar_sys>;
37		enable-gpios = <&pio 152 0>;
38		brightness-levels = <0 1023>;
39		num-interpolated-steps = <1023>;
40		default-brightness-level = <576>;
41	};
42
43	dmic_codec: dmic-codec {
44		compatible = "dmic-codec";
45		num-channels = <2>;
46		wakeup-delay-ms = <50>;
47	};
48
49	pp1000_dpbrdg: regulator-1v0-dpbrdg {
50		compatible = "regulator-fixed";
51		regulator-name = "pp1000_dpbrdg";
52		pinctrl-names = "default";
53		pinctrl-0 = <&pp1000_dpbrdg_en_pins>;
54		regulator-min-microvolt = <1000000>;
55		regulator-max-microvolt = <1000000>;
56		enable-active-high;
57		regulator-boot-on;
58		gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
59		vin-supply = <&mt6359_vs2_buck_reg>;
60	};
61
62	pp1000_mipibrdg: regulator-1v0-mipibrdg {
63		compatible = "regulator-fixed";
64		regulator-name = "pp1000_mipibrdg";
65		pinctrl-names = "default";
66		pinctrl-0 = <&pp1000_mipibrdg_en_pins>;
67		regulator-min-microvolt = <1000000>;
68		regulator-max-microvolt = <1000000>;
69		enable-active-high;
70		regulator-boot-on;
71		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
72		vin-supply = <&mt6359_vs2_buck_reg>;
73	};
74
75	pp1800_dpbrdg: regulator-1v8-dpbrdg {
76		compatible = "regulator-fixed";
77		regulator-name = "pp1800_dpbrdg";
78		pinctrl-names = "default";
79		pinctrl-0 = <&pp1800_dpbrdg_en_pins>;
80		enable-active-high;
81		regulator-boot-on;
82		gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
83		vin-supply = <&mt6359_vio18_ldo_reg>;
84	};
85
86	/* system wide LDO 1.8V power rail */
87	pp1800_ldo_g: regulator-1v8-g {
88		compatible = "regulator-fixed";
89		regulator-name = "pp1800_ldo_g";
90		regulator-always-on;
91		regulator-boot-on;
92		regulator-min-microvolt = <1800000>;
93		regulator-max-microvolt = <1800000>;
94		vin-supply = <&pp3300_g>;
95	};
96
97	pp1800_mipibrdg: regulator-1v8-mipibrdg {
98		compatible = "regulator-fixed";
99		regulator-name = "pp1800_mipibrdg";
100		pinctrl-names = "default";
101		pinctrl-0 = <&pp1800_mipibrdg_en_pins>;
102		enable-active-high;
103		regulator-boot-on;
104		gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
105		vin-supply = <&mt6359_vio18_ldo_reg>;
106	};
107
108	pp3300_dpbrdg: regulator-3v3-dpbrdg {
109		compatible = "regulator-fixed";
110		regulator-name = "pp3300_dpbrdg";
111		pinctrl-names = "default";
112		pinctrl-0 = <&pp3300_dpbrdg_en_pins>;
113		enable-active-high;
114		regulator-boot-on;
115		gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
116		vin-supply = <&pp3300_g>;
117	};
118
119	/* system wide switching 3.3V power rail */
120	pp3300_g: regulator-3v3-g {
121		compatible = "regulator-fixed";
122		regulator-name = "pp3300_g";
123		regulator-always-on;
124		regulator-boot-on;
125		regulator-min-microvolt = <3300000>;
126		regulator-max-microvolt = <3300000>;
127		vin-supply = <&ppvar_sys>;
128	};
129
130	/* system wide LDO 3.3V power rail */
131	pp3300_ldo_z: regulator-3v3-z {
132		compatible = "regulator-fixed";
133		regulator-name = "pp3300_ldo_z";
134		regulator-always-on;
135		regulator-boot-on;
136		regulator-min-microvolt = <3300000>;
137		regulator-max-microvolt = <3300000>;
138		vin-supply = <&ppvar_sys>;
139	};
140
141	pp3300_mipibrdg: regulator-3v3-mipibrdg {
142		compatible = "regulator-fixed";
143		regulator-name = "pp3300_mipibrdg";
144		pinctrl-names = "default";
145		pinctrl-0 = <&pp3300_mipibrdg_en_pins>;
146		enable-active-high;
147		regulator-boot-on;
148		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
149		vin-supply = <&pp3300_g>;
150	};
151
152	/* separately switched 3.3V power rail */
153	pp3300_u: regulator-3v3-u {
154		compatible = "regulator-fixed";
155		regulator-name = "pp3300_u";
156		regulator-always-on;
157		regulator-boot-on;
158		regulator-min-microvolt = <3300000>;
159		regulator-max-microvolt = <3300000>;
160		/* enable pin wired to GPIO controlled by EC */
161		vin-supply = <&pp3300_g>;
162	};
163
164	pp3300_wlan: regulator-3v3-wlan {
165		compatible = "regulator-fixed";
166		regulator-name = "pp3300_wlan";
167		regulator-always-on;
168		regulator-boot-on;
169		regulator-min-microvolt = <3300000>;
170		regulator-max-microvolt = <3300000>;
171		pinctrl-names = "default";
172		pinctrl-0 = <&pp3300_wlan_pins>;
173		enable-active-high;
174		gpio = <&pio 143 GPIO_ACTIVE_HIGH>;
175	};
176
177	/* system wide switching 5.0V power rail */
178	pp5000_a: regulator-5v0-a {
179		compatible = "regulator-fixed";
180		regulator-name = "pp5000_a";
181		regulator-always-on;
182		regulator-boot-on;
183		regulator-min-microvolt = <5000000>;
184		regulator-max-microvolt = <5000000>;
185		vin-supply = <&ppvar_sys>;
186	};
187
188	/* system wide semi-regulated power rail from battery or USB */
189	ppvar_sys: regulator-var-sys {
190		compatible = "regulator-fixed";
191		regulator-name = "ppvar_sys";
192		regulator-always-on;
193		regulator-boot-on;
194	};
195
196	reserved_memory: reserved-memory {
197		#address-cells = <2>;
198		#size-cells = <2>;
199		ranges;
200
201		scp_mem_reserved: scp@50000000 {
202			compatible = "shared-dma-pool";
203			reg = <0 0x50000000 0 0x2900000>;
204			no-map;
205		};
206
207		wifi_restricted_dma_region: wifi@c0000000 {
208			compatible = "restricted-dma-pool";
209			reg = <0 0xc0000000 0 0x4000000>;
210		};
211	};
212
213	sound: sound {
214		mediatek,platform = <&afe>;
215		pinctrl-names = "aud_clk_mosi_off",
216				"aud_clk_mosi_on",
217				"aud_dat_mosi_off",
218				"aud_dat_mosi_on",
219				"aud_dat_miso_off",
220				"aud_dat_miso_on",
221				"vow_dat_miso_off",
222				"vow_dat_miso_on",
223				"vow_clk_miso_off",
224				"vow_clk_miso_on",
225				"aud_nle_mosi_off",
226				"aud_nle_mosi_on",
227				"aud_dat_miso2_off",
228				"aud_dat_miso2_on",
229				"aud_gpio_i2s3_off",
230				"aud_gpio_i2s3_on",
231				"aud_gpio_i2s8_off",
232				"aud_gpio_i2s8_on",
233				"aud_gpio_i2s9_off",
234				"aud_gpio_i2s9_on",
235				"aud_dat_mosi_ch34_off",
236				"aud_dat_mosi_ch34_on",
237				"aud_dat_miso_ch34_off",
238				"aud_dat_miso_ch34_on",
239				"aud_gpio_tdm_off",
240				"aud_gpio_tdm_on";
241		pinctrl-0 = <&aud_clk_mosi_off_pins>;
242		pinctrl-1 = <&aud_clk_mosi_on_pins>;
243		pinctrl-2 = <&aud_dat_mosi_off_pins>;
244		pinctrl-3 = <&aud_dat_mosi_on_pins>;
245		pinctrl-4 = <&aud_dat_miso_off_pins>;
246		pinctrl-5 = <&aud_dat_miso_on_pins>;
247		pinctrl-6 = <&vow_dat_miso_off_pins>;
248		pinctrl-7 = <&vow_dat_miso_on_pins>;
249		pinctrl-8 = <&vow_clk_miso_off_pins>;
250		pinctrl-9 = <&vow_clk_miso_on_pins>;
251		pinctrl-10 = <&aud_nle_mosi_off_pins>;
252		pinctrl-11 = <&aud_nle_mosi_on_pins>;
253		pinctrl-12 = <&aud_dat_miso2_off_pins>;
254		pinctrl-13 = <&aud_dat_miso2_on_pins>;
255		pinctrl-14 = <&aud_gpio_i2s3_off_pins>;
256		pinctrl-15 = <&aud_gpio_i2s3_on_pins>;
257		pinctrl-16 = <&aud_gpio_i2s8_off_pins>;
258		pinctrl-17 = <&aud_gpio_i2s8_on_pins>;
259		pinctrl-18 = <&aud_gpio_i2s9_off_pins>;
260		pinctrl-19 = <&aud_gpio_i2s9_on_pins>;
261		pinctrl-20 = <&aud_dat_mosi_ch34_off_pins>;
262		pinctrl-21 = <&aud_dat_mosi_ch34_on_pins>;
263		pinctrl-22 = <&aud_dat_miso_ch34_off_pins>;
264		pinctrl-23 = <&aud_dat_miso_ch34_on_pins>;
265		pinctrl-24 = <&aud_gpio_tdm_off_pins>;
266		pinctrl-25 = <&aud_gpio_tdm_on_pins>;
267	};
268};
269
270&dsi0 {
271	status = "okay";
272};
273
274&dsi_out {
275	remote-endpoint = <&anx7625_in>;
276};
277
278&gic {
279	mediatek,broken-save-restore-fw;
280};
281
282&gpu {
283	mali-supply = <&mt6315_7_vbuck1>;
284	status = "okay";
285};
286
287&i2c0 {
288	status = "okay";
289
290	clock-frequency = <400000>;
291	pinctrl-names = "default";
292	pinctrl-0 = <&i2c0_pins>;
293
294	touchscreen: touchscreen@10 {
295		reg = <0x10>;
296		interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
297		pinctrl-names = "default";
298		pinctrl-0 = <&touchscreen_pins>;
299	};
300};
301
302&i2c1 {
303	status = "okay";
304
305	clock-frequency = <400000>;
306	pinctrl-names = "default";
307	pinctrl-0 = <&i2c1_pins>;
308};
309
310&i2c2 {
311	status = "okay";
312
313	clock-frequency = <400000>;
314	clock-stretch-ns = <12600>;
315	pinctrl-names = "default";
316	pinctrl-0 = <&i2c2_pins>;
317
318	trackpad@15 {
319		compatible = "elan,ekth3000";
320		reg = <0x15>;
321		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
322		pinctrl-names = "default";
323		pinctrl-0 = <&trackpad_pins>;
324		vcc-supply = <&pp3300_u>;
325		wakeup-source;
326	};
327};
328
329&i2c3 {
330	status = "okay";
331
332	clock-frequency = <400000>;
333	pinctrl-names = "default";
334	pinctrl-0 = <&i2c3_pins>;
335
336	anx_bridge: anx7625@58 {
337		compatible = "analogix,anx7625";
338		reg = <0x58>;
339		pinctrl-names = "default";
340		pinctrl-0 = <&anx7625_pins>;
341		enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>;
342		reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
343		vdd10-supply = <&pp1000_mipibrdg>;
344		vdd18-supply = <&pp1800_mipibrdg>;
345		vdd33-supply = <&pp3300_mipibrdg>;
346
347		ports {
348			#address-cells = <1>;
349			#size-cells = <0>;
350
351			port@0 {
352				reg = <0>;
353
354				anx7625_in: endpoint {
355					remote-endpoint = <&dsi_out>;
356				};
357			};
358
359			port@1 {
360				reg = <1>;
361
362				anx7625_out: endpoint {
363					remote-endpoint = <&panel_in>;
364				};
365			};
366		};
367
368		aux-bus {
369			panel: panel {
370				compatible = "edp-panel";
371				power-supply = <&pp3300_mipibrdg>;
372				backlight = <&backlight_lcd0>;
373
374				port {
375					panel_in: endpoint {
376						remote-endpoint = <&anx7625_out>;
377					};
378				};
379			};
380		};
381	};
382};
383
384&i2c7 {
385	status = "okay";
386
387	clock-frequency = <400000>;
388	pinctrl-names = "default";
389	pinctrl-0 = <&i2c7_pins>;
390};
391
392&mfg0 {
393	domain-supply = <&mt6315_7_vbuck1>;
394};
395
396&mfg1 {
397	domain-supply = <&mt6359_vsram_others_ldo_reg>;
398};
399
400&mipi_tx0 {
401	status = "okay";
402};
403
404&mmc0 {
405	status = "okay";
406
407	pinctrl-names = "default", "state_uhs";
408	pinctrl-0 = <&mmc0_default_pins>;
409	pinctrl-1 = <&mmc0_uhs_pins>;
410	bus-width = <8>;
411	max-frequency = <200000000>;
412	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
413	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
414	cap-mmc-highspeed;
415	mmc-hs200-1_8v;
416	mmc-hs400-1_8v;
417	supports-cqe;
418	cap-mmc-hw-reset;
419	mmc-hs400-enhanced-strobe;
420	hs400-ds-delay = <0x12814>;
421	no-sdio;
422	no-sd;
423	non-removable;
424};
425
426&mmc1 {
427	status = "okay";
428
429	pinctrl-names = "default", "state_uhs";
430	pinctrl-0 = <&mmc1_default_pins>;
431	pinctrl-1 = <&mmc1_uhs_pins>;
432	bus-width = <4>;
433	max-frequency = <200000000>;
434	cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>;
435	vmmc-supply = <&mt6360_ldo5_reg>;
436	vqmmc-supply = <&mt6360_ldo3_reg>;
437	cap-sd-highspeed;
438	sd-uhs-sdr50;
439	sd-uhs-sdr104;
440	no-sdio;
441	no-mmc;
442};
443
444/* for CORE */
445&mt6359_vgpu11_buck_reg {
446	regulator-always-on;
447};
448
449&mt6359_vgpu11_sshub_buck_reg {
450	regulator-always-on;
451	regulator-min-microvolt = <575000>;
452	regulator-max-microvolt = <575000>;
453};
454
455&mt6359_vrf12_ldo_reg {
456	regulator-always-on;
457};
458
459&mt6359_vsram_others_ldo_reg {
460	regulator-min-microvolt = <750000>;
461	regulator-max-microvolt = <800000>;
462	regulator-coupled-with = <&mt6315_7_vbuck1>;
463	regulator-coupled-max-spread = <10000>;
464};
465
466&mt6359_vufs_ldo_reg {
467	regulator-always-on;
468};
469
470&mt6359codec {
471	mediatek,dmic-mode = <1>; /* one-wire */
472	mediatek,mic-type-0 = <2>; /* DMIC */
473	mediatek,mic-type-2 = <2>; /* DMIC */
474};
475
476&nor_flash {
477	status = "okay";
478
479	pinctrl-names = "default";
480	pinctrl-0 = <&nor_flash_pins>;
481	assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
482	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>;
483
484	flash@0 {
485		compatible = "winbond,w25q64jwm", "jedec,spi-nor";
486		reg = <0>;
487		spi-max-frequency = <52000000>;
488		spi-rx-bus-width = <2>;
489		spi-tx-bus-width = <2>;
490	};
491};
492
493&pcie {
494	pinctrl-names = "default";
495	pinctrl-0 = <&pcie_pins>;
496
497	pcie0: pcie@0,0 {
498		device_type = "pci";
499		reg = <0x0000 0 0 0 0>;
500		num-lanes = <1>;
501		bus-range = <0x1 0x1>;
502
503		#address-cells = <3>;
504		#size-cells = <2>;
505		ranges;
506
507		wifi: wifi@0,0 {
508			reg = <0x10000 0 0 0 0x100000>,
509			      <0x10000 0 0x100000 0 0x100000>;
510			memory-region = <&wifi_restricted_dma_region>;
511		};
512	};
513};
514
515&pio {
516	/* 220 lines */
517	gpio-line-names = "I2S_DP_LRCK",
518			  "IS_DP_BCLK",
519			  "I2S_DP_MCLK",
520			  "I2S_DP_DATAOUT",
521			  "SAR0_INT_ODL",
522			  "EC_AP_INT_ODL",
523			  "EDPBRDG_INT_ODL",
524			  "DPBRDG_INT_ODL",
525			  "DPBRDG_PWREN",
526			  "DPBRDG_RST_ODL",
527			  "I2S_HP_MCLK",
528			  "I2S_HP_BCK",
529			  "I2S_HP_LRCK",
530			  "I2S_HP_DATAIN",
531			  /*
532			   * AP_FLASH_WP_L is crossystem ABI. Schematics
533			   * call it AP_FLASH_WP_ODL.
534			   */
535			  "AP_FLASH_WP_L",
536			  "TRACKPAD_INT_ODL",
537			  "EC_AP_HPD_OD",
538			  "SD_CD_ODL",
539			  "HP_INT_ODL_ALC",
540			  "EN_PP1000_DPBRDG",
541			  "AP_GPIO20",
542			  "TOUCH_INT_L_1V8",
543			  "UART_BT_WAKE_ODL",
544			  "AP_GPIO23",
545			  "AP_SPI_FLASH_CS_L",
546			  "AP_SPI_FLASH_CLK",
547			  "EN_PP3300_DPBRDG_DX",
548			  "AP_SPI_FLASH_MOSI",
549			  "AP_SPI_FLASH_MISO",
550			  "I2S_HP_DATAOUT",
551			  "AP_GPIO30",
552			  "I2S_SPKR_MCLK",
553			  "I2S_SPKR_BCLK",
554			  "I2S_SPKR_LRCK",
555			  "I2S_SPKR_DATAIN",
556			  "I2S_SPKR_DATAOUT",
557			  "AP_SPI_H1_TPM_CLK",
558			  "AP_SPI_H1_TPM_CS_L",
559			  "AP_SPI_H1_TPM_MISO",
560			  "AP_SPI_H1_TPM_MOSI",
561			  "BL_PWM",
562			  "EDPBRDG_PWREN",
563			  "EDPBRDG_RST_ODL",
564			  "EN_PP3300_HUB",
565			  "HUB_RST_L",
566			  "",
567			  "",
568			  "",
569			  "",
570			  "",
571			  "",
572			  "SD_CLK",
573			  "SD_CMD",
574			  "SD_DATA3",
575			  "SD_DATA0",
576			  "SD_DATA2",
577			  "SD_DATA1",
578			  "",
579			  "",
580			  "",
581			  "",
582			  "",
583			  "",
584			  "PCIE_WAKE_ODL",
585			  "PCIE_RST_L",
586			  "PCIE_CLKREQ_ODL",
587			  "",
588			  "",
589			  "",
590			  "",
591			  "",
592			  "",
593			  "",
594			  "",
595			  "",
596			  "",
597			  "",
598			  "",
599			  "",
600			  "",
601			  "",
602			  "",
603			  "",
604			  "",
605			  "",
606			  "",
607			  "",
608			  "",
609			  "",
610			  "SPMI_SCL",
611			  "SPMI_SDA",
612			  "AP_GOOD",
613			  "UART_DBG_TX_AP_RX",
614			  "UART_AP_TX_DBG_RX",
615			  "UART_AP_TX_BT_RX",
616			  "UART_BT_TX_AP_RX",
617			  "MIPI_DPI_D0_R",
618			  "MIPI_DPI_D1_R",
619			  "MIPI_DPI_D2_R",
620			  "MIPI_DPI_D3_R",
621			  "MIPI_DPI_D4_R",
622			  "MIPI_DPI_D5_R",
623			  "MIPI_DPI_D6_R",
624			  "MIPI_DPI_D7_R",
625			  "MIPI_DPI_D8_R",
626			  "MIPI_DPI_D9_R",
627			  "MIPI_DPI_D10_R",
628			  "",
629			  "",
630			  "MIPI_DPI_DE_R",
631			  "MIPI_DPI_D11_R",
632			  "MIPI_DPI_VSYNC_R",
633			  "MIPI_DPI_CLK_R",
634			  "MIPI_DPI_HSYNC_R",
635			  "PCM_BT_DATAIN",
636			  "PCM_BT_SYNC",
637			  "PCM_BT_DATAOUT",
638			  "PCM_BT_CLK",
639			  "AP_I2C_AUDIO_SCL",
640			  "AP_I2C_AUDIO_SDA",
641			  "SCP_I2C_SCL",
642			  "SCP_I2C_SDA",
643			  "AP_I2C_WLAN_SCL",
644			  "AP_I2C_WLAN_SDA",
645			  "AP_I2C_DPBRDG_SCL",
646			  "AP_I2C_DPBRDG_SDA",
647			  "EN_PP1800_DPBRDG_DX",
648			  "EN_PP3300_EDP_DX",
649			  "EN_PP1800_EDPBRDG_DX",
650			  "EN_PP1000_EDPBRDG",
651			  "SCP_JTAG0_TDO",
652			  "SCP_JTAG0_TDI",
653			  "SCP_JTAG0_TMS",
654			  "SCP_JTAG0_TCK",
655			  "SCP_JTAG0_TRSTN",
656			  "EN_PP3000_VMC_PMU",
657			  "EN_PP3300_DISPLAY_DX",
658			  "TOUCH_RST_L_1V8",
659			  "TOUCH_REPORT_DISABLE",
660			  "",
661			  "",
662			  "AP_I2C_TRACKPAD_SCL_1V8",
663			  "AP_I2C_TRACKPAD_SDA_1V8",
664			  "EN_PP3300_WLAN",
665			  "BT_KILL_L",
666			  "WIFI_KILL_L",
667			  "SET_VMC_VOLT_AT_1V8",
668			  "EN_SPK",
669			  "AP_WARM_RST_REQ",
670			  "",
671			  "",
672			  "EN_PP3000_SD_S3",
673			  "AP_EDP_BKLTEN",
674			  "",
675			  "",
676			  "",
677			  "AP_SPI_EC_CLK",
678			  "AP_SPI_EC_CS_L",
679			  "AP_SPI_EC_MISO",
680			  "AP_SPI_EC_MOSI",
681			  "AP_I2C_EDPBRDG_SCL",
682			  "AP_I2C_EDPBRDG_SDA",
683			  "MT6315_PROC_INT",
684			  "MT6315_GPU_INT",
685			  "UART_SERVO_TX_SCP_RX",
686			  "UART_SCP_TX_SERVO_RX",
687			  "BT_RTS_AP_CTS",
688			  "AP_RTS_BT_CTS",
689			  "UART_AP_WAKE_BT_ODL",
690			  "WLAN_ALERT_ODL",
691			  "EC_IN_RW_ODL",
692			  "H1_AP_INT_ODL",
693			  "",
694			  "",
695			  "",
696			  "",
697			  "",
698			  "",
699			  "",
700			  "",
701			  "",
702			  "",
703			  "",
704			  "MSDC0_CMD",
705			  "MSDC0_DAT0",
706			  "MSDC0_DAT2",
707			  "MSDC0_DAT4",
708			  "MSDC0_DAT6",
709			  "MSDC0_DAT1",
710			  "MSDC0_DAT5",
711			  "MSDC0_DAT7",
712			  "MSDC0_DSL",
713			  "MSDC0_CLK",
714			  "MSDC0_DAT3",
715			  "MSDC0_RST_L",
716			  "SCP_VREQ_VAO",
717			  "AUD_DAT_MOSI2",
718			  "AUD_NLE_MOSI1",
719			  "AUD_NLE_MOSI0",
720			  "AUD_DAT_MISO2",
721			  "AP_I2C_SAR_SDA",
722			  "AP_I2C_SAR_SCL",
723			  "AP_I2C_PWR_SCL",
724			  "AP_I2C_PWR_SDA",
725			  "AP_I2C_TS_SCL_1V8",
726			  "AP_I2C_TS_SDA_1V8",
727			  "SRCLKENA0",
728			  "SRCLKENA1",
729			  "AP_EC_WATCHDOG_L",
730			  "PWRAP_SPI0_MI",
731			  "PWRAP_SPI0_CSN",
732			  "PWRAP_SPI0_MO",
733			  "PWRAP_SPI0_CK",
734			  "AP_RTC_CLK32K",
735			  "AUD_CLK_MOSI",
736			  "AUD_SYNC_MOSI",
737			  "AUD_DAT_MOSI0",
738			  "AUD_DAT_MOSI1",
739			  "AUD_DAT_MISO0",
740			  "AUD_DAT_MISO1";
741
742	anx7625_pins: anx7625-default-pins {
743		pins-out {
744			pinmux = <PINMUX_GPIO41__FUNC_GPIO41>,
745				 <PINMUX_GPIO42__FUNC_GPIO42>;
746			output-low;
747		};
748
749		pins-in {
750			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
751			input-enable;
752			bias-pull-up;
753		};
754	};
755
756	aud_clk_mosi_off_pins: aud-clk-mosi-off-pins {
757		pins-mosi-off {
758			pinmux = <PINMUX_GPIO214__FUNC_GPIO214>,
759				 <PINMUX_GPIO215__FUNC_GPIO215>;
760		};
761	};
762
763	aud_clk_mosi_on_pins: aud-clk-mosi-on-pins {
764		pins-mosi-on {
765			pinmux = <PINMUX_GPIO214__FUNC_AUD_CLK_MOSI>,
766				 <PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI>;
767			drive-strength = <10>;
768		};
769	};
770
771	aud_dat_miso_ch34_off_pins: aud-dat-miso-ch34-off-pins {
772		pins-miso-off {
773			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
774		};
775	};
776
777	aud_dat_miso_ch34_on_pins: aud-dat-miso-ch34-on-pins {
778		pins-miso-on {
779			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
780		};
781	};
782
783	aud_dat_miso_off_pins: aud-dat-miso-off-pins {
784		pins-miso-off {
785			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>,
786				 <PINMUX_GPIO219__FUNC_GPIO219>;
787		};
788	};
789
790	aud_dat_miso_on_pins: aud-dat-miso-on-pins {
791		pins-miso-on {
792			pinmux = <PINMUX_GPIO218__FUNC_AUD_DAT_MISO0>,
793				 <PINMUX_GPIO219__FUNC_AUD_DAT_MISO1>;
794			drive-strength = <10>;
795		};
796	};
797
798	aud_dat_miso2_off_pins: aud-dat-miso2-off-pins {
799		pins-miso-off {
800			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
801		};
802	};
803
804	aud_dat_miso2_on_pins: aud-dat-miso2-on-pins {
805		pins-miso-on {
806			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
807		};
808	};
809
810	aud_dat_mosi_ch34_off_pins: aud-dat-mosi-ch34-off-pins {
811		pins-mosi-off {
812			pinmux = <PINMUX_GPIO196__FUNC_GPIO196>;
813		};
814	};
815
816	aud_dat_mosi_ch34_on_pins: aud-dat-mosi-ch34-on-pins {
817		pins-mosi-on {
818			pinmux = <PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2>;
819		};
820	};
821
822	aud_dat_mosi_off_pins: aud-dat-mosi-off-pins {
823		pins-mosi-off {
824			pinmux = <PINMUX_GPIO216__FUNC_GPIO216>,
825				 <PINMUX_GPIO217__FUNC_GPIO217>;
826		};
827	};
828
829	aud_dat_mosi_on_pins: aud-dat-mosi-on-pins {
830		pins-mosi-on {
831			pinmux = <PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0>,
832				 <PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1>;
833			drive-strength = <10>;
834		};
835	};
836
837	aud_gpio_i2s3_off_pins: aud-gpio-i2s3-off-pins {
838		pins-i2s3-off {
839			pinmux = <PINMUX_GPIO32__FUNC_GPIO32>,
840				 <PINMUX_GPIO33__FUNC_GPIO33>,
841				 <PINMUX_GPIO35__FUNC_GPIO35>;
842		};
843	};
844
845	aud_gpio_i2s3_on_pins: aud-gpio-i2s3-on-pins {
846		pins-i2s3-on {
847			pinmux = <PINMUX_GPIO32__FUNC_I2S3_BCK>,
848				 <PINMUX_GPIO33__FUNC_I2S3_LRCK>,
849				 <PINMUX_GPIO35__FUNC_I2S3_DO>;
850		};
851	};
852
853	aud_gpio_i2s8_off_pins: aud-gpio-i2s8-off-pins {
854		pins-i2s8-off {
855			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>,
856				 <PINMUX_GPIO11__FUNC_GPIO11>,
857				 <PINMUX_GPIO12__FUNC_GPIO12>,
858				 <PINMUX_GPIO13__FUNC_GPIO13>;
859		};
860	};
861
862	aud_gpio_i2s8_on_pins: aud-gpio-i2s8-on-pins {
863		pins-i2s8-on {
864			pinmux = <PINMUX_GPIO10__FUNC_I2S8_MCK>,
865				 <PINMUX_GPIO11__FUNC_I2S8_BCK>,
866				 <PINMUX_GPIO12__FUNC_I2S8_LRCK>,
867				 <PINMUX_GPIO13__FUNC_I2S8_DI>;
868		};
869	};
870
871	aud_gpio_i2s9_off_pins: aud-gpio-i2s9-off-pins {
872		pins-i2s9-off {
873			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
874		};
875	};
876
877	aud_gpio_i2s9_on_pins: aud-gpio-i2s9-on-pins {
878		pins-i2s9-on {
879			pinmux = <PINMUX_GPIO29__FUNC_I2S9_DO>;
880		};
881	};
882
883	aud_gpio_tdm_off_pins: aud-gpio-tdm-off-pins {
884		pins-tdm-off {
885			pinmux = <PINMUX_GPIO0__FUNC_GPIO0>,
886				 <PINMUX_GPIO1__FUNC_GPIO1>,
887				 <PINMUX_GPIO2__FUNC_GPIO2>,
888				 <PINMUX_GPIO3__FUNC_GPIO3>;
889		};
890	};
891
892	aud_gpio_tdm_on_pins: aud-gpio-tdm-on-pins {
893		pins-tdm-on {
894			pinmux = <PINMUX_GPIO0__FUNC_TDM_LRCK>,
895				 <PINMUX_GPIO1__FUNC_TDM_BCK>,
896				 <PINMUX_GPIO2__FUNC_TDM_MCK>,
897				 <PINMUX_GPIO3__FUNC_TDM_DATA0>;
898		};
899	};
900
901	aud_nle_mosi_off_pins: aud-nle-mosi-off-pins {
902		pins-nle-mosi-off {
903			pinmux = <PINMUX_GPIO197__FUNC_GPIO197>,
904				 <PINMUX_GPIO198__FUNC_GPIO198>;
905		};
906	};
907
908	aud_nle_mosi_on_pins: aud-nle-mosi-on-pins {
909		pins-nle-mosi-on {
910			pinmux = <PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1>,
911				 <PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0>;
912		};
913	};
914
915	cr50_int: cr50-irq-default-pins {
916		pins-gsc-ap-int-odl {
917			pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
918			input-enable;
919		};
920	};
921
922	cros_ec_int: cros-ec-irq-default-pins {
923		pins-ec-ap-int-odl {
924			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
925			input-enable;
926			bias-pull-up;
927		};
928	};
929
930	i2c0_pins: i2c0-default-pins {
931		pins-bus {
932			pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
933				 <PINMUX_GPIO205__FUNC_SDA0>;
934			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
935			drive-strength-microamp = <1000>;
936		};
937	};
938
939	i2c1_pins: i2c1-default-pins {
940		pins-bus {
941			pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
942				 <PINMUX_GPIO119__FUNC_SDA1>;
943			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
944			drive-strength-microamp = <1000>;
945		};
946	};
947
948	i2c2_pins: i2c2-default-pins {
949		pins-bus {
950			pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
951				 <PINMUX_GPIO142__FUNC_SDA2>;
952			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
953		};
954	};
955
956	i2c3_pins: i2c3-default-pins {
957		pins-bus {
958			pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
959				 <PINMUX_GPIO161__FUNC_SDA3>;
960			bias-disable;
961			drive-strength-microamp = <1000>;
962		};
963	};
964
965	i2c7_pins: i2c7-default-pins {
966		pins-bus {
967			pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
968				 <PINMUX_GPIO125__FUNC_SDA7>;
969			bias-disable;
970			drive-strength-microamp = <1000>;
971		};
972	};
973
974	mmc0_default_pins: mmc0-default-pins {
975		pins-cmd-dat {
976			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
977				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
978				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
979				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
980				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
981				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
982				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
983				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
984				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
985			input-enable;
986			drive-strength = <8>;
987			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
988		};
989
990		pins-clk {
991			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
992			drive-strength = <8>;
993			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
994		};
995
996		pins-rst {
997			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
998			drive-strength = <8>;
999			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
1000		};
1001	};
1002
1003	mmc0_uhs_pins: mmc0-uhs-pins {
1004		pins-cmd-dat {
1005			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
1006				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
1007				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
1008				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
1009				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
1010				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
1011				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
1012				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
1013				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
1014			input-enable;
1015			drive-strength = <10>;
1016			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1017		};
1018
1019		pins-clk {
1020			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
1021			drive-strength = <10>;
1022			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1023		};
1024
1025		pins-rst {
1026			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
1027			drive-strength = <8>;
1028			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
1029		};
1030
1031		pins-ds {
1032			pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
1033			drive-strength = <10>;
1034			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1035		};
1036	};
1037
1038	mmc1_default_pins: mmc1-default-pins {
1039		pins-cmd-dat {
1040			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
1041				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
1042				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
1043				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
1044				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
1045			input-enable;
1046			drive-strength = <8>;
1047			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1048		};
1049
1050		pins-clk {
1051			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
1052			drive-strength = <8>;
1053			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1054		};
1055
1056		pins-insert {
1057			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
1058			input-enable;
1059			bias-pull-up;
1060		};
1061	};
1062
1063	mmc1_uhs_pins: mmc1-uhs-pins {
1064		pins-cmd-dat {
1065			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
1066				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
1067				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
1068				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
1069				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
1070			input-enable;
1071			drive-strength = <8>;
1072			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
1073		};
1074
1075		pins-clk {
1076			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
1077			input-enable;
1078			drive-strength = <8>;
1079			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
1080		};
1081	};
1082
1083	nor_flash_pins: nor-flash-default-pins {
1084		pins-cs-io1 {
1085			pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>,
1086				 <PINMUX_GPIO28__FUNC_SPINOR_IO1>;
1087			input-enable;
1088			bias-pull-up;
1089			drive-strength = <10>;
1090		};
1091
1092		pins-io0 {
1093			pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>;
1094			bias-pull-up;
1095			drive-strength = <10>;
1096		};
1097
1098		pins-clk {
1099			pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>;
1100			input-enable;
1101			bias-pull-up;
1102			drive-strength = <10>;
1103		};
1104	};
1105
1106	pcie_pins: pcie-default-pins {
1107		pins-pcie-wake {
1108			pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>;
1109			bias-pull-up;
1110		};
1111
1112		pins-pcie-pereset {
1113			pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>;
1114		};
1115
1116		pins-pcie-clkreq {
1117			pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>;
1118			bias-pull-up;
1119		};
1120
1121		pins-wifi-kill {
1122			pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */
1123			output-high;
1124		};
1125	};
1126
1127	pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins {
1128		pins-en {
1129			pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
1130			output-low;
1131		};
1132	};
1133
1134	pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins {
1135		pins-en {
1136			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
1137			output-low;
1138		};
1139	};
1140
1141	pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins {
1142		pins-en {
1143			pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
1144			output-low;
1145		};
1146	};
1147
1148	pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins {
1149		pins-en {
1150			pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
1151			output-low;
1152		};
1153	};
1154
1155	pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins {
1156		pins-en {
1157			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
1158			output-low;
1159		};
1160	};
1161
1162	pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins {
1163		pins-en {
1164			pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
1165			output-low;
1166		};
1167	};
1168
1169	pp3300_wlan_pins: pp3300-wlan-pins {
1170		pins-pcie-en-pp3300-wlan {
1171			pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
1172			output-high;
1173		};
1174	};
1175
1176	pwm0_pins: pwm0-default-pins {
1177		pins-pwm {
1178			pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>;
1179		};
1180
1181		pins-inhibit {
1182			pinmux = <PINMUX_GPIO152__FUNC_GPIO152>;
1183			output-high;
1184		};
1185	};
1186
1187	scp_pins: scp-pins {
1188		pins-vreq-vao {
1189			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
1190		};
1191	};
1192
1193	spi1_pins: spi1-default-pins {
1194		pins-cs-mosi-clk {
1195			pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
1196				 <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
1197				 <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
1198			bias-disable;
1199		};
1200
1201		pins-miso {
1202			pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
1203			bias-pull-down;
1204		};
1205	};
1206
1207	spi5_pins: spi5-default-pins {
1208		pins-bus {
1209			pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
1210				 <PINMUX_GPIO37__FUNC_GPIO37>,
1211				 <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
1212				 <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
1213			bias-disable;
1214		};
1215	};
1216
1217	trackpad_pins: trackpad-default-pins {
1218		pins-int-n {
1219			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
1220			input-enable;
1221			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
1222		};
1223	};
1224
1225	touchscreen_pins: touchscreen-default-pins {
1226		pins-irq {
1227			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
1228			input-enable;
1229			bias-pull-up;
1230		};
1231
1232		pins-reset {
1233			pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
1234			output-high;
1235		};
1236
1237		pins-report-sw {
1238			pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
1239			output-low;
1240		};
1241	};
1242
1243	vow_clk_miso_off_pins: vow-clk-miso-off-pins {
1244		pins-miso-off {
1245			pinmux = <PINMUX_GPIO219__FUNC_GPIO219>;
1246		};
1247	};
1248
1249	vow_clk_miso_on_pins: vow-clk-miso-on-pins {
1250		pins-miso-on {
1251			pinmux = <PINMUX_GPIO219__FUNC_VOW_CLK_MISO>;
1252		};
1253	};
1254
1255	vow_dat_miso_off_pins: vow-dat-miso-off-pins {
1256		pins-miso-off {
1257			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>;
1258		};
1259	};
1260
1261	vow_dat_miso_on_pins: vow-dat-miso-on-pins {
1262		pins-miso-on {
1263			pinmux = <PINMUX_GPIO218__FUNC_VOW_DAT_MISO>;
1264		};
1265	};
1266};
1267
1268&pmic {
1269	interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>;
1270};
1271
1272&pwm0 {
1273	status = "okay";
1274
1275	pinctrl-names = "default";
1276	pinctrl-0 = <&pwm0_pins>;
1277};
1278
1279&scp {
1280	status = "okay";
1281
1282	firmware-name = "mediatek/mt8192/scp.img";
1283	memory-region = <&scp_mem_reserved>;
1284	pinctrl-names = "default";
1285	pinctrl-0 = <&scp_pins>;
1286
1287	cros-ec {
1288		compatible = "google,cros-ec-rpmsg";
1289		mediatek,rpmsg-name = "cros-ec-rpmsg";
1290	};
1291};
1292
1293&spi1 {
1294	status = "okay";
1295
1296	mediatek,pad-select = <0>;
1297	pinctrl-names = "default";
1298	pinctrl-0 = <&spi1_pins>;
1299
1300	cros_ec: ec@0 {
1301		compatible = "google,cros-ec-spi";
1302		reg = <0>;
1303		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
1304		spi-max-frequency = <3000000>;
1305		pinctrl-names = "default";
1306		pinctrl-0 = <&cros_ec_int>;
1307
1308		#address-cells = <1>;
1309		#size-cells = <0>;
1310
1311		base_detection: cbas {
1312			compatible = "google,cros-cbas";
1313		};
1314
1315		cros_ec_pwm: pwm {
1316			compatible = "google,cros-ec-pwm";
1317			#pwm-cells = <1>;
1318
1319			status = "disabled";
1320		};
1321
1322		i2c_tunnel: i2c-tunnel {
1323			compatible = "google,cros-ec-i2c-tunnel";
1324			google,remote-bus = <0>;
1325			#address-cells = <1>;
1326			#size-cells = <0>;
1327		};
1328
1329		mt6360_ldo3_reg: regulator@0 {
1330			compatible = "google,cros-ec-regulator";
1331			reg = <0>;
1332			regulator-min-microvolt = <1800000>;
1333			regulator-max-microvolt = <3300000>;
1334		};
1335
1336		mt6360_ldo5_reg: regulator@1 {
1337			compatible = "google,cros-ec-regulator";
1338			reg = <1>;
1339			regulator-min-microvolt = <3300000>;
1340			regulator-max-microvolt = <3300000>;
1341		};
1342
1343		typec {
1344			compatible = "google,cros-ec-typec";
1345			#address-cells = <1>;
1346			#size-cells = <0>;
1347
1348			usb_c0: connector@0 {
1349				compatible = "usb-c-connector";
1350				reg = <0>;
1351				label = "left";
1352				power-role = "dual";
1353				data-role = "host";
1354				try-power-role = "source";
1355			};
1356
1357			usb_c1: connector@1 {
1358				compatible = "usb-c-connector";
1359				reg = <1>;
1360				label = "right";
1361				power-role = "dual";
1362				data-role = "host";
1363				try-power-role = "source";
1364			};
1365		};
1366	};
1367};
1368
1369&spi5 {
1370	status = "okay";
1371
1372	cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
1373	mediatek,pad-select = <0>;
1374	pinctrl-names = "default";
1375	pinctrl-0 = <&spi5_pins>;
1376
1377	cr50@0 {
1378		compatible = "google,cr50";
1379		reg = <0>;
1380		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
1381		spi-max-frequency = <1000000>;
1382		pinctrl-names = "default";
1383		pinctrl-0 = <&cr50_int>;
1384	};
1385};
1386
1387&spmi {
1388	#address-cells = <2>;
1389	#size-cells = <0>;
1390
1391	mt6315_6: pmic@6 {
1392		compatible = "mediatek,mt6315-regulator";
1393		reg = <0x6 SPMI_USID>;
1394
1395		regulators {
1396			mt6315_6_vbuck1: vbuck1 {
1397				regulator-compatible = "vbuck1";
1398				regulator-name = "Vbcpu";
1399				regulator-min-microvolt = <300000>;
1400				regulator-max-microvolt = <1193750>;
1401				regulator-enable-ramp-delay = <256>;
1402				regulator-allowed-modes = <0 1 2>;
1403				regulator-always-on;
1404			};
1405
1406			mt6315_6_vbuck3: vbuck3 {
1407				regulator-compatible = "vbuck3";
1408				regulator-name = "Vlcpu";
1409				regulator-min-microvolt = <300000>;
1410				regulator-max-microvolt = <1193750>;
1411				regulator-enable-ramp-delay = <256>;
1412				regulator-allowed-modes = <0 1 2>;
1413				regulator-always-on;
1414			};
1415		};
1416	};
1417
1418	mt6315_7: pmic@7 {
1419		compatible = "mediatek,mt6315-regulator";
1420		reg = <0x7 SPMI_USID>;
1421
1422		regulators {
1423			mt6315_7_vbuck1: vbuck1 {
1424				regulator-compatible = "vbuck1";
1425				regulator-name = "Vgpu";
1426				regulator-min-microvolt = <606250>;
1427				regulator-max-microvolt = <800000>;
1428				regulator-enable-ramp-delay = <256>;
1429				regulator-allowed-modes = <0 1 2>;
1430				regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
1431				regulator-coupled-max-spread = <10000>;
1432			};
1433		};
1434	};
1435};
1436
1437&uart0 {
1438	status = "okay";
1439};
1440
1441&xhci {
1442	status = "okay";
1443
1444	wakeup-source;
1445	vusb33-supply = <&pp3300_g>;
1446	vbus-supply = <&pp5000_a>;
1447};
1448
1449#include <arm/cros-ec-keyboard.dtsi>
1450#include <arm/cros-ec-sbs.dtsi>
1451