1// SPDX-License-Identifier: GPL-2.0 2/* 3 * DTS File for HiSilicon Poplar Development Board 4 * 5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/gpio/gpio.h> 11#include "hi3798cv200.dtsi" 12#include "poplar-pinctrl.dtsi" 13 14/ { 15 model = "HiSilicon Poplar Development Board"; 16 compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; 17 18 aliases { 19 serial0 = &uart0; 20 serial2 = &uart2; 21 }; 22 23 chosen { 24 stdout-path = "serial0:115200n8"; 25 }; 26 27 memory@0 { 28 device_type = "memory"; 29 reg = <0x0 0x0 0x0 0x80000000>; 30 }; 31 32 leds { 33 compatible = "gpio-leds"; 34 35 user-led0 { 36 label = "green:user1"; 37 gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; 38 linux,default-trigger = "heartbeat"; 39 default-state = "off"; 40 }; 41 42 user-led1 { 43 label = "green:user2"; 44 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; 45 linux,default-trigger = "mmc0"; 46 default-state = "off"; 47 }; 48 49 user-led2 { 50 label = "green:user3"; 51 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 52 linux,default-trigger = "mmc1"; 53 default-state = "off"; 54 }; 55 56 user-led3 { 57 label = "green:user4"; 58 gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; 59 linux,default-trigger = "none"; 60 panic-indicator; 61 default-state = "off"; 62 }; 63 }; 64 65 reg_pcie: regulator-pcie { 66 compatible = "regulator-fixed"; 67 regulator-name = "3V3_PCIE0"; 68 regulator-min-microvolt = <3300000>; 69 regulator-max-microvolt = <3300000>; 70 gpio = <&gpio6 7 0>; 71 enable-active-high; 72 }; 73}; 74 75&ehci { 76 status = "okay"; 77}; 78 79&emmc { 80 pinctrl-names = "default"; 81 pinctrl-0 = <&emmc_pins_1 &emmc_pins_2 82 &emmc_pins_3 &emmc_pins_4>; 83 fifo-depth = <256>; 84 clock-frequency = <200000000>; 85 cap-mmc-highspeed; 86 mmc-ddr-1_8v; 87 mmc-hs200-1_8v; 88 non-removable; 89 bus-width = <8>; 90 status = "okay"; 91}; 92 93&gmac1 { 94 status = "okay"; 95 #address-cells = <1>; 96 #size-cells = <0>; 97 phy-handle = <ð_phy1>; 98 phy-mode = "rgmii"; 99 hisilicon,phy-reset-delays-us = <10000 10000 30000>; 100 101 eth_phy1: phy@3 { 102 reg = <3>; 103 }; 104}; 105 106&gpio1 { 107 status = "okay"; 108 gpio-line-names = "GPIO-E", "", 109 "", "", 110 "", "GPIO-F", 111 "", "GPIO-J"; 112}; 113 114&gpio2 { 115 status = "okay"; 116 gpio-line-names = "GPIO-H", "GPIO-I", 117 "GPIO-L", "GPIO-G", 118 "GPIO-K", "", 119 "", ""; 120}; 121 122&gpio3 { 123 status = "okay"; 124 gpio-line-names = "", "", 125 "", "", 126 "GPIO-C", "", 127 "", "GPIO-B"; 128}; 129 130&gpio4 { 131 status = "okay"; 132 gpio-line-names = "", "", 133 "", "", 134 "", "GPIO-D", 135 "", ""; 136}; 137 138&gpio5 { 139 status = "okay"; 140 gpio-line-names = "", "USER-LED-1", 141 "USER-LED-2", "", 142 "", "GPIO-A", 143 "", ""; 144}; 145 146&gpio6 { 147 status = "okay"; 148 gpio-line-names = "", "", 149 "", "USER-LED-0", 150 "", "", 151 "", ""; 152}; 153 154&gpio10 { 155 status = "okay"; 156 gpio-line-names = "", "", 157 "", "", 158 "", "", 159 "USER-LED-3", ""; 160}; 161 162&i2c0 { 163 status = "okay"; 164 label = "LS-I2C0"; 165}; 166 167&i2c2 { 168 status = "okay"; 169 label = "LS-I2C1"; 170}; 171 172&ir { 173 linux,rc-map-name = "rc-hisi-poplar"; 174 status = "okay"; 175}; 176 177&ohci { 178 status = "okay"; 179}; 180 181&pcie { 182 reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; 183 vpcie-supply = <®_pcie>; 184 status = "okay"; 185}; 186 187&sd0 { 188 bus-width = <4>; 189 cap-sd-highspeed; 190 status = "okay"; 191}; 192 193&spi0 { 194 status = "okay"; 195 label = "LS-SPI0"; 196}; 197 198&uart0 { 199 status = "okay"; 200}; 201 202&uart2 { 203 status = "okay"; 204 label = "LS-UART0"; 205}; 206/* No optional LS-UART1 on Low Speed Expansion Connector. */ 207