1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2016 Marvell Technology Group Ltd. 4 * Copyright (C) 2020 Sartura Ltd. 5 * 6 * Device Tree file for IEI Puzzle-M801 7 */ 8 9#include "armada-8040.dtsi" 10 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/leds/common.h> 13 14/ { 15 model = "IEI-Puzzle-M801"; 16 compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; 17 18 aliases { 19 ethernet0 = &cp0_eth0; 20 ethernet1 = &cp1_eth0; 21 ethernet2 = &cp0_eth1; 22 ethernet3 = &cp0_eth2; 23 ethernet4 = &cp1_eth1; 24 ethernet5 = &cp1_eth2; 25 }; 26 27 chosen { 28 stdout-path = "serial0:115200n8"; 29 }; 30 31 memory@0 { 32 device_type = "memory"; 33 reg = <0x0 0x0 0x0 0x80000000>; 34 }; 35 36 /* Regulator labels correspond with schematics */ 37 v_3_3: regulator-3-3v { 38 compatible = "regulator-fixed"; 39 regulator-name = "v_3_3"; 40 regulator-min-microvolt = <3300000>; 41 regulator-max-microvolt = <3300000>; 42 regulator-always-on; 43 status = "okay"; 44 }; 45 46 v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { 47 compatible = "regulator-fixed"; 48 enable-active-high; 49 gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; 50 pinctrl-names = "default"; 51 pinctrl-0 = <&cp0_xhci_vbus_pins>; 52 regulator-name = "v_5v0_usb3_hst_vbus"; 53 regulator-min-microvolt = <5000000>; 54 regulator-max-microvolt = <5000000>; 55 status = "okay"; 56 }; 57 58 v_vddo_h: regulator-1-8v { 59 compatible = "regulator-fixed"; 60 regulator-name = "v_vddo_h"; 61 regulator-min-microvolt = <1800000>; 62 regulator-max-microvolt = <1800000>; 63 regulator-always-on; 64 status = "okay"; 65 }; 66 67 sfp_cp0_eth0: sfp-cp0-eth0 { 68 compatible = "sff,sfp"; 69 i2c-bus = <&sfpplus0_i2c>; 70 los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; 71 mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; 72 tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; 73 tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; 74 maximum-power-milliwatt = <3000>; 75 }; 76 77 sfp_cp1_eth0: sfp-cp1-eth0 { 78 compatible = "sff,sfp"; 79 i2c-bus = <&sfpplus1_i2c>; 80 los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; 81 mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; 82 tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; 83 tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; 84 maximum-power-milliwatt = <3000>; 85 }; 86 87 leds { 88 compatible = "gpio-leds"; 89 status = "okay"; 90 pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>; 91 pinctrl-names = "default"; 92 93 led-0 { 94 /* SFP+ port 2: Activity */ 95 function = LED_FUNCTION_LAN; 96 function-enumerator = <0>; 97 gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; 98 }; 99 100 led-1 { 101 /* SFP+ port 1: Activity */ 102 function = LED_FUNCTION_LAN; 103 function-enumerator = <1>; 104 gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; 105 }; 106 107 led-2 { 108 /* SFP+ port 2: 10 Gbps indicator */ 109 function = LED_FUNCTION_LAN; 110 function-enumerator = <2>; 111 gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; 112 }; 113 114 led-3 { 115 /* SFP+ port 2: 1 Gbps indicator */ 116 function = LED_FUNCTION_LAN; 117 function-enumerator = <3>; 118 gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>; 119 }; 120 121 led-4 { 122 /* SFP+ port 1: 10 Gbps indicator */ 123 function = LED_FUNCTION_LAN; 124 function-enumerator = <4>; 125 gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; 126 }; 127 128 led-5 { 129 /* SFP+ port 1: 1 Gbps indicator */ 130 function = LED_FUNCTION_LAN; 131 function-enumerator = <5>; 132 gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; 133 }; 134 135 led-6 { 136 function = LED_FUNCTION_DISK; 137 linux,default-trigger = "disk-activity"; 138 gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; 139 }; 140 141 }; 142}; 143 144&ap_sdhci0 { 145 bus-width = <8>; 146 /* 147 * Not stable in HS modes - phy needs "more calibration", so add 148 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. 149 */ 150 marvell,xenon-phy-slow-mode; 151 no-1-8-v; 152 no-sd; 153 no-sdio; 154 non-removable; 155 status = "okay"; 156 vqmmc-supply = <&v_vddo_h>; 157}; 158 159&ap_thermal_cpu1 { 160 trips { 161 cpu_active: cpu-active { 162 temperature = <44000>; 163 hysteresis = <2000>; 164 type = "active"; 165 }; 166 }; 167 cooling-maps { 168 fan-map { 169 trip = <&cpu_active>; 170 cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>, 171 <&chassis_fan_group1 64 THERMAL_NO_LIMIT>; 172 }; 173 }; 174}; 175 176&i2c0 { 177 clock-frequency = <100000>; 178 status = "okay"; 179 180 rtc@32 { 181 compatible = "epson,rx8010"; 182 reg = <0x32>; 183 }; 184}; 185 186&spi0 { 187 status = "okay"; 188 flash@0 { 189 #address-cells = <0x1>; 190 #size-cells = <0x1>; 191 compatible = "jedec,spi-nor"; 192 reg = <0x0>; 193 spi-max-frequency = <20000000>; 194 partition@u-boot { 195 label = "u-boot"; 196 reg = <0x00000000 0x001f0000>; 197 }; 198 partition@u-boot-env { 199 label = "u-boot-env"; 200 reg = <0x001f0000 0x00010000>; 201 }; 202 partition@ubi1 { 203 label = "ubi1"; 204 reg = <0x00200000 0x03f00000>; 205 }; 206 partition@ubi2 { 207 label = "ubi2"; 208 reg = <0x04100000 0x03f00000>; 209 }; 210 }; 211}; 212 213&uart0 { 214 status = "okay"; 215 pinctrl-0 = <&uart0_pins>; 216 pinctrl-names = "default"; 217}; 218 219&uart1 { 220 status = "okay"; 221 /* IEI WT61P803 PUZZLE MCU Controller */ 222 mcu { 223 compatible = "iei,wt61p803-puzzle"; 224 current-speed = <115200>; 225 enable-beep; 226 227 leds { 228 compatible = "iei,wt61p803-puzzle-leds"; 229 #address-cells = <1>; 230 #size-cells = <0>; 231 232 led@0 { 233 reg = <0>; 234 function = LED_FUNCTION_POWER; 235 color = <LED_COLOR_ID_BLUE>; 236 }; 237 }; 238 239 hwmon { 240 compatible = "iei,wt61p803-puzzle-hwmon"; 241 #address-cells = <1>; 242 #size-cells = <0>; 243 244 chassis_fan_group0:fan-group@0 { 245 #cooling-cells = <2>; 246 reg = <0x00>; 247 cooling-levels = <64 102 170 230 250>; 248 }; 249 250 chassis_fan_group1:fan-group@1 { 251 #cooling-cells = <2>; 252 reg = <0x01>; 253 cooling-levels = <64 102 170 230 250>; 254 }; 255 }; 256 }; 257}; 258 259&cp0_rtc { 260 status = "disabled"; 261}; 262 263&cp0_i2c0 { 264 clock-frequency = <100000>; 265 pinctrl-names = "default"; 266 pinctrl-0 = <&cp0_i2c0_pins>; 267 status = "okay"; 268 269 sfpplus_gpio: gpio@21 { 270 compatible = "nxp,pca9555"; 271 reg = <0x21>; 272 gpio-controller; 273 #gpio-cells = <2>; 274 }; 275 276 eeprom@54 { 277 compatible = "atmel,24c04"; 278 reg = <0x54>; 279 }; 280}; 281 282&cp0_i2c1 { 283 clock-frequency = <100000>; 284 pinctrl-names = "default"; 285 pinctrl-0 = <&cp0_i2c1_pins>; 286 status = "okay"; 287 288 i2c-mux@70 { 289 compatible = "nxp,pca9544"; 290 #address-cells = <1>; 291 #size-cells = <0>; 292 reg = <0x70>; 293 294 sfpplus0_i2c: i2c@0 { 295 #address-cells = <1>; 296 #size-cells = <0>; 297 reg = <0>; 298 }; 299 300 sfpplus1_i2c: i2c@1 { 301 #address-cells = <1>; 302 #size-cells = <0>; 303 reg = <1>; 304 }; 305 }; 306}; 307 308&cp0_uart1 { 309 pinctrl-names = "default"; 310 pinctrl-0 = <&cp0_uart1_pins>; 311 status = "okay"; 312}; 313 314&cp0_mdio { 315 #address-cells = <1>; 316 #size-cells = <0>; 317 318 status = "okay"; 319 320 ge_phy2: ethernet-phy@0 { 321 reg = <0>; 322 }; 323 324 ge_phy3: ethernet-phy@1 { 325 reg = <1>; 326 }; 327}; 328 329&cp0_pcie0 { 330 pinctrl-names = "default"; 331 pinctrl-0 = <&cp0_pcie_pins>; 332 num-lanes = <1>; 333 num-viewport = <8>; 334 reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; 335 ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; 336 phys = <&cp0_comphy0 0>; 337 phy-names = "cp0-pcie0-x1-phy"; 338 status = "okay"; 339}; 340 341&cp0_pinctrl { 342 cp0_ge_mdio_pins: ge-mdio-pins { 343 marvell,pins = "mpp32", "mpp34"; 344 marvell,function = "ge"; 345 }; 346 cp0_i2c1_pins: i2c1-pins { 347 marvell,pins = "mpp35", "mpp36"; 348 marvell,function = "i2c1"; 349 }; 350 cp0_i2c0_pins: i2c0-pins { 351 marvell,pins = "mpp37", "mpp38"; 352 marvell,function = "i2c0"; 353 }; 354 cp0_uart1_pins: uart1-pins { 355 marvell,pins = "mpp40", "mpp41"; 356 marvell,function = "uart1"; 357 }; 358 cp0_xhci_vbus_pins: xhci0-vbus-pins { 359 marvell,pins = "mpp47"; 360 marvell,function = "gpio"; 361 }; 362 cp0_pcie_pins: pcie-pins { 363 marvell,pins = "mpp52"; 364 marvell,function = "gpio"; 365 }; 366 cp0_sdhci_pins: sdhci-pins { 367 marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", 368 "mpp60", "mpp61"; 369 marvell,function = "sdio"; 370 }; 371 cp0_sfpplus_led_pins: sfpplus-led-pins { 372 marvell,pins = "mpp54"; 373 marvell,function = "gpio"; 374 }; 375}; 376 377&cp0_ethernet { 378 status = "okay"; 379}; 380 381&cp0_eth0 { 382 status = "okay"; 383 phy-mode = "10gbase-r"; 384 phys = <&cp0_comphy4 0>; 385 local-mac-address = [ae 00 00 00 ff 00]; 386 sfp = <&sfp_cp0_eth0>; 387 managed = "in-band-status"; 388}; 389 390&cp0_eth1 { 391 status = "okay"; 392 phy = <&ge_phy2>; 393 phy-mode = "sgmii"; 394 local-mac-address = [ae 00 00 00 ff 01]; 395 phys = <&cp0_comphy3 1>; 396}; 397 398&cp0_eth2 { 399 status = "okay"; 400 phy-mode = "sgmii"; 401 phys = <&cp0_comphy1 2>; 402 local-mac-address = [ae 00 00 00 ff 02]; 403 phy = <&ge_phy3>; 404}; 405 406&cp0_sata0 { 407 status = "okay"; 408 409 sata-port@0 { 410 phys = <&cp0_comphy2 0>; 411 phy-names = "cp0-sata0-0-phy"; 412 }; 413 414 sata-port@1 { 415 phys = <&cp0_comphy5 1>; 416 phy-names = "cp0-sata0-1-phy"; 417 }; 418}; 419 420&cp0_sdhci0 { 421 broken-cd; 422 bus-width = <4>; 423 pinctrl-names = "default"; 424 pinctrl-0 = <&cp0_sdhci_pins>; 425 status = "okay"; 426 vqmmc-supply = <&v_3_3>; 427}; 428 429&cp0_usb3_0 { 430 status = "okay"; 431}; 432 433&cp0_usb3_1 { 434 status = "okay"; 435}; 436 437&cp1_i2c0 { 438 clock-frequency = <100000>; 439 status = "disabled"; 440}; 441 442&cp1_i2c1 { 443 clock-frequency = <100000>; 444 status = "disabled"; 445}; 446 447&cp1_rtc { 448 status = "disabled"; 449}; 450 451&cp1_ethernet { 452 status = "okay"; 453}; 454 455&cp1_eth0 { 456 status = "okay"; 457 phy-mode = "10gbase-r"; 458 phys = <&cp1_comphy4 0>; 459 local-mac-address = [ae 00 00 00 ff 03]; 460 sfp = <&sfp_cp1_eth0>; 461 managed = "in-band-status"; 462}; 463 464&cp1_eth1 { 465 status = "okay"; 466 phy = <&ge_phy4>; 467 phy-mode = "sgmii"; 468 local-mac-address = [ae 00 00 00 ff 04]; 469 phys = <&cp1_comphy3 1>; 470}; 471 472&cp1_eth2 { 473 status = "okay"; 474 phy-mode = "sgmii"; 475 local-mac-address = [ae 00 00 00 ff 05]; 476 phys = <&cp1_comphy5 2>; 477 phy = <&ge_phy5>; 478}; 479 480&cp1_pinctrl { 481 cp1_sfpplus_led_pins: sfpplus-led-pins { 482 marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31"; 483 marvell,function = "gpio"; 484 }; 485}; 486 487&cp1_uart0 { 488 status = "disabled"; 489}; 490 491&cp1_comphy2 { 492 cp1_usbh0_con: connector { 493 compatible = "usb-a-connector"; 494 phy-supply = <&v_5v0_usb3_hst_vbus>; 495 }; 496}; 497 498&cp1_usb3_0 { 499 phys = <&cp1_comphy2 0>; 500 phy-names = "cp1-usb3h0-comphy"; 501 status = "okay"; 502}; 503 504&cp1_mdio { 505 #address-cells = <1>; 506 #size-cells = <0>; 507 508 status = "okay"; 509 510 ge_phy4: ethernet-phy@1 { 511 reg = <1>; 512 }; 513 ge_phy5: ethernet-phy@0 { 514 reg = <0>; 515 }; 516}; 517 518&cp1_pcie0 { 519 num-lanes = <2>; 520 phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; 521 phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy"; 522 status = "okay"; 523}; 524