xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/imx8qxp-mek.dts (revision 8d13bc63c0e1d50bc9e47ac1f26329c999bfecf0) 
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2017~2018 NXP
4 */
5
6/dts-v1/;
7
8#include "imx8qxp.dtsi"
9#include <dt-bindings/usb/pd.h>
10
11/ {
12	model = "Freescale i.MX8QXP MEK";
13	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
14
15	chosen {
16		stdout-path = &lpuart0;
17	};
18
19	memory@80000000 {
20		device_type = "memory";
21		reg = <0x00000000 0x80000000 0 0x40000000>;
22	};
23
24	reg_usdhc2_vmmc: usdhc2-vmmc {
25		compatible = "regulator-fixed";
26		regulator-name = "SD1_SPWR";
27		regulator-min-microvolt = <3000000>;
28		regulator-max-microvolt = <3000000>;
29		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
30		enable-active-high;
31	};
32
33	gpio-sbu-mux {
34		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
35		pinctrl-names = "default";
36		pinctrl-0 = <&pinctrl_typec_mux>;
37		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
38		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
39		orientation-switch;
40
41		port {
42			usb3_data_ss: endpoint {
43				remote-endpoint = <&typec_con_ss>;
44			};
45		};
46	};
47};
48
49&dsp {
50	status = "okay";
51};
52
53&dsp_reserved {
54	status = "okay";
55};
56
57&fec1 {
58	pinctrl-names = "default";
59	pinctrl-0 = <&pinctrl_fec1>;
60	phy-mode = "rgmii-id";
61	phy-handle = <&ethphy0>;
62	fsl,magic-packet;
63	status = "okay";
64
65	mdio {
66		#address-cells = <1>;
67		#size-cells = <0>;
68
69		ethphy0: ethernet-phy@0 {
70			compatible = "ethernet-phy-ieee802.3-c22";
71			reg = <0>;
72		};
73	};
74};
75
76&i2c1 {
77	#address-cells = <1>;
78	#size-cells = <0>;
79	clock-frequency = <100000>;
80	pinctrl-names = "default";
81	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
82	status = "okay";
83
84	i2c-mux@71 {
85		compatible = "nxp,pca9646", "nxp,pca9546";
86		#address-cells = <1>;
87		#size-cells = <0>;
88		reg = <0x71>;
89		reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>;
90
91		i2c@0 {
92			#address-cells = <1>;
93			#size-cells = <0>;
94			reg = <0>;
95
96			max7322: gpio@68 {
97				compatible = "maxim,max7322";
98				reg = <0x68>;
99				gpio-controller;
100				#gpio-cells = <2>;
101			};
102		};
103
104		i2c@1 {
105			#address-cells = <1>;
106			#size-cells = <0>;
107			reg = <1>;
108		};
109
110		i2c@2 {
111			#address-cells = <1>;
112			#size-cells = <0>;
113			reg = <2>;
114
115			pressure-sensor@60 {
116				compatible = "fsl,mpl3115";
117				reg = <0x60>;
118			};
119		};
120
121		i2c@3 {
122			#address-cells = <1>;
123			#size-cells = <0>;
124			reg = <3>;
125
126			pca9557_a: gpio@1a {
127				compatible = "nxp,pca9557";
128				reg = <0x1a>;
129				gpio-controller;
130				#gpio-cells = <2>;
131			};
132
133			pca9557_b: gpio@1d {
134				compatible = "nxp,pca9557";
135				reg = <0x1d>;
136				gpio-controller;
137				#gpio-cells = <2>;
138			};
139
140			light-sensor@44 {
141				pinctrl-names = "default";
142				pinctrl-0 = <&pinctrl_isl29023>;
143				compatible = "isil,isl29023";
144				reg = <0x44>;
145				interrupt-parent = <&lsio_gpio1>;
146				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
147			};
148		};
149	};
150
151	ptn5110: tcpc@50 {
152		compatible = "nxp,ptn5110";
153		pinctrl-names = "default";
154		pinctrl-0 = <&pinctrl_typec>;
155		reg = <0x50>;
156		interrupt-parent = <&lsio_gpio1>;
157		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
158
159		usb_con1: connector {
160			compatible = "usb-c-connector";
161			label = "USB-C";
162			power-role = "source";
163			data-role = "dual";
164			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
165
166			ports {
167				#address-cells = <1>;
168				#size-cells = <0>;
169
170				port@0 {
171					reg = <0>;
172
173					typec_dr_sw: endpoint {
174						remote-endpoint = <&usb3_drd_sw>;
175					};
176				};
177
178				port@1 {
179					reg = <1>;
180
181					typec_con_ss: endpoint {
182						remote-endpoint = <&usb3_data_ss>;
183					};
184				};
185			};
186		};
187	};
188
189};
190
191&lpuart0 {
192	pinctrl-names = "default";
193	pinctrl-0 = <&pinctrl_lpuart0>;
194	status = "okay";
195};
196
197&lpuart2 {
198	pinctrl-names = "default";
199	pinctrl-0 = <&pinctrl_lpuart2>;
200	status = "okay";
201};
202
203&lpuart3 {
204	pinctrl-names = "default";
205	pinctrl-0 = <&pinctrl_lpuart3>;
206	status = "okay";
207};
208
209&mu_m0 {
210	status = "okay";
211};
212
213&mu1_m0 {
214	status = "okay";
215};
216
217&scu_key {
218	status = "okay";
219};
220
221&thermal_zones {
222	pmic-thermal {
223		polling-delay-passive = <250>;
224		polling-delay = <2000>;
225		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
226
227		trips {
228			pmic_alert0: trip0 {
229				temperature = <110000>;
230				hysteresis = <2000>;
231				type = "passive";
232			};
233
234			pmic_crit0: trip1 {
235				temperature = <125000>;
236				hysteresis = <2000>;
237				type = "critical";
238			};
239		};
240
241		cooling-maps {
242			map0 {
243				trip = <&pmic_alert0>;
244				cooling-device =
245					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
246					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
247					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
248					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
249			};
250		};
251	};
252};
253
254&usdhc1 {
255	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
256	assigned-clock-rates = <200000000>;
257	pinctrl-names = "default";
258	pinctrl-0 = <&pinctrl_usdhc1>;
259	bus-width = <8>;
260	no-sd;
261	no-sdio;
262	non-removable;
263	status = "okay";
264};
265
266&usdhc2 {
267	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
268	assigned-clock-rates = <200000000>;
269	pinctrl-names = "default";
270	pinctrl-0 = <&pinctrl_usdhc2>;
271	bus-width = <4>;
272	vmmc-supply = <&reg_usdhc2_vmmc>;
273	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
274	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
275	status = "okay";
276};
277
278&usb3_phy {
279	status = "okay";
280};
281
282&usbotg3 {
283	status = "okay";
284};
285
286&usbotg3_cdns3 {
287	dr_mode = "otg";
288	usb-role-switch;
289	status = "okay";
290
291	port {
292		usb3_drd_sw: endpoint {
293			remote-endpoint = <&typec_dr_sw>;
294		};
295	};
296};
297
298
299&vpu {
300	compatible = "nxp,imx8qxp-vpu";
301	status = "okay";
302};
303
304&vpu_core0 {
305	reg = <0x2d040000 0x10000>;
306	memory-region = <&decoder_boot>, <&decoder_rpc>;
307	status = "okay";
308};
309
310&vpu_core1 {
311	reg = <0x2d050000 0x10000>;
312	memory-region = <&encoder_boot>, <&encoder_rpc>;
313	status = "okay";
314};
315
316&iomuxc {
317	pinctrl_fec1: fec1grp {
318		fsl,pins = <
319			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
320			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
321			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
322			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
323			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
324			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
325			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
326			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
327			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
328			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
329			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
330			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
331			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
332			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
333		>;
334	};
335
336	pinctrl_ioexp_rst: ioexprstgrp {
337		fsl,pins = <
338			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
339		>;
340	};
341
342	pinctrl_isl29023: isl29023grp {
343		fsl,pins = <
344			IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02			0x00000021
345		>;
346	};
347
348	pinctrl_lpi2c1: lpi2c1grp {
349		fsl,pins = <
350			IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL			0x06000021
351			IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA			0x06000021
352		>;
353	};
354
355	pinctrl_lpuart0: lpuart0grp {
356		fsl,pins = <
357			IMX8QXP_UART0_RX_ADMA_UART0_RX				0x06000020
358			IMX8QXP_UART0_TX_ADMA_UART0_TX				0x06000020
359		>;
360	};
361
362	pinctrl_lpuart2: lpuart2grp {
363		fsl,pins = <
364			IMX8QXP_UART2_TX_ADMA_UART2_TX          0x06000020
365			IMX8QXP_UART2_RX_ADMA_UART2_RX          0x06000020
366		>;
367	};
368
369	pinctrl_lpuart3: lpuart3grp {
370		fsl,pins = <
371			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX       0x06000020
372			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX       0x06000020
373		>;
374	};
375
376	pinctrl_typec: typecgrp {
377		fsl,pins = <
378			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
379		>;
380	};
381
382	pinctrl_typec_mux: typecmuxgrp {
383		fsl,pins = <
384			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
385		>;
386	};
387
388	pinctrl_usdhc1: usdhc1grp {
389		fsl,pins = <
390			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
391			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
392			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
393			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
394			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
395			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
396			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
397			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
398			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
399			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
400			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
401		>;
402	};
403
404	pinctrl_usdhc2: usdhc2grp {
405		fsl,pins = <
406			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
407			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
408			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
409			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
410			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
411			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
412			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
413		>;
414	};
415};
416