xref: /freebsd/sys/contrib/device-tree/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145) 
1/*
2 * Copyright (c) 2018 MediaTek Inc.
3 * Author: Ryder Lee <ryder.lee@mediatek.com>
4 *
5 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 */
7
8/dts-v1/;
9#include <dt-bindings/input/input.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/leds/common.h>
12
13#include "mt7622.dtsi"
14#include "mt6380.dtsi"
15
16/ {
17	model = "Bananapi BPI-R64";
18	chassis-type = "embedded";
19	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
20
21	aliases {
22		serial0 = &uart0;
23	};
24
25	chosen {
26		stdout-path = "serial0:115200n8";
27		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
28	};
29
30	cpus {
31		cpu@0 {
32			proc-supply = <&mt6380_vcpu_reg>;
33			sram-supply = <&mt6380_vm_reg>;
34		};
35
36		cpu@1 {
37			proc-supply = <&mt6380_vcpu_reg>;
38			sram-supply = <&mt6380_vm_reg>;
39		};
40	};
41
42	gpio-keys {
43		compatible = "gpio-keys";
44
45		factory-key {
46			label = "factory";
47			linux,code = <BTN_0>;
48			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
49		};
50
51		wps-key {
52			label = "wps";
53			linux,code = <KEY_WPS_BUTTON>;
54			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
55		};
56	};
57
58	leds {
59		compatible = "gpio-leds";
60
61		led-0 {
62			label = "bpi-r64:pio:green";
63			color = <LED_COLOR_ID_GREEN>;
64			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
65			default-state = "off";
66		};
67
68		led-1 {
69			label = "bpi-r64:pio:red";
70			color = <LED_COLOR_ID_RED>;
71			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
72			default-state = "off";
73		};
74	};
75
76	memory {
77		reg = <0 0x40000000 0 0x40000000>;
78	};
79
80	reg_1p8v: regulator-1p8v {
81		compatible = "regulator-fixed";
82		regulator-name = "fixed-1.8V";
83		regulator-min-microvolt = <1800000>;
84		regulator-max-microvolt = <1800000>;
85		regulator-always-on;
86	};
87
88	reg_3p3v: regulator-3p3v {
89		compatible = "regulator-fixed";
90		regulator-name = "fixed-3.3V";
91		regulator-min-microvolt = <3300000>;
92		regulator-max-microvolt = <3300000>;
93		regulator-boot-on;
94		regulator-always-on;
95	};
96
97	reg_5v: regulator-5v {
98		compatible = "regulator-fixed";
99		regulator-name = "fixed-5V";
100		regulator-min-microvolt = <5000000>;
101		regulator-max-microvolt = <5000000>;
102		regulator-boot-on;
103		regulator-always-on;
104	};
105};
106
107&bch {
108	status = "disabled";
109};
110
111&btif {
112	status = "okay";
113};
114
115&cir {
116	pinctrl-names = "default";
117	pinctrl-0 = <&irrx_pins>;
118	status = "okay";
119};
120
121&eth {
122	status = "okay";
123	gmac0: mac@0 {
124		compatible = "mediatek,eth-mac";
125		reg = <0>;
126		phy-mode = "2500base-x";
127
128		fixed-link {
129			speed = <2500>;
130			full-duplex;
131			pause;
132		};
133	};
134
135	gmac1: mac@1 {
136		compatible = "mediatek,eth-mac";
137		reg = <1>;
138		phy-mode = "rgmii";
139
140		fixed-link {
141			speed = <1000>;
142			full-duplex;
143			pause;
144		};
145	};
146
147	mdio: mdio-bus {
148		#address-cells = <1>;
149		#size-cells = <0>;
150
151		switch@0 {
152			compatible = "mediatek,mt7531";
153			reg = <0>;
154			interrupt-controller;
155			#interrupt-cells = <1>;
156			interrupt-parent = <&pio>;
157			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
158			reset-gpios = <&pio 54 0>;
159
160			ports {
161				#address-cells = <1>;
162				#size-cells = <0>;
163
164				port@0 {
165					reg = <0>;
166					label = "wan";
167				};
168
169				port@1 {
170					reg = <1>;
171					label = "lan0";
172				};
173
174				port@2 {
175					reg = <2>;
176					label = "lan1";
177				};
178
179				port@3 {
180					reg = <3>;
181					label = "lan2";
182				};
183
184				port@4 {
185					reg = <4>;
186					label = "lan3";
187				};
188
189				port@6 {
190					reg = <6>;
191					label = "cpu";
192					ethernet = <&gmac0>;
193					phy-mode = "2500base-x";
194
195					fixed-link {
196						speed = <2500>;
197						full-duplex;
198						pause;
199					};
200				};
201			};
202		};
203
204	};
205};
206
207&i2c1 {
208	pinctrl-names = "default";
209	pinctrl-0 = <&i2c1_pins>;
210	status = "okay";
211};
212
213&i2c2 {
214	pinctrl-names = "default";
215	pinctrl-0 = <&i2c2_pins>;
216	status = "okay";
217};
218
219&mmc0 {
220	pinctrl-names = "default", "state_uhs";
221	pinctrl-0 = <&emmc_pins_default>;
222	pinctrl-1 = <&emmc_pins_uhs>;
223	status = "okay";
224	bus-width = <8>;
225	max-frequency = <50000000>;
226	cap-mmc-highspeed;
227	mmc-hs200-1_8v;
228	vmmc-supply = <&reg_3p3v>;
229	vqmmc-supply = <&reg_1p8v>;
230	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
231	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
232	non-removable;
233};
234
235&mmc1 {
236	pinctrl-names = "default", "state_uhs";
237	pinctrl-0 = <&sd0_pins_default>;
238	pinctrl-1 = <&sd0_pins_uhs>;
239	status = "okay";
240	bus-width = <4>;
241	max-frequency = <50000000>;
242	cap-sd-highspeed;
243	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
244	vmmc-supply = <&reg_3p3v>;
245	vqmmc-supply = <&reg_3p3v>;
246	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
247	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
248};
249
250&nandc {
251	pinctrl-names = "default";
252	pinctrl-0 = <&parallel_nand_pins>;
253	status = "disabled";
254};
255
256&bch {
257	status = "okay";
258};
259
260&snfi {
261	pinctrl-names = "default";
262	pinctrl-0 = <&serial_nand_pins>;
263	status = "okay";
264	flash@0 {
265		compatible = "spi-nand";
266		reg = <0>;
267		spi-tx-bus-width = <4>;
268		spi-rx-bus-width = <4>;
269		nand-ecc-engine = <&snfi>;
270		partitions {
271			compatible = "fixed-partitions";
272			#address-cells = <1>;
273			#size-cells = <1>;
274
275			partition@0 {
276				label = "bl2";
277				reg = <0x0 0x80000>;
278				read-only;
279			};
280
281			partition@80000 {
282				label = "fip";
283				reg = <0x80000 0x200000>;
284				read-only;
285			};
286
287			ubi: partition@280000 {
288				label = "ubi";
289				reg = <0x280000 0x7d80000>;
290			};
291		};
292	};
293};
294
295&pcie0 {
296	pinctrl-names = "default";
297	pinctrl-0 = <&pcie0_pins>;
298	status = "okay";
299};
300
301&pcie1 {
302	pinctrl-names = "default";
303	pinctrl-0 = <&pcie1_pins>;
304	status = "okay";
305};
306
307&pio {
308	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
309	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
310	 */
311	asm_sel {
312		gpio-hog;
313		gpios = <90 GPIO_ACTIVE_HIGH>;
314		output-high;
315	};
316
317	/* eMMC is shared pin with parallel NAND */
318	emmc_pins_default: emmc-pins-default {
319		mux {
320			function = "emmc", "emmc_rst";
321			groups = "emmc";
322		};
323
324		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
325		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
326		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
327		 */
328		conf-cmd-dat {
329			pins = "NDL0", "NDL1", "NDL2",
330			       "NDL3", "NDL4", "NDL5",
331			       "NDL6", "NDL7", "NRB";
332			input-enable;
333			bias-pull-up;
334		};
335
336		conf-clk {
337			pins = "NCLE";
338			bias-pull-down;
339		};
340	};
341
342	emmc_pins_uhs: emmc-pins-uhs {
343		mux {
344			function = "emmc";
345			groups = "emmc";
346		};
347
348		conf-cmd-dat {
349			pins = "NDL0", "NDL1", "NDL2",
350			       "NDL3", "NDL4", "NDL5",
351			       "NDL6", "NDL7", "NRB";
352			input-enable;
353			drive-strength = <4>;
354			bias-pull-up;
355		};
356
357		conf-clk {
358			pins = "NCLE";
359			drive-strength = <4>;
360			bias-pull-down;
361		};
362	};
363
364	eth_pins: eth-pins {
365		mux {
366			function = "eth";
367			groups = "mdc_mdio", "rgmii_via_gmac2";
368		};
369	};
370
371	i2c1_pins: i2c1-pins {
372		mux {
373			function = "i2c";
374			groups = "i2c1_0";
375		};
376	};
377
378	i2c2_pins: i2c2-pins {
379		mux {
380			function = "i2c";
381			groups = "i2c2_0";
382		};
383	};
384
385	i2s1_pins: i2s1-pins {
386		mux {
387			function = "i2s";
388			groups =  "i2s_out_mclk_bclk_ws",
389				  "i2s1_in_data",
390				  "i2s1_out_data";
391		};
392
393		conf {
394			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
395			       "I2S_WS", "I2S_MCLK";
396			drive-strength = <12>;
397			bias-pull-down;
398		};
399	};
400
401	irrx_pins: irrx-pins {
402		mux {
403			function = "ir";
404			groups = "ir_1_rx";
405		};
406	};
407
408	irtx_pins: irtx-pins {
409		mux {
410			function = "ir";
411			groups = "ir_1_tx";
412		};
413	};
414
415	/* Parallel nand is shared pin with eMMC */
416	parallel_nand_pins: parallel-nand-pins {
417		mux {
418			function = "flash";
419			groups = "par_nand";
420		};
421	};
422
423	pcie0_pins: pcie0-pins {
424		mux {
425			function = "pcie";
426			groups = "pcie0_pad_perst",
427				 "pcie0_1_waken",
428				 "pcie0_1_clkreq";
429		};
430	};
431
432	pcie1_pins: pcie1-pins {
433		mux {
434			function = "pcie";
435			groups = "pcie1_pad_perst",
436				 "pcie1_0_waken",
437				 "pcie1_0_clkreq";
438		};
439	};
440
441	pmic_bus_pins: pmic-bus-pins {
442		mux {
443			function = "pmic";
444			groups = "pmic_bus";
445		};
446	};
447
448	pwm_pins: pwm-pins {
449		mux {
450			function = "pwm";
451			groups = "pwm_ch1_0", /* mt7622_pwm_ch1_0_pins[] = { 51, }; */
452				 "pwm_ch2_0", /* mt7622_pwm_ch2_0_pins[] = { 52, }; */
453				 "pwm_ch3_2", /* mt7622_pwm_ch3_2_pins[] = { 97, }; */
454				 "pwm_ch4_1", /* mt7622_pwm_ch4_1_pins[] = { 67, }; */
455				 "pwm_ch5_0", /* mt7622_pwm_ch5_0_pins[] = { 68, }; */
456				 "pwm_ch6_0"; /* mt7622_pwm_ch6_0_pins[] = { 69, }; */
457		};
458	};
459
460	wled_pins: wled-pins {
461		mux {
462			function = "led";
463			groups = "wled";
464		};
465	};
466
467	sd0_pins_default: sd0-pins-default {
468		mux {
469			function = "sd";
470			groups = "sd_0";
471		};
472
473		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
474		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
475		 *  DAT2, DAT3, CMD, CLK for SD respectively.
476		 */
477		conf-cmd-data {
478			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
479			       "I2S2_IN","I2S4_OUT";
480			input-enable;
481			drive-strength = <8>;
482			bias-pull-up;
483		};
484		conf-clk {
485			pins = "I2S3_OUT";
486			drive-strength = <12>;
487			bias-pull-down;
488		};
489		conf-cd {
490			pins = "TXD3";
491			bias-pull-up;
492		};
493	};
494
495	sd0_pins_uhs: sd0-pins-uhs {
496		mux {
497			function = "sd";
498			groups = "sd_0";
499		};
500
501		conf-cmd-data {
502			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
503			       "I2S2_IN","I2S4_OUT";
504			input-enable;
505			bias-pull-up;
506		};
507
508		conf-clk {
509			pins = "I2S3_OUT";
510			bias-pull-down;
511		};
512	};
513
514	/* Serial NAND is shared pin with SPI-NOR */
515	serial_nand_pins: serial-nand-pins {
516		mux {
517			function = "flash";
518			groups = "snfi";
519		};
520	};
521
522	spic0_pins: spic0-pins {
523		mux {
524			function = "spi";
525			groups = "spic0_0";
526		};
527	};
528
529	spic1_pins: spic1-pins {
530		mux {
531			function = "spi";
532			groups = "spic1_0";
533		};
534	};
535
536	/* SPI-NOR is shared pin with serial NAND */
537	spi_nor_pins: spi-nor-pins {
538		mux {
539			function = "flash";
540			groups = "spi_nor";
541		};
542	};
543
544	/* serial NAND is shared pin with SPI-NOR */
545	serial_nand_pins: serial-nand-pins {
546		mux {
547			function = "flash";
548			groups = "snfi";
549		};
550	};
551
552	uart0_pins: uart0-pins {
553		mux {
554			function = "uart";
555			groups = "uart0_0_tx_rx" ;
556		};
557	};
558
559	uart2_pins: uart2-pins {
560		mux {
561			function = "uart";
562			groups = "uart2_1_tx_rx" ;
563		};
564	};
565
566	watchdog_pins: watchdog-pins {
567		mux {
568			function = "watchdog";
569			groups = "watchdog";
570		};
571	};
572};
573
574&pwm {
575	pinctrl-names = "default";
576	pinctrl-0 = <&pwm_pins>;
577	status = "okay";
578};
579
580&pwrap {
581	pinctrl-names = "default";
582	pinctrl-0 = <&pmic_bus_pins>;
583
584	status = "okay";
585};
586
587&sata {
588	status = "disabled";
589};
590
591&sata_phy {
592	status = "disabled";
593};
594
595&spi0 {
596	pinctrl-names = "default";
597	pinctrl-0 = <&spic0_pins>;
598	status = "okay";
599};
600
601&spi1 {
602	pinctrl-names = "default";
603	pinctrl-0 = <&spic1_pins>;
604};
605
606&ssusb {
607	vusb33-supply = <&reg_3p3v>;
608	vbus-supply = <&reg_5v>;
609	status = "okay";
610};
611
612&u3phy {
613	status = "okay";
614};
615
616&uart0 {
617	pinctrl-names = "default";
618	pinctrl-0 = <&uart0_pins>;
619	status = "okay";
620};
621
622&uart2 {
623	pinctrl-names = "default";
624	pinctrl-0 = <&uart2_pins>;
625};
626
627&watchdog {
628	pinctrl-names = "default";
629	pinctrl-0 = <&watchdog_pins>;
630	status = "okay";
631};
632
633&wmac {
634	status = "okay";
635};
636