xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/fsl-ls208xa-rdb.dtsi (revision cfd6422a5217410fbd66f7a7a8a64d9d85e61229) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for Freescale LS2080A RDB Board.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2017 NXP
7 *
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9 *
10 */
11
12&esdhc {
13	status = "okay";
14};
15
16&ifc {
17	status = "okay";
18	#address-cells = <2>;
19	#size-cells = <1>;
20	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
21		  0x2 0x0 0x5 0x30000000 0x00010000
22		  0x3 0x0 0x5 0x20000000 0x00010000>;
23
24	nor@0,0 {
25		#address-cells = <1>;
26		#size-cells = <1>;
27		compatible = "cfi-flash";
28		reg = <0x0 0x0 0x8000000>;
29		bank-width = <2>;
30		device-width = <1>;
31	};
32
33	nand@2,0 {
34	     compatible = "fsl,ifc-nand";
35	     reg = <0x2 0x0 0x10000>;
36	};
37
38	cpld@3,0 {
39	     reg = <0x3 0x0 0x10000>;
40	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
41	};
42
43};
44
45&i2c0 {
46	status = "okay";
47	pca9547@75 {
48		compatible = "nxp,pca9547";
49		reg = <0x75>;
50		#address-cells = <1>;
51		#size-cells = <0>;
52		i2c@1 {
53			#address-cells = <1>;
54			#size-cells = <0>;
55			reg = <0x01>;
56			rtc@68 {
57				compatible = "dallas,ds3232";
58				reg = <0x68>;
59			};
60		};
61
62		i2c@2 {
63			#address-cells = <1>;
64			#size-cells = <0>;
65			reg = <0x02>;
66
67			ina220@40 {
68				compatible = "ti,ina220";
69				reg = <0x40>;
70				shunt-resistor = <500>;
71			};
72		};
73
74		i2c@3 {
75			#address-cells = <1>;
76			#size-cells = <0>;
77			reg = <0x3>;
78
79			adt7481@4c {
80				compatible = "adi,adt7461";
81				reg = <0x4c>;
82			};
83		};
84	};
85};
86
87&i2c1 {
88	status = "disabled";
89};
90
91&i2c2 {
92	status = "disabled";
93};
94
95&i2c3 {
96	status = "disabled";
97};
98
99&dspi {
100	status = "okay";
101	dflash0: n25q512a@0 {
102		#address-cells = <1>;
103		#size-cells = <1>;
104		compatible = "st,m25p80";
105		spi-max-frequency = <3000000>;
106		reg = <0>;
107	};
108};
109
110&qspi {
111	status = "okay";
112
113	s25fs512s0: flash@0 {
114		#address-cells = <1>;
115		#size-cells = <1>;
116		compatible = "jedec,spi-nor";
117		spi-max-frequency = <50000000>;
118		reg = <0>;
119	};
120};
121
122&sata0 {
123	status = "okay";
124};
125
126&sata1 {
127	status = "okay";
128};
129
130&usb0 {
131	status = "okay";
132};
133
134&usb1 {
135	status = "okay";
136};
137