xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/fsl-lx2160a-bluebox3.dts (revision b197d4b893974c9eb4d7b38704c6d5c486235d6f) 
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Device Tree file for LX2160A BLUEBOX3
4//
5// Copyright 2020-2021 NXP
6
7/dts-v1/;
8
9#include "fsl-lx2160a.dtsi"
10
11/ {
12	model = "NXP Layerscape LX2160ABLUEBOX3";
13	compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a";
14
15	aliases {
16		crypto = &crypto;
17		mmc0 = &esdhc0;
18		mmc1 = &esdhc1;
19		serial0 = &uart0;
20	};
21
22	chosen {
23		stdout-path = "serial0:115200n8";
24	};
25
26	sb_3v3: regulator-sb3v3 {
27		compatible = "regulator-fixed";
28		regulator-name = "MC34717-3.3VSB";
29		regulator-min-microvolt = <3300000>;
30		regulator-max-microvolt = <3300000>;
31		regulator-boot-on;
32		regulator-always-on;
33	};
34};
35
36&can0 {
37	status = "okay";
38
39	can-transceiver {
40		max-bitrate = <5000000>;
41	};
42};
43
44&can1 {
45	status = "okay";
46
47	can-transceiver {
48		max-bitrate = <5000000>;
49	};
50};
51
52&crypto {
53	status = "okay";
54};
55
56&dpmac5 {
57	phy-handle = <&aqr113c_phy1>;
58	phy-mode = "usxgmii";
59	managed = "in-band-status";
60};
61
62&dpmac6 {
63	phy-handle = <&aqr113c_phy2>;
64	phy-mode = "usxgmii";
65	managed = "in-band-status";
66};
67
68&dpmac9 {
69	phy-handle = <&aqr113c_phy3>;
70	phy-mode = "usxgmii";
71	managed = "in-band-status";
72};
73
74&dpmac10 {
75	phy-handle = <&aqr113c_phy4>;
76	phy-mode = "usxgmii";
77	managed = "in-band-status";
78};
79
80&dpmac17 {
81	phy-mode = "rgmii";
82	status = "okay";
83
84	fixed-link {
85		speed = <1000>;
86		full-duplex;
87	};
88};
89
90&dpmac18 {
91	phy-mode = "rgmii";
92	status = "okay";
93
94	fixed-link {
95		speed = <1000>;
96		full-duplex;
97	};
98};
99
100&emdio1 {
101	status = "okay";
102
103	aqr113c_phy2: ethernet-phy@0 {
104		compatible = "ethernet-phy-ieee802.3-c45";
105		reg = <0x0>;
106		/* IRQ_10G_PHY2 */
107		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
108	};
109
110	aqr113c_phy1: ethernet-phy@8 {
111		compatible = "ethernet-phy-ieee802.3-c45";
112		reg = <0x8>;
113		/* IRQ_10G_PHY1 */
114		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
115	};
116
117	sw1_mii3_phy: ethernet-phy@5 {
118		/* AR8035 */
119		compatible = "ethernet-phy-id004d.d072";
120		reg = <0x5>;
121		interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
122	};
123
124	sw2_mii3_phy: ethernet-phy@6 {
125		/* AR8035 */
126		compatible = "ethernet-phy-id004d.d072";
127		reg = <0x6>;
128		interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
129	};
130};
131
132&emdio2 {
133	status = "okay";
134
135	aqr113c_phy4: ethernet-phy@0 {
136		compatible = "ethernet-phy-ieee802.3-c45";
137		reg = <0x0>;
138		/* IRQ_10G_PHY4 */
139		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
140	};
141
142	aqr113c_phy3: ethernet-phy@8 {
143		compatible = "ethernet-phy-ieee802.3-c45";
144		reg = <0x8>;
145		/* IRQ_10G_PHY3 */
146		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
147	};
148};
149
150&esdhc0 {
151	sd-uhs-sdr104;
152	sd-uhs-sdr50;
153	sd-uhs-sdr25;
154	sd-uhs-sdr12;
155	status = "okay";
156};
157
158&esdhc1 {
159	mmc-hs200-1_8v;
160	mmc-hs400-1_8v;
161	bus-width = <8>;
162	status = "okay";
163};
164
165&fspi {
166	status = "okay";
167
168	mt35xu512aba0: flash@0 {
169		compatible = "jedec,spi-nor";
170		#address-cells = <1>;
171		#size-cells = <1>;
172		reg = <0>;
173		m25p,fast-read;
174		spi-max-frequency = <50000000>;
175		spi-rx-bus-width = <8>;
176		spi-tx-bus-width = <8>;
177	};
178
179	mt35xu512aba1: flash@1 {
180		compatible = "jedec,spi-nor";
181		#address-cells = <1>;
182		#size-cells = <1>;
183		reg = <1>;
184		m25p,fast-read;
185		spi-max-frequency = <50000000>;
186		spi-rx-bus-width = <8>;
187		spi-tx-bus-width = <8>;
188	};
189};
190
191&i2c0 {
192	status = "okay";
193
194	i2c-mux@77 {
195		compatible = "nxp,pca9547";
196		reg = <0x77>;
197		#address-cells = <1>;
198		#size-cells = <0>;
199
200		i2c@2 {
201			#address-cells = <1>;
202			#size-cells = <0>;
203			reg = <0x2>;
204
205			power-monitor@40 {
206				compatible = "ti,ina220";
207				reg = <0x40>;
208				shunt-resistor = <500>;
209			};
210		};
211
212		i2c@3 {
213			#address-cells = <1>;
214			#size-cells = <0>;
215			reg = <0x3>;
216
217			temp2: temperature-sensor@48 {
218				compatible = "nxp,sa56004";
219				reg = <0x48>;
220				vcc-supply = <&sb_3v3>;
221				#thermal-sensor-cells = <1>;
222			};
223
224			temp1: temperature-sensor@4c {
225				compatible = "nxp,sa56004";
226				reg = <0x4c>;
227				vcc-supply = <&sb_3v3>;
228				#thermal-sensor-cells = <1>;
229			};
230		};
231
232		i2c@4 {
233			#address-cells = <1>;
234			#size-cells = <0>;
235			reg = <0x4>;
236
237			rtc@51 {
238				compatible = "nxp,pcf2129";
239				reg = <0x51>;
240				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
241			};
242		};
243
244		i2c@7 {
245			#address-cells = <1>;
246			#size-cells = <0>;
247			reg = <0x7>;
248
249			i2c-mux@75 {
250				compatible = "nxp,pca9547";
251				reg = <0x75>;
252				#address-cells = <1>;
253				#size-cells = <0>;
254
255				i2c@0 {
256					#address-cells = <1>;
257					#size-cells = <0>;
258					reg = <0x0>;
259
260					spi_bridge: spi@28 {
261						compatible = "nxp,sc18is602b";
262						reg = <0x28>;
263						#address-cells = <1>;
264						#size-cells = <0>;
265					};
266				};
267			};
268		};
269	};
270};
271
272&i2c5 {
273	status = "okay";
274
275	i2c-mux@77 {
276		compatible = "nxp,pca9846";
277		reg = <0x77>;
278		#address-cells = <1>;
279		#size-cells = <0>;
280
281		i2c@1 {
282			#address-cells = <1>;
283			#size-cells = <0>;
284			reg = <0x1>;
285
286			/* The I2C multiplexer and temperature sensors are on
287			 * the T6 riser card.
288			 */
289			i2c-mux@70 {
290				compatible = "nxp,pca9548";
291				reg = <0x70>;
292				#address-cells = <1>;
293				#size-cells = <0>;
294
295				i2c@6 {
296					#address-cells = <1>;
297					#size-cells = <0>;
298					reg = <0x6>;
299
300					q12: temperature-sensor@4c {
301						compatible = "nxp,sa56004";
302						reg = <0x4c>;
303						vcc-supply = <&sb_3v3>;
304						#thermal-sensor-cells = <1>;
305					};
306				};
307
308				i2c@7 {
309					#address-cells = <1>;
310					#size-cells = <0>;
311					reg = <0x7>;
312
313					q11: temperature-sensor@4c {
314						compatible = "nxp,sa56004";
315						reg = <0x4c>;
316						vcc-supply = <&sb_3v3>;
317						#thermal-sensor-cells = <1>;
318					};
319
320					q13: temperature-sensor@48 {
321						compatible = "nxp,sa56004";
322						reg = <0x48>;
323						vcc-supply = <&sb_3v3>;
324						#thermal-sensor-cells = <1>;
325					};
326
327					q14: temperature-sensor@4a {
328						compatible = "nxp,sa56004";
329						reg = <0x4a>;
330						vcc-supply = <&sb_3v3>;
331						#thermal-sensor-cells = <1>;
332					};
333				};
334			};
335		};
336	};
337};
338
339&pcs_mdio5 {
340	status = "okay";
341};
342
343&pcs_mdio6 {
344	status = "okay";
345};
346
347&pcs_mdio9 {
348	status = "okay";
349};
350
351&pcs_mdio10 {
352	status = "okay";
353};
354
355&spi_bridge {
356	sw1: ethernet-switch@0 {
357		compatible = "nxp,sja1110a";
358		reg = <0>;
359		spi-max-frequency = <4000000>;
360		spi-cpol;
361		dsa,member = <0 0>;
362
363		ethernet-ports {
364			#address-cells = <1>;
365			#size-cells = <0>;
366
367			/* Microcontroller port */
368			port@0 {
369				reg = <0>;
370				status = "disabled";
371			};
372
373			/* SW1_P1 */
374			port@1 {
375				reg = <1>;
376				label = "con_2x20";
377				phy-mode = "sgmii";
378
379				fixed-link {
380					speed = <1000>;
381					full-duplex;
382				};
383			};
384
385			port@2 {
386				reg = <2>;
387				ethernet = <&dpmac17>;
388				phy-mode = "rgmii-id";
389				rx-internal-delay-ps = <2000>;
390				tx-internal-delay-ps = <2000>;
391
392				fixed-link {
393					speed = <1000>;
394					full-duplex;
395				};
396			};
397
398			port@3 {
399				reg = <3>;
400				label = "1ge_p1";
401				phy-mode = "rgmii-id";
402				phy-handle = <&sw1_mii3_phy>;
403			};
404
405			sw1p4: port@4 {
406				reg = <4>;
407				link = <&sw2p1>;
408				phy-mode = "sgmii";
409
410				fixed-link {
411					speed = <1000>;
412					full-duplex;
413				};
414			};
415
416			port@5 {
417				reg = <5>;
418				label = "trx1";
419				phy-mode = "internal";
420				phy-handle = <&sw1_port5_base_t1_phy>;
421			};
422
423			port@6 {
424				reg = <6>;
425				label = "trx2";
426				phy-mode = "internal";
427				phy-handle = <&sw1_port6_base_t1_phy>;
428			};
429
430			port@7 {
431				reg = <7>;
432				label = "trx3";
433				phy-mode = "internal";
434				phy-handle = <&sw1_port7_base_t1_phy>;
435			};
436
437			port@8 {
438				reg = <8>;
439				label = "trx4";
440				phy-mode = "internal";
441				phy-handle = <&sw1_port8_base_t1_phy>;
442			};
443
444			port@9 {
445				reg = <9>;
446				label = "trx5";
447				phy-mode = "internal";
448				phy-handle = <&sw1_port9_base_t1_phy>;
449			};
450
451			port@a {
452				reg = <10>;
453				label = "trx6";
454				phy-mode = "internal";
455				phy-handle = <&sw1_port10_base_t1_phy>;
456			};
457		};
458
459		mdios {
460			#address-cells = <1>;
461			#size-cells = <0>;
462
463			mdio@0 {
464				compatible = "nxp,sja1110-base-t1-mdio";
465				#address-cells = <1>;
466				#size-cells = <0>;
467				reg = <0>;
468
469				sw1_port5_base_t1_phy: ethernet-phy@1 {
470					compatible = "ethernet-phy-ieee802.3-c45";
471					reg = <0x1>;
472				};
473
474				sw1_port6_base_t1_phy: ethernet-phy@2 {
475					compatible = "ethernet-phy-ieee802.3-c45";
476					reg = <0x2>;
477				};
478
479				sw1_port7_base_t1_phy: ethernet-phy@3 {
480					compatible = "ethernet-phy-ieee802.3-c45";
481					reg = <0x3>;
482				};
483
484				sw1_port8_base_t1_phy: ethernet-phy@4 {
485					compatible = "ethernet-phy-ieee802.3-c45";
486					reg = <0x4>;
487				};
488
489				sw1_port9_base_t1_phy: ethernet-phy@5 {
490					compatible = "ethernet-phy-ieee802.3-c45";
491					reg = <0x5>;
492				};
493
494				sw1_port10_base_t1_phy: ethernet-phy@6 {
495					compatible = "ethernet-phy-ieee802.3-c45";
496					reg = <0x6>;
497				};
498			};
499		};
500	};
501
502	sw2: ethernet-switch@2 {
503		compatible = "nxp,sja1110a";
504		reg = <2>;
505		spi-max-frequency = <4000000>;
506		spi-cpol;
507		dsa,member = <0 1>;
508
509		ethernet-ports {
510			#address-cells = <1>;
511			#size-cells = <0>;
512
513			/* Microcontroller port */
514			port@0 {
515				reg = <0>;
516				status = "disabled";
517			};
518
519			sw2p1: port@1 {
520				reg = <1>;
521				link = <&sw1p4>;
522				phy-mode = "sgmii";
523
524				fixed-link {
525					speed = <1000>;
526					full-duplex;
527				};
528			};
529
530			port@2 {
531				reg = <2>;
532				ethernet = <&dpmac18>;
533				phy-mode = "rgmii-id";
534				rx-internal-delay-ps = <2000>;
535				tx-internal-delay-ps = <2000>;
536
537				fixed-link {
538					speed = <1000>;
539					full-duplex;
540				};
541			};
542
543			port@3 {
544				reg = <3>;
545				label = "1ge_p2";
546				phy-mode = "rgmii-id";
547				phy-handle = <&sw2_mii3_phy>;
548			};
549
550			port@4 {
551				reg = <4>;
552				label = "to_sw3";
553				phy-mode = "2500base-x";
554
555				fixed-link {
556					speed = <2500>;
557					full-duplex;
558				};
559			};
560
561			port@5 {
562				reg = <5>;
563				label = "trx7";
564				phy-mode = "internal";
565				phy-handle = <&sw2_port5_base_t1_phy>;
566			};
567
568			port@6 {
569				reg = <6>;
570				label = "trx8";
571				phy-mode = "internal";
572				phy-handle = <&sw2_port6_base_t1_phy>;
573			};
574
575			port@7 {
576				reg = <7>;
577				label = "trx9";
578				phy-mode = "internal";
579				phy-handle = <&sw2_port7_base_t1_phy>;
580			};
581
582			port@8 {
583				reg = <8>;
584				label = "trx10";
585				phy-mode = "internal";
586				phy-handle = <&sw2_port8_base_t1_phy>;
587			};
588
589			port@9 {
590				reg = <9>;
591				label = "trx11";
592				phy-mode = "internal";
593				phy-handle = <&sw2_port9_base_t1_phy>;
594			};
595
596			port@a {
597				reg = <10>;
598				label = "trx12";
599				phy-mode = "internal";
600				phy-handle = <&sw2_port10_base_t1_phy>;
601			};
602		};
603
604		mdios {
605			#address-cells = <1>;
606			#size-cells = <0>;
607
608			mdio@0 {
609				compatible = "nxp,sja1110-base-t1-mdio";
610				#address-cells = <1>;
611				#size-cells = <0>;
612				reg = <0>;
613
614				sw2_port5_base_t1_phy: ethernet-phy@1 {
615					compatible = "ethernet-phy-ieee802.3-c45";
616					reg = <0x1>;
617				};
618
619				sw2_port6_base_t1_phy: ethernet-phy@2 {
620					compatible = "ethernet-phy-ieee802.3-c45";
621					reg = <0x2>;
622				};
623
624				sw2_port7_base_t1_phy: ethernet-phy@3 {
625					compatible = "ethernet-phy-ieee802.3-c45";
626					reg = <0x3>;
627				};
628
629				sw2_port8_base_t1_phy: ethernet-phy@4 {
630					compatible = "ethernet-phy-ieee802.3-c45";
631					reg = <0x4>;
632				};
633
634				sw2_port9_base_t1_phy: ethernet-phy@5 {
635					compatible = "ethernet-phy-ieee802.3-c45";
636					reg = <0x5>;
637				};
638
639				sw2_port10_base_t1_phy: ethernet-phy@6 {
640					compatible = "ethernet-phy-ieee802.3-c45";
641					reg = <0x6>;
642				};
643			};
644		};
645	};
646};
647
648&uart0 {
649	status = "okay";
650};
651
652&uart1 {
653	status = "okay";
654};
655
656&usb0 {
657	status = "okay";
658};
659
660&usb1 {
661	status = "okay";
662};
663