1// SPDX-License-Identifier: (GPL-2.0 OR MIT) 2// 3// Device Tree file for LX2160A Clearfog ITX board; this contains the 4// common parts shared between the Clearfog CX and Honeycomb builds. 5// 6// Copyright 2019 SolidRun Ltd. 7 8/dts-v1/; 9 10#include "fsl-lx2160a-cex7.dtsi" 11#include <dt-bindings/input/linux-event-codes.h> 12 13/ { 14 aliases { 15 serial0 = &uart0; 16 serial1 = &uart1; 17 }; 18 19 chosen { 20 stdout-path = "serial0:115200n8"; 21 }; 22 23 gpio-keys { 24 compatible = "gpio-keys"; 25 26 key { 27 label = "power"; 28 linux,can-disable; 29 linux,code = <KEY_POWER>; 30 gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; 31 }; 32 }; 33 34 sfp0: sfp-0 { 35 compatible = "sff,sfp"; 36 i2c-bus = <&sfp0_i2c>; 37 mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; 38 maximum-power-milliwatt = <2000>; 39 }; 40 41 sfp1: sfp-1 { 42 compatible = "sff,sfp"; 43 i2c-bus = <&sfp1_i2c>; 44 mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>; 45 maximum-power-milliwatt = <2000>; 46 }; 47 48 sfp2: sfp-2 { 49 compatible = "sff,sfp"; 50 i2c-bus = <&sfp2_i2c>; 51 mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; 52 maximum-power-milliwatt = <2000>; 53 }; 54 55 sfp3: sfp-3 { 56 compatible = "sff,sfp"; 57 i2c-bus = <&sfp3_i2c>; 58 mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; 59 maximum-power-milliwatt = <2000>; 60 }; 61}; 62 63&dpmac7 { 64 sfp = <&sfp0>; 65 managed = "in-band-status"; 66 phys = <&serdes_1 3>; 67}; 68 69&dpmac8 { 70 sfp = <&sfp1>; 71 managed = "in-band-status"; 72 phys = <&serdes_1 2>; 73}; 74 75&dpmac9 { 76 sfp = <&sfp2>; 77 managed = "in-band-status"; 78 phys = <&serdes_1 1>; 79}; 80 81&dpmac10 { 82 sfp = <&sfp3>; 83 managed = "in-band-status"; 84 phys = <&serdes_1 0>; 85}; 86 87&emdio2 { 88 status = "okay"; 89}; 90 91&esdhc0 { 92 sd-uhs-sdr104; 93 sd-uhs-sdr50; 94 sd-uhs-sdr25; 95 sd-uhs-sdr12; 96 status = "okay"; 97}; 98 99&pcs_mdio7 { 100 status = "okay"; 101}; 102 103&pcs_mdio8 { 104 status = "okay"; 105}; 106 107&pcs_mdio9 { 108 status = "okay"; 109}; 110 111&pcs_mdio10 { 112 status = "okay"; 113}; 114 115&sata0 { 116 status = "okay"; 117}; 118 119&sata1 { 120 status = "okay"; 121}; 122 123&sata2 { 124 status = "okay"; 125}; 126 127&sata3 { 128 status = "okay"; 129}; 130 131&uart0 { 132 status = "okay"; 133}; 134 135&uart1 { 136 status = "okay"; 137}; 138