xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/imx8mp-debix-model-a.dts (revision a0ca4af9455b844c5e094fc1b09b1390ffa979fc)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 * Copyright 2022 Ideas on Board Oy
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/usb/pd.h>
12
13#include "imx8mp.dtsi"
14
15/ {
16	model = "Polyhex Debix Model A i.MX8MPlus board";
17	compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp";
18
19	chosen {
20		stdout-path = &uart2;
21	};
22
23	leds {
24		compatible = "gpio-leds";
25		pinctrl-names = "default";
26		pinctrl-0 = <&pinctrl_gpio_led>;
27
28		led-0 {
29			function = LED_FUNCTION_POWER;
30			color = <LED_COLOR_ID_RED>;
31			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
32			default-state = "on";
33		};
34	};
35
36	reg_usdhc2_vmmc: regulator-usdhc2 {
37		compatible = "regulator-fixed";
38		pinctrl-names = "default";
39		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
40		regulator-name = "VSD_3V3";
41		regulator-min-microvolt = <3300000>;
42		regulator-max-microvolt = <3300000>;
43		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
44		enable-active-high;
45	};
46
47	reg_usb_hub: regulator-usb-hub {
48		compatible = "regulator-fixed";
49		pinctrl-names = "default";
50		pinctrl-0 = <&pinctrl_reg_usb_hub>;
51		regulator-name = "USB_HUB";
52		regulator-min-microvolt = <5000000>;
53		regulator-max-microvolt = <5000000>;
54		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
55		enable-active-high;
56	};
57};
58
59&A53_0 {
60	cpu-supply = <&buck2>;
61};
62
63&A53_1 {
64	cpu-supply = <&buck2>;
65};
66
67&A53_2 {
68	cpu-supply = <&buck2>;
69};
70
71&A53_3 {
72	cpu-supply = <&buck2>;
73};
74
75&eqos {
76	pinctrl-names = "default";
77	pinctrl-0 = <&pinctrl_eqos>;
78	phy-mode = "rgmii-id";
79	phy-handle = <&ethphy0>;
80	status = "okay";
81
82	mdio {
83		compatible = "snps,dwmac-mdio";
84		#address-cells = <1>;
85		#size-cells = <0>;
86
87		ethphy0: ethernet-phy@0 { /* RTL8211E */
88			compatible = "ethernet-phy-ieee802.3-c22";
89			reg = <0>;
90			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
91			reset-assert-us = <20>;
92			reset-deassert-us = <200000>;
93		};
94	};
95};
96
97&i2c1 {
98	clock-frequency = <400000>;
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_i2c1>;
101	status = "okay";
102
103	pmic@25 {
104		compatible = "nxp,pca9450c";
105		reg = <0x25>;
106		pinctrl-names = "default";
107		pinctrl-0 = <&pinctrl_pmic>;
108		interrupt-parent = <&gpio1>;
109		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
110
111		regulators {
112			buck1: BUCK1 {
113				regulator-name = "BUCK1";
114				regulator-min-microvolt = <600000>;
115				regulator-max-microvolt = <2187500>;
116				regulator-boot-on;
117				regulator-always-on;
118				regulator-ramp-delay = <3125>;
119			};
120
121			buck2: BUCK2 {
122				regulator-name = "BUCK2";
123				regulator-min-microvolt = <600000>;
124				regulator-max-microvolt = <2187500>;
125				regulator-boot-on;
126				regulator-always-on;
127				regulator-ramp-delay = <3125>;
128				nxp,dvs-run-voltage = <950000>;
129				nxp,dvs-standby-voltage = <850000>;
130			};
131
132			buck4: BUCK4 {
133				regulator-name = "BUCK4";
134				regulator-min-microvolt = <600000>;
135				regulator-max-microvolt = <3400000>;
136				regulator-boot-on;
137				regulator-always-on;
138			};
139
140			buck5: BUCK5 {
141				regulator-name = "BUCK5";
142				regulator-min-microvolt = <600000>;
143				regulator-max-microvolt = <3400000>;
144				regulator-boot-on;
145				regulator-always-on;
146			};
147
148			buck6: BUCK6 {
149				regulator-name = "BUCK6";
150				regulator-min-microvolt = <600000>;
151				regulator-max-microvolt = <3400000>;
152				regulator-boot-on;
153				regulator-always-on;
154			};
155
156			ldo1: LDO1 {
157				regulator-name = "LDO1";
158				regulator-min-microvolt = <1600000>;
159				regulator-max-microvolt = <3300000>;
160				regulator-boot-on;
161				regulator-always-on;
162			};
163
164			ldo2: LDO2 {
165				regulator-name = "LDO2";
166				regulator-min-microvolt = <800000>;
167				regulator-max-microvolt = <1150000>;
168				regulator-boot-on;
169				regulator-always-on;
170			};
171
172			ldo3: LDO3 {
173				regulator-name = "LDO3";
174				regulator-min-microvolt = <800000>;
175				regulator-max-microvolt = <3300000>;
176				regulator-boot-on;
177				regulator-always-on;
178			};
179
180			ldo4: LDO4 {
181				regulator-name = "LDO4";
182				regulator-min-microvolt = <800000>;
183				regulator-max-microvolt = <3300000>;
184				regulator-boot-on;
185				regulator-always-on;
186			};
187
188			ldo5: LDO5 {
189				regulator-name = "LDO5";
190				regulator-min-microvolt = <1800000>;
191				regulator-max-microvolt = <3300000>;
192				regulator-boot-on;
193				regulator-always-on;
194			};
195		};
196	};
197};
198
199&i2c2 {
200	clock-frequency = <100000>;
201	pinctrl-names = "default";
202	pinctrl-0 = <&pinctrl_i2c2>;
203	status = "okay";
204};
205
206&i2c3 {
207	clock-frequency = <400000>;
208	pinctrl-names = "default";
209	pinctrl-0 = <&pinctrl_i2c3>;
210	status = "okay";
211};
212
213&i2c4 {
214	clock-frequency = <100000>;
215	pinctrl-names = "default";
216	pinctrl-0 = <&pinctrl_i2c4>;
217	status = "okay";
218
219	eeprom@50 {
220		compatible = "atmel,24c02";
221		reg = <0x50>;
222		pagesize = <16>;
223	};
224
225	rtc@51 {
226		compatible = "haoyu,hym8563";
227		reg = <0x51>;
228		#clock-cells = <0>;
229		clock-output-names = "xin32k";
230		interrupt-parent = <&gpio2>;
231		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
232		pinctrl-names = "default";
233		pinctrl-0 = <&pinctrl_rtc_int>;
234	};
235};
236
237&i2c6 {
238	clock-frequency = <400000>;
239	pinctrl-names = "default";
240	pinctrl-0 = <&pinctrl_i2c6>;
241	status = "okay";
242};
243
244&snvs_pwrkey {
245	status = "okay";
246};
247
248&uart2 {
249	/* console */
250	pinctrl-names = "default";
251	pinctrl-0 = <&pinctrl_uart2>;
252	status = "okay";
253};
254
255&uart3 {
256	pinctrl-names = "default";
257	pinctrl-0 = <&pinctrl_uart3>;
258	status = "okay";
259};
260
261&uart4 {
262	pinctrl-names = "default";
263	pinctrl-0 = <&pinctrl_uart4>;
264	status = "okay";
265};
266
267&usb3_phy1 {
268	status = "okay";
269};
270
271&usb3_1 {
272	status = "okay";
273};
274
275&usb_dwc3_1 {
276	#address-cells = <1>;
277	#size-cells = <0>;
278	pinctrl-names = "default";
279	pinctrl-0 = <&pinctrl_usb1>;
280	dr_mode = "host";
281	status = "okay";
282
283	/* 2.x hub on port 1 */
284	usb_hub_2_x: hub@1 {
285		compatible = "usbbda,5411";
286		reg = <1>;
287		vdd-supply = <&reg_usb_hub>;
288		peer-hub = <&usb_hub_3_x>;
289	};
290
291	/* 3.x hub on port 2 */
292	usb_hub_3_x: hub@2 {
293		compatible = "usbbda,411";
294		reg = <2>;
295		vdd-supply = <&reg_usb_hub>;
296		peer-hub = <&usb_hub_2_x>;
297	};
298};
299
300/* SD Card */
301&usdhc2 {
302	pinctrl-names = "default", "state_100mhz", "state_200mhz";
303	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
304	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
305	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
306	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
307	vmmc-supply = <&reg_usdhc2_vmmc>;
308	bus-width = <4>;
309	status = "okay";
310};
311
312/* eMMC */
313&usdhc3 {
314	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
315	assigned-clock-rates = <400000000>;
316	pinctrl-names = "default", "state_100mhz", "state_200mhz";
317	pinctrl-0 = <&pinctrl_usdhc3>;
318	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
319	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
320	bus-width = <8>;
321	non-removable;
322	status = "okay";
323};
324
325&wdog1 {
326	pinctrl-names = "default";
327	pinctrl-0 = <&pinctrl_wdog>;
328	fsl,ext-reset-output;
329	status = "okay";
330};
331
332&iomuxc {
333	pinctrl_eqos: eqosgrp {
334		fsl,pins = <
335			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
336			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
337			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
338			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
339			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
340			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
341			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
342			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
343			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
344			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
345			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
346			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
347			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
348			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
349			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
350			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT			0x1f
351			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
352		>;
353	};
354
355	pinctrl_gpio_led: gpioledgrp {
356		fsl,pins = <
357			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
358		>;
359	};
360
361	pinctrl_i2c1: i2c1grp {
362		fsl,pins = <
363			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
364			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c2
365		>;
366	};
367
368	pinctrl_i2c2: i2c2grp {
369		fsl,pins = <
370			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c2
371			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c2
372		>;
373	};
374
375	pinctrl_i2c3: i2c3grp {
376		fsl,pins = <
377			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c2
378			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c2
379		>;
380	};
381
382	pinctrl_i2c4: i2c4grp {
383		fsl,pins = <
384			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
385			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
386		>;
387	};
388
389	pinctrl_i2c6: i2c6grp {
390		fsl,pins = <
391			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL				0x400001c3
392			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA					0x400001c3
393		>;
394	};
395
396	pinctrl_pmic: pmicirqgrp {
397		fsl,pins = <
398			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
399		>;
400	};
401
402	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
403		fsl,pins = <
404			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
405		>;
406	};
407
408	pinctrl_reg_usb_hub: regusbhubgrp {
409		fsl,pins = <
410			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26				0x19
411		>;
412	};
413
414	pinctrl_rtc_int: rtcintgrp {
415		fsl,pins = <
416			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x140
417		>;
418	};
419
420	pinctrl_uart2: uart2grp {
421		fsl,pins = <
422			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x14f
423			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x14f
424		>;
425	};
426
427	pinctrl_uart3: uart3grp {
428		fsl,pins = <
429			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX				0x49
430			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX				0x49
431		>;
432	};
433
434	pinctrl_uart4: uart4grp {
435		fsl,pins = <
436			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x49
437			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x49
438		>;
439	};
440
441	pinctrl_usb1: usb1grp {
442		fsl,pins = <
443			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
444		>;
445	};
446
447	pinctrl_usdhc2: usdhc2grp {
448		fsl,pins = <
449			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
450			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
451			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
452			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
453			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
454			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
455		>;
456	};
457
458	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
459		fsl,pins = <
460			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
461			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
462			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
463			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
464			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
465			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
466		>;
467	};
468
469	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
470		fsl,pins = <
471			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
472			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
473			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
474			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
475			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
476			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
477		>;
478	};
479
480	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
481		fsl,pins = <
482			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
483		>;
484	};
485
486	pinctrl_usdhc3: usdhc3grp {
487		fsl,pins = <
488			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
489			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
490			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
491			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
492			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
493			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
494			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
495			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
496			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
497			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
498			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
499		>;
500	};
501
502	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
503		fsl,pins = <
504			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
505			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
506			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
507			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
508			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
509			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
510			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
511			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
512			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
513			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
514			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
515		>;
516	};
517
518	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
519		fsl,pins = <
520			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
521			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
522			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
523			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
524			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
525			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
526			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
527			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
528			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
529			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
530			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
531		>;
532	};
533
534	pinctrl_wdog: wdoggrp {
535		fsl,pins = <
536			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
537		>;
538	};
539};
540