1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree file for ESPRESSObin-Ultra board. 4 * Copyright (C) 2019 Globalscale technologies, Inc. 5 * 6 * Jason Hung <jhung@globalscaletechnologies.com> 7 */ 8 9/dts-v1/; 10 11#include "armada-3720-espressobin.dtsi" 12 13/ { 14 model = "Globalscale Marvell ESPRESSOBin Ultra Board"; 15 compatible = "globalscale,espressobin-ultra", "globalscale,espressobin", 16 "marvell,armada3720", "marvell,armada3700"; 17 18 aliases { 19 /* ethernet1 is WAN port */ 20 ethernet1 = &switch0port5; 21 ethernet2 = &switch0port1; 22 ethernet3 = &switch0port2; 23 ethernet4 = &switch0port3; 24 ethernet5 = &switch0port4; 25 }; 26 27 /delete-node/ regulator; 28 29 reg_usb3_vbus: usb3-vbus { 30 compatible = "regulator-fixed"; 31 regulator-name = "usb3-vbus"; 32 regulator-min-microvolt = <5000000>; 33 regulator-max-microvolt = <5000000>; 34 enable-active-high; 35 gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; 36 }; 37 38 usb3_phy: usb3-phy { 39 compatible = "usb-nop-xceiv"; 40 vcc-supply = <®_usb3_vbus>; 41 }; 42 43 gpio-leds { 44 pinctrl-names = "default"; 45 compatible = "gpio-leds"; 46 /* No assigned functions to the LEDs by default */ 47 led1 { 48 label = "ebin-ultra:blue:led1"; 49 gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; 50 }; 51 led2 { 52 label = "ebin-ultra:green:led2"; 53 gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; 54 }; 55 led3 { 56 label = "ebin-ultra:red:led3"; 57 gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; 58 }; 59 led4 { 60 label = "ebin-ultra:yellow:led4"; 61 gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; 62 }; 63 }; 64}; 65 66&sdhci0 { 67 status = "okay"; 68}; 69 70&sdhci1 { 71 /delete-property/ vqmmc-supply; 72 status = "disabled"; 73}; 74 75&spi0 { 76 flash@0 { 77 partitions { 78 compatible = "fixed-partitions"; 79 #address-cells = <1>; 80 #size-cells = <1>; 81 82 partition@0 { 83 label = "firmware"; 84 reg = <0x0 0x3e0000>; 85 }; 86 partition@3e0000 { 87 label = "hw-info"; 88 reg = <0x3e0000 0x10000>; 89 read-only; 90 }; 91 partition@3f0000 { 92 label = "u-boot-env"; 93 reg = <0x3f0000 0x10000>; 94 }; 95 }; 96 }; 97}; 98 99&i2c0 { 100 status = "okay"; 101 pinctrl-names = "default"; 102 pinctrl-0 = <&i2c1_pins>; 103 104 clock-frequency = <100000>; 105 106 rtc@51 { 107 compatible = "nxp,pcf8563"; 108 reg = <0x51>; 109 }; 110}; 111 112&usb3 { 113 usb-phy = <&usb3_phy>; 114}; 115 116&mdio { 117 extphy: ethernet-phy@1 { 118 reg = <1>; 119 120 reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; 121 }; 122}; 123 124&switch0 { 125 reg = <3>; 126 127 reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; 128 129 ethernet-ports { 130 switch0port1: ethernet-port@1 { 131 reg = <1>; 132 label = "lan0"; 133 phy-handle = <&switch0phy0>; 134 }; 135 136 switch0port2: ethernet-port@2 { 137 reg = <2>; 138 label = "lan1"; 139 phy-handle = <&switch0phy1>; 140 }; 141 142 switch0port3: ethernet-port@3 { 143 reg = <3>; 144 label = "lan2"; 145 phy-handle = <&switch0phy2>; 146 }; 147 148 switch0port4: ethernet-port@4 { 149 reg = <4>; 150 label = "lan3"; 151 phy-handle = <&switch0phy3>; 152 }; 153 154 switch0port5: ethernet-port@5 { 155 reg = <5>; 156 label = "wan"; 157 phy-handle = <&extphy>; 158 phy-mode = "sgmii"; 159 }; 160 }; 161 162 mdio { 163 switch0phy3: ethernet-phy@14 { 164 reg = <0x14>; 165 }; 166 }; 167}; 168