xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/imx8qxp-mek.dts (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2017~2018 NXP
4 */
5
6/dts-v1/;
7
8#include "imx8qxp.dtsi"
9#include <dt-bindings/usb/pd.h>
10
11/ {
12	model = "Freescale i.MX8QXP MEK";
13	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
14
15	chosen {
16		stdout-path = &lpuart0;
17	};
18
19	memory@80000000 {
20		device_type = "memory";
21		reg = <0x00000000 0x80000000 0 0x40000000>;
22	};
23
24	reg_usdhc2_vmmc: usdhc2-vmmc {
25		compatible = "regulator-fixed";
26		regulator-name = "SD1_SPWR";
27		regulator-min-microvolt = <3000000>;
28		regulator-max-microvolt = <3000000>;
29		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
30		enable-active-high;
31	};
32
33	gpio-sbu-mux {
34		compatible = "gpio-sbu-mux";
35		pinctrl-names = "default";
36		pinctrl-0 = <&pinctrl_typec_mux>;
37		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
38		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
39		orientation-switch;
40
41		port {
42			usb3_data_ss: endpoint {
43				remote-endpoint = <&typec_con_ss>;
44			};
45		};
46	};
47};
48
49&dsp {
50	status = "okay";
51};
52
53&fec1 {
54	pinctrl-names = "default";
55	pinctrl-0 = <&pinctrl_fec1>;
56	phy-mode = "rgmii-id";
57	phy-handle = <&ethphy0>;
58	fsl,magic-packet;
59	status = "okay";
60
61	mdio {
62		#address-cells = <1>;
63		#size-cells = <0>;
64
65		ethphy0: ethernet-phy@0 {
66			compatible = "ethernet-phy-ieee802.3-c22";
67			reg = <0>;
68		};
69	};
70};
71
72&i2c1 {
73	#address-cells = <1>;
74	#size-cells = <0>;
75	clock-frequency = <100000>;
76	pinctrl-names = "default";
77	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
78	status = "okay";
79
80	i2c-mux@71 {
81		compatible = "nxp,pca9646", "nxp,pca9546";
82		#address-cells = <1>;
83		#size-cells = <0>;
84		reg = <0x71>;
85		reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>;
86
87		i2c@0 {
88			#address-cells = <1>;
89			#size-cells = <0>;
90			reg = <0>;
91
92			max7322: gpio@68 {
93				compatible = "maxim,max7322";
94				reg = <0x68>;
95				gpio-controller;
96				#gpio-cells = <2>;
97			};
98		};
99
100		i2c@1 {
101			#address-cells = <1>;
102			#size-cells = <0>;
103			reg = <1>;
104		};
105
106		i2c@2 {
107			#address-cells = <1>;
108			#size-cells = <0>;
109			reg = <2>;
110
111			pressure-sensor@60 {
112				compatible = "fsl,mpl3115";
113				reg = <0x60>;
114			};
115		};
116
117		i2c@3 {
118			#address-cells = <1>;
119			#size-cells = <0>;
120			reg = <3>;
121
122			pca9557_a: gpio@1a {
123				compatible = "nxp,pca9557";
124				reg = <0x1a>;
125				gpio-controller;
126				#gpio-cells = <2>;
127			};
128
129			pca9557_b: gpio@1d {
130				compatible = "nxp,pca9557";
131				reg = <0x1d>;
132				gpio-controller;
133				#gpio-cells = <2>;
134			};
135
136			light-sensor@44 {
137				pinctrl-names = "default";
138				pinctrl-0 = <&pinctrl_isl29023>;
139				compatible = "isil,isl29023";
140				reg = <0x44>;
141				interrupt-parent = <&lsio_gpio1>;
142				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
143			};
144		};
145	};
146
147	ptn5110: tcpc@50 {
148		compatible = "nxp,ptn5110";
149		pinctrl-names = "default";
150		pinctrl-0 = <&pinctrl_typec>;
151		reg = <0x50>;
152		interrupt-parent = <&lsio_gpio1>;
153		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
154
155		port {
156			typec_dr_sw: endpoint {
157				remote-endpoint = <&usb3_drd_sw>;
158			};
159		};
160
161		usb_con1: connector {
162			compatible = "usb-c-connector";
163			label = "USB-C";
164			power-role = "source";
165			data-role = "dual";
166			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
167
168			ports {
169				#address-cells = <1>;
170				#size-cells = <0>;
171
172				port@1 {
173					reg = <1>;
174					typec_con_ss: endpoint {
175						remote-endpoint = <&usb3_data_ss>;
176					};
177				};
178			};
179		};
180	};
181
182};
183
184&lpuart0 {
185	pinctrl-names = "default";
186	pinctrl-0 = <&pinctrl_lpuart0>;
187	status = "okay";
188};
189
190&mu_m0 {
191	status = "okay";
192};
193
194&mu1_m0 {
195	status = "okay";
196};
197
198&scu_key {
199	status = "okay";
200};
201
202&thermal_zones {
203	pmic-thermal {
204		polling-delay-passive = <250>;
205		polling-delay = <2000>;
206		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
207
208		trips {
209			pmic_alert0: trip0 {
210				temperature = <110000>;
211				hysteresis = <2000>;
212				type = "passive";
213			};
214
215			pmic_crit0: trip1 {
216				temperature = <125000>;
217				hysteresis = <2000>;
218				type = "critical";
219			};
220		};
221
222		cooling-maps {
223			map0 {
224				trip = <&pmic_alert0>;
225				cooling-device =
226					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
227					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
228					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
229					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
230			};
231		};
232	};
233};
234
235&usdhc1 {
236	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
237	assigned-clock-rates = <200000000>;
238	pinctrl-names = "default";
239	pinctrl-0 = <&pinctrl_usdhc1>;
240	bus-width = <8>;
241	no-sd;
242	no-sdio;
243	non-removable;
244	status = "okay";
245};
246
247&usdhc2 {
248	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
249	assigned-clock-rates = <200000000>;
250	pinctrl-names = "default";
251	pinctrl-0 = <&pinctrl_usdhc2>;
252	bus-width = <4>;
253	vmmc-supply = <&reg_usdhc2_vmmc>;
254	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
255	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
256	status = "okay";
257};
258
259&usb3_phy {
260	status = "okay";
261};
262
263&usbotg3 {
264	status = "okay";
265};
266
267&usbotg3_cdns3 {
268	dr_mode = "otg";
269	usb-role-switch;
270	status = "okay";
271
272	port {
273		usb3_drd_sw: endpoint {
274			remote-endpoint = <&typec_dr_sw>;
275		};
276	};
277};
278
279
280&vpu {
281	compatible = "nxp,imx8qxp-vpu";
282	status = "okay";
283};
284
285&vpu_core0 {
286	reg = <0x2d040000 0x10000>;
287	memory-region = <&decoder_boot>, <&decoder_rpc>;
288	status = "okay";
289};
290
291&vpu_core1 {
292	reg = <0x2d050000 0x10000>;
293	memory-region = <&encoder_boot>, <&encoder_rpc>;
294	status = "okay";
295};
296
297&iomuxc {
298	pinctrl_fec1: fec1grp {
299		fsl,pins = <
300			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
301			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
302			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
303			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
304			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
305			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
306			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
307			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
308			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
309			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
310			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
311			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
312			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
313			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
314		>;
315	};
316
317	pinctrl_ioexp_rst: ioexprstgrp {
318		fsl,pins = <
319			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
320		>;
321	};
322
323	pinctrl_isl29023: isl29023grp {
324		fsl,pins = <
325			IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02			0x00000021
326		>;
327	};
328
329	pinctrl_lpi2c1: lpi2c1grp {
330		fsl,pins = <
331			IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL			0x06000021
332			IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA			0x06000021
333		>;
334	};
335
336	pinctrl_lpuart0: lpuart0grp {
337		fsl,pins = <
338			IMX8QXP_UART0_RX_ADMA_UART0_RX				0x06000020
339			IMX8QXP_UART0_TX_ADMA_UART0_TX				0x06000020
340		>;
341	};
342
343	pinctrl_typec: typecgrp {
344		fsl,pins = <
345			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
346		>;
347	};
348
349	pinctrl_typec_mux: typecmuxgrp {
350		fsl,pins = <
351			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
352		>;
353	};
354
355	pinctrl_usdhc1: usdhc1grp {
356		fsl,pins = <
357			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
358			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
359			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
360			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
361			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
362			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
363			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
364			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
365			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
366			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
367			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
368		>;
369	};
370
371	pinctrl_usdhc2: usdhc2grp {
372		fsl,pins = <
373			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
374			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
375			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
376			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
377			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
378			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
379			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
380		>;
381	};
382};
383