xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/fsl-lx2160a-rdb.dts (revision 3a3af6b2a160bea72509a9d5ef84e25906b0478a) 
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Device Tree file for LX2160ARDB
4//
5// Copyright 2018-2020 NXP
6
7/dts-v1/;
8
9#include "fsl-lx2160a.dtsi"
10
11/ {
12	model = "NXP Layerscape LX2160ARDB";
13	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
14
15	aliases {
16		crypto = &crypto;
17		mmc0 = &esdhc0;
18		mmc1 = &esdhc1;
19		serial0 = &uart0;
20	};
21
22	chosen {
23		stdout-path = "serial0:115200n8";
24	};
25
26	sb_3v3: regulator-sb3v3 {
27		compatible = "regulator-fixed";
28		regulator-name = "MC34717-3.3VSB";
29		regulator-min-microvolt = <3300000>;
30		regulator-max-microvolt = <3300000>;
31		regulator-boot-on;
32		regulator-always-on;
33	};
34};
35
36&crypto {
37	status = "okay";
38};
39
40&dpmac3 {
41	phy-handle = <&aquantia_phy1>;
42	phy-connection-type = "usxgmii";
43	managed = "in-band-status";
44};
45
46&dpmac4 {
47	phy-handle = <&aquantia_phy2>;
48	phy-connection-type = "usxgmii";
49	managed = "in-band-status";
50};
51
52&dpmac5 {
53	phy-handle = <&inphi_phy>;
54};
55
56&dpmac6 {
57	phy-handle = <&inphi_phy>;
58};
59
60&dpmac17 {
61	phy-handle = <&rgmii_phy1>;
62	phy-connection-type = "rgmii-id";
63};
64
65&dpmac18 {
66	phy-handle = <&rgmii_phy2>;
67	phy-connection-type = "rgmii-id";
68};
69
70&emdio1 {
71	status = "okay";
72
73	rgmii_phy1: ethernet-phy@1 {
74		/* AR8035 PHY */
75		compatible = "ethernet-phy-id004d.d072";
76		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
77		reg = <0x1>;
78		eee-broken-1000t;
79	};
80
81	rgmii_phy2: ethernet-phy@2 {
82		/* AR8035 PHY */
83		compatible = "ethernet-phy-id004d.d072";
84		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
85		reg = <0x2>;
86		eee-broken-1000t;
87	};
88
89	aquantia_phy1: ethernet-phy@4 {
90		/* AQR107 PHY */
91		compatible = "ethernet-phy-ieee802.3-c45";
92		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
93		reg = <0x4>;
94	};
95
96	aquantia_phy2: ethernet-phy@5 {
97		/* AQR107 PHY */
98		compatible = "ethernet-phy-ieee802.3-c45";
99		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
100		reg = <0x5>;
101	};
102};
103
104&can0 {
105	status = "okay";
106
107	can-transceiver {
108		max-bitrate = <5000000>;
109	};
110};
111
112&can1 {
113	status = "okay";
114
115	can-transceiver {
116		max-bitrate = <5000000>;
117	};
118};
119
120&emdio2 {
121	status = "okay";
122
123	inphi_phy: ethernet-phy@0 {
124		compatible = "ethernet-phy-id0210.7440";
125		reg = <0x0>;
126	};
127};
128
129&esdhc0 {
130	sd-uhs-sdr104;
131	sd-uhs-sdr50;
132	sd-uhs-sdr25;
133	sd-uhs-sdr12;
134	status = "okay";
135};
136
137&esdhc1 {
138	mmc-hs200-1_8v;
139	mmc-hs400-1_8v;
140	bus-width = <8>;
141	status = "okay";
142};
143
144&fspi {
145	status = "okay";
146
147	mt35xu512aba0: flash@0 {
148		#address-cells = <1>;
149		#size-cells = <1>;
150		compatible = "jedec,spi-nor";
151		m25p,fast-read;
152		spi-max-frequency = <50000000>;
153		reg = <0>;
154		spi-rx-bus-width = <8>;
155		spi-tx-bus-width = <8>;
156	};
157
158	mt35xu512aba1: flash@1 {
159		#address-cells = <1>;
160		#size-cells = <1>;
161		compatible = "jedec,spi-nor";
162		m25p,fast-read;
163		spi-max-frequency = <50000000>;
164		reg = <1>;
165		spi-rx-bus-width = <8>;
166		spi-tx-bus-width = <8>;
167	};
168};
169
170&i2c0 {
171	status = "okay";
172
173	i2c-mux@77 {
174		compatible = "nxp,pca9547";
175		reg = <0x77>;
176		#address-cells = <1>;
177		#size-cells = <0>;
178
179		i2c@2 {
180			#address-cells = <1>;
181			#size-cells = <0>;
182			reg = <0x2>;
183
184			power-monitor@40 {
185				compatible = "ti,ina220";
186				reg = <0x40>;
187				shunt-resistor = <500>;
188			};
189		};
190
191		i2c@3 {
192			#address-cells = <1>;
193			#size-cells = <0>;
194			reg = <0x3>;
195
196			temperature-sensor@4c {
197				compatible = "nxp,sa56004";
198				reg = <0x4c>;
199				vcc-supply = <&sb_3v3>;
200			};
201
202			temperature-sensor@4d {
203				compatible = "nxp,sa56004";
204				reg = <0x4d>;
205				vcc-supply = <&sb_3v3>;
206			};
207		};
208	};
209};
210
211&i2c4 {
212	status = "okay";
213
214	rtc@51 {
215		compatible = "nxp,pcf2129";
216		reg = <0x51>;
217		/* IRQ_RTC_B -> IRQ08, active low */
218		interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
219	};
220};
221
222&optee {
223	status = "okay";
224};
225
226&pcs_mdio3 {
227	status = "okay";
228};
229
230&pcs_mdio4 {
231	status = "okay";
232};
233
234&sata0 {
235	status = "okay";
236};
237
238&sata1 {
239	status = "okay";
240};
241
242&sata2 {
243	status = "okay";
244};
245
246&sata3 {
247	status = "okay";
248};
249
250&uart0 {
251	status = "okay";
252};
253
254&uart1 {
255	status = "okay";
256};
257
258&usb0 {
259	status = "okay";
260};
261
262&usb1 {
263	status = "okay";
264};
265