1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, 4 * D-82229 Seefeld, Germany. 5 * Author: Gregor Herburger 6 */ 7 8#include "fsl-lx2160a.dtsi" 9 10/ { 11 reg_vcc3v3: regulator-vcc3v3 { 12 compatible = "regulator-fixed"; 13 regulator-name = "VCC3V3"; 14 regulator-min-microvolt = <3300000>; 15 regulator-max-microvolt = <3300000>; 16 regulator-always-on; 17 }; 18}; 19 20 21&emdio1 { 22 status = "okay"; 23}; 24 25&emdio2 { 26 status = "okay"; 27}; 28 29&esdhc1 { 30 bus-width = <8>; 31 no-sd; 32 no-sdio; 33 non-removable; 34 mmc-hs200-1_8v; 35 status = "okay"; 36}; 37 38&fspi { 39 status = "okay"; 40 41 flash0: flash@0 { 42 compatible = "jedec,spi-nor"; 43 reg = <0>; 44 #address-cells = <1>; 45 #size-cells = <1>; 46 spi-max-frequency = <10000000>; 47 spi-rx-bus-width = <1>; 48 spi-tx-bus-width = <1>; 49 50 partitions { 51 compatible = "fixed-partitions"; 52 #address-cells = <1>; 53 #size-cells = <1>; 54 }; 55 }; 56 57 flash1: flash@1 { 58 compatible = "jedec,spi-nor"; 59 reg = <1>; 60 #address-cells = <1>; 61 #size-cells = <1>; 62 spi-max-frequency = <10000000>; 63 spi-rx-bus-width = <1>; 64 spi-tx-bus-width = <1>; 65 }; 66}; 67 68&i2c0 { 69 scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; 70 status = "okay"; 71 72 sensor0: temperature-sensor@1f { 73 compatible = "nxp,se97", "jedec,jc-42.4-temp"; 74 reg = <0x1f>; 75 }; 76 77 eeprom1: eeprom@57 { 78 compatible = "atmel,24c02"; 79 reg = <0x57>; 80 pagesize = <16>; 81 read-only; 82 vcc-supply = <®_vcc3v3>; 83 }; 84 85 rtc: rtc@51 { 86 compatible = "nxp,pcf85063a"; 87 reg = <0x51>; 88 quartz-load-femtofarads = <12500>; 89 }; 90 91 eeprom2: eeprom@50 { 92 compatible = "atmel,24c64"; 93 reg = <0x50>; 94 pagesize = <32>; 95 vcc-supply = <®_vcc3v3>; 96 }; 97}; 98