xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/imx8mq.dtsi (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2017 NXP
4 * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
5 */
6
7#include <dt-bindings/clock/imx8mq-clock.h>
8#include <dt-bindings/power/imx8mq-power.h>
9#include <dt-bindings/reset/imx8mq-reset.h>
10#include <dt-bindings/gpio/gpio.h>
11#include "dt-bindings/input/input.h"
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/thermal/thermal.h>
14#include <dt-bindings/interconnect/imx8mq.h>
15#include "imx8mq-pinfunc.h"
16
17/ {
18	interrupt-parent = <&gpc>;
19
20	#address-cells = <2>;
21	#size-cells = <2>;
22
23	aliases {
24		ethernet0 = &fec1;
25		gpio0 = &gpio1;
26		gpio1 = &gpio2;
27		gpio2 = &gpio3;
28		gpio3 = &gpio4;
29		gpio4 = &gpio5;
30		i2c0 = &i2c1;
31		i2c1 = &i2c2;
32		i2c2 = &i2c3;
33		i2c3 = &i2c4;
34		mmc0 = &usdhc1;
35		mmc1 = &usdhc2;
36		serial0 = &uart1;
37		serial1 = &uart2;
38		serial2 = &uart3;
39		serial3 = &uart4;
40		spi0 = &ecspi1;
41		spi1 = &ecspi2;
42		spi2 = &ecspi3;
43	};
44
45	ckil: clock-ckil {
46		compatible = "fixed-clock";
47		#clock-cells = <0>;
48		clock-frequency = <32768>;
49		clock-output-names = "ckil";
50	};
51
52	osc_25m: clock-osc-25m {
53		compatible = "fixed-clock";
54		#clock-cells = <0>;
55		clock-frequency = <25000000>;
56		clock-output-names = "osc_25m";
57	};
58
59	osc_27m: clock-osc-27m {
60		compatible = "fixed-clock";
61		#clock-cells = <0>;
62		clock-frequency = <27000000>;
63		clock-output-names = "osc_27m";
64	};
65
66	hdmi_phy_27m: clock-hdmi-phy-27m {
67		compatible = "fixed-clock";
68		#clock-cells = <0>;
69		clock-frequency = <27000000>;
70		clock-output-names = "hdmi_phy_27m";
71	};
72
73	clk_ext1: clock-ext1 {
74		compatible = "fixed-clock";
75		#clock-cells = <0>;
76		clock-frequency = <133000000>;
77		clock-output-names = "clk_ext1";
78	};
79
80	clk_ext2: clock-ext2 {
81		compatible = "fixed-clock";
82		#clock-cells = <0>;
83		clock-frequency = <133000000>;
84		clock-output-names = "clk_ext2";
85	};
86
87	clk_ext3: clock-ext3 {
88		compatible = "fixed-clock";
89		#clock-cells = <0>;
90		clock-frequency = <133000000>;
91		clock-output-names = "clk_ext3";
92	};
93
94	clk_ext4: clock-ext4 {
95		compatible = "fixed-clock";
96		#clock-cells = <0>;
97		clock-frequency = <133000000>;
98		clock-output-names = "clk_ext4";
99	};
100
101	cpus {
102		#address-cells = <1>;
103		#size-cells = <0>;
104
105		A53_0: cpu@0 {
106			device_type = "cpu";
107			compatible = "arm,cortex-a53";
108			reg = <0x0>;
109			clock-latency = <61036>; /* two CLK32 periods */
110			clocks = <&clk IMX8MQ_CLK_ARM>;
111			enable-method = "psci";
112			i-cache-size = <0x8000>;
113			i-cache-line-size = <64>;
114			i-cache-sets = <256>;
115			d-cache-size = <0x8000>;
116			d-cache-line-size = <64>;
117			d-cache-sets = <128>;
118			next-level-cache = <&A53_L2>;
119			operating-points-v2 = <&a53_opp_table>;
120			#cooling-cells = <2>;
121			nvmem-cells = <&cpu_speed_grade>;
122			nvmem-cell-names = "speed_grade";
123		};
124
125		A53_1: cpu@1 {
126			device_type = "cpu";
127			compatible = "arm,cortex-a53";
128			reg = <0x1>;
129			clock-latency = <61036>; /* two CLK32 periods */
130			clocks = <&clk IMX8MQ_CLK_ARM>;
131			enable-method = "psci";
132			i-cache-size = <0x8000>;
133			i-cache-line-size = <64>;
134			i-cache-sets = <256>;
135			d-cache-size = <0x8000>;
136			d-cache-line-size = <64>;
137			d-cache-sets = <128>;
138			next-level-cache = <&A53_L2>;
139			operating-points-v2 = <&a53_opp_table>;
140			#cooling-cells = <2>;
141		};
142
143		A53_2: cpu@2 {
144			device_type = "cpu";
145			compatible = "arm,cortex-a53";
146			reg = <0x2>;
147			clock-latency = <61036>; /* two CLK32 periods */
148			clocks = <&clk IMX8MQ_CLK_ARM>;
149			enable-method = "psci";
150			i-cache-size = <0x8000>;
151			i-cache-line-size = <64>;
152			i-cache-sets = <256>;
153			d-cache-size = <0x8000>;
154			d-cache-line-size = <64>;
155			d-cache-sets = <128>;
156			next-level-cache = <&A53_L2>;
157			operating-points-v2 = <&a53_opp_table>;
158			#cooling-cells = <2>;
159		};
160
161		A53_3: cpu@3 {
162			device_type = "cpu";
163			compatible = "arm,cortex-a53";
164			reg = <0x3>;
165			clock-latency = <61036>; /* two CLK32 periods */
166			clocks = <&clk IMX8MQ_CLK_ARM>;
167			enable-method = "psci";
168			i-cache-size = <0x8000>;
169			i-cache-line-size = <64>;
170			i-cache-sets = <256>;
171			d-cache-size = <0x8000>;
172			d-cache-line-size = <64>;
173			d-cache-sets = <128>;
174			next-level-cache = <&A53_L2>;
175			operating-points-v2 = <&a53_opp_table>;
176			#cooling-cells = <2>;
177		};
178
179		A53_L2: l2-cache0 {
180			compatible = "cache";
181			cache-level = <2>;
182			cache-unified;
183			cache-size = <0x100000>;
184			cache-line-size = <64>;
185			cache-sets = <1024>;
186		};
187	};
188
189	a53_opp_table: opp-table {
190		compatible = "operating-points-v2";
191		opp-shared;
192
193		opp-800000000 {
194			opp-hz = /bits/ 64 <800000000>;
195			opp-microvolt = <900000>;
196			/* Industrial only */
197			opp-supported-hw = <0xf>, <0x4>;
198			clock-latency-ns = <150000>;
199			opp-suspend;
200		};
201
202		opp-1000000000 {
203			opp-hz = /bits/ 64 <1000000000>;
204			opp-microvolt = <900000>;
205			/* Consumer only */
206			opp-supported-hw = <0xe>, <0x3>;
207			clock-latency-ns = <150000>;
208			opp-suspend;
209		};
210
211		opp-1300000000 {
212			opp-hz = /bits/ 64 <1300000000>;
213			opp-microvolt = <1000000>;
214			opp-supported-hw = <0xc>, <0x4>;
215			clock-latency-ns = <150000>;
216			opp-suspend;
217		};
218
219		opp-1500000000 {
220			opp-hz = /bits/ 64 <1500000000>;
221			opp-microvolt = <1000000>;
222			opp-supported-hw = <0x8>, <0x3>;
223			clock-latency-ns = <150000>;
224			opp-suspend;
225		};
226	};
227
228	pmu {
229		compatible = "arm,cortex-a53-pmu";
230		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
231		interrupt-parent = <&gic>;
232	};
233
234	psci {
235		compatible = "arm,psci-1.0";
236		method = "smc";
237	};
238
239	thermal-zones {
240		cpu_thermal: cpu-thermal {
241			polling-delay-passive = <250>;
242			polling-delay = <2000>;
243			thermal-sensors = <&tmu 0>;
244
245			trips {
246				cpu_alert: cpu-alert {
247					temperature = <80000>;
248					hysteresis = <2000>;
249					type = "passive";
250				};
251
252				cpu-crit {
253					temperature = <90000>;
254					hysteresis = <2000>;
255					type = "critical";
256				};
257			};
258
259			cooling-maps {
260				map0 {
261					trip = <&cpu_alert>;
262					cooling-device =
263						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
264						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
265						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
266						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
267				};
268			};
269		};
270
271		gpu-thermal {
272			polling-delay-passive = <250>;
273			polling-delay = <2000>;
274			thermal-sensors = <&tmu 1>;
275
276			trips {
277				gpu_alert: gpu-alert {
278					temperature = <80000>;
279					hysteresis = <2000>;
280					type = "passive";
281				};
282
283				gpu-crit {
284					temperature = <90000>;
285					hysteresis = <2000>;
286					type = "critical";
287				};
288			};
289
290			cooling-maps {
291				map0 {
292					trip = <&gpu_alert>;
293					cooling-device =
294						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
295				};
296			};
297		};
298
299		vpu-thermal {
300			polling-delay-passive = <250>;
301			polling-delay = <2000>;
302			thermal-sensors = <&tmu 2>;
303
304			trips {
305				vpu-crit {
306					temperature = <90000>;
307					hysteresis = <2000>;
308					type = "critical";
309				};
310			};
311		};
312	};
313
314	timer {
315		compatible = "arm,armv8-timer";
316		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
317		             <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
318		             <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
319		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
320		interrupt-parent = <&gic>;
321		arm,no-tick-in-suspend;
322	};
323
324	soc: soc@0 {
325		compatible = "fsl,imx8mq-soc", "simple-bus";
326		#address-cells = <1>;
327		#size-cells = <1>;
328		ranges = <0x0 0x0 0x0 0x3e000000>;
329		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
330		nvmem-cells = <&imx8mq_uid>;
331		nvmem-cell-names = "soc_unique_id";
332
333		aips1: bus@30000000 { /* AIPS1 */
334			compatible = "fsl,aips-bus", "simple-bus";
335			reg = <0x30000000 0x400000>;
336			#address-cells = <1>;
337			#size-cells = <1>;
338			ranges = <0x30000000 0x30000000 0x400000>;
339
340			sai1: sai@30010000 {
341				#sound-dai-cells = <0>;
342				compatible = "fsl,imx8mq-sai";
343				reg = <0x30010000 0x10000>;
344				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
345				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
346				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
347				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
348				clock-names = "bus", "mclk1", "mclk2", "mclk3";
349				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
350				dma-names = "rx", "tx";
351				status = "disabled";
352			};
353
354			sai6: sai@30030000 {
355				#sound-dai-cells = <0>;
356				compatible = "fsl,imx8mq-sai";
357				reg = <0x30030000 0x10000>;
358				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
359				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
360				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
361				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
362				clock-names = "bus", "mclk1", "mclk2", "mclk3";
363				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
364				dma-names = "rx", "tx";
365				status = "disabled";
366			};
367
368			sai5: sai@30040000 {
369				#sound-dai-cells = <0>;
370				compatible = "fsl,imx8mq-sai";
371				reg = <0x30040000 0x10000>;
372				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
373				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
374				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
375				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
376				clock-names = "bus", "mclk1", "mclk2", "mclk3";
377				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
378				dma-names = "rx", "tx";
379				status = "disabled";
380			};
381
382			sai4: sai@30050000 {
383				#sound-dai-cells = <0>;
384				compatible = "fsl,imx8mq-sai";
385				reg = <0x30050000 0x10000>;
386				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
387				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
388				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
389				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
390				clock-names = "bus", "mclk1", "mclk2", "mclk3";
391				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
392				dma-names = "rx", "tx";
393				status = "disabled";
394			};
395
396			gpio1: gpio@30200000 {
397				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
398				reg = <0x30200000 0x10000>;
399				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
400				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
401				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
402				gpio-controller;
403				#gpio-cells = <2>;
404				interrupt-controller;
405				#interrupt-cells = <2>;
406				gpio-ranges = <&iomuxc 0 10 30>;
407			};
408
409			gpio2: gpio@30210000 {
410				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
411				reg = <0x30210000 0x10000>;
412				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
413				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
414				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
415				gpio-controller;
416				#gpio-cells = <2>;
417				interrupt-controller;
418				#interrupt-cells = <2>;
419				gpio-ranges = <&iomuxc 0 40 21>;
420			};
421
422			gpio3: gpio@30220000 {
423				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
424				reg = <0x30220000 0x10000>;
425				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
426				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
427				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
428				gpio-controller;
429				#gpio-cells = <2>;
430				interrupt-controller;
431				#interrupt-cells = <2>;
432				gpio-ranges = <&iomuxc 0 61 26>;
433			};
434
435			gpio4: gpio@30230000 {
436				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
437				reg = <0x30230000 0x10000>;
438				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
439				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
440				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
441				gpio-controller;
442				#gpio-cells = <2>;
443				interrupt-controller;
444				#interrupt-cells = <2>;
445				gpio-ranges = <&iomuxc 0 87 32>;
446			};
447
448			gpio5: gpio@30240000 {
449				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
450				reg = <0x30240000 0x10000>;
451				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
452				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
453				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
454				gpio-controller;
455				#gpio-cells = <2>;
456				interrupt-controller;
457				#interrupt-cells = <2>;
458				gpio-ranges = <&iomuxc 0 119 30>;
459			};
460
461			tmu: tmu@30260000 {
462				compatible = "fsl,imx8mq-tmu";
463				reg = <0x30260000 0x10000>;
464				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
465				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
466				little-endian;
467				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
468				fsl,tmu-calibration = <0x00000000 0x00000023>,
469						      <0x00000001 0x00000029>,
470						      <0x00000002 0x0000002f>,
471						      <0x00000003 0x00000035>,
472						      <0x00000004 0x0000003d>,
473						      <0x00000005 0x00000043>,
474						      <0x00000006 0x0000004b>,
475						      <0x00000007 0x00000051>,
476						      <0x00000008 0x00000057>,
477						      <0x00000009 0x0000005f>,
478						      <0x0000000a 0x00000067>,
479						      <0x0000000b 0x0000006f>,
480
481						      <0x00010000 0x0000001b>,
482						      <0x00010001 0x00000023>,
483						      <0x00010002 0x0000002b>,
484						      <0x00010003 0x00000033>,
485						      <0x00010004 0x0000003b>,
486						      <0x00010005 0x00000043>,
487						      <0x00010006 0x0000004b>,
488						      <0x00010007 0x00000055>,
489						      <0x00010008 0x0000005d>,
490						      <0x00010009 0x00000067>,
491						      <0x0001000a 0x00000070>,
492
493						      <0x00020000 0x00000017>,
494						      <0x00020001 0x00000023>,
495						      <0x00020002 0x0000002d>,
496						      <0x00020003 0x00000037>,
497						      <0x00020004 0x00000041>,
498						      <0x00020005 0x0000004b>,
499						      <0x00020006 0x00000057>,
500						      <0x00020007 0x00000063>,
501						      <0x00020008 0x0000006f>,
502
503						      <0x00030000 0x00000015>,
504						      <0x00030001 0x00000021>,
505						      <0x00030002 0x0000002d>,
506						      <0x00030003 0x00000039>,
507						      <0x00030004 0x00000045>,
508						      <0x00030005 0x00000053>,
509						      <0x00030006 0x0000005f>,
510						      <0x00030007 0x00000071>;
511				#thermal-sensor-cells = <1>;
512			};
513
514			wdog1: watchdog@30280000 {
515				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
516				reg = <0x30280000 0x10000>;
517				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
518				clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
519				status = "disabled";
520			};
521
522			wdog2: watchdog@30290000 {
523				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
524				reg = <0x30290000 0x10000>;
525				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
526				clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
527				status = "disabled";
528			};
529
530			wdog3: watchdog@302a0000 {
531				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
532				reg = <0x302a0000 0x10000>;
533				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
534				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
535				status = "disabled";
536			};
537
538			sdma2: dma-controller@302c0000 {
539				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
540				reg = <0x302c0000 0x10000>;
541				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
542				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
543					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
544				clock-names = "ipg", "ahb";
545				#dma-cells = <3>;
546				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
547			};
548
549			lcdif: lcd-controller@30320000 {
550				compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif";
551				reg = <0x30320000 0x10000>;
552				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
553				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
554					 <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
555					 <&clk IMX8MQ_CLK_DISP_AXI_ROOT>;
556				clock-names = "pix", "axi", "disp_axi";
557				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
558						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
559						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
560						  <&clk IMX8MQ_VIDEO_PLL1>;
561				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
562						  <&clk IMX8MQ_VIDEO_PLL1>,
563						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
564				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
565				status = "disabled";
566
567				port {
568					lcdif_mipi_dsi: endpoint {
569						remote-endpoint = <&mipi_dsi_lcdif_in>;
570					};
571				};
572			};
573
574			iomuxc: pinctrl@30330000 {
575				compatible = "fsl,imx8mq-iomuxc";
576				reg = <0x30330000 0x10000>;
577			};
578
579			iomuxc_gpr: syscon@30340000 {
580				compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
581				reg = <0x30340000 0x10000>;
582
583				mux: mux-controller {
584					compatible = "mmio-mux";
585					#mux-control-cells = <1>;
586					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
587				};
588			};
589
590			ocotp: efuse@30350000 {
591				compatible = "fsl,imx8mq-ocotp", "syscon";
592				reg = <0x30350000 0x10000>;
593				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
594				#address-cells = <1>;
595				#size-cells = <1>;
596
597				/*
598				 * The register address below maps to the MX8M
599				 * Fusemap Description Table entries this way.
600				 * Assuming
601				 *   reg = <ADDR SIZE>;
602				 * then
603				 *   Fuse Address = (ADDR * 4) + 0x400
604				 * Note that if SIZE is greater than 4, then
605				 * each subsequent fuse is located at offset
606				 * +0x10 in Fusemap Description Table (e.g.
607				 * reg = <0x4 0x8> describes fuses 0x410 and
608				 * 0x420).
609				 */
610				imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
611					reg = <0x4 0x8>;
612				};
613
614				cpu_speed_grade: speed-grade@10 { /* 0x440 */
615					reg = <0x10 4>;
616				};
617
618				fec_mac_address: mac-address@90 { /* 0x640 */
619					reg = <0x90 6>;
620				};
621			};
622
623			anatop: clock-controller@30360000 {
624				compatible = "fsl,imx8mq-anatop";
625				reg = <0x30360000 0x10000>;
626				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
627				#clock-cells = <1>;
628			};
629
630			snvs: snvs@30370000 {
631				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
632				reg = <0x30370000 0x10000>;
633
634				snvs_rtc: snvs-rtc-lp{
635					compatible = "fsl,sec-v4.0-mon-rtc-lp";
636					regmap =<&snvs>;
637					offset = <0x34>;
638					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
639						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
640					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
641					clock-names = "snvs-rtc";
642				};
643
644				snvs_pwrkey: snvs-powerkey {
645					compatible = "fsl,sec-v4.0-pwrkey";
646					regmap = <&snvs>;
647					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
648					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
649					clock-names = "snvs-pwrkey";
650					linux,keycode = <KEY_POWER>;
651					wakeup-source;
652					status = "disabled";
653				};
654			};
655
656			clk: clock-controller@30380000 {
657				compatible = "fsl,imx8mq-ccm";
658				reg = <0x30380000 0x10000>;
659				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
660				             <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
661				#clock-cells = <1>;
662				clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
663				         <&clk_ext1>, <&clk_ext2>,
664				         <&clk_ext3>, <&clk_ext4>;
665				clock-names = "ckil", "osc_25m", "osc_27m",
666				              "clk_ext1", "clk_ext2",
667				              "clk_ext3", "clk_ext4";
668				assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
669						  <&clk IMX8MQ_CLK_A53_CORE>,
670						  <&clk IMX8MQ_CLK_NOC>,
671						  <&clk IMX8MQ_CLK_AUDIO_AHB>,
672						  <&clk IMX8MQ_AUDIO_PLL1_BYPASS>,
673						  <&clk IMX8MQ_AUDIO_PLL2_BYPASS>,
674						  <&clk IMX8MQ_AUDIO_PLL1>,
675						  <&clk IMX8MQ_AUDIO_PLL2>;
676				assigned-clock-rates = <0>, <0>,
677						       <800000000>,
678						       <0>,
679						       <0>,
680						       <0>,
681						       <786432000>,
682						       <722534400>;
683				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
684							 <&clk IMX8MQ_ARM_PLL_OUT>,
685							 <0>,
686							 <&clk IMX8MQ_SYS2_PLL_500M>,
687							 <&clk IMX8MQ_AUDIO_PLL1>,
688							 <&clk IMX8MQ_AUDIO_PLL2>;
689			};
690
691			src: reset-controller@30390000 {
692				compatible = "fsl,imx8mq-src", "syscon";
693				reg = <0x30390000 0x10000>;
694				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
695				#reset-cells = <1>;
696			};
697
698			gpc: gpc@303a0000 {
699				compatible = "fsl,imx8mq-gpc";
700				reg = <0x303a0000 0x10000>;
701				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
702				interrupt-parent = <&gic>;
703				interrupt-controller;
704				#interrupt-cells = <3>;
705
706				pgc {
707					#address-cells = <1>;
708					#size-cells = <0>;
709
710					pgc_mipi: power-domain@0 {
711						#power-domain-cells = <0>;
712						reg = <IMX8M_POWER_DOMAIN_MIPI>;
713					};
714
715					/*
716					 * As per comment in ATF source code:
717					 *
718					 * PCIE1 and PCIE2 share the
719					 * same reset signal, if we
720					 * power down PCIE2, PCIE1
721					 * will be held in reset too.
722					 *
723					 * So instead of creating two
724					 * separate power domains for
725					 * PCIE1 and PCIE2 we create a
726					 * link between both and use
727					 * it as a shared PCIE power
728					 * domain.
729					 */
730					pgc_pcie: power-domain@1 {
731						#power-domain-cells = <0>;
732						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
733						power-domains = <&pgc_pcie2>;
734					};
735
736					pgc_otg1: power-domain@2 {
737						#power-domain-cells = <0>;
738						reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
739					};
740
741					pgc_otg2: power-domain@3 {
742						#power-domain-cells = <0>;
743						reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
744					};
745
746					pgc_ddr1: power-domain@4 {
747						#power-domain-cells = <0>;
748						reg = <IMX8M_POWER_DOMAIN_DDR1>;
749					};
750
751					pgc_gpu: power-domain@5 {
752						#power-domain-cells = <0>;
753						reg = <IMX8M_POWER_DOMAIN_GPU>;
754						clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
755						         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
756							 <&clk IMX8MQ_CLK_GPU_AXI>,
757						         <&clk IMX8MQ_CLK_GPU_AHB>;
758					};
759
760					pgc_vpu: power-domain@6 {
761						#power-domain-cells = <0>;
762						reg = <IMX8M_POWER_DOMAIN_VPU>;
763						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
764							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
765							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
766						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
767								  <&clk IMX8MQ_CLK_VPU_G2>,
768								  <&clk IMX8MQ_CLK_VPU_BUS>,
769								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
770						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
771									 <&clk IMX8MQ_VPU_PLL_OUT>,
772									 <&clk IMX8MQ_SYS1_PLL_800M>,
773									 <&clk IMX8MQ_VPU_PLL>;
774						assigned-clock-rates = <600000000>,
775								       <300000000>,
776								       <800000000>,
777								       <0>;
778					};
779
780					pgc_disp: power-domain@7 {
781						#power-domain-cells = <0>;
782						reg = <IMX8M_POWER_DOMAIN_DISP>;
783					};
784
785					pgc_mipi_csi1: power-domain@8 {
786						#power-domain-cells = <0>;
787						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
788					};
789
790					pgc_mipi_csi2: power-domain@9 {
791						#power-domain-cells = <0>;
792						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
793					};
794
795					pgc_pcie2: power-domain@a {
796						#power-domain-cells = <0>;
797						reg = <IMX8M_POWER_DOMAIN_PCIE2>;
798					};
799				};
800			};
801		};
802
803		aips2: bus@30400000 { /* AIPS2 */
804			compatible = "fsl,aips-bus", "simple-bus";
805			reg = <0x30400000 0x400000>;
806			#address-cells = <1>;
807			#size-cells = <1>;
808			ranges = <0x30400000 0x30400000 0x400000>;
809
810			pwm1: pwm@30660000 {
811				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
812				reg = <0x30660000 0x10000>;
813				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
814				clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
815				         <&clk IMX8MQ_CLK_PWM1_ROOT>;
816				clock-names = "ipg", "per";
817				#pwm-cells = <3>;
818				status = "disabled";
819			};
820
821			pwm2: pwm@30670000 {
822				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
823				reg = <0x30670000 0x10000>;
824				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
825				clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
826				         <&clk IMX8MQ_CLK_PWM2_ROOT>;
827				clock-names = "ipg", "per";
828				#pwm-cells = <3>;
829				status = "disabled";
830			};
831
832			pwm3: pwm@30680000 {
833				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
834				reg = <0x30680000 0x10000>;
835				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
836				clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
837				         <&clk IMX8MQ_CLK_PWM3_ROOT>;
838				clock-names = "ipg", "per";
839				#pwm-cells = <3>;
840				status = "disabled";
841			};
842
843			pwm4: pwm@30690000 {
844				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
845				reg = <0x30690000 0x10000>;
846				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
847				clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
848				         <&clk IMX8MQ_CLK_PWM4_ROOT>;
849				clock-names = "ipg", "per";
850				#pwm-cells = <3>;
851				status = "disabled";
852			};
853
854			system_counter: timer@306a0000 {
855				compatible = "nxp,sysctr-timer";
856				reg = <0x306a0000 0x20000>;
857				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
858				clocks = <&osc_25m>;
859				clock-names = "per";
860			};
861		};
862
863		aips3: bus@30800000 { /* AIPS3 */
864			compatible = "fsl,aips-bus", "simple-bus";
865			reg = <0x30800000 0x400000>;
866			#address-cells = <1>;
867			#size-cells = <1>;
868			ranges = <0x30800000 0x30800000 0x400000>,
869				 <0x08000000 0x08000000 0x10000000>;
870
871			spdif1: spdif@30810000 {
872				compatible = "fsl,imx35-spdif";
873				reg = <0x30810000 0x10000>;
874				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
875				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
876					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
877					<&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
878					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
879					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
880					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
881					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
882					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
883					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
884					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
885				clock-names = "core", "rxtx0",
886					      "rxtx1", "rxtx2",
887					      "rxtx3", "rxtx4",
888					      "rxtx5", "rxtx6",
889					      "rxtx7", "spba";
890				dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
891				dma-names = "rx", "tx";
892				status = "disabled";
893			};
894
895			ecspi1: spi@30820000 {
896				#address-cells = <1>;
897				#size-cells = <0>;
898				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
899				reg = <0x30820000 0x10000>;
900				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
901				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
902					 <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
903				clock-names = "ipg", "per";
904				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
905				dma-names = "rx", "tx";
906				status = "disabled";
907			};
908
909			ecspi2: spi@30830000 {
910				#address-cells = <1>;
911				#size-cells = <0>;
912				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
913				reg = <0x30830000 0x10000>;
914				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
915				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
916					 <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
917				clock-names = "ipg", "per";
918				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
919				dma-names = "rx", "tx";
920				status = "disabled";
921			};
922
923			ecspi3: spi@30840000 {
924				#address-cells = <1>;
925				#size-cells = <0>;
926				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
927				reg = <0x30840000 0x10000>;
928				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
929				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
930					 <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
931				clock-names = "ipg", "per";
932				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
933				dma-names = "rx", "tx";
934				status = "disabled";
935			};
936
937			uart1: serial@30860000 {
938				compatible = "fsl,imx8mq-uart",
939				             "fsl,imx6q-uart";
940				reg = <0x30860000 0x10000>;
941				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
942				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
943				         <&clk IMX8MQ_CLK_UART1_ROOT>;
944				clock-names = "ipg", "per";
945				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
946				dma-names = "rx", "tx";
947				status = "disabled";
948			};
949
950			uart3: serial@30880000 {
951				compatible = "fsl,imx8mq-uart",
952				             "fsl,imx6q-uart";
953				reg = <0x30880000 0x10000>;
954				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
955				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
956				         <&clk IMX8MQ_CLK_UART3_ROOT>;
957				clock-names = "ipg", "per";
958				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
959				dma-names = "rx", "tx";
960				status = "disabled";
961			};
962
963			uart2: serial@30890000 {
964				compatible = "fsl,imx8mq-uart",
965				             "fsl,imx6q-uart";
966				reg = <0x30890000 0x10000>;
967				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
968				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
969				         <&clk IMX8MQ_CLK_UART2_ROOT>;
970				clock-names = "ipg", "per";
971				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
972				dma-names = "rx", "tx";
973				status = "disabled";
974			};
975
976			spdif2: spdif@308a0000 {
977				compatible = "fsl,imx35-spdif";
978				reg = <0x308a0000 0x10000>;
979				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
980				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
981					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
982					<&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
983					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
984					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
985					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
986					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
987					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
988					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
989					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
990				clock-names = "core", "rxtx0",
991					      "rxtx1", "rxtx2",
992					      "rxtx3", "rxtx4",
993					      "rxtx5", "rxtx6",
994					      "rxtx7", "spba";
995				dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
996				dma-names = "rx", "tx";
997				status = "disabled";
998			};
999
1000			sai2: sai@308b0000 {
1001				#sound-dai-cells = <0>;
1002				compatible = "fsl,imx8mq-sai";
1003				reg = <0x308b0000 0x10000>;
1004				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1005				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
1006					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
1007					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
1008				clock-names = "bus", "mclk1", "mclk2", "mclk3";
1009				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
1010				dma-names = "rx", "tx";
1011				status = "disabled";
1012			};
1013
1014			sai3: sai@308c0000 {
1015				#sound-dai-cells = <0>;
1016				compatible = "fsl,imx8mq-sai";
1017				reg = <0x308c0000 0x10000>;
1018				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
1019				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
1020				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
1021				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
1022				clock-names = "bus", "mclk1", "mclk2", "mclk3";
1023				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
1024				dma-names = "rx", "tx";
1025				status = "disabled";
1026			};
1027
1028			crypto: crypto@30900000 {
1029				compatible = "fsl,sec-v4.0";
1030				#address-cells = <1>;
1031				#size-cells = <1>;
1032				reg = <0x30900000 0x40000>;
1033				ranges = <0 0x30900000 0x40000>;
1034				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1035				clocks = <&clk IMX8MQ_CLK_AHB>,
1036					 <&clk IMX8MQ_CLK_IPG_ROOT>;
1037				clock-names = "aclk", "ipg";
1038
1039				sec_jr0: jr@1000 {
1040					compatible = "fsl,sec-v4.0-job-ring";
1041					reg = <0x1000 0x1000>;
1042					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1043					status = "disabled";
1044				};
1045
1046				sec_jr1: jr@2000 {
1047					compatible = "fsl,sec-v4.0-job-ring";
1048					reg = <0x2000 0x1000>;
1049					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
1050				};
1051
1052				sec_jr2: jr@3000 {
1053					compatible = "fsl,sec-v4.0-job-ring";
1054					reg = <0x3000 0x1000>;
1055					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
1056				};
1057			};
1058
1059			mipi_dsi: dsi@30a00000 {
1060				compatible = "fsl,imx8mq-nwl-dsi";
1061				reg = <0x30a00000 0x300>;
1062				#address-cells = <1>;
1063				#size-cells = <0>;
1064				clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
1065					 <&clk IMX8MQ_CLK_DSI_AHB>,
1066					 <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
1067					 <&clk IMX8MQ_CLK_DSI_PHY_REF>,
1068					 <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
1069				clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
1070				assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
1071						  <&clk IMX8MQ_CLK_DSI_CORE>,
1072						  <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
1073				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
1074							 <&clk IMX8MQ_SYS1_PLL_266M>;
1075				assigned-clock-rates = <80000000>, <266000000>, <20000000>;
1076				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
1077				mux-controls = <&mux 0>;
1078				power-domains = <&pgc_mipi>;
1079				phys = <&dphy>;
1080				phy-names = "dphy";
1081				resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
1082					 <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
1083					 <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
1084					 <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
1085				reset-names = "byte", "dpi", "esc", "pclk";
1086				status = "disabled";
1087
1088				ports {
1089					#address-cells = <1>;
1090					#size-cells = <0>;
1091
1092					port@0 {
1093						reg = <0>;
1094						#address-cells = <1>;
1095						#size-cells = <0>;
1096						mipi_dsi_lcdif_in: endpoint@0 {
1097							reg = <0>;
1098							remote-endpoint = <&lcdif_mipi_dsi>;
1099						};
1100					};
1101				};
1102			};
1103
1104			dphy: dphy@30a00300 {
1105				compatible = "fsl,imx8mq-mipi-dphy";
1106				reg = <0x30a00300 0x100>;
1107				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
1108				clock-names = "phy_ref";
1109				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
1110						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
1111						  <&clk IMX8MQ_CLK_DSI_PHY_REF>,
1112						  <&clk IMX8MQ_VIDEO_PLL1>;
1113				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
1114						  <&clk IMX8MQ_VIDEO_PLL1>,
1115						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
1116				assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
1117				#phy-cells = <0>;
1118				power-domains = <&pgc_mipi>;
1119				status = "disabled";
1120			};
1121
1122			i2c1: i2c@30a20000 {
1123				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1124				reg = <0x30a20000 0x10000>;
1125				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1126				clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
1127				#address-cells = <1>;
1128				#size-cells = <0>;
1129				status = "disabled";
1130			};
1131
1132			i2c2: i2c@30a30000 {
1133				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1134				reg = <0x30a30000 0x10000>;
1135				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
1136				clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
1137				#address-cells = <1>;
1138				#size-cells = <0>;
1139				status = "disabled";
1140			};
1141
1142			i2c3: i2c@30a40000 {
1143				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1144				reg = <0x30a40000 0x10000>;
1145				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1146				clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
1147				#address-cells = <1>;
1148				#size-cells = <0>;
1149				status = "disabled";
1150			};
1151
1152			i2c4: i2c@30a50000 {
1153				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1154				reg = <0x30a50000 0x10000>;
1155				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1156				clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
1157				#address-cells = <1>;
1158				#size-cells = <0>;
1159				status = "disabled";
1160			};
1161
1162			uart4: serial@30a60000 {
1163				compatible = "fsl,imx8mq-uart",
1164				             "fsl,imx6q-uart";
1165				reg = <0x30a60000 0x10000>;
1166				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1167				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
1168				         <&clk IMX8MQ_CLK_UART4_ROOT>;
1169				clock-names = "ipg", "per";
1170				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
1171				dma-names = "rx", "tx";
1172				status = "disabled";
1173			};
1174
1175			mipi_csi1: csi@30a70000 {
1176				compatible = "fsl,imx8mq-mipi-csi2";
1177				reg = <0x30a70000 0x1000>;
1178				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
1179				   <&clk IMX8MQ_CLK_CSI1_ESC>,
1180				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
1181				clock-names = "core", "esc", "ui";
1182				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
1183				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
1184				    <&clk IMX8MQ_CLK_CSI1_ESC>;
1185				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
1186				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1187					<&clk IMX8MQ_SYS2_PLL_1000M>,
1188					<&clk IMX8MQ_SYS1_PLL_800M>;
1189				power-domains = <&pgc_mipi_csi1>;
1190				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
1191					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
1192					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
1193				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
1194				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
1195				interconnect-names = "dram";
1196				status = "disabled";
1197
1198				ports {
1199					#address-cells = <1>;
1200					#size-cells = <0>;
1201
1202					port@1 {
1203						reg = <1>;
1204
1205						csi1_mipi_ep: endpoint {
1206							remote-endpoint = <&csi1_ep>;
1207						};
1208					};
1209				};
1210			};
1211
1212			csi1: csi@30a90000 {
1213				compatible = "fsl,imx8mq-csi";
1214				reg = <0x30a90000 0x10000>;
1215				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
1216				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
1217				clock-names = "mclk";
1218				status = "disabled";
1219
1220				port {
1221					csi1_ep: endpoint {
1222						remote-endpoint = <&csi1_mipi_ep>;
1223					};
1224				};
1225			};
1226
1227			mipi_csi2: csi@30b60000 {
1228				compatible = "fsl,imx8mq-mipi-csi2";
1229				reg = <0x30b60000 0x1000>;
1230				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
1231				   <&clk IMX8MQ_CLK_CSI2_ESC>,
1232				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
1233				clock-names = "core", "esc", "ui";
1234				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
1235				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
1236				    <&clk IMX8MQ_CLK_CSI2_ESC>;
1237				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
1238				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1239					<&clk IMX8MQ_SYS2_PLL_1000M>,
1240					<&clk IMX8MQ_SYS1_PLL_800M>;
1241				power-domains = <&pgc_mipi_csi2>;
1242				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
1243					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
1244					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
1245				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
1246				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
1247				interconnect-names = "dram";
1248				status = "disabled";
1249
1250				ports {
1251					#address-cells = <1>;
1252					#size-cells = <0>;
1253
1254					port@1 {
1255						reg = <1>;
1256
1257						csi2_mipi_ep: endpoint {
1258							remote-endpoint = <&csi2_ep>;
1259						};
1260					};
1261				};
1262			};
1263
1264			csi2: csi@30b80000 {
1265				compatible = "fsl,imx8mq-csi";
1266				reg = <0x30b80000 0x10000>;
1267				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1268				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
1269				clock-names = "mclk";
1270				status = "disabled";
1271
1272				port {
1273					csi2_ep: endpoint {
1274						remote-endpoint = <&csi2_mipi_ep>;
1275					};
1276				};
1277			};
1278
1279			mu: mailbox@30aa0000 {
1280				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
1281				reg = <0x30aa0000 0x10000>;
1282				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1283				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
1284				#mbox-cells = <2>;
1285			};
1286
1287			usdhc1: mmc@30b40000 {
1288				compatible = "fsl,imx8mq-usdhc",
1289				             "fsl,imx7d-usdhc";
1290				reg = <0x30b40000 0x10000>;
1291				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1292				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
1293				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
1294				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
1295				clock-names = "ipg", "ahb", "per";
1296				fsl,tuning-start-tap = <20>;
1297				fsl,tuning-step = <2>;
1298				bus-width = <4>;
1299				status = "disabled";
1300			};
1301
1302			usdhc2: mmc@30b50000 {
1303				compatible = "fsl,imx8mq-usdhc",
1304				             "fsl,imx7d-usdhc";
1305				reg = <0x30b50000 0x10000>;
1306				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1307				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
1308				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
1309				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
1310				clock-names = "ipg", "ahb", "per";
1311				fsl,tuning-start-tap = <20>;
1312				fsl,tuning-step = <2>;
1313				bus-width = <4>;
1314				status = "disabled";
1315			};
1316
1317			qspi0: spi@30bb0000 {
1318				#address-cells = <1>;
1319				#size-cells = <0>;
1320				compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
1321				reg = <0x30bb0000 0x10000>,
1322				      <0x08000000 0x10000000>;
1323				reg-names = "QuadSPI", "QuadSPI-memory";
1324				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1325				clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
1326					 <&clk IMX8MQ_CLK_QSPI_ROOT>;
1327				clock-names = "qspi_en", "qspi";
1328				status = "disabled";
1329			};
1330
1331			sdma1: dma-controller@30bd0000 {
1332				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
1333				reg = <0x30bd0000 0x10000>;
1334				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1335				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
1336					 <&clk IMX8MQ_CLK_AHB>;
1337				clock-names = "ipg", "ahb";
1338				#dma-cells = <3>;
1339				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1340			};
1341
1342			fec1: ethernet@30be0000 {
1343				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1344				reg = <0x30be0000 0x10000>;
1345				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1346				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1347					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1348					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1349				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
1350				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
1351				         <&clk IMX8MQ_CLK_ENET_TIMER>,
1352				         <&clk IMX8MQ_CLK_ENET_REF>,
1353				         <&clk IMX8MQ_CLK_ENET_PHY_REF>;
1354				clock-names = "ipg", "ahb", "ptp",
1355				              "enet_clk_ref", "enet_out";
1356				assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
1357						  <&clk IMX8MQ_CLK_ENET_TIMER>,
1358						  <&clk IMX8MQ_CLK_ENET_REF>,
1359						  <&clk IMX8MQ_CLK_ENET_PHY_REF>;
1360				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1361							 <&clk IMX8MQ_SYS2_PLL_100M>,
1362							 <&clk IMX8MQ_SYS2_PLL_125M>,
1363							 <&clk IMX8MQ_SYS2_PLL_50M>;
1364				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1365				fsl,num-tx-queues = <3>;
1366				fsl,num-rx-queues = <3>;
1367				nvmem-cells = <&fec_mac_address>;
1368				nvmem-cell-names = "mac-address";
1369				fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
1370				status = "disabled";
1371			};
1372		};
1373
1374		noc: interconnect@32700000 {
1375			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
1376			reg = <0x32700000 0x100000>;
1377			clocks = <&clk IMX8MQ_CLK_NOC>;
1378			fsl,ddrc = <&ddrc>;
1379			#interconnect-cells = <1>;
1380			operating-points-v2 = <&noc_opp_table>;
1381
1382			noc_opp_table: opp-table {
1383				compatible = "operating-points-v2";
1384
1385				opp-133000000 {
1386					opp-hz = /bits/ 64 <133333333>;
1387				};
1388
1389				opp-400000000 {
1390					opp-hz = /bits/ 64 <400000000>;
1391				};
1392
1393				opp-800000000 {
1394					opp-hz = /bits/ 64 <800000000>;
1395				};
1396			};
1397		};
1398
1399		aips4: bus@32c00000 { /* AIPS4 */
1400			compatible = "fsl,aips-bus", "simple-bus";
1401			reg = <0x32c00000 0x400000>;
1402			#address-cells = <1>;
1403			#size-cells = <1>;
1404			ranges = <0x32c00000 0x32c00000 0x400000>;
1405
1406			irqsteer: interrupt-controller@32e2d000 {
1407				compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
1408				reg = <0x32e2d000 0x1000>;
1409				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1410				clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
1411				clock-names = "ipg";
1412				fsl,channel = <0>;
1413				fsl,num-irqs = <64>;
1414				interrupt-controller;
1415				#interrupt-cells = <1>;
1416			};
1417		};
1418
1419		gpu: gpu@38000000 {
1420			compatible = "vivante,gc";
1421			reg = <0x38000000 0x40000>;
1422			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1423			clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
1424			         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
1425			         <&clk IMX8MQ_CLK_GPU_AXI>,
1426			         <&clk IMX8MQ_CLK_GPU_AHB>;
1427			clock-names = "core", "shader", "bus", "reg";
1428			#cooling-cells = <2>;
1429			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
1430			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
1431			                  <&clk IMX8MQ_CLK_GPU_AXI>,
1432			                  <&clk IMX8MQ_CLK_GPU_AHB>,
1433			                  <&clk IMX8MQ_GPU_PLL_BYPASS>;
1434			assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
1435			                         <&clk IMX8MQ_GPU_PLL_OUT>,
1436			                         <&clk IMX8MQ_GPU_PLL_OUT>,
1437			                         <&clk IMX8MQ_GPU_PLL_OUT>,
1438			                         <&clk IMX8MQ_GPU_PLL>;
1439			assigned-clock-rates = <800000000>, <800000000>,
1440			                       <800000000>, <800000000>, <0>;
1441			power-domains = <&pgc_gpu>;
1442		};
1443
1444		usb_dwc3_0: usb@38100000 {
1445			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
1446			reg = <0x38100000 0x10000>;
1447			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
1448			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
1449				 <&clk IMX8MQ_CLK_32K>;
1450			clock-names = "bus_early", "ref", "suspend";
1451			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
1452			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
1453			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
1454			                         <&clk IMX8MQ_SYS1_PLL_100M>;
1455			assigned-clock-rates = <500000000>, <100000000>;
1456			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1457			phys = <&usb3_phy0>, <&usb3_phy0>;
1458			phy-names = "usb2-phy", "usb3-phy";
1459			power-domains = <&pgc_otg1>;
1460			status = "disabled";
1461		};
1462
1463		usb3_phy0: usb-phy@381f0040 {
1464			compatible = "fsl,imx8mq-usb-phy";
1465			reg = <0x381f0040 0x40>;
1466			clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
1467			clock-names = "phy";
1468			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
1469			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
1470			assigned-clock-rates = <100000000>;
1471			#phy-cells = <0>;
1472			status = "disabled";
1473		};
1474
1475		usb_dwc3_1: usb@38200000 {
1476			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
1477			reg = <0x38200000 0x10000>;
1478			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
1479			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
1480				 <&clk IMX8MQ_CLK_32K>;
1481			clock-names = "bus_early", "ref", "suspend";
1482			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
1483			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
1484			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
1485			                         <&clk IMX8MQ_SYS1_PLL_100M>;
1486			assigned-clock-rates = <500000000>, <100000000>;
1487			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1488			phys = <&usb3_phy1>, <&usb3_phy1>;
1489			phy-names = "usb2-phy", "usb3-phy";
1490			power-domains = <&pgc_otg2>;
1491			status = "disabled";
1492		};
1493
1494		usb3_phy1: usb-phy@382f0040 {
1495			compatible = "fsl,imx8mq-usb-phy";
1496			reg = <0x382f0040 0x40>;
1497			clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
1498			clock-names = "phy";
1499			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
1500			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
1501			assigned-clock-rates = <100000000>;
1502			#phy-cells = <0>;
1503			status = "disabled";
1504		};
1505
1506		vpu_g1: video-codec@38300000 {
1507			compatible = "nxp,imx8mq-vpu-g1";
1508			reg = <0x38300000 0x10000>;
1509			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1510			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
1511			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
1512		};
1513
1514		vpu_g2: video-codec@38310000 {
1515			compatible = "nxp,imx8mq-vpu-g2";
1516			reg = <0x38310000 0x10000>;
1517			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1518			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
1519			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
1520		};
1521
1522		vpu_blk_ctrl: blk-ctrl@38320000 {
1523			compatible = "fsl,imx8mq-vpu-blk-ctrl";
1524			reg = <0x38320000 0x100>;
1525			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
1526			power-domain-names = "bus", "g1", "g2";
1527			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
1528				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
1529			clock-names = "g1", "g2";
1530			#power-domain-cells = <1>;
1531		};
1532
1533		pcie0: pcie@33800000 {
1534			compatible = "fsl,imx8mq-pcie";
1535			reg = <0x33800000 0x400000>,
1536			      <0x1ff00000 0x80000>;
1537			reg-names = "dbi", "config";
1538			#address-cells = <3>;
1539			#size-cells = <2>;
1540			device_type = "pci";
1541			bus-range = <0x00 0xff>;
1542			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
1543				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1544			num-lanes = <1>;
1545			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1546			interrupt-names = "msi";
1547			#interrupt-cells = <1>;
1548			interrupt-map-mask = <0 0 0 0x7>;
1549			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1550			                <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1551			                <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1552			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1553			fsl,max-link-speed = <2>;
1554			linux,pci-domain = <0>;
1555			clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
1556				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
1557				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
1558				 <&clk IMX8MQ_CLK_PCIE1_AUX>;
1559			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1560			power-domains = <&pgc_pcie>;
1561			resets = <&src IMX8MQ_RESET_PCIEPHY>,
1562			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1563			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1564			reset-names = "pciephy", "apps", "turnoff";
1565			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
1566			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
1567			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
1568			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1569			                         <&clk IMX8MQ_SYS2_PLL_100M>,
1570			                         <&clk IMX8MQ_SYS1_PLL_80M>;
1571			assigned-clock-rates = <250000000>, <100000000>,
1572			                       <10000000>;
1573			status = "disabled";
1574		};
1575
1576		pcie1: pcie@33c00000 {
1577			compatible = "fsl,imx8mq-pcie";
1578			reg = <0x33c00000 0x400000>,
1579			      <0x27f00000 0x80000>;
1580			reg-names = "dbi", "config";
1581			#address-cells = <3>;
1582			#size-cells = <2>;
1583			device_type = "pci";
1584			bus-range = <0x00 0xff>;
1585			ranges =  <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
1586				  <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
1587			num-lanes = <1>;
1588			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1589			interrupt-names = "msi";
1590			#interrupt-cells = <1>;
1591			interrupt-map-mask = <0 0 0 0x7>;
1592			interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
1593					<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
1594					<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
1595					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1596			fsl,max-link-speed = <2>;
1597			linux,pci-domain = <1>;
1598			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
1599				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1600				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1601				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
1602			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1603			power-domains = <&pgc_pcie>;
1604			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
1605			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
1606			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
1607			reset-names = "pciephy", "apps", "turnoff";
1608			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
1609			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1610			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
1611			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1612			                         <&clk IMX8MQ_SYS2_PLL_100M>,
1613			                         <&clk IMX8MQ_SYS1_PLL_80M>;
1614			assigned-clock-rates = <250000000>, <100000000>,
1615			                       <10000000>;
1616			status = "disabled";
1617		};
1618
1619		pcie1_ep: pcie-ep@33c00000 {
1620			compatible = "fsl,imx8mq-pcie-ep";
1621			reg = <0x33c00000 0x000400000>,
1622			      <0x20000000 0x08000000>;
1623			reg-names = "dbi", "addr_space";
1624			num-lanes = <1>;
1625			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1626			interrupt-names = "dma";
1627			fsl,max-link-speed = <2>;
1628			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
1629				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1630				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1631				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
1632			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1633			power-domains = <&pgc_pcie>;
1634			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
1635				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
1636				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
1637			reset-names = "pciephy", "apps", "turnoff";
1638			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
1639					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1640					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
1641			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1642						 <&clk IMX8MQ_SYS2_PLL_100M>,
1643						 <&clk IMX8MQ_SYS1_PLL_80M>;
1644			assigned-clock-rates = <250000000>, <100000000>,
1645					       <10000000>;
1646			num-ib-windows = <4>;
1647			num-ob-windows = <4>;
1648			status = "disabled";
1649		};
1650
1651		gic: interrupt-controller@38800000 {
1652			compatible = "arm,gic-v3";
1653			reg = <0x38800000 0x10000>,	/* GIC Dist */
1654			      <0x38880000 0xc0000>,	/* GICR */
1655			      <0x31000000 0x2000>,	/* GICC */
1656			      <0x31010000 0x2000>,	/* GICV */
1657			      <0x31020000 0x2000>;	/* GICH */
1658			#interrupt-cells = <3>;
1659			interrupt-controller;
1660			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1661			interrupt-parent = <&gic>;
1662		};
1663
1664		ddrc: memory-controller@3d400000 {
1665			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
1666			reg = <0x3d400000 0x400000>;
1667			clock-names = "core", "pll", "alt", "apb";
1668			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
1669				 <&clk IMX8MQ_DRAM_PLL_OUT>,
1670				 <&clk IMX8MQ_CLK_DRAM_ALT>,
1671				 <&clk IMX8MQ_CLK_DRAM_APB>;
1672			status = "disabled";
1673		};
1674
1675		ddr-pmu@3d800000 {
1676			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
1677			reg = <0x3d800000 0x400000>;
1678			interrupt-parent = <&gic>;
1679			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1680		};
1681	};
1682};
1683