xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts (revision e32fecd0c2c3ee37c47ee100f169e7eb0282a873)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree File for the Kontron pitx-imx8m board.
4 *
5 * Copyright (C) 2021 Heiko Thiery <heiko.thiery@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "imx8mq.dtsi"
11#include <dt-bindings/net/ti-dp83867.h>
12
13/ {
14	model = "Kontron pITX-imx8m";
15	compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
16
17	aliases {
18		i2c0 = &i2c1;
19		i2c1 = &i2c2;
20		i2c2 = &i2c3;
21		mmc0 = &usdhc1;
22		mmc1 = &usdhc2;
23		serial0 = &uart1;
24		serial1 = &uart2;
25		serial2 = &uart3;
26		spi0 = &qspi0;
27		spi1 = &ecspi2;
28	};
29
30	chosen {
31		stdout-path = "serial2:115200n8";
32	};
33
34	pcie0_refclk: pcie0-clock {
35		compatible = "fixed-clock";
36		#clock-cells = <0>;
37		clock-frequency = <100000000>;
38	};
39
40	pcie1_refclk: pcie1-clock {
41		compatible = "fixed-clock";
42		#clock-cells = <0>;
43		clock-frequency = <100000000>;
44	};
45
46	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
47		compatible = "regulator-fixed";
48		pinctrl-names = "default";
49		pinctrl-0 = <&pinctrl_reg_usdhc2>;
50		regulator-name = "V_3V3_SD";
51		regulator-min-microvolt = <3300000>;
52		regulator-max-microvolt = <3300000>;
53		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
54		off-on-delay-us = <20000>;
55		enable-active-high;
56	};
57};
58
59&ecspi2 {
60	#address-cells = <1>;
61	#size-cells = <0>;
62	pinctrl-names = "default";
63	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
64	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
65	status = "okay";
66
67	tpm@0 {
68		compatible = "infineon,slb9670";
69		reg = <0>;
70		spi-max-frequency = <43000000>;
71	};
72};
73
74&fec1 {
75	pinctrl-names = "default";
76	pinctrl-0 = <&pinctrl_fec1>;
77	phy-mode = "rgmii-id";
78	phy-handle = <&ethphy0>;
79	fsl,magic-packet;
80	status = "okay";
81
82	mdio {
83		#address-cells = <1>;
84		#size-cells = <0>;
85
86		ethphy0: ethernet-phy@0 {
87			compatible = "ethernet-phy-ieee802.3-c22";
88			reg = <0>;
89			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
90			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
91			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
92			reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
93			reset-assert-us = <10>;
94			reset-deassert-us = <280>;
95		};
96	};
97};
98
99&i2c1 {
100	clock-frequency = <400000>;
101	pinctrl-names = "default";
102	pinctrl-0 = <&pinctrl_i2c1>;
103	status = "okay";
104
105	pmic@8 {
106		compatible = "fsl,pfuze100";
107		fsl,pfuze-support-disable-sw;
108		reg = <0x8>;
109
110		regulators {
111			sw1a_reg: sw1ab {
112				regulator-name = "V_0V9_GPU";
113				regulator-min-microvolt = <825000>;
114				regulator-max-microvolt = <1100000>;
115			};
116
117			sw1c_reg: sw1c {
118				regulator-name = "V_0V9_VPU";
119				regulator-min-microvolt = <825000>;
120				regulator-max-microvolt = <1100000>;
121			};
122
123			sw2_reg: sw2 {
124				regulator-name = "V_1V1_NVCC_DRAM";
125				regulator-min-microvolt = <1100000>;
126				regulator-max-microvolt = <1100000>;
127				regulator-always-on;
128			};
129
130			sw3a_reg: sw3ab {
131				regulator-name = "V_1V0_DRAM";
132				regulator-min-microvolt = <825000>;
133				regulator-max-microvolt = <1100000>;
134				regulator-always-on;
135			};
136
137			sw4_reg: sw4 {
138				regulator-name = "V_1V8_S0";
139				regulator-min-microvolt = <1800000>;
140				regulator-max-microvolt = <1800000>;
141				regulator-always-on;
142			};
143
144			swbst_reg: swbst {
145				regulator-name = "NC";
146				regulator-min-microvolt = <5000000>;
147				regulator-max-microvolt = <5150000>;
148			};
149
150			snvs_reg: vsnvs {
151				regulator-name = "V_0V9_SNVS";
152				regulator-min-microvolt = <1000000>;
153				regulator-max-microvolt = <3000000>;
154				regulator-always-on;
155			};
156
157			vref_reg: vrefddr {
158				regulator-name = "V_0V55_VREF_DDR";
159				regulator-always-on;
160			};
161
162			vgen1_reg: vgen1 {
163				regulator-name = "V_1V5_CSI";
164				regulator-min-microvolt = <800000>;
165				regulator-max-microvolt = <1550000>;
166			};
167
168			vgen2_reg: vgen2 {
169				regulator-name = "V_0V9_PHY";
170				regulator-min-microvolt = <850000>;
171				regulator-max-microvolt = <975000>;
172				regulator-always-on;
173			};
174
175			vgen3_reg: vgen3 {
176				regulator-name = "V_1V8_PHY";
177				regulator-min-microvolt = <1675000>;
178				regulator-max-microvolt = <1975000>;
179				regulator-always-on;
180			};
181
182			vgen4_reg: vgen4 {
183				regulator-name = "V_1V8_VDDA";
184				regulator-min-microvolt = <1625000>;
185				regulator-max-microvolt = <1875000>;
186				regulator-always-on;
187			};
188
189			vgen5_reg: vgen5 {
190				regulator-name = "V_3V3_PHY";
191				regulator-min-microvolt = <3075000>;
192				regulator-max-microvolt = <3625000>;
193				regulator-always-on;
194			};
195
196			vgen6_reg: vgen6 {
197				regulator-name = "V_2V8_CAM";
198				regulator-min-microvolt = <1800000>;
199				regulator-max-microvolt = <3300000>;
200				regulator-always-on;
201			};
202		};
203	};
204
205	fan-controller@1b {
206		compatible = "maxim,max6650";
207		reg = <0x1b>;
208		maxim,fan-microvolt = <5000000>;
209	};
210
211	rtc@32 {
212		compatible = "microcrystal,rv8803";
213		reg = <0x32>;
214	};
215
216	sensor@4b {
217		compatible = "national,lm75b";
218		reg = <0x4b>;
219	};
220
221	eeprom@51 {
222		compatible = "atmel,24c32";
223		reg = <0x51>;
224		pagesize = <32>;
225	};
226};
227
228&i2c2 {
229	clock-frequency = <100000>;
230	pinctrl-names = "default";
231	pinctrl-0 = <&pinctrl_i2c2>;
232	status = "okay";
233};
234
235&i2c3 {
236	clock-frequency = <100000>;
237	pinctrl-names = "default";
238	pinctrl-0 = <&pinctrl_i2c3>;
239	status = "okay";
240};
241
242/* M.2 B-key slot */
243&pcie0 {
244	pinctrl-names = "default";
245	pinctrl-0 = <&pinctrl_pcie0>;
246	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
247	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
248		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
249		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
250		 <&pcie0_refclk>;
251	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
252	status = "okay";
253};
254
255/* Intel Ethernet Controller I210/I211 */
256&pcie1 {
257	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
258		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
259		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
260		 <&pcie1_refclk>;
261	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
262	fsl,max-link-speed = <1>;
263	status = "okay";
264};
265
266&pgc_gpu {
267	power-supply = <&sw1a_reg>;
268};
269
270&pgc_vpu {
271	power-supply = <&sw1c_reg>;
272};
273
274&qspi0 {
275	pinctrl-names = "default";
276	pinctrl-0 = <&pinctrl_qspi>;
277	status = "okay";
278
279	flash@0 {
280		compatible = "jedec,spi-nor";
281		#address-cells = <1>;
282		#size-cells = <1>;
283		reg = <0>;
284		spi-tx-bus-width = <1>;
285		spi-rx-bus-width = <4>;
286		m25p,fast-read;
287		spi-max-frequency = <50000000>;
288	};
289};
290
291&snvs_pwrkey {
292	status = "okay";
293};
294
295&uart1 {
296	pinctrl-names = "default";
297	pinctrl-0 = <&pinctrl_uart1>;
298	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
299	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
300	status = "okay";
301};
302
303&uart2 {
304	pinctrl-names = "default";
305	pinctrl-0 = <&pinctrl_uart2>;
306	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
307	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
308	status = "okay";
309};
310
311&uart3 {
312	pinctrl-names = "default";
313	pinctrl-0 = <&pinctrl_uart3>;
314	uart-has-rtscts;
315	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
316	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
317	status = "okay";
318};
319
320&usb3_phy0 {
321	status = "okay";
322};
323
324&usb3_phy1 {
325	status = "okay";
326};
327
328&usb_dwc3_0 {
329	pinctrl-names = "default";
330	pinctrl-0 = <&pinctrl_usb0>;
331	dr_mode = "otg";
332	hnp-disable;
333	srp-disable;
334	adp-disable;
335	maximum-speed = "high-speed";
336	status = "okay";
337};
338
339&usb_dwc3_1 {
340	dr_mode = "host";
341	status = "okay";
342};
343
344&usdhc1 {
345	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
346	assigned-clock-rates = <400000000>;
347	pinctrl-names = "default", "state_100mhz", "state_200mhz";
348	pinctrl-0 = <&pinctrl_usdhc1>;
349	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
350	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
351	vqmmc-supply = <&sw4_reg>;
352	bus-width = <8>;
353	non-removable;
354	no-sd;
355	no-sdio;
356	status = "okay";
357};
358
359&usdhc2 {
360	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
361	assigned-clock-rates = <200000000>;
362	pinctrl-names = "default", "state_100mhz", "state_200mhz";
363	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
364	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
365	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
366	bus-width = <4>;
367	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
368	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
369	vmmc-supply = <&reg_usdhc2_vmmc>;
370	status = "okay";
371};
372
373&wdog1 {
374	pinctrl-names = "default";
375	pinctrl-0 = <&pinctrl_wdog>;
376	fsl,ext-reset-output;
377	status = "okay";
378};
379
380&iomuxc {
381	pinctrl-names = "default";
382	pinctrl-0 = <&pinctrl_hog>;
383
384	pinctrl_hog: hoggrp {
385		fsl,pins = <
386			MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* TPM Reset */
387			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19 /* USB2 Hub Reset */
388		>;
389	};
390
391	pinctrl_gpio: gpiogrp {
392		fsl,pins = <
393			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19 /* GPIO0 */
394			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19 /* GPIO1 */
395			MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* GPIO2 */
396			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* GPIO3 */
397			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* GPIO4 */
398			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* GPIO5 */
399			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* GPIO6 */
400			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x19 /* GPIO7 */
401		>;
402	};
403
404	pinctrl_pcie0: pcie0grp {
405		fsl,pins = <
406			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x16 /* PCIE_PERST */
407			MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29		0x16 /* W_DISABLE */
408		>;
409	};
410
411	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
412		fsl,pins = <
413			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
414		>;
415	};
416
417	pinctrl_fec1: fec1grp {
418		fsl,pins = <
419			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
420			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
421			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
422			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
423			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
424			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
425			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
426			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
427			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
428			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
429			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
430			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
431			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
432			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
433			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x16
434			MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x16
435		>;
436	};
437
438	pinctrl_i2c1: i2c1grp {
439		fsl,pins = <
440			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
441			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
442		>;
443	};
444
445	pinctrl_i2c2: i2c2grp {
446		fsl,pins = <
447			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
448			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
449		>;
450	};
451
452	pinctrl_i2c3: i2c3grp {
453		fsl,pins = <
454			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
455			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
456		>;
457	};
458
459	pinctrl_qspi: qspigrp {
460		fsl,pins = <
461			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
462			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
463			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
464			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
465			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
466			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
467		>;
468	};
469
470	pinctrl_ecspi2: ecspi2grp {
471		fsl,pins = <
472			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x19
473			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x19
474			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x19
475		>;
476	};
477
478	pinctrl_ecspi2_cs: ecspi2csgrp {
479		fsl,pins = <
480			MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
481		>;
482	};
483
484	pinctrl_uart1: uart1grp {
485		fsl,pins = <
486			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
487			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
488		>;
489	};
490
491	pinctrl_uart2: uart2grp {
492		fsl,pins = <
493			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
494			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
495		>;
496	};
497
498	pinctrl_uart3: uart3grp {
499		fsl,pins = <
500			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
501			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
502			MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x49
503			MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x49
504		>;
505	};
506
507	pinctrl_usdhc1: usdhc1grp {
508		fsl,pins = <
509			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
510			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
511			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
512			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
513			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
514			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
515			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
516			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
517			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
518			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
519			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
520			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
521		>;
522	};
523
524	pinctrl_usdhc1_100mhz: usdhc1-100grp {
525		fsl,pins = <
526			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
527			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
528			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
529			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
530			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
531			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
532			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
533			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
534			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
535			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
536			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
537			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
538		>;
539	};
540
541	pinctrl_usdhc1_200mhz: usdhc1-200grp {
542		fsl,pins = <
543			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
544			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
545			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
546			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
547			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
548			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
549			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
550			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
551			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
552			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
553			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
554			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
555		>;
556	};
557
558	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
559		fsl,pins = <
560			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
561			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20			0x19
562		>;
563	};
564
565	pinctrl_usdhc2: usdhc2grp {
566		fsl,pins = <
567			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
568			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
569			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
570			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
571			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
572			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
573			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
574		>;
575	};
576
577	pinctrl_usdhc2_100mhz: usdhc2-100grp {
578		fsl,pins = <
579			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8d
580			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcd
581			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcd
582			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcd
583			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcd
584			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcd
585			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
586		>;
587	};
588
589	pinctrl_usdhc2_200mhz: usdhc2-200grp {
590		fsl,pins = <
591			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9f
592			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdf
593			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdf
594			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdf
595			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdf
596			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdf
597			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
598		>;
599	};
600
601	pinctrl_usb0: usb0grp {
602		fsl,pins = <
603			MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x19
604			MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19
605		>;
606	};
607
608	pinctrl_wdog: wdoggrp {
609		fsl,pins = <
610			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
611		>;
612	};
613};
614