1// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) 2 3/dts-v1/; 4#include <dt-bindings/gpio/gpio.h> 5#include <dt-bindings/input/input.h> 6#include "armada-372x.dtsi" 7 8/ { 9 model = "GL.iNet GL-MV1000"; 10 compatible = "glinet,gl-mv1000", "marvell,armada3720"; 11 12 aliases { 13 led-boot = &led_power; 14 led-failsafe = &led_power; 15 led-running = &led_power; 16 led-upgrade = &led_power; 17 }; 18 19 chosen { 20 stdout-path = "serial0:115200n8"; 21 }; 22 23 memory@0 { 24 device_type = "memory"; 25 reg = <0x00000000 0x00000000 0x00000000 0x20000000>; 26 }; 27 28 vcc_sd_reg1: regulator { 29 compatible = "regulator-gpio"; 30 regulator-name = "vcc_sd1"; 31 regulator-min-microvolt = <1800000>; 32 regulator-max-microvolt = <3300000>; 33 regulator-boot-on; 34 35 gpios-states = <0>; 36 states = <1800000 0x1 37 3300000 0x0>; 38 enable-active-high; 39 }; 40 41 keys { 42 compatible = "gpio-keys"; 43 44 reset { 45 label = "reset"; 46 linux,code = <KEY_RESTART>; 47 gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; 48 }; 49 50 switch { 51 label = "switch"; 52 linux,code = <BTN_0>; 53 gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; 54 }; 55 }; 56 57 leds { 58 compatible = "gpio-leds"; 59 60 vpn { 61 label = "green:vpn"; 62 gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; 63 }; 64 65 wan { 66 label = "green:wan"; 67 gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; 68 }; 69 70 led_power: power { 71 label = "green:power"; 72 gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; 73 default-state = "on"; 74 }; 75 }; 76}; 77 78&spi0 { 79 status = "okay"; 80 81 flash@0 { 82 reg = <0>; 83 compatible = "jedec,spi-nor"; 84 spi-max-frequency = <104000000>; 85 m25p,fast-read; 86 partitions { 87 compatible = "fixed-partitions"; 88 #address-cells = <1>; 89 #size-cells = <1>; 90 91 partition@0 { 92 label = "firmware"; 93 reg = <0 0xf0000>; 94 }; 95 96 partition@f0000 { 97 label = "u-boot-env"; 98 reg = <0xf0000 0x8000>; 99 }; 100 101 factory: partition@f8000 { 102 label = "factory"; 103 reg = <0xf8000 0x8000>; 104 read-only; 105 }; 106 107 partition@100000 { 108 label = "dtb"; 109 reg = <0x100000 0x10000>; 110 read-only; 111 }; 112 113 partition@110000 { 114 label = "rescue"; 115 reg = <0x110000 0x1000000>; 116 }; 117 }; 118 }; 119}; 120 121&sdhci1 { 122 wp-inverted; 123 bus-width = <4>; 124 cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; 125 marvell,pad-type = "sd"; 126 no-1-8-v; 127 vqmmc-supply = <&vcc_sd_reg1>; 128 status = "okay"; 129}; 130 131&sdhci0 { 132 bus-width = <8>; 133 mmc-ddr-1_8v; 134 mmc-hs400-1_8v; 135 non-removable; 136 no-sd; 137 no-sdio; 138 marvell,pad-type = "fixed-1-8v"; 139 status = "okay"; 140}; 141 142&usb3 { 143 status = "okay"; 144}; 145 146&usb2 { 147 status = "okay"; 148}; 149 150&uart0 { 151 status = "okay"; 152}; 153 154&mdio { 155 switch0: switch0@1 { 156 compatible = "marvell,mv88e6085"; 157 #address-cells = <1>; 158 #size-cells = <0>; 159 reg = <1>; 160 161 dsa,member = <0 0>; 162 163 ports: ports { 164 #address-cells = <1>; 165 #size-cells = <0>; 166 167 port@0 { 168 reg = <0>; 169 label = "cpu"; 170 ethernet = <ð0>; 171 }; 172 173 port@1 { 174 reg = <1>; 175 label = "wan"; 176 phy-handle = <&switch0phy0>; 177 }; 178 179 port@2 { 180 reg = <2>; 181 label = "lan0"; 182 phy-handle = <&switch0phy1>; 183 184 nvmem-cells = <&macaddr_factory_6>; 185 nvmem-cell-names = "mac-address"; 186 }; 187 188 port@3 { 189 reg = <3>; 190 label = "lan1"; 191 phy-handle = <&switch0phy2>; 192 193 nvmem-cells = <&macaddr_factory_6>; 194 nvmem-cell-names = "mac-address"; 195 }; 196 }; 197 198 mdio { 199 #address-cells = <1>; 200 #size-cells = <0>; 201 202 switch0phy0: switch0phy0@11 { 203 reg = <0x11>; 204 }; 205 switch0phy1: switch0phy1@12 { 206 reg = <0x12>; 207 }; 208 switch0phy2: switch0phy2@13 { 209 reg = <0x13>; 210 }; 211 }; 212 }; 213}; 214 215ð0 { 216 nvmem-cells = <&macaddr_factory_0>; 217 nvmem-cell-names = "mac-address"; 218 phy-mode = "rgmii-id"; 219 status = "okay"; 220 221 fixed-link { 222 speed = <1000>; 223 full-duplex; 224 }; 225}; 226 227&factory { 228 compatible = "nvmem-cells"; 229 #address-cells = <1>; 230 #size-cells = <1>; 231 232 macaddr_factory_0: macaddr@0 { 233 reg = <0x0 0x6>; 234 }; 235 236 macaddr_factory_6: macaddr@6 { 237 reg = <0x6 0x6>; 238 }; 239}; 240